Order lines: 0

Ahlsell Products ElectricTools and Measuring instruments 42

Tools and Measuring instruments 42

42 Measuring instruments

Do you work with electrical installation and need good tools and electrical measuring instruments? Ahlsell helps you find moisture meters, cable finders, and other proper electrical measuring devices in the industry. We have the range regardless of whether you work with commercial properties or private residences. If you want to locate breaks in cables, you need a voltage indicator or an installation tester to test, measure and document according to the installation rules. You will find intelligent electrical measuring instruments with us that measure various materials from most major suppliers. Explore our wide range of tools, electrical measuring instruments, and accessories in the online store, or visit your nearest Ahlsell store.

Products (139)

Multimeter Fluke 117

Multimeter Fluke 117

Art. no.: 4203217

VoltAlert ™ technology for non-contact voltage detection. AutoVolt automatic selection of AC / DC
• Low input impedance: prevents erroneous readings due to leakage current
• Large with white backlight that works in poorly lit places
• True RMS provides accurate measurements of non-linear loads
• Measures 20 A (30 seconds instantaneous, 10 A continuous)
• Resistance, continuity, frequency and capacitance
• Gives min / max / average value to register signal fluctuations
• Compact design for ergonomic use and one-handed grip
• Works with magnetic holders (ToolPak ™) which are available as accessories for use with free hands
• Safety class according to CAT III 600 V

Clamp meter 325

Clamp meter 325

Art. no.: 4200021

Fluke 325 is a basic power cord suitable for electricians working in installation or industrial settings. Fluke 325 is characterized by its compact design, and measures up to 40 and 400A AC/DC with true RMS as well as 600V AC/DC. Resistance, capacitance, frequency, temperature measurement, continuity, and data hold are other functions.

Multimeter digital 170-series

Multimeter digital 170-series

Art. no.: 4203299

The Fluke 170 series sets a new standard for multimeters for general measurements. High construction quality and features together with Fluke's unique lifetime warranty make the Fluke 170 series very reliable working companions. Ergonomic design with integrated holster and large, clear digital display of 6000 points with integrated analog bar graph (backlit on 177 and 179 models). True-RMS AC voltage and current, temperature measurement (Fluke 179), data hold functions, alarm for the wrong connection of power cords, smart battery cover and much more make the Fluke 170 series the electrician’s best choice. Approved in accordance with EN61010-1 Cat IV 600V/Cat III 1000V, UL.
Size (LxWxH): 185 mm x 90 mm x 43 mm, Weight: 0.42 kg.
Included accessories: Test leads, battery, manual, 80BK temperature sensor (Fluke 179)

Voltage tester T-series

Voltage tester T-series

Art. no.: 4200081

Fluke T90: Basic model for voltage and continuity measurement for maintenance.
Fluke T110: Intermediate model for basic voltage and continuity measurement and phase sequence display that can handle dark conditions. CAT IV 600V rating for indoor and outdoor use.
Fluke T130: Intermediate model for basic voltage and continuity measurement as well as phase sequence display that can handle dark conditions with actual voltage measurement on backlit LCD display and data locking functionality.
Fluke T150: Advanced model for advanced troubleshooting of AC and DC systems in all environments and with resistance measurement.

Backlit graded scale and backlit indicators
• Vibrations to provide tactile feedback (T110, T130 and T150)
• Noise on / off when testing in quiet areas
• Battery alarm
• Detects voltage even with discharged batteries
• Improved probe docking for safe storage
• Phase rotation indicator for 3-phase systems
• RCD functionality
• Two-button control allows you to draw more power from the circuit being tested and intentionally remotely trip ground fault circuit interrupters (RCD / JFB)
• Display Hold (T130 and T150)
Built-in electric flashlight (T110, T130 and T150)
• Single-phase voltage provides fast identification of live conductors
• Sliding probe tips, probe tip guards and storage accessories
• Probe tip protection and storage accessories
• The tip guard acts as an extra hand when opening electrical safety sockets according to UK standards
• Resistance measurement up to 1,999 ohms (T150)
WearGuard visar insulation indicates if the test cables are damaged"

Voltage tester T-series

Voltage tester T-series

Voltage tester T-series

Electrical tester T6-1000/EU

Electrical tester T6-1000/EU

Art. no.: 4201933

With FieldSense technology
AC voltage 1000V
AC current 200A
Resistance 100k ohm

Electrical tester T6-1000/EU

Electrical Tester T5-1000

Electrical Tester T5-1000

Art. no.: 4201324

Tester for 1000 V voltage, continuity and current which includes the following: detachable 4 mm probes and Instruction Sheet.

Luxmeter Marelco LED 42.1802

Luxmeter Marelco LED 42.1802

Art. no.: 4207239

Digital luxmeter with photosensor adapted for different types of light. A stable, light-sensitive silicone diode with filter that provides a high level of accuracy and has a long service life. Measures the sensitivity characteristic in accordance with CIE photo curve (human eye response curve). Four measurement ranges: 0.01 - 200, 2000 2000 and 200,000 LUX. The instrument is equipped with data hold, plus max. min. and average.
Delivered with case, battery,photo detector and Swedish user instructions.

Mini clamp meter 400A AC/DC True RMS

Mini clamp meter 400A AC/DC True RMS

Art. no.: 4204570

A very small and versatile current clamp meter in robust design. PEAK function provides the measurement’s absolute peak value of power and voltage. Smart holder for measuring probes facilitates measurement of voltage, resistance and capacitance. The format of the efficient, only 168 mm wide and high security class CAT III 300V makes this current clamp as well suited to installers and service technicians as it is to HVAC installers and caretakers.EN 61010-1.
Other functions: Data hold, Peak, Diff-measurement, automatic shutdown 12 min.
Supplied with: Bag, batteries, test charger and user instructions in Swedish.

Mini clamp meter 400A AC/DC True RMS

Mini clamp meter 42.7601 300A AC

Mini clamp meter 42.7601 300A AC

Art. no.: 4204568

A very compact and easy-to-use clamp meter that fits in your trouser pocket. Only 150 mm long. The compact format makes it easy to reach in confined spaces. With automatic location selection, the right scale is selected automatically between 0-40.00 A and 0-300.0 A. The Data Hold function freezes the measurement value in the display so that the value can be read off at another spot if it is difficult to read during measurement. Overvoltage category CAT III 300V Approved in accordance with EN 61010-1.
Batteries, bag and user instructions in Swedish

Clamp meter 365

Clamp meter 365

Art. no.: 4204475

Compact clamp meter with detachable jaws
Fluke 365 is an innovative clamp meter for AC/DC current and true RMS. The clamp meter has detachable jaws, making it easier to take a reading and read it off the display, even in tight and hard-to-access locations. A built-in LED lights up the object of measurement if needed. Fluke 365 also offers resistance measurement, continuity testing, a hold function, backlit display, and automatic reset when measuring DC current. It is designed for environments with electrical disturbance, with advanced signal processing that produces stable measurement values.
Comes with test leads, magnetic mount (TPAK), soft case, and user instructions

Multimeter digital 110-series

Multimeter digital 110-series

Art. no.: 4203215

Digital multimeters with true effective value
Fluke 110-series of digital multimeters. The new Fluke 110 series is a new model series with top modern multimeters. The series consists of four digital multimeters with true-RMS, each designed for specific users to suit their needs. The instrument can be easily used with one hand and has a backlit display with large easy to read digits.
Fluke 114 – electrical multimeter. Model 114 is ideal for electrical troubleshooting and simple functional testing in homes and commercial premises. It has all the basic functions and a special feature that prevents false readings caused by leaked voltage.
Fluke 115– multimeter for service in the field. Model 115 is a multimeter for everyday use that is optimised for electric and electronic testing outdoors, in industry and in other applications where more than one basic function makes the job easier.
Fluke 116 multimeter– with thermometer and micro ampere. Model 116 is intended for engineers who work with heating, ventilation, and air conditioning. It includes temperature gauge and microampere function for quick troubleshooting of problems related to heating and ventilation.
Fluke 117 - multimeter with non-contact voltage detector. Model 117 is recommended for electricians who work in commercial and non-commercial premises (hospitals, schools). It is equipped with features such as non-contact voltage detector that does the job faster and more securely. Fluke 117 can also be ordered together with a Fluke 322 current clamp, a soft case and a mounting magnet.
All inputs in accordance with EN 61010-1 CAT III 600V.
Technical data:
Security standard:
All contacts are classified according to EN61010-1 CAT lll 600V. UL, CSA, TUV and VDE.

Multimeter 83V/87V

Multimeter 83V/87V

Art. no.: 4203225

General specifications:

Maximum voltage between terminal and ground: 1000 V rms
Fuse protection for mA or µA inputs: 44/100 A, 1000 V FAST Fuse
Fuse protection for A input: 11 A, 1000 V FAST Fuse
Show:
Digital: 6000 counts updates 4 / sec; (Model 87V also has 19,999 bills in high resolution mode)
Analog: 33 segments, updates 40 / sec.
Frequency: 19,999 counts, updates 3 / sec at >10 Hz
Temperature: Operation: -20 ° C to +55 ° C; Storage: -40 ° C to +60 ° C
Altitude:
Operation: 2000 m
Storage: 10,000 m
Temperature coefficient: 0.05 x (specified accuracy) / ° C ( 28 ° C)
Electromagnetic compatibility: In an RF field with 3 V / m total accuracy = specified accuracy
Relative humidity: 0% to 90% (0 ° C to 35 ° C); 0% to 70% (35 ° C to 55 ° C)
Battery type: 9 V zinc, NEDA 1604 or 6F22 or 006P
Battery life: 400 hours typically with alkaline (with backlight off)
Vibration: Per MIL-PRF-28800 for a Class 2 instrument
Shock: 1 meter drop per IEC 61010-1: 2001
Size (HxWxL): 1.25 x x 3.41 in x 7.35 inches (3.1 cm x 8.6 cm x 18.6 cm)
Size with holster and flex stand: 2.06 in x 3.86 in x 7.93 inches (5.2 cm x 9.8 cm x 20.1 cm)
Weight: 355 g (12.5 oz)
Weight with holster and flex stand: 624 g (22.0 oz)
Safety: Meets ANSI / ISA S82.01-2004, CSA 22.2 no 1010.1: 2004 to 1000 V surge voltage category

Multimeter 83V/87V

Accessories TLK225-1

Accessories TLK225-1

Art. no.: 4290287

Main accessories Suregrip.

Multimeter Ironside Imt

Multimeter Ironside Imt

Art. no.: 384923

Very good all-round multi-metre with a large LCD display and many good functions apart from the normal current and voltage measuring functions up to 600V.. Delivered with 1 x 9V battery included.

Functions: Data Hold function (reads measurement value). Buzzer. Resistance (resistance of up to 2 MOhm). ROHS/VDE/CE /CAT III, 600V.

Wall socket tester with ground fault breaker test, 8410 Schuko

Wall socket tester with ground fault breaker test, 8410 Schuko

Art. no.: 4200397

A wall socket tester that quickly tests earthed and unearthed sockets.

– Three diodes that quickly indicate correct/incorrect installation.
– Possibility to quickly detect dangerous currents on the protective earth
– Simple test of the earth fault breaker, 30mA
– Felxible cable with Schuko cable that makes it easier to check the wall socket.

Elma 8410 meets IEC 61010-1 KAT III 300V and is supplied with the manual.

Wall socket tester with ground fault breaker test, 8410 Schuko

Pen multimeter Kyoritsu 1030

Pen multimeter Kyoritsu 1030

Art. no.: 4203175

The Kyoritsu 1030 is a pen multimeter, designed for one-handed use. The instrument measures AC/DC voltage, resistance, frequency, and capacitance, and has automatic area selection, data hold, continuity testing, diode testing, and torch.
The instrument has an attractive design and a smart roll-up of the test lead, which is inside a cover when the instrument is not in use. With the illuminated display, the pen multimeter is made for demanding and choosy electricians who require the best possible function and electrical safety
The Kyoritsu 1030 meets IEC 61010-1 Cat. III 600V and is supplied complete in a practical bag, including batteries and fixed test lead.

Pen multimeter Kyoritsu 1030

Measuring tip, Fluke TP175

Measuring tip, Fluke TP175

Art. no.: 4290004

Measuring tips that are suitable for most test leads with 4 mm banana contacts. TP175 offers a unique solution with its rotating measuring tip. Rotate and the measuring tip adapts itself to your application and you can switch between different categories in accordance with EN61010. The measuring tips are 2 mm i diameter.
Tested and approved according to EN61010 CAT III 1000V/CAT IV 600V, 10A.

Motor/Inductance tester TR1000

Motor/Inductance tester TR1000

Art. no.: 4210416E

– Motor tester that tests everything for motors, generators, frequency converters
– Measures inductance in the windings and diversion/insulation faults directly on the motor or via the installation.
- Inductance measuring is the only safe method of measurement that provides far greater security than conventional resistance measurement.
– An unavoidable instrument combination for professional service/troubleshooting and preventive maintenance.
– Delivered complete in bag incl. batteries, test leads, clamp and manual.

Motor/Inductance tester TR1000

Test cable set SureGrip™

Test cable set SureGrip™

Art. no.: 4290284

Practical test cable all in one-package with one year warranty.

Test cable set SureGrip™

Clamp meter 323 for true RMS

Clamp meter 323 for true RMS

Art. no.: 4200008

Measurement functions
400 A AC current measurement
Measurement of 600 V AC and DC voltage
True RMS, AC voltage and current for accurate measurement of non-linear signals
Resistance measurement up to 4 kΩ with connection test

features
Smooth, ergonomic design
Safety requirements according to CAT IV 300V / CAT III 600 V
Pause button (Hold)
Two year warranty
Soft carrying case

Multimeter digital 113

Multimeter digital 113

Art. no.: 4203213

A Fluke 113 is used for the basic electrical tests and repairs of the most electrical problems. Among the features are Fluke VCHEK ™, a number of measurement functions, background lighting and a LoZ function for measurement of low impedance for a simultaneous measurement of voltage or continuity. Follows the latest safety standards.
Delivered with test leads with a 4 mm test pins and the protective cap, case, installed battery and user manual.

Test cables TL175/E, Fluke

Test cables TL175/E, Fluke

Art. no.: 4290052

Patented pull-out tip mantle that meets new electrical safety requirements to reduce tip exposure while providing sufficient versatility for most measurements. Universal input jacks compatible with any instrument capable of receiving 4 mm shielded standard banana connectors. One year warranty.

CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2

Multimeter med PC-kommunikation BM 251s

Multimeter med PC-kommunikation BM 251s

Art. no.: 4203515

Elma BM 251s is a new hand-held multimeter with many features and built-in PC communication. The instrument measures current, voltage, resistance and throughput. The instrument has built-in contactless detection of electric fields which can be used, among other things, to detect electromagnetic fields from computer screens or as contactless pole finder.

Multimeter med PC-kommunikation BM 251s

Multimeter Digital CATIII 600V

Schneider Electric

Multimeter Digital CATIII 600V

Art. no.: 4202502

Digital multimeter CATIII 600V with advanced precision measurement of voltage, current, resistance, and continuity. In advanced design for high precision measurement.

Multimeter Digital CATIII 600V

Clamp meter Digital CATIII

Schneider Electric

Clamp meter Digital CATIII

Art. no.: 4201777

Digital clamp ammeter with LCD display. Measures DC voltage (0.2/2/20/200/600V), AC voltage (2/20/200/600 VAC), DC and AC current (2/20/200/600A), resistance (200O/2kO/20kO/200kO/2MO/20MO) and continuity (below 30O). Capacitance and data hold are other functions. Approved according to IEC-61010 CAT III 600V. Weight 160g (with battery). Battery 3V(CR2032).

Voltage tester TPT420

Voltage tester TPT420

Art. no.: 4202514

Two-pole tester Kat IV 1000V that also warns of battery voltage, IP64 rated IEC/EN 61243-3 and VDE0682-401.

Voltage tester ELMA 1000A

Voltage tester ELMA 1000A

Art. no.: 4201110

ELMA 1000A is a small safety tension tester in smooth design. The instrument has clear LED indication for different voltages and automatic polarity indication. The tester has a smart attachment of the test probe to fit a 19 mm wall outlet so that it can be operated with one hand. ELMA 1000A complies with the requirements according to e.g. IEC 61010-1 CAT III and EN 61243- 3 and IP-class 64. Open bag with belt holder is available as an accessory for your voltage tester.

Voltage tester ELMA 1000A

Test cable set All-in-One TL76

Test cable set All-in-One TL76

Art. no.: 4202957

Test leads from Fluke made of silicone cable.

Wireless humidity and temperature sensor, testo 605i

Wireless humidity and temperature sensor, testo 605i

Art. no.: 9854251

The compact moisture and temperature sensor testo 605i is part of the 2nd generation of Testo's SmartProbes series (with up to 100 m Bluetooth range) and is used in combination with a smartphone or tablet. It is suitable for measuring air temperature and relative humidity in rooms and ducts Together with the hot wire sensor testo 405i, it is also possible to determine heating and cooling performance.

The user can conveniently read their measured values in the free app that is downloaded to a smartphone or tablet. The app also enables automatic determination of dew point and wet temperature. All measurement data is displayed either as a diagram or in tabular form. The measurement results can also be sent directly as PDF or Excel files.

System requirements
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0 or later

Included: Humidity / temperature sensor testo 605i with batteries and factory protocol.

Test probe 2 mm, TP38

Test probe 2 mm, TP38

Art. no.: 4202935

Narrow body for hard-to-reach spaces or recessed outlets. Hard stainless steel tip (red, black), insulated test top. CAT IV 600V, CAT III 1000V, 10 A. One year warranty.

Current clamp meter mini, 200A

Current clamp meter mini, 200A

Art. no.: 4204348

Mini pliers ammeter in pocket format, 200A AC.
- Very small tong ammeter in practical mini format. Easy to access thanks to "teardrop-shaped tong opening"
- The instrument measures current 200 A AC
- The instrument is equipped with data hold, complies with IEC 61010-1 CAT III 300V and is delivered complete in a bag incl. batteries and manual.
Battery: 2x1.5V LR44 (inclusive)
Current: 0-20-200A AC.
Resolution: 0.01-0.1 A

Current clamp meter mini, 200A

Power sensor PowerTag Resi9 flexi

Schneider Electric

Power sensor PowerTag Resi9 flexi

Art. no.: 4262843

The energy sensor is mounted on miniature circuit breakers, the flex version is universal and fits all types of miniature circuit breakers and circuit breakers. Together with the Wiser Gateway CCT501901, the communication takes place wirelessly with Zigbee. For measurement in real time, as well as historical data on a daily, weekly, monthly and yearly basis, this is shown in the Wiser by SE app. The user can easily create an automation such as acts as a power monitor, if the total consumption exceeds x kWh and then notify the user via the app.

Power sensor PowerTag Resi9 flexi

Power sensor PowerTag Resi9 flexi

Insulation tester 1503/1507

Insulation tester 1503/1507

Art. no.: 4206037

Fluke insulation resistance is a compact, durable, reliable and easy to use insulation tester. With multiple test voltages it is ideal for troubleshooting, commissioning and preventive maintenance. Thanks to the extra features, for example. the remote probe that is included, you can save time and money when testing.
Functions:
Comes with test probe with test button - TP165X, TL224 TP74 test leads, probes, alligator clips and user instructions

Isolation tester and TRMS Cat IV multimeter, BM 878

Isolation tester and TRMS Cat IV multimeter, BM 878

Art. no.: 4201173

BM 878 is a true TRMS CAT IV multimeter with integrated isolation tester. The isolation tester has five optional test voltages. The instrument also has a built-in 200mA ohmmeter for measuring continuity. The BM 878 is equipped with a large, illuminated double display and a fast, analogue bar graph. The instrument measures TRMS voltage, current, frequency, resistance, capacitance, diodes continuity and temperature. Elma BM 878 has a number of extra functions that include: max / min, data hold, auto shutdown, automatic / manual range selection and VFD function, which allows the instrument to measure real values after a frequency converter. The multimeter meets EN61010-1 CAT IV 600V and is supplied incl. remote control, test leads, batteries, type K temperature probe and manual.

Isolation tester and TRMS Cat IV multimeter, BM 878

Voltage tester Testboy 40N

Voltage tester Testboy 40N

Art. no.: 4201148

Testboy 40N is a voltage tester of electronic type for the AC and DC voltage. Indication of the phase can be made by a measurement against the ground. Testboy 40N does not trigger earth fault breaker. Testboy 40N is a very robust voltage tester. Supplied with the user manual. 5-year warranty.

Clamp meter Ironside

Clamp meter Ironside

Art. no.: 78808493

The clamp meter measures 9 parameters: Voltage, Current, Active Power, Power Factor, Apparent Power, Reactive Power, Active Energy, Frequency, Temperature.
The 45 mm jaw makes measurement and handling quick and easy.

Specifications:
Operating temperature: –20 to 1370°C
Range Select: AUTO
Active Power: 99.99 kW / 100 kW ~ 300 kW
Apparent Power: 99.99 kVA / 100 kVA ~ 245 kVA
Reactive Power: 0.01 VAr ~ 99.99 kVAr / 99.99 kVAr ~ 120 kVAr
Power Factor: 0.3 ~ 1.0
Active Energy: 0 ~ 99.99 kWh / 100 ~ 700.0 kWh
MAX/MIN
Backlight

Wall socket tester with ground fault breaker test

Wall socket tester with ground fault breaker test

Art. no.: 4200218

This small, versatile multimeter is an excellent instrument for measuring voltage and resistance, etc.

Universal tester T5-1000 with holster and Fluke 1 AC

Universal tester T5-1000 with holster and Fluke 1 AC

Art. no.: 4201323

Universal Tester for continuity, resistance, AC current and AC/DC voltage. Unique open power clamp that measures up to 100A with 0.1A resolution. Robust, compact design with practical storage of test leads. Can withstand a drop of 3 m. All Fluke inputs T5-1000 in accordance withIEC 1010-1 CAT III 1000V. Automatic turn-off to save battery power. This pack also includes a Fluke 1AC voltage detector and H5 holster.
Included accessories: 4 mm detachable probes and an instruction sheet

Multimeter Kewmate 2012R

Multimeter Kewmate 2012R

Art. no.: 4203036

True RKS with open power clamp
Kewmate 2012R is one of the top models with the series of handy multimeters with open power clamp. The instrument now has new features and is equipped with TRMS-detector, automatic DC zero adjustment as well as a new and larger clamp which can measure up to 120A AC / DC.
Kewmate 2012R has a large easy-to-read display with analogue Bar graph, and it measures voltage, current, resistance, throughput, frequency, and is equipped with auto range selection, data hatch and auto-rejection. The instrument can be stored in the pocket and it is delivered with a powerful protection cover in which the test leads and the power clamp are well-protected. The instrument complies with IEC 61010-1 KAT III 300V and is delivered complete with test leads, batteries, protective cover and manual.

Multimeter Kewmate 2012R

Multimeter Elma BM789 TRMS

Multimeter Elma BM789 TRMS

Art. no.: 4202558

Elma BM789 multimeter, TRMS in slim design.

Elma BM789 is a slim multimeter with high bandwidth and True RMS measurements. Auto Check is an intelligent function, which automatically detects and selects AC voltage,
DC voltage and throughput test / resistance. All you have to do is turn on the instrument and measure. Low Z is voltage measurement with low impedance, ie the measuring point is loaded and
thus ensuring that the real voltage is measured and the ghost voltage is discharged.

The instrument has a built-in, non-contact detection of electric fields, which i.a. can be used to detect electromagnetic fields from computer screens or as a non-contact pole finder.
Elma BM789 measures i.a. True RMS current, voltage, resistance, frequency, capacitance, throughput, temperature and much more.

Elma BM789 has an illuminated display with analogue bar graph for easy and fast reading. The instrument is equipped with automatic / manual area selection, relative measurement, Peak hold, min / max, data hold and intelligent auto shut-off.

The instrument is very safe and robust, despite the sleek design and is equipped with highly efficient fuses. It complies with IEC 61010-1 CAT III 1000V & CAT IV 600V for maximum safety.
Elma BM789 is delivered complete incl. rubber protective cover, test leads, temperature sensor (wire sensor -50 to + 250 ° C), battery and Swedish manual.

Multimeter Elma BM789 TRMS

Multimeter Elma 6100EVSE

Multimeter Elma 6100EVSE

Art. no.: 4202796

Elma 6100EVSE is a robust True RMS AC / DC minimometer equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and circumference. In addition, the instrument is equipped with a special area for external current clamps and the ability to measure up to 3000A with flex pliers (ElmaFlex 430).

The unique EVSE function in the Elma 6100EVSE also converts the CP signal from the EVSE charger for electric cars directly to an ampere value. Used on .ex. with the Elma EVSE-200 (available as an accessory on this page), the CP DutyCycle signal from the charger can be read directly as an ampere, instead of a classic Hz% signal. So ask e.g. in Elma EVSE-200 CP knob of 32A, which simulates that the car "asks" for 32A, and read from the electric car charger's answer what it can give directly, such as. 16A.

With the Bluetooth function and the free app APP Elma Link, which is available for both iOS and Android, the Elma 6100BT becomes a secure and flexible documentation tool. See your display directly on your Android / iOS device and perform measurements at a safe distance from dangerous voltage. View and log all values, curves and graphs directly on the phone. Save and link photos and comments to the measurement and share e.g. via mail.

Elma 6100EVSE has a large, illuminated display and is equipped with a powerful LED lamp, data hold max / min and auto shut-off. The instrument complies with EN61010-1 CAT III 600 V and comes with test leads, batteries and manual.

Multimeter Elma 6100EVSE

Mini-Multimeter Ironside

Mini-Multimeter Ironside

Art. no.: 78808491

Insulation tester/Multimeter DT5500A

Insulation tester/Multimeter DT5500A

Art. no.: 4210445

Elma DT5500A is a new insulation tester with really good resolution; it is also a multimeter. The instrument is very robust and equipped with a large and easy-to-read display with a built-in analog bar graph. The multimeter measures AC/DC voltage, resistance, and through time. The insulation tester has adjustable test voltage: 125, 250, 500 and 1000V lockable test function
Elma DT5500A has automatic discharging of capacitive voltage and automatically warns of dangerous voltage if one tries to do a resistance test on an installation that is energised. The instrument has automatic range selection, data hold and min-/max measurement. Elma DT5500 is equipped with an integrated rubber protection cover, complies with IEC CAT III 1000V / CAT IV 600V and comes complete in bag incl. test wiring, batteries and manual.

Insulation tester/Multimeter DT5500A

Insulation tester Kyoritsu 3132A

Insulation tester Kyoritsu 3132A

Art. no.: 4206145

A small, safe, easy-to-use insulation tester
– Test voltages, choice of 250, 500 and 1000 V
– Lockable test button – leaves both hands free
– Mirrored scale – for safe reading
– Built-in ohmmeter for measurement on equalisation connections (potential equalisation)
– Built-in voltmeter 0-600V
– Extra safe and robust – dust- and splash-proof. IP 54, fulfills IEC 61010-1 CAT III 600V
- Supplied complete with batteries, test leads, and manual

Insulation tester Kyoritsu 3132A

Insulation tester

Insulation tester

Art. no.: 4206453

Elma 5800, combines the insulation tester with a true TRMS multimeter. With a safety category of KAT IV 600 V, it can be used on many different applications. The multimeter is equipped with wireless PC communication and can be used as a "recorder" in cases where you have to log on for an extended period of time. When connecting to a PC, you can use the instrument as a data logger and thus get tables and graphs for documentation.

Insulation tester

Cable Locator MCT105

Cable Locator MCT105

Art. no.: 4203575

Cable finder for cables and conductors in walls.

Voltage detector LVD2 With lamp

Voltage detector LVD2 With lamp

Art. no.: 4201249

Fluke LVD2 combining light with the built-in LED and voltage detection in pen format. The double sensitivity means that the blue LVD2 indicates when you are in close proximity to a voltage source with a red light when you are beside it. Fluke LVD2 senses currents between
90 - 600V AC

• Sensitivity between 90V and 600V AC
• Blue light close to power source
• Red light nest to power source

Installation Tester iTest 7400

Installation Tester iTest 7400

Art. no.: 4203809

Elma iTest 7400 – Simple and accurate installation test. When you need an installation tester that is as reliable as it is easy to use, then the Elma iTest 7400 is the perfect choice. With high precision and ease of use, it is developed to help you quickly and safely verify your installations according to SS/IEC 60364-6 This means that you can trust that each installation is thoroughly tested for both function and safety 7400 as user-friendly as possible, the test function is structured intuitively: you select the function with a knob, and the arrow keys allow you to easily adjust the settings.

With Elma iTest 7400 you get:
•200mA Continuity Test: Ensures protective conductor continuity and/or equipotential bonding, and offers easy through-test/summation with low test current.
•Insulation test: Predefined test voltages from 50 V to 1000 V and adjustable limit value for precise measurements.
• Mains impedance measurement (Ikmin) and voltage drop: Built-in fuse curves with limit values that quickly show whether the installation is safe. For measuring Ikmax, the fuse type can be easily deactivated.
•Fault circuit impedance and transition resistance to ground: User-friendly verification that takes into account the type of RCD, so that the JFB does not trip unnecessarily.
•JFB test of all common types of RCD: Also tests EVSE 6 mA DC, with separate test for disconnection time, ramp test and auto test.
•Measurement of voltage, frequency and phase sequence: For a complete analysis of the electrical function of the installation.

The Elma iTest 7400 is a user-friendly instrument that meets all requirements for installation testing. Supplied complete in a practical bag with test leads, test sticks, alligator clips, Schuko test cables and a Swedish manual - everything to get you started straight away.

Installation Tester iTest 7400

Digital Lux meter, Elma 1335

Digital Lux meter, Elma 1335

Art. no.: 4207254

A new versatile lux meter for accurate measurement of many different types of light. The instrument has a very large measuring range of 0 to 400.000 lux, which makes it useful for emergency lighting and outdoor measurement during strong sunshine. The Lux meter has a large display with bar graph and peak, min, max hold, and relative measurement, zero adjustment and data hold function. The instrument comes with a bag, external sensor and a manual.

Digital Lux meter, Elma 1335

Timer 7KT

Art. no.: 4222206

Timer 48X48mm DC 10-80V

Set Eurotest XC MI3152 (14 m)

Set Eurotest XC MI3152 (14 m)

Art. no.: 4201732

The set contains the following:

XC 4201442
Bag 4290163
Belt roller 4200445
Elma Easy-ISO 4210758

Do you want to make a transfer, structure or send a PDF file of the measured values directly to e.g. your customer via mobile phone (Android) or Tablet and you need Accessories 4201811. NOTE. 4201811 is not included in this set but is purchased separately.

Set Eurotest XC MI3152 (14 m)

Digital True RMS AC/DC mini clamp ampere meter 3039

Digital True RMS AC/DC mini clamp ampere meter 3039

Art. no.: 4200667

Elma 3039 is a true RMS clamp meter in a very handy design for easy measuring of AC & DC currents. The instrument has a resolution down to 10mA, a large back-lit display, smart data hold and automatic zero-adjustment. Elma 3039 has low pass filter and "Inrush" for measuring starting currents. With the "Volt sense" function voltage can be detected without any contact. The instrument complies with IEC 61010-1 KAT III 600V and supplied with batteries and manual.

Digital True RMS AC/DC mini clamp ampere meter 3039

Showing 52 of 139