Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricTools and Measuring instruments 4242 Measuring instruments

42 Measuring instruments

Inspection instruments
CEE socket tester
Data/Telecoms/Optical
Phase sequence display
Moisture meter
Instrument pack
Insulation tester
Continuity tester
Lux meter
Magnetic field tester
Motor tester
Multimeters
Special instrument
Voltage tester
Current clamps
Temperature instrument
Test leads
Accessories, Fluke
Wall socket tester
Thermal cameras
Panel instruments Voltmeters, ammeters, current transformers
Operating hours meter
Current transformers
Wiser Energy IP
Solar cell measurement
Cable finders and accessories

Do you work with electrical installation and need good tools and electrical measuring instruments? Ahlsell helps you find moisture meters, cable finders, and other proper electrical measuring devices in the industry. We have the range regardless of whether you work with commercial properties or private residences. If you want to locate breaks in cables, you need a voltage indicator or an installation tester to test, measure and document according to the installation rules. You will find intelligent electrical measuring instruments with us that measure various materials from most major suppliers. Explore our wide range of tools, electrical measuring instruments, and accessories in the online store, or visit your nearest Ahlsell store.

Installation Tester iTest 7400
Elma
Installation Tester iTest 7400
Art. no.: 4203809
Elma iTest 7400 – Simple and accurate installation test. When you need an installation tester that is as reliable as it is easy to use, then the Elma iTest 7400 is the perfect choice. With high precision and ease of use, it is developed to help you quickly and safely verify your installations according to SS/IEC 60364-6 This means that you can trust that each installation is thoroughly tested for both function and safety 7400 as user-friendly as possible, the test function is structured intuitively: you select the function with a knob, and the arrow keys allow you to easily adjust the settings.

With Elma iTest 7400 you get:
•200mA Continuity Test: Ensures protective conductor continuity and/or equipotential bonding, and offers easy through-test/summation with low test current.
•Insulation test: Predefined test voltages from 50 V to 1000 V and adjustable limit value for precise measurements.
• Mains impedance measurement (Ikmin) and voltage drop: Built-in fuse curves with limit values ​​that quickly show whether the installation is safe. For measuring Ikmax, the fuse type can be easily deactivated.
•Fault circuit impedance and transition resistance to ground: User-friendly verification that takes into account the type of RCD, so that the JFB does not trip unnecessarily.
•JFB test of all common types of RCD: Also tests EVSE 6 mA DC, with separate test for disconnection time, ramp test and auto test.
•Measurement of voltage, frequency and phase sequence: For a complete analysis of the electrical function of the installation.

The Elma iTest 7400 is a user-friendly instrument that meets all requirements for installation testing. Supplied complete in a practical bag with test leads, test sticks, alligator clips, Schuko test cables and a Swedish manual - everything to get you started straight away.
Multimeter digital 170-series
Fluke
Multimeter digital 170-series
Art. no.: 4203299
The Fluke 170 series sets a new standard for multimeters for general measurements. High construction quality and features together with Fluke's unique lifetime warranty make the Fluke 170 series very reliable working companions. Ergonomic design with integrated holster and large, clear digital display of 6000 points with integrated analog bar graph (backlit on 177 and 179 models). True-RMS AC voltage and current, temperature measurement (Fluke 179), data hold functions, alarm for the wrong connection of power cords, smart battery cover and much more make the Fluke 170 series the electrician’s best choice. Approved in accordance with EN61010-1 Cat IV 600V/Cat III 1000V, UL.
Size (LxWxH): 185 mm x 90 mm x 43 mm, Weight: 0.42 kg.
Included accessories: Test leads, battery, manual, 80BK temperature sensor (Fluke 179)
Digital multimeter DMM902/903/904
Elma
Digital multimeter DMM902/903/904
Art. no.: 4203065
Multimeters in very convenient format. Despite their small size, they have a very high security grade; CAT IV 600V, CAT III 1000V. They are protected against incorrect coupling by electronic fuse with automatic reset.
The instruments are fitted with non-contact voltage indicator, and voltage indication using measurement probe . Hold function and powerful LED lamp. The fixed measurement probes are kept securely on the back of the instrument.
Measurement features include voltage, current, resistance, diode and beeper, this applies for all models. Automatic power-off, saves the batteries.
The DMM 903 also has current measurement.
DMM 904 has not only current measurement but also capacity measurement.
All three multimeters are supplied with silicone wires and holster.
• Many features - small format
• Automatic selection of area
• Integrated flashlight
• Silicone cables
• Holster included
Multimeter 83V/87V
Fluke
Multimeter 83V/87V
Art. no.: 4203225
General specifications:

Maximum voltage between terminal and ground: 1000 V rms
Fuse protection for mA or µA inputs: 44/100 A, 1000 V FAST Fuse
Fuse protection for A input: 11 A, 1000 V FAST Fuse
Show:
Digital: 6000 counts updates 4 / sec; (Model 87V also has 19,999 bills in high resolution mode)
Analog: 33 segments, updates 40 / sec.
Frequency: 19,999 counts, updates 3 / sec at >10 Hz
Temperature: Operation: -20 ° C to +55 ° C; Storage: -40 ° C to +60 ° C
Altitude:
Operation: 2000 m
Storage: 10,000 m
Temperature coefficient: 0.05 x (specified accuracy) / ° C ( 28 ° C)
Electromagnetic compatibility: In an RF field with 3 V / m total accuracy = specified accuracy
Relative humidity: 0% to 90% (0 ° C to 35 ° C); 0% to 70% (35 ° C to 55 ° C)
Battery type: 9 V zinc, NEDA 1604 or 6F22 or 006P
Battery life: 400 hours typically with alkaline (with backlight off)
Vibration: Per MIL-PRF-28800 for a Class 2 instrument
Shock: 1 meter drop per IEC 61010-1: 2001
Size (HxWxL): 1.25 x x 3.41 in x 7.35 inches (3.1 cm x 8.6 cm x 18.6 cm)
Size with holster and flex stand: 2.06 in x 3.86 in x 7.93 inches (5.2 cm x 9.8 cm x 20.1 cm)
Weight: 355 g (12.5 oz)
Weight with holster and flex stand: 624 g (22.0 oz)
Safety: Meets ANSI / ISA S82.01-2004, CSA 22.2 no 1010.1: 2004 to 1000 V surge voltage category
Multimeter 83V/87V
Voltage tester T-series
Fluke
Voltage tester T-series
Art. no.: 4200081
Fluke T90: Basic model for voltage and continuity measurement for maintenance.
Fluke T110: Intermediate model for basic voltage and continuity measurement and phase sequence display that can handle dark conditions. CAT IV 600V rating for indoor and outdoor use.
Fluke T130: Intermediate model for basic voltage and continuity measurement as well as phase sequence display that can handle dark conditions with actual voltage measurement on backlit LCD display and data locking functionality.
Fluke T150: Advanced model for advanced troubleshooting of AC and DC systems in all environments and with resistance measurement.

Backlit graded scale and backlit indicators
• Vibrations to provide tactile feedback (T110, T130 and T150)
• Noise on / off when testing in quiet areas
• Battery alarm
• Detects voltage even with discharged batteries
• Improved probe docking for safe storage
• Phase rotation indicator for 3-phase systems
• RCD functionality
• Two-button control allows you to draw more power from the circuit being tested and intentionally remotely trip ground fault circuit interrupters (RCD / JFB)
• Display Hold (T130 and T150)
Built-in electric flashlight (T110, T130 and T150)
• Single-phase voltage provides fast identification of live conductors
• Sliding probe tips, probe tip guards and storage accessories
• Probe tip protection and storage accessories
• The tip guard acts as an extra hand when opening electrical safety sockets according to UK standards
• Resistance measurement up to 1,999 ohms (T150)
WearGuard visar insulation indicates if the test cables are damaged"
Voltage tester T-seriesVoltage tester T-seriesVoltage tester T-series
Phase sequence display 9040
Fluke
Phase sequence display 9040
Art. no.: 4201545
Fluke 9040 is a phase sequence display that clearly indicates the 3 phases on a LCD display along with the phase sequence. Fluke 9040 is effective for the measurement of phase sequence anywhere where three phase current is used to drive motors, controllers and electrical systems. The voltage and the frequency range are designed for commercial and industrial applications. The measurement probes and alligator clips supplied with the instrument are designed to provide secure contact, especially on industrial contacts. No batteries are needed as the instrument is powered by mains voltage.
Comes with 3 probes, 3 pcs styli, fixed connected measuring cables and operating instructions. 2-year warranty.
Designed to meet the EN 61010 600V.CAT III requirements
Three phase display Via LCD display
Frequency band 15-400 Hz
Voltage range 40-700 Volts
Dimensions 124x61x27 mm
Weight 200 g
Multimeter Kewmate 2012R
Elma
Multimeter Kewmate 2012R
Art. no.: 4203036
True RKS with open power clamp
Kewmate 2012R is one of the top models with the series of handy multimeters with open power clamp. The instrument now has new features and is equipped with TRMS-detector, automatic DC zero adjustment as well as a new and larger clamp which can measure up to 120A AC / DC.
Kewmate 2012R has a large easy-to-read display with analogue Bar graph, and it measures voltage, current, resistance, throughput, frequency, and is equipped with auto range selection, data hatch and auto-rejection. The instrument can be stored in the pocket and it is delivered with a powerful protection cover in which the test leads and the power clamp are well-protected. The instrument complies with IEC 61010-1 KAT III 300V and is delivered complete with test leads, batteries, protective cover and manual.
ProcessMeter 789
Fluke
ProcessMeter 789
Art. no.: 4202928
Features of Fluke 789:

24 V voltage source
Very large double display
Improved backlighting with 2 brightness settings
1200 ohm drive capacity on mA source
HART setting with circuits and a built-in 250 ohm resistor
Buttons for 0% and 100% for switching mode in the range 4-20 mA generated current for fast span check
Fuses that are easily accessible from the outside for easy replacement
IR port for data processing in FlukeView Forms software (V2.1)
The Fluke 789 has features that are also available in the Fluke 787:

Precision 1000 V, 440 mA digital multimeter for true RMS
0.1% DC accuracy
0.05% DC accuracy
Frequency measurement to 20 kHz
Min / Max / Medium / Preserve / Relative modes
Diode test and continuity signal
Simultaneous display of mA and% of scale reading
20 mA DC power source / loop calibrator / simulator
Manual stepping (100%, 25%, coarse, fine) plus automatic stepping and automatic ramp
Externally available battery for easy battery replacement
Safety Standard

Meets safety class 1000 V EN61010-1 CAT III and safety class 600 V EN61010-1 CAT IV.
Voltage tester Elma 2200X
Elma
Voltage tester Elma 2200X
Art. no.: 4202602
Elma 2200X - CAT IV. Voltage / throughput / phase sequence tester.

With the Elma 2200X, Elma reinvents the voltage tester once again. The Elma 2200X has all the features you recognize from the Elma 2100X, but comes with test leads in extra strong quality. In addition, the instrument housing is in a stronger and more robust design. You can load the measuring point. It provides both the possibility of discharging the induced ghost voltage at the measuring point and for a simple JFB test, when the load is 30mA at 230V.

Never before have there been so many smart and well-thought-out functions in a simple voltage tester, which makes it perfect for most electrician assignments, L-AUS work and the establishment of a voltage-free system, where it is required to use an instrument that complies with the voltage test directive.

Voltage test, 2-pole with LEDs 12… 1,000V AC / DC
Voltage measurement with digital display 6… 1,000V / 1,500V AC / DC
Review test
Resistance measurement 0-1999Ω
Pole finder, single-pole voltage test that indicates the phase
Phase sequence / rotation field test, 2-pole for 3-phase network
Large clear illuminated display and highly efficient LEDs
Self-test and auto on / off function
Warning with diode in case of dangerous voltage without battery - for L-AUS work.
Complies with the voltage test directive for control of de-energized system
Very strong permanently mounted cables
Interchangeable test tips 2 / 4mm
Built-in powerful flashlight

Delivered including belt bag, Elma 2200X complies with IEC 61010-1 CAT IV 600V / IEC 61243-3: 2014 and is delivered complete with batteries and guidance.
Multi tester/voltage tester Elma X One
Elma
Multi tester/voltage tester Elma X One
Art. no.: 4202160
Elma X One – True RMS electric multi-tester / voltage tester. With Elma X One, Elma reinventes the voltage tester. Never has there been so many smart and well-thought-out features in an instrument. power pliers in a very slim design, perfect for working under voltage.

Voltage test, 2-pole with LEDs 12… 1,000V AC / DC
True RMS voltage measurement with digital display 7… 1,000V AC / DC
True RMS power measurement with super-slim power clamp 0-200A
Resistance measurement 0-50kΩ and throughput test
Wrist finder, single-pole voltage test indicating phase
Phase sequence / rotation direction test, 2-pole on 3-phase network
Large clear, illuminated display and high-efficiency LEDs
Self-test and auto on / off function
Genuine voltage test even without battery - for AMS work
Meets the voltage test directive for control of voltage-free state
Very powerful interchangeable wires with 4mm standard banana connectors
Interchangeable test tips 2 / 4mm
Built-in powerful flashlight
Comes with a cool belt bag

Elma X One complies with IEC 61010-1 KAT IV 600V / IEC 61243-3: 2014 and comes complete with batteries, test cables, manual and flexible belt bag.
Voltage tester Elma 2700X
Elma
Voltage tester Elma 2700X
Art. no.: 4202603
Elma 2700X - CAT IV. Voltage / throughput / phase sequence tester.

With the Elma 2700X, Elma reinvents the voltage tester once again. Elma 2700X has all the functions that you recognize Elma X-one, but has permanently mounted test leads in extra strong quality, in contrast to the X-one's removable and extremely thin and flexible cables. In addition, the instrument housing is in a stronger and more robust design. You can also "feel" the voltage, as the Elma 2700X vibrates when measuring voltage.

Never before have there been so many smart and thoughtful features in an instrument. Elma 2700X is a smart universal tester, which combines the voltage tester with an open current clamp, which makes the instrument perfect for most electrician assignments, L-AUS work and the finding of a voltage-free system, where it is required to use an instrument that complies with the voltage test directive.

Voltage test, 2-pole with LEDs 120… 1,000V AC / DC
Voltage measurement with digital display 1… 1,000V / 1,500V AC / DC
Current measurement with slim current clamp 0-200A
Review test
Resistance measurement 0-100kΩ
Pole finder, single-pole voltage test that indicates the phase
Phase sequence / rotation direction test, 2-pole for 3-phase network
Large clear illuminated display and highly efficient LEDs
Self-test and auto on / off function
Warning with diode in case of dangerous voltage without battery - for L-AUS work.
Complies with the voltage test directive for control of de-energized system
Very powerful permanently mounted test leads
Interchangeable test tips 2 / 4mm
Built-in powerful flashlight
Delivered including belt bag
Elma 2700X complies with IEC 61010-1 CAT IV 600V / IEC 61243-3: 2014 and is delivered complete with batteries, test leads, manual and belt bag.
Multimeter Elma 6100EVSE
Elma
Multimeter Elma 6100EVSE
Art. no.: 4202796
Elma 6100EVSE is a robust True RMS AC / DC minimometer equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and circumference. In addition, the instrument is equipped with a special area for external current clamps and the ability to measure up to 3000A with flex pliers (ElmaFlex 430).

The unique EVSE function in the Elma 6100EVSE also converts the CP signal from the EVSE charger for electric cars directly to an ampere value. Used on .ex. with the Elma EVSE-200 (available as an accessory on this page), the CP DutyCycle signal from the charger can be read directly as an ampere, instead of a classic Hz% signal. So ask e.g. in Elma EVSE-200 CP knob of 32A, which simulates that the car "asks" for 32A, and read from the electric car charger's answer what it can give directly, such as. 16A.

With the Bluetooth function and the free app APP Elma Link, which is available for both iOS and Android, the Elma 6100BT becomes a secure and flexible documentation tool. See your display directly on your Android / iOS device and perform measurements at a safe distance from dangerous voltage. View and log all values, curves and graphs directly on the phone. Save and link photos and comments to the measurement and share e.g. via mail.

Elma 6100EVSE has a large, illuminated display and is equipped with a powerful LED lamp, data hold max / min and auto shut-off. The instrument complies with EN61010-1 CAT III 600 V and comes with test leads, batteries and manual.
Cable and cable detector Testboy 26
Testboy
Cable and cable detector Testboy 26
Art. no.: 4209033
Testboy 26 is a new cable and wire finder with integrated functions for measuring and checking on telecommunication cables. The Cable Finder is useful on telecoms cables and on de-energized power lines. With the transmitter a signal is sent on the cable which then can be located with the help of the receiver. Testboy 26 replaces the previous model Testboy 25, E4209169 and E4209635 and has several improved features. The receiver is equipped with an integrated lamp (LED) for the illumination of the object, and with headphone jack which is useful in noisy environments. The transmitter also has functions for measurements on telephone lines, and continuity measurement and has a protection against accidental connecting to mains voltage up to 400V. The instrument fits in a new exclusive hard case. Approved in accordance with EN61010.
Comes with hard case, batteries and instruction manual. 5-year warranty
Metrel MI3155 Eurotest XDe
Metrel
Metrel MI3155 Eurotest XDe
Art. no.: 4202058
The Eurotext XC “AUTO-TEST" revolutionises elapsed time when you test in accordance with the installation guidelines. It’s never been faster to test, measure, and document.

Functions:
Voltage and frequency. Shorting current, loop impedance; neutral, earth, and phase.
Tests all types of RCD - type AC, A, B, B+, and F, as well as tripping time and tripping current with a smart ramp function.
Low-ohm 7 and 200mA test on the protective conductor.
Insulation test with 50 - 1000VDC test voltage. 2- and 3-pole transfer resistance to earth. Specific earth resistance with ro-adapter (optional).
Earth resistance measurement with 2 pliers (optional).
Phase sequence display.
TRMS leak current and current measurement (optional).
First Fault leak current measurement and indicative resistance measurement (IT-systems).
Memory with unique ability to build a map structure.
Maps/measurements can be named directly on the screen on customer premises.

Swedish Windows software for quick, easy documentation with the ability to edit and add comments. Swedish help function that shows connection diagrams directly on the screen.

New simple navigation and documentation - With its large, clear colour touchscreen, you quickly get an overview of both tests and saved results. Navigation is easy, either by touching the screen, or with the intuitive keypad. Eurotest is the only model on the market that allows building up and editing an entire installation structure, both via the software and directly in the instrument. In addition, customer name, address, project name, etc. can be input directly into the instrument. With Eurolink for Android (optional), you can build installation structures and transfer data from your tester via Bluetooth. You can also take pictures, video, and audio recordings and connect them to specific measurements. The complete measurement report, with all documentation, can be transmitted from your smartphone or tablet. The installation tester does not need to be brought back to the office to download data; everything can be done wirelessly in the field.

Technical data
3-pole earth resistance
Measuring Range:
0-20-200-10kΩ
Resolution:
0.01-0.1-1Ω
Metrel MI3155 Eurotest XDe
Showing 52 of 130