AhlsellProductsElectricLighting 70-8370 Interior light luminaires

70 Interior light luminaires

Ahlsell helps you find the right lighting and luminaires. Whether you work with installing interior or exterior lighting for public environments, industry, or private housing, we have the range for your needs and projects. Here you will find LEDs, downlights, emergency lighting, and accessories for easy installation. Smart lighting solutions from several major suppliers. Here you will find lighting fixtures in many different designs. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell store.

Ceiling and wall luminaire LED Athena II sensor
Westal
Ceiling and wall luminaire LED Athena II sensor
Art. no.: 7502813
Thin ceiling and wall ceiling made of polycarbonate with opal anti-glare protection, equipped with an LED unit. The luminaire is controlled with a built-in microwave sensor that can be set as needed using DIP switches on the driver. There, functions such as sensitivity, time for background light and whether the luminaire should light up when there is movement when it is light outside can be regulated IP44, IK10, Class II luminaire with quick connection terminal block and double knockouts for external cable and relay connection.

Master = The luminaire can be connected as a master, which means that it can control other luminaires. At maximum detection, the distance is approx. 6m. Can control Max 100W with master included. Several master luminaires can be installed in parallel, provided that the luminaires have the same group fuse and do not exceed 100W in total. Comes with quick connection terminal block and double knockouts for external cable and forwarding.

NÖD = With separate emergency light module with automatic self-test and status indication via green/red diode. In the event of a power failure, the luminaire lights up for 3 hours via battery. The battery can be easily replaced via quick contact during maintenance and is available as a spare part.
Ceiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensorCeiling and wall luminaire LED Athena II sensor
Ceiling luminaire LED Athena II
Westal
Ceiling luminaire LED Athena II
Art. no.: 7504099
Thin roof and wall plastic luminaire made of polycarbonate with opal glare protection, equipped with LED unit in on/off, pir sensor or master design.

On/off dimmable with front edge dimmer.

PIR sensor with up to 6m detection surface. The sensor has adjustable holding time and sensitivity. The luminaire can be connected as a master, which allows it to control other luminaires.

Master is controlled with a built-in microwave sensor that can be canceled as needed using dip switches on the drive. The luminaire can be connected as a master, which allows it to control other luminaires. At the maximum detection, the distance is about 6m.

NÖD = with a separate emergency light module with automatic self -test and status indication via green/red diode. In case of voltage loss, the luminaire shines for 3h via battery. The battle diet can easily be replaced via quick contact during maintenance and is available as a spare part.
Ceiling luminaire LED Athena IICeiling luminaire LED Athena IICeiling luminaire LED Athena II
LED panel aLight Office
a-collection
LED panel aLight Office
Art. no.: 7027999
Recessed LED luminaire for general lighting in offices and similar environments with suspended ceilings. The fixture is backlit, which gives very good energy efficiency, but a slightly higher height than side-lit plates. White lacquered aluminum frame. Supplied complete with drive, with or without DALI. The color temperature is easily changeable between 3000 Kelvin and 4000 Kelvin on both models using a switch on the back of the luminaire. The fixture is preset to 3000K from the factory. Drives without Dali can be set between 50% and 100% in seven steps. Factory setting 100%. Microprismatic disc to create pleasant light distribution and minimize glare. Non-dimmable version is connected with pre-assembled cable rack 2.2 m. Dimmable version with DALI is connected with 230V in the drive.
LED panel aLight Office
Interior luminaire Moln Pop
Exaktor
Interior luminaire Moln Pop
Art. no.: 7026998
Moln POP is a thin light panel and is suitable as general lighting for most environments. The fixture has a discreet frame in white lacquered aluminum that is mounted without tools in a suspended ceiling with a visible support profile, the minimum recess depth when mounting from below is 50mm. We can mount dense ceilings accessories 7013700 To change the appearance of the luminaire, you can combine the luminaire with a circular cover plate that is available as an accessory (7910385, 7910178). Moln POP OP has enclosure class IP20 above the suspended ceiling and enclosure class IP50 under the suspended ceiling. as IP20.

The fixture has adjustable color temperature in three modes; 3000-, 4000 and 5000k and available as on/off or DALI.

On/off can be set in five steps; 20- / 25- / 30-/ 35- & 40W and is delivered with a free-standing strain-relieved operating device. On/off is available with 3m cord stand with ungrounded European plug or with 3-pole connection box, EQ box. The EQ box has dual inputs and a quick connection terminal for cabling between 0.75 - 2.5mm². DALI is delivered with free-standing strain-relieved DALI driver and 5-pin connection box, EQ box. The EQ box has dual inputs and a quick connection terminal for cabling between 0.75 - 2.5mm². Moln POP is available individually or as a 6-pack in a box without inner boxes with the driver placed above the LED panels. For projects with many luminaires, a 6-pack is suitable as the time and handling of each luminaire is reduced and the amount of packaging is also reduced.

Supplied with adapted operating device and cord or connection box. Quick connection between operating device and light panel.

OP = opal diffuser
MP = microprismatic diffuser
Interior luminaire Moln PopInterior luminaire Moln PopInterior luminaire Moln PopInterior luminaire Moln PopInterior luminaire Moln Pop
Plafond LED AVR400, Ensto
Ensto
Plafond LED AVR400, Ensto
Art. no.: 7501157
The light fixture is a classic, stylish ceiling and wall fixture. The frame and the cover made with durable polycarbonate.
For recessed or surface-mounting.
Available with motion detector, PIR, and Radar.
PIR: The light illuminates automatically when new movement is sensed within the detection range, and extinguishes after the set time, as long as movement is no longer detected.
Detection Area: 360°/135°, approx. 6m in diameter.
Adjustable twilight relay: 1 lux - permanently
Time: 1-30 min.
External load: 460VA. Max 4 master together.
PIR models with codes ending in 5DL: It is possible to set the base light turn off 1h after the last detected movement, if so desired. Further, you may also set the level of the base light in the fixture (5%/20%) and set the level of the PIR-controlled light (100%/80%) NOTE! 6-charger with more masters on the same ignition wire.
RADAR: The light illuminates automatically when new movement is sensed within the detection range, and extinguishes after the set time, as long as movement is no longer detected. Radar can react through glass and thin walls, not recommended for outdoor use.
Ceiling and wall fitting LED RS 16 Sensor, Steinel
Steinel
Ceiling and wall fitting LED RS 16 Sensor, Steinel
Art. no.: 7503031
RS 16 LED is a wall and ceiling light fitting that can be used in environment where you want a simpler sensor fitting. It is equipped with Steinel’s unique HF sensor, which reacts quick as lightning to all movements regardless of direction of movement and ambient temperature. The sensor detects through soft materials and in small spaces can therefore detect movements outside of the room if the room is smaller than the sensor’s surveillance area (3-8 m diameter). Adjustable twilight relay and persistence time provide maximal energy savings. Up to 10 RS 16 LEDs can be connected by cable in a group, which means that all light fittings in the group act as master.
Assembly: Roof and walls. Indoors. Mounting height for ceilings is 2.20 - 2.70 m. If mounted higher, the range of the motion detector will be shorter. Three mounting holes c/c 170 mm. Spacers for surface wires.
Version: White polycarbonate body. Opaque glass diffuser with thread attachment. Equipped with an active HF sensor, surveillance area Ø 3-8 m that detects people walking. Surveillance angle 360°, opening angle 160°. The sensor detects through thin materials such as wood, plaster and glass. Persistence time adjustable between 8 sec and 35 min. Twilight relay adjustable between 2 and 2000 lux.
Connection: Two entrance holes Ø12 mm with throttling nipples. Terminal 2 x 1.5 mm² (phase, neutral, igniter).
Office luminaire aLight Office LED Beam, a-collection
a-collection
Office luminaire aLight Office LED Beam, a-collection
Art. no.: 7017786
Pendant luminaire with up and down lights for illumination of, for example, desks or other work surfaces in an office environment.

Frame and ends in sheet metal, lacquered in textured white. At the bottom is a disc in clear microprism fitted with an opal film. On the top is an opal disc that also acts as a dust contact guard. The luminaire is equipped with DALI actuators with hybrid dimmer technology. An impulse switch that controls both up and down lights simultaneously. Drawstring for ignition, extinguishing and dimming.

Easy to commute with included wire and reutlinger suspension, preferably in luminaire rail or ceiling profile to facilitate adjustment afterwards. The cc of the suspension on the luminaire is 1174 m. Mounted cable rack with 3 meters grounded plug.
Office luminaire aLight Office LED Beam, a-collection
Showing 52 of 218