Order lines: 0

Ahlsell Products Electric Installation equipment 11-1813 Motion, time, light control

13 Motion, time, light control

Timer switch with accessories

Light regulation

Presence detectors

Motion detectors

Kitchen attendants

Automatic stairs

Extronic Presence Management System

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Products (273)

Modular changeover switch, Hager

Modular changeover switch, Hager

Art. no.: 1335700

Timer or fixed light switch. Automatic selection of 3- or 4-wire connection. 1 end contact, 16A 230V AC1, max 100mA lamp current in pushbuttons.
The “on" duration time can be extended to 1 hour by a long button (EM003).

Modular changeover switch, Hager

LED dimmer 0-200VA without zero

LED dimmer 0-200VA without zero

Art. no.: 1360622

Universal pressure dimmer for LED, incandescent, halogen and electronic transformer. Functions for setting according to selected load. The dimmer fits in a box and can be used to control all LED luminaires and light sources. The LDn200 dims all the way down to 0W and has several knobs to set the minimum dimmer level, the highest dimmer level and a boost function for the slow-started LED light sources. The dimmer is robust and is equipped with self-restoring short-circuit protection and transient protection up to 2kV. The dimmer is less than 18mm thin and fits all types of switches and has double phase inputs for forwarding.

LED dimmer 0-200VA without zero

Connection timer Selecta Astronomic Top3

Connection timer Selecta Astronomic Top3

Art. no.: 1330470

The new digital top-3 series replaces the proven top-2 units, taking further steps forward in terms of function, energy efficiency and simplicity in programming. Programming can now be done via an App and then easily transferred to the timer via Bluetooth Low Energy. The astronomical timers in the SELEKTA series allow connected consumers to be controlled in accordance with the rising and setting of the sun without an external sensor. OBELISK top3 memory card / blutooth receiver is purchased separately. E 1330533.

Connection timer Selecta Astronomic Top3

Push Dimmer Dali Push

Push Dimmer Dali Push

Art. no.: 1360591

Small and flexible dimmer puck for phase dimmable drives and luminaires. For mounting in appliance / junction box. Dimmable on the primary side via Push (230V) or DALI signal. Pressure dimmer Round DALI has screw terminals that can handle cables up to 2.5mm² and memory function that lights up with the last set value after voltage drop.

Timing switch Astro, 12.81.8.230.0000

Timing switch Astro, 12.81.8.230.0000

Art. no.: 1330066

Astrour 1VXL 16A 230VAC.Programmed with NFC and / or Joystick. Switch ON / Switch OFF. 30 min interval. Large backlit screen. Easily accessible, replaceable battery. Memory for 50 modes.

Smart plug On/Off, 16A, Mesh, Bluetooth

Smart plug On/Off, 16A, Mesh, Bluetooth

Art. no.: 1377740

Smart plug on/off is placed in the electrical outlet to turn lighting or other equipment on and off. Control the plug wirelessly through other Plejd products or directly with the app via Bluetooth®. Can also be controlled through integration with third-party services, for this a Plejd Gateway is required .
On/off function, not dimmable.
Max 16A (3600W).
For indoor use only. IP20.

Smart plug On/Off, 16A, Mesh, Bluetooth

Smart plug On/Off, 16A, Mesh, Bluetooth

Connection timer Termina

Connection timer Termina

Art. no.: 1330500

The new digital top-3 series replaces the proven top-2 units, taking further steps forward in terms of function, energy efficiency and simplicity in programming. Programming can now be done via an App and then easily transferred to the timer via Bluetooth Low Energy .OBELISK top3 memory card / blutooth receiver is purchased separately.

Connection timer Termina

Timing switch Astro

Timing switch Astro

Art. no.: 1330552

Astronomical clocks are perfect to use when controlling outdoor lighting. The clock knows the sun's up and down when the user has programmed the city / city in the clock. The language is Swedish and Swedish towns / cities are pre-programmed. It is possible to deactivate the astro function separately for each channel to use the product as a pure timer. All watches can be programmed via an app together with Bluetooth dongle. The programs can also be sent from the app to another recipient if the program wants to be created remotely

Timing switch Astro

Universal dimmer 300VA LED mesh BT

Universal dimmer 300VA LED mesh BT

Art. no.: 1377701

Universal dimmer with two separate inputs for control using a push button or motion sensor. The product can be controlled wirelessly via the app or through other products from Plejd. It can also be controlled automatically with built-in time functions such as astro/time schedule. DIM-01 has adjustable minimum, maximum, and starting levels and can withstand loads of up to 300 VA.

Detector acoustic AD-500/600, Extronic

Detector acoustic AD-500/600, Extronic

Art. no.: 1306012

AD500/600 is a presence detector for energy-saving lighting control.
By listening to sounds from two different frequency ranges and analysing them, a presence may be detected.
The lighting is switched on by audibly undetectable, low frequency sounds that arise when a door is opened. The lighting then remains switched on by higher audio frequencies from footsteps and speech. The main function is automatic switching the lighting on/off by the presence/absence of the person. Switching on/off can be made in two separate channels, A and B.
Because the AD-500/600 is an acoustic detector, it can hear round corners and in rooms with shielding décor. This makes it especially suitable for stairwells, dressing rooms with cubicles, etc. The AD series acoustic detectors are complementary to the conventional technology where presence detection with passive IR is used.
The detector is available in two versions. The AD-500 can work completely alone. It is powered by 230VAC and in the enclosure there is a DIN rail with space for contacts if required for e.g. control of fluorescent lighting fixtures. The AD-600 has a standard plastic enclosure for mounting on the DIN rail. Since the AD-600 is placed in an electrical cupboard, at least one external microphone needs to be connected.
For AD-500/600, 6 extra microphones may be connected.

Presence detector PD-C360i Slave, Easylux

Presence detector PD-C360i Slave, Easylux

Art. no.: 1303234

Presence detector with 360° surveillance area for mounting on ceiling.
With a reach of 8 to 24 m in diameter for low-cost system expansion with up to 24 additional secondary devices
Especially suitable for installations at heights up to 10m, as in sport halls, warehouse halls, etc. Refers to the 24m model
The LEDs can be switched off via DIP switch
Dimming of interference sources through reduced sensitivity via DIP switch
Standard version as recessed unit •Surface mounting or ceiling mounting with accessories
Cover frame and design ring easily replaceable / paintable (available in silver colour as accessory)
Targeted dimming of areas using the supplied lens mask
The slave detector can be connected to the following presence detectors:
PD-C360i/8,PD-C360i/8plusPD-C360i/24plusPD-C360i/8 DIMplusPD-C360i/24 DIMplusPD-C360i/24 DUOplusPD-C360i/24 DRYPD-C360i/8 DaliPD-C360i/24 Dali

Presence detector PD-C360i Slave, Easylux

Dimmer DALI bcast 128mA DT8 BT

Dimmer DALI bcast 128mA DT8 BT

Art. no.: 1377749

DAL-01 is used to control lighting products via DALI bus with broadcast. The product has a built-in PSU for powering the DALI bus for up to 64 loads, therefore no additional equipment is needed except for a DALI fixture or driver. The product is prepared for tunable white (Device Type 8 DT8) for color temperature control. The DALI broadcast dimmer has two separate inputs for control with spring-loaded push button, motion detector or wirelessly through other products. The product also has built-in time functions such as astro and weekly clocks.

Dimmer DALI bcast 128mA DT8 BT

DIN mount for Shelly devices Standard

DIN mount for Shelly devices Standard

Art. no.: 1361288

The DIN bracket is mounted with the Shelly unit side forward, which saves space on the DIN rail, is easily removed/mounted without having to remove the cables first. The bracket ensures approximately 3mm air gap on both sides of the bracket to create heat/air circulation. If you have more Shelly units on the same DIN rail, the bracket always ensures 3mm air gap on both sides. Always follow the manufacturer of the active equipment's recommendations. The bracket clicks on and is easily removed with a screwdriver. The DIN bracket is designed for Shelly units with dimensions (HxWxD): 38 x 43.3 x 16.4 mm. Generally, all Gen3 and Gen4 models fit in this DIN bracket. Shelly 2.5 X1 does not fit in this DIN bracket. For the Shelly MINI series, see other E-no.
Made of flame retardant UL94 plastic. Always follow the manufacturer of the active equipment's recommendations.

Motion detector 160º BP Exxact

Schneider Electric

Motion detector 160º BP Exxact

Art. no.: 1301476

Exxact Motion detector 160º 10A with built-in push button 10A. LED 200W, 2200W R loads, 2000W halogen 230V, electronic transformer 1050VA, 500VA conventional transformer, 1000VA motor load. Requires zero. For recessed mounting in appliance box c/c 60mm, for surface mounting use box 35mm. Comes with Exxact Primo frame. White

Dimmer LED 400W

Dimmer LED 400W

Art. no.: 1360699

Digital dimmer that dims 1–100%. Can be combined with resilient pushbutton for control from several places. With overvoltage protection, short-circuit protection and overload protection. The minimum setting can be adjusted and has a start-up at a minimum of 10% or at the last setting above 10%. Center plates are included so that LEDDIM is adapted to Elko frames. Made of halogen-free and color-resistant polycarbonate.

Dimmer aDim 350

Dimmer aDim 350

Art. no.: 1360711

Recessed rotary dimmer that is optimized for LED lighting but also works with a light bulb and halogen. The dimmer also has the option to adjustable min. Level. Center plate 56mmx56mm RAL 9016 included. Black dimmer knob and center plate (RAL9005) are available as accessories.

Gateway Bluetooth Internet

Gateway Bluetooth Internet

Art. no.: 1377705

Gateway connects the user's Plejd mesh to the internet, enabling remote control of the Plejd system and activation of vacation mode. It also protects time functions in the event of power outages and enables integration with third-party services.
Connect the Gateway to the local network with the network cable and to a wall outlet with the power adapter. The product can be mounted on the wall with the included wall bracket.

Gateway Bluetooth Internet

Motion detector wireless corner mounted

Motion detector wireless corner mounted

Art. no.: 1307779

Our wireless sensor is used to automatically turn lights on and/or off based on presence. It has a detection range of up to 7 meters and a battery with an estimated lifespan of up to 10 years. The product's practical design enables discreet mounting in the corner of the room with screws or the supplied double-sided tape. Attendance control can be seamlessly combined with other control in your Plejd system such as push button, app and scheduling. Settings are made easily in the Plejd app.

Plug-in timer analogue IP20, Theben

Plug-in timer analogue IP20, Theben

Art. no.: 1330455

Analog plug-in timer, 1 channel, Daily schedule, 96 connection segments, Shortest connection time: 15 minutes, Without power reserve

Smart plug dimmer

Smart plug dimmer

Art. no.: 1377742

The Smart Plug Dimmer is placed in the electrical outlet and is used to control and dim lighting. Control it wirelessly via the app with Bluetooth®, through other Plejd products or use the integrated button. The SPD-01 is scheduled via the app. It is also compatible with third-party services, which requires a Plejd Gateway.

Transistor dimmer, insert, Trend

Schneider Electric

Transistor dimmer, insert, Trend

Art. no.: 1370640

Insert rotary dimmer for recessed IP20 mounting in apparatus box. For control of incandescent lamps and electronic transformers approved for light control. Push switch with step function. The insert will be supplemented with an optional frame E18 380 90-97, E18 381 90-97, E18 382 90-93.

Dimmer puck 200W LED

Dimmer puck 200W LED

Art. no.: 1360774

Dosdimmer 3.0 200W LED / 400W Styrspänning från 8-230V möjliggör också styrning med strömbrytare, antingen med svagströmsknapp eller vanlig kontakt med impulsfjäder. Kan monteras i de flesta apparatdosor. Dimmern har även memory-funktion.

Dimmer puck Wiser with neutral conductor Zigbee

Schneider Electric

Dimmer puck Wiser with neutral conductor Zigbee

Art. no.: 1360938

The Wiser MW LED dimmer puck from Schneider Electric is used to control and dim LED light sources and resistive or capacitive loads. Mulitwire technology - works with and without neutral wire Can be controlled with the Wiser app or locally with mechanical push buttons Dimmer is ZigBee 3.0 certified Equipped with green/red/orange LED programming indicator. Thanks to the Multiwire technology, the dimmer puck can drive LED loads below 1W/VA with the neutral conductor connected. The device has overheating protection, short circuit protection and automatic overload protection. The power consumption in standby mode is less than 0.3W. The load handling for 230V LED light is 200W, incandescent and 230V halogen lamp is 300W, and halogen lamp with standard electronic transformer is 300W. Product dimensions are (W) 45mm x (H) 45mm x (D) 18.5mm and product weight is 23g.

Astronomical timer switch, a-collection

Astronomical timer switch, a-collection

Art. no.: 1339895

Digital, astronomical timer from the a-collection, for control of, e.g., lighting and heating systems at dusk and dawn. The sunrise and sunset are calculated from the programmed town or coordinates. Create programs with daily/weekly schedules, and holiday programs. Built-in battery backup retains the programs during a power outage. Programming interface and manual in Swedish. Back-lit display with hour meter, service function, and PIN code.

Motion detector IS 2160, wall mounting

Motion detector IS 2160, wall mounting

Art. no.: 1312078

The IS 2160 is a basic motion detector with creep-under protection and a surveillance angle of 160°. It is intended for outdoor or indoor use and is used for the surveillance of smaller areas, e.g. garages, rubbish rooms, storage rooms, entrance halls, woodsheds, etc. The sensor is rotatable through 90° vertically and 40° degrees laterally, making it easy to set up in the surveillance area. Controls underneath for setting dusk level and after light times. Can be mounted on the wall. Cover sheeting is provided giving the opportunity of adjusting and limiting the surveillance area.

Motion detector IS 2160, wall mounting

Connection timer Eltako

Connection timer Eltako

Art. no.: 1339685

Digital timer switch with 2 channels. 1+1 NO potential-free contacts 16A /250V AC. "Standby" consumption only 0.03−0.4 watt. Modular unit for rail mounting according to DIN-EN 60715 TH35. 1 module = 18mm wide, 58mm deep. With patented Eltako Duplex technology (DX), the NO terminals, in case of 230V AC failure 50Hz, can be switched to zero crossing mode in order to considerably reduce wear. This is achieved by connecting the N conductor to the N connection, resulting in standby consumption of only 0.1 watt. Thanks to the use of bistable relay function, potential problems with coil loss effects and heat generation can be avoided, even when the relay is in operation.

Connection timer astronomical K Garo

Connection timer astronomical K Garo

Art. no.: 1330397

Day/Week clock is simple to program. On and off times are repeated daily or weekly, depending on how the clock has been programmed. The clock is available with 1-channel or 2-channel and the date and time are pre-programmed at delivery. All clocks can be programmed with a computer and the memory card available as an accessory, where application times can be easily moved between clocks.

Timer Day / Week

Timer Day / Week

Art. no.: 1330550

Day / week clock is easy to program. Switching on and off is repeated daily or weekly, depending on how the clock is programmed. The watch is available with 1-channel or 2-channel and the date and time are pre-programmed in the watch upon delivery. All watches can be programmed via an app together with a Bluetooth dongle, the programs can also be sent from the app to another recipient if you want to create programs remotely.

Timer Day / Week

Dimmer LED uni, Renova

Schneider Electric

Dimmer LED uni, Renova

Art. no.: 1360258

LED universal dimmer, 4-400W / VA rotary dimmer for light control. When adjusting the rear edge controlled LED lamp (RC) 4-200VA. Front edge controlled LED lamp (RL) 4-40VA. Incandescent lamps, 230V halogen lamps (R) and most types of electronic (C) / conventional transformers (L)

Dimmer LED uni, Renova

Rotary dimmer 370 LED with zero Wiser Zigbee

Schneider Electric

Rotary dimmer 370 LED with zero Wiser Zigbee

Art. no.: 1360786

Exxact connected rotary dimmer LED with the option of connecting a neutral conductor. Zi gbee 3.0. The following specification applies when the neutral conductor is connected: when regulating LED lamp (RC) 0-130 W, (RL) 0-80 W. Incandescent light 0-200W. Halogen 0-150W and most types of electronic (C)/conventional transformers (L) 0-150VA. Without connected neutral conductor, the following specification applies: LED lamp (RC) 7-130 W, (RL) 7-80W. Incandescent light 14-200W. Halogen 14-150W. For recessed mounting in a device box c/c 60mm, for surface mounting a 35mm box is used. Requires Wiser gateway, e-no. 17 240 04, to be able to manage the rotary dimmer via the Wiser by SE app. Via the app, you have the option to manage the rotary dimmer via mobile phone or tablet. The settings are made via the app. Communicates via Zigbee 3.0. IP20. Complete with optional Exxact frame.

Rotary dimmer 370 LED with zero Wiser Zigbee

Light sensor outside to Luna 108 plus Thebes

Light sensor outside to Luna 108 plus Thebes

Art. no.: 1301118

Exterior light sensor plus, rotatable, with clamp bracket and screw connections.

Wireless knob WRT-01-R

Wireless knob WRT-01-R

Art. no.: 1377772

Wireless turning enables wireless control of one or more products from Plejd's range. Configurable in the Plejd app. The WRT-01 is easily mounted on the outside of a standard device box or with double-sided tape or screws. Estimated battery life: up to 15 years. Radio: 2.4 GHz mesh, Bluetooth®, <10 dBm. Radio range: approx. 10 meters indoors. ATTENTION! The WRT-01 does not extend the range in Plejd mesh. Fits with frame from Schneider Renova®.

Wireless knob WRT-01-R

LED universaldimmer, Schneider Exxact

Schneider Electric

LED universaldimmer, Schneider Exxact

Art. no.: 1360113

Front (thyristor) or rear edge dimmer (transistor dimmer)
Universal dimmer automatically identifies connected load. It is not possible to mix inductive and capacitive loads.
For resistive/capacitive or resistive/inductive loads such as 230V halogen lamps, dimmable 230V LEDs, dimmable conventional or electronic transformers.
Can be supplemented with LED Nightlight using a kit consisting of white LED light mounted on the insert and a light guide mounted on the centre plate.
It is also possible to change the centre plate to a transparent colour insert or brushed steel.
For recessed IP20 mounting in an apparatus box c/c 60 mm or externally in surface-mounted box 35 mm.
Can be upgraded to IP44,sealing kit is used for recessed mounting and for external mounting
a surface-mounted box is used in IP44.Supplemented with optional Exxact frame.

LED universaldimmer, Schneider Exxact

DIN bracket for Plejd device

DIN bracket for Plejd device

Art. no.: 1360981

The DIN bracket mounts with the Plejd unit side forward, saves space on the DIN rail, is easy to detach/mount without first removing the cables. The bracket secures a 5mm air gap on both sides of the bracket to create heat/air circulation. If you have many Plejd units on the same DIN rail, the bracket always secures a 5mm air gap. Always follow the active equipment manufacturer's recommendations.

Speed regulator 400W

Speed regulator 400W

Art. no.: 1363148

Electronic speed regulator for motor operation. Triac control. Rotary switch. Starts at max. value. Delivered complete with cover, knob and centre lock of halogen-free thermoplastic, without fixing claws. The dimmer will fit in standard boxes with 60 mm attachment screw distance. If attachment screws are missing, use Elkos Dos-clips, E14 261 00. For surface mounting raising frames are used. Designed also for combination assembly.

Speed regulator 400W

Motion detector, Outdoor PIR IP55, Elko

Motion detector, Outdoor PIR IP55, Elko

Art. no.: 1301611

Motion detector for outdoor installation. Detects heat sources that move within the surveillance area (passive infrared technology) and can, e.g. light a lamp during a certain period. The time period starts from the beginning every time a motion is detected (activation function). The PIR can be mounted in the ceiling or on a wall. Fixture for mounting on outer corners or in inner corners is included.

Motion detector Basic MD180 L

Motion detector Basic MD180 L

Art. no.: 1300945

Motion detector with 180° monitoring area for convenient switching on of the lighting. Adaptation of detection and range using swivel and bendable ball joint technology. MD180 L has Zero-through switching and extra large connection space.

Push dimmer box-shaped, Vadsbo

Push dimmer box-shaped, Vadsbo

Art. no.: 1377439

Universal push dinner in a small box format for internal mounting in walls or apparatus boxes. Specially adapted for dimming of low energy and LED lamps. Also works excellently to when dimming LED actuators and incandescent bulbs.

Push dimmer box-shaped, Vadsbo

Push dimmer box-shaped, Vadsbo

Connection timer Mechanical SYN/SUL, Theben

Connection timer Mechanical SYN/SUL, Theben

Art. no.: 1330479

Compact timer that only builds 1 module, intended for mounting on a DIN rail in a standard housing or surface mounting in a separate touch-protected cover. With quartz operation. SUL 180A has a replaceable battery with about three days of running time. Permanent on or off switch and for automatic mode after set time interval. "

Connection timer Mechanical SYN/SUL, Theben

Presence detector 2DALI-DSI-1C-TAK, Rutab

Presence detector 2DALI-DSI-1C-TAK, Rutab

Art. no.: 1300187

Presence detector with DALI interface for dimmable constant light control. Sub ceiling mounting. 6.4m circular detection zone at a mounting height of 2.5m and 24m for motion. 2 directed light readings for 2 different lit areas with 25 starters each. Programmable for 2 or 3 push buttons with 1 or 2 lighting groups DALI and 1 potential-free relay for lighting/ventilation. Adjustable on the sensor or via remote control IR-PD4-TRIO-DALI. The slave units can be connected to extend the detection area.

Connection timer Selecta Astronomic Top2 Theben

Connection timer Selecta Astronomic Top2 Theben

Art. no.: 1330477

Astronomical timer does not require an external light sensor, instead the light is turned on and off according to the geographical parameters, longitude and latitude. Based on the geographical position, the clock calculates sunrise and sunset for the specified location for all days of the year. Intended for mounting on DIN rail. Three different models with one / two channels with astronomical daily / weekly program. Logical and simple text-oriented programming with clear menus. Clear text with high contrast on backlit screen.

Crown dimmer without neutral

Crown dimmer without neutral

Art. no.: 1360771

LDN200KRON requires no zero when connecting and is therefore optimal for installation where zero is missing in the device box or in a difficult-to-access installation environment. The dimmer is controlled by one or more resilient 1-pole pushbuttons (toggle switch). The dimmer has a memory function and retains the last set light level when switched on / off. Also applies when the dimmer has been de-energized. Adjustable boost function, as well as the lowest and highest dimmer level. Used for LED 0-100VA per channel, 230V halogen and electronic transformers.

Rotary dimmer LED 3-100W 1930

Rotary dimmer LED 3-100W 1930

Art. no.: 1360638

Slave rotary dimmer for Berker series 1930 Rotary dimmer LED 3-100W, supplemented with frame

Rotary dimmer LED 3-100W 1930

Rotary dimmer LED 3-100W 1930

Presence sensor IR Micro Office DALI-2 APC Master, completely recessed

Presence sensor IR Micro Office DALI-2 APC Master, completely recessed

Art. no.: 1301714

Ceiling-mounted presence sensor for smaller rooms such as offices, toilets, meeting rooms, etc. DALI-2 Master sensor for a lighting group DALI, broadcast function. Square motion detection 6×6 m, presence detection 4×4 m. The sensor's functions (dim/off/on, lighting scenario, daylight control, neighboring zone function, etc.) are set via the Steinel Connect app. Settings and configuration can be locked with a PIN code. Complete for recessed mounting.

DIN mount Pucks for Plejd device

DIN mount Pucks for Plejd device

Art. no.: 1370000

Save space in the electrical panel with Pucks – smart DIN mounting for Plejd. Pucks is a compact bracket that mounts Plejd devices on the short side and frees up to 60% more space in the electrical panel. It works both with and without Battery Backup – the back can be easily removed when Battery Backup is used. The back also has an integrated bracket for Wago connection terminals, which makes it easy to jumper wires. Pucks accommodates four 2-pole, 3-pole or two 5-pole Wago terminals – or a combination.

Controller 0/1-10V 16A mesh BT

Controller 0/1-10V 16A mesh BT

Art. no.: 1377702

Controller används som dosrelä/dosaktor för relästyrning upp till 16 A last och har nollgenomgångsdetektering/brytarskydd. Den kan också användas för styrning av tredjepartsprodukter med ingång för 0–10 V eller 1–10 V om LED-driftdon och HF-don.

CTR-01 har två separata ingångar för styrning med återfjädrande tryckknapp, strömställare eller rörelsevakt. Produkten kan styras trådlöst via appen eller genom andra produkter från Plejd. Den kan också styras automatiskt genom inbyggda tidsfunktioner som timer, astro-och veckour.

Controller 0/1-10V 16A mesh BT

Batteribackup för klocka

Batteribackup för klocka

Art. no.: 1377732

Battery backup is connected with a clip function to any Plejd puck and is used to maintain time functions, such as astro clock, in the event of a power failure in the Plejd system. Only one BAT-01 is needed per Plejd system, provided the products have wireless range to each other. The BAT-01 is installed on a DIN rail or on a wall. Power reserve up to 10 years.

Batteribackup för klocka

Motion sensor M46HC S BMS Dali high height surface mounted

Motion sensor M46HC S BMS Dali high height surface mounted

Art. no.: 1301412

This presence sensor is specially designed for large rooms with high ceilings. It is DALI-2 certified and can either extend the range of a DALI master sensor (353-852411) or combine it with other P47 or P48 DALI-2 master sensors in P40/M40 series The sensor can also be included as part of a DALI-2 BMS system.

Save time on installation and commissioning.
The sensor is designed for surface mounting. The screwless and easily accessible quick terminals make the sensor easy to install.

Reliable range tested to IEC63180
Niko P40 and M40 sensor series have been tested to the IEC63180 standard by third parties in a controlled environment. Automatic repeat tests ensure a reliable range.

Functions
• Reach: Ø53 meters at a mounting height of 12 meters
• Adjustable PIR sensitivity (4 levels) in 3 x 120°
• One or more PIR segments can be disabled
• Settings and configuration can be locked with a PIN code

Easy commissioning
• Communication with the overall BMS system takes place via the DALI bus
• If the sensor is to be used as a secondary sensor, it is connected to the DALI bus of the DALI-2 master sensor. It automatically starts communicating with the master without further commissioning.
• Event log records recent configuration changes

Dimmer DIN STD 400 LED

Schneider Electric

Dimmer DIN STD 400 LED

Art. no.: 1360220

DIN dimmer with memory and soft start function. The dimmer is specially adapted for LED lamps. "The many useful functions, including a smooth memory function and a soft start function, give you and your customers practical benefits. No minimum load is required, which means that the dimmers are particularly well suited for controlling LED lights. Other light sources can also be dimmed without problems. In addition, the advanced version STD400LED + (CCTDD20017) has additional practical features, including a wake-up and snooze function, various lighting modes and a stair switching function "

Dimmer DIN STD 400 LED

Motion detector MD 120, wall mounting

Motion detector MD 120, wall mounting

Art. no.: 1303110

Motion detector with 120° monitoring area for convenient switching on / off of the lighting
Prevents accidental activation, thanks to the built in switch for test functions and automatic operation.
Smooth connection for an easy, quick installation
Double membrane grommet for cables
Terminal socket with large coupling space and cable bushing at the top, bottom or reverse side
Accompanying plug clamps for running protective leads.
Adjustment of surveillance area and range using a rotatable, bendable ball joint technology
Protective cover with bayonet sockets for configuration elements. Prevents unintended parameter setting and protects against the wind and weather
For wall mounting
A special base for installation of inner and outer corners is available as an accessory

Motion detector MD-C360i, ceiling mounting

Motion detector MD-C360i, ceiling mounting

Art. no.: 1303200

"Motion detector with 360° monitoring area for ceiling mounting for need-based switching on/off of the lighting, which significantly lowers energy costs
Fits with 16 A high-power relay (tungsten contact) especially good for switching on/off capacitive loads such as e.g. EL-FDs, parallel-compensated fluorescent tubes, compact fluorescent tubes, energy-saving lamps
Automatic lighting control for use with or without very little daylight
Simple programming via remote control with "blue mode" technology or via setting element (potentiometer)
Built-in switch for setting with remote control or via setting slider - prevents incorrect operation and sabotage
Factory-set operating program for immediate commissioning
Blinding of interference sources by reduced sensitivity via DIP switches
Additional button input with switching function "Room = ON + OFF/corridor = ON"
Standard version as recessed unit
Surface mounting or ceiling installation with accessories
Cover frame and design ring easily replaceable/paintable (can be obtained in silver as an accessory)
Large connection space thanks to the small installation depth of the power box
Quick and easy connection with plug-in clamps
Expansion of the surveillance area with parallel connection of max. 8 detectors
Targeted dimming of areas using the included lens mask"

Speed regulator, LSI

Speed regulator, LSI

Art. no.: 1377221

For manual, step-less adjustment of speed of motors and fans. The most suitable motor type is all-current motors and outer motives with condenses and thermal protection. Design in encapsulation class IP44, intended for mounting in standard apparatus boxes or surface mounted in a special enclosure. Equipped with rotary switch and connection for e.g. a damper. Trim potentiometer for minimum speed. 5 sizes cover most small motors from bathroom fans to ventilation units.

Showing 52 of 273