Order lines: 0

Ahlsell Products ElectricMains power supply equipment 06-09

Mains power supply equipment 06-09

06 Mains power supply equipment

06 Cable protection equipment

06 EBR and Function sets

06 Signs and labelling

06 Lightning protection and equipotential bonding

06 Surge arrester

06 Transmission

07 Wiring cabinets and accessories

08 Connection equipment

09 Electricity meter

Ahlsell helps you find power grid materials for all of your assignments. Here you will find cable cabinets and accessories for a safe and smooth professional installation. In your job, customers want work to finalize projects fast as the power supply is a vital part of our society. The electricity grid is like a train track, where we transport the necessary electricity to households and businesses that need it. You need different types of specialist grid materials for a safe and stable electricity grid. We offer products such as earthing & lightning protection, joint sleeves, street lighting cabinets, and other specialist equipment. In our wide range of products, you will find products from several major suppliers. You can explore our wide range of electricity grid materials and accessories in our online store or visit your nearest Ahlsell shop.

Products (1400)

Cable lug KR

Art. no.: 0825018

Tinned lugs with inspection holes for multi-wire and stranded CU leads.
Recommended tools:
Size - Press tool
KR0,75 – KR6 DKB0760
KR4 – KR10 GWB4099

HAN Module

Art. no.: 9860005

The HAN module for electricity meters from Kamstrup type OMNIPOWER. The module is plugged into the electricity meter and is used for, for example, reports of current from solar cells or wind turbines, load control of electric car chargers, monitoring of electricity consumption, etc. Ensure that the power grid company can activate the HAN Module.

Screw pin sleeve 1kV 50-240 sqmm

Screw pin sleeve 1kV 50-240 sqmm

Art. no.: 0812485

The mechanical screw cable lug is made of tinned aluminum, and has torque-controlled bolts that ensure the correct torque every time it is installed. All bolts are hexagonal bolts. The screw cable lug is made with transverse grooves on the inside for the best tensile strength of the conductor. When the sleeve is tinned, it can be used for both aluminum and copper. Melbye's mechanical screw cable lug for 1kV is tested for class 5, multi-wire copper conductor. All products are tested according to IEC-61238-1, 2018 class A.

Transformer, 22 KV

Transformer, 22 KV

Art. no.: 0690466

Three-phase, oil-insulated distribution transformer, hermetically sealed.

Earth rod jointed with copper-plated steel.

Earth rod jointed with copper-plated steel.

Art. no.: 0681302

Copper thickness 500 µm

Grounding rod type A

Grounding rod type A

Art. no.: 0683638

Jointable ground spike made of hot-dip galvanized steel. Type A solid with 3-fold grooves. 25 mm diameter, length 1500 mm.

End sleeves TWIN, insulated

End sleeves TWIN, insulated

Art. no.: 0823304

Made of copper. Insulation of polypropylene.

End sleeves TWIN, insulated

End sleeves TWIN, insulated

End sleeves TWIN, insulated

End sleeves TWIN, insulated

Earth rod jointed with hot-dip galvanised steel.

Earth rod jointed with hot-dip galvanised steel.

Art. no.: 0681301

Zinc thickness 60 µm

Heat shrink tubing MWTM

Heat shrink tubing MWTM

Art. no.: 0778025

Shrinkage range from 25 to 8 mm.

Splice sleeves KS

Splice sleeves KS

Art. no.: 0825212

Tinned extension sleeves with inspection holes and cable stop for stranded and multi-wire leads.
Recommended tools:
Size -Tool system
KS0,75– KS6 DKB0760
KS4 – KS6 EWB4099
KS10 EWB4099, V600

Splice sleeves KS

Splice sleeves KS

Splice sleeves KS

Splice sleeves KS

Splice sleeves KS

End sleeves insulated

End sleeves insulated

Art. no.: 0823300

Insulated end sleeves. Of soft, tinned copper with collar of coloured polypropylene.

End sleeves insulated

End sleeves insulated

End sleeves insulated

End sleeves insulated

End sleeves insulated

Hanging equipment ECH, NKT

Hanging equipment ECH, NKT

Art. no.: 0648050

Suspension device in two different designs from NKT Cables.

Press tool T2600

Press tool T2600

Art. no.: 0820140

uses: For contact pressing of
- copper connections of type KRF/KSF 10-95 mm²,
- aluminium connections 16-25 mm² (-35 solid),
- C-sleeves 6/6-50/50.
Mechanical hand pliers with built-in locking system that guarantees that the pressing action cannot be interrupted until the contact pressing is complete without a special action. Supplied in metal box.
The same hills, mandrels and dies as the press head V600..
Press force 57 kN.

Ring connector R

Ring connector R

Art. no.: 0822012

Made of tinned copper. Insulation of halogen-free PC with “easy-entry".

Ring connector R

Ring connector R

Ring connector R

Ring connector R

Ring connector R

Crimping tool PZ 10 Hex

Crimping tool PZ 10 Hex

Art. no.: 1660791

Crimping tool PZ 10 HEX, for end sleeves with / without plastic collar 0.14 mm², 10 mm², Hexagon.

Crimping tool PZ 10 Hex

End cap, all pipes

End cap, all pipes

Art. no.: 0661538

End caps for all pipes.

End cap, all pipes

End cap, all pipes

End cap, all pipes

End cap, all pipes

Cable joint 1kV, SJPK Papper-Plast

Cable joint 1kV, SJPK Papper-Plast

Art. no.: 0702126

Cable splice 1kV, 4-lead paper cable for 4-lead plastic cable.

Cable joint 1kV, SJPK Papper-Plast

Cable joint 1kV, SJPK Papper-Plast

Crimping tool miniforce, insulated connections

Crimping tool miniforce, insulated connections

Art. no.: 1630085

For pressing of insulated connections.
With a locator that holds the lug in the correct position during pressing and facilitates work, e.g. in confined spaces.

Crimping tool miniforce, insulated connections

Crimping tool miniforce, insulated connections

Cable chambers PP

Cable chambers PP

Art. no.: 0661973

Rise pipe, well without cover/bottom.
Made from recycled PP material for a lower fossil footprint.
Simpler well for splicing and distributing power cable and optical cable.
Hole cutting is done with a hole saw.

Cable chambers PP

Fork-type cable lug, insulated

Fork-type cable lug, insulated

Art. no.: 0813328

Insulated fork-type cable lug made of tinned copper (99.95% Cu) with halogen-free insulation. The easy-entry design facilitates cable insertion and enables quick and easy installation in screw terminals. Suitable for use at temperatures ranging from -40 °C to +120 °C.

Fork-type cable lug, insulated

Fork-type cable lug, insulated

Fork-type cable lug, insulated

Fork-type cable lug, insulated

Fork-type cable lug, insulated

Al line AMO

Art. no.: 0620219

Aluminium line AMO. In accordance with EN 50182.

Fuse switch disconnector SLD63 SLD 63

Fuse switch disconnector SLD63 SLD 63

Art. no.: 0732704

AC-21B in accordance with SS-EN 60947-3 at 400 A. Diazed fuses, DII or DIII. Can be sealed.

Shielded Cable connector, 12kV, CSE-A

Shielded Cable connector, 12kV, CSE-A

Art. no.: 0702010

Shielded connections for PEX-insulated 1- or 3-wire cables with Al or Cu wires. Standard: CENELEC HD 629.1 S2.

The joint body is made of rubber in three layers: a conductive inner layer, an insulating layer and a conductive outer layer that are all vulcanised together.
The cable connection contains both capacitive Indication with protection and an integrated earthing wire.
- Meets safe contact requirements.
- Can be installed both indoors and outdoors.
- Delivered in a 3-phase kit complete with cable shoe, screw connection, and field-control adapter with design that ensures reliable installation.
- The screen separation kit, e-no. 0702358/0702359, must be used for 3-wire cables. Ordered separately.
630A, Angled connector.

Electric meter 3-phase aEnergy

Electric meter 3-phase aEnergy

Art. no.: 0910000

3-phase energy meter approved for charging (MID) for 65A with M-bus. Width 3 modules. Backlit display.

Deep soil spike 110

Deep soil spike 110

Art. no.: 0680568

Deep soil rod 1.5m Cu/Fe.

Potential equalising rails

Potential equalising rails

Art. no.: 0683673

A potential equalisation busbar is used for collecting all earthed wires, incl. intermediate metal sheeting from VA etc. in order to avoid great potential differences which may occur. POT1 has many different connection options, which makes it practical in almost all applications.
Other busbars have stronger bolt connections (M10x25 incl. nuts, snap ring and insulators) for somewhat greater applications.

Potential equalising rails

Potential equalising rails

Press jaws BC

Art. no.: 0820256

uses: For oval pressing of branching sleeves E 08 253 02-48 with press heads V1300 and V250.
For press head V1300 use the inner jaw holder V1316 and outer jaw holder V1318.
For press head V250 use the inner jaw holder V2506 and outer jaw holder V2508.

*Used without jaw holder.

Cable tube SRS PVC

Cable tube SRS PVC

Art. no.: 0661446

Level cable protection pipe of PVC. Supplied in 6 m lengths. Also used as SRN pipe.
Marked "Kraftkabel SRS".

Cable tube SRS PVC

Press tool T3165A1

Press tool T3165A1

Art. no.: 1630135

uses: For pressing of copper connections, type KRF/KSF 10-70 mm².
With a built-in locking system that guarantees that the pressing action cannot be interrupted until the contact pressing is complete without a special action. Press wheel with rolled steel which gives high strength.
Press force 35 kN.

Pole climbing shoe Ego-Lett

Pole climbing shoe Ego-Lett

Art. no.: 1655061

Made of forged aluminium alloy. Adjustable foot sole to suit large and small feet. Level foot version. Tested and approved by the Swedish National Testing and Research Institute according to 1984:1.

End cap 102L

TE Connectivity/Raychem

Art. no.: 0776412

Use:For sealing and protection of cable ends.
Standard:Raychem PPS 3011 and 3012.
Design:Made of polyolefin, with medium-thickness wall. The cap is internally coated with adhesive that melts and seals against the cable during shrinking. For paper cables, the caps can handle up to 0.05 mPa internal pressure over the temperature range -30°C to +70°C. For plastic cables, -40°C to +120°C.

Cable pipe SRE, 6 m

Cable pipe SRE, 6 m

Art. no.: 0661094

Pipelife cable protection pipe for installation in extreme environment and above ground (SRE-P) in lengths of 6 meters. Splicing is done via butt welding or alternatively with electric welding sleeves. Suitable for placement in urban environment.

Cable pipe SRE, 6 m

Cable connection RSTI, 3-wire, 24kV

TE Connectivity/Raychem

Cable connection RSTI, 3-wire, 24kV

Art. no.: 0706781

Single connection, 3-wire. With part shielding kit. Slack length 2 metres.

Heat-shrink tube CGAT

TE Connectivity/Raychem

Heat-shrink tube CGAT

Art. no.: 0776093

Shrink tubing made of Polyolefin on coil with adhesive coating. For use where a moisture-proof dressing is required. Shrinking ratio 3:1.
Shrinkage temperature 125°C.
Temperature range: -30°C to +80 °C.
Black colour.
Supplied in single units of 1.2 m.
Heat tool for LPG, Sievermatic, see E 16 504 80.

Rebate clamp, plate thickness up to 10 mm

Rebate clamp, plate thickness up to 10 mm

Art. no.: 0681389

For wires Ø8-10 mm along or across seam max. 5 mm.

Spark gaps kits composite insulators

Spark gaps kits composite insulators

Art. no.: 0650074

Used together with insulator kit SDP90282.1815; E0624807.

Earth rod CGA

Art. no.: 0632006

The ground bar is made of high-grade steel covered with a housing of copper inseparably unified with the steel.

Heat-shrink tube WCSM

TE Connectivity/Raychem

Heat-shrink tube WCSM

Art. no.: 0776492

Crimping hose for insulation and mechanical protection. Insulating characteristics and flexible use make the hose ideal as insulation for cable splicing, a replacement jacket for damaged cables, and corrosion protection on metal-jacketed cables.

Standard: Raychem PPS 3013 and 3012.

Design: Thick wall. Halogen-free. Made of modified polyolefin. Excellent physical characteristics, durable and corrosion-resistant against acids. Used as an outer jacket in Raychem’s low- and high-tension cables. The adhesive melts when the hose is heat-shrunk, sealing the application. Continuous operating temperature-40°C to +120°C.
Length of 1000 mm, adhesive coated.

Heat-shrink tube WCSM

Heat-shrink tube WCSM

Heat-shrink tube WCSM

Heat-shrink tube WCSM

Heat-shrink tube WCSM

Chamber section C2, Melbye

Chamber section C2, Melbye

Art. no.: 0666350

C2 stands for Carriageway Fortress. That is, a very strong and powerful building that is intended to withstand everything! This matches C2 extremely well, it has namely been tested to withstand 60 tons. Is suitable for D400-applications, but can also be used to advantage as a loop-/splice well in the fibre network. C2 is a section well where the sections are 150mm high, but there is also a top section that measures 75mm. The latter is sealed and can only be used at the top. Manufactured by injection moulding of nitrogen foamed high density polyethylene. This makes it easy to install thanks to its low weight. Choose a two-part B125 or four-part cover D400, both of which are lockable with a Pentahead bolt. There is also a lockable inner cover for C2. It comes pre-installed in a section for simplicity’s sake and is supplemented with your own padlock.

End caps SEC

Art. no.: 0778032

End sleeves are used to protect the cable end against moisture and dirt. The end sleeves are particularly useful when the cables are stored outdoors. The sleeves fit both plastic- and paper-insulated 1 kV cables, as well as telecommunications cables. UV resistant, halogen-free, and have adhesive.

Clamp for round wires, OBO

Clamp for round wires, OBO

Art. no.: 0681451

Clamps for potential equalisation busbar, of galvanised steel.

Clamp for round wires, OBO

Cover for cable chamber SW1730

Cover for cable chamber SW1730

Art. no.: 0666298

Cover for well SW1730 series.

Cover cast iron B125 for cable chamber FF9060

Cover cast iron B125 for cable chamber FF9060

Art. no.: 0666294

Choose the right kind of cover that the installation requires -A15 B125 or D400. The A15 cover to FF9060 is manufactured in HDPE and is lockable with a Penta Head Lock. The B125 cover is manufactured in cast iron and is suitable for installation in parking areas and areas with slow moving vehicles. The B125 cover is lockable with a Penta Head Lock and has a 70 or 120mm frame depending on the model. The D400 cover is manufactured in cast iron and is suitable for installations with high traffic. Both have 2 parts, one is lockable with a frame, the other is not lockable and has no frame. Note that different installation instructions are suitable for D400 applications. With a D400-installation the three highest sections should be intact. Therefore the well should be at least 5 sections deep in such an installation.

Cover for cable chamber FF12267

Cover for cable chamber FF12267

Art. no.: 0665429

Choose the right kind of cover that the installation requires - B125or D400. The B125 cover to FF12267 is manufactured in cast iron and is suitable for installation in parking areas and areas with slow moving vehicles. The B125 cover is lockable with a Penta Head Lock and has a 70mm frame. The D400 cover is manufactured in cast iron and is suitable for installations with high traffic. The come in four parts with a 140mm frame and lockable. Note that different installation instructions are suitable for D400 applications. With a D400-installation the three highest sections should be intact. Therefore the well should be at least 5 sections deep in such an installation.

Cover for cable chamber FF12267

Cover for cable chamber FF12267

Cast iron cover C2 B125

Cast iron cover C2 B125

Art. no.: 0666352

Manhole C2-cover B125 Cast iron, lockable with pentahead bolt, two part, integrated moving frame of 85mm.

Cover for cable chamber FF12267

Cover for cable chamber FF12267

Art. no.: 0666349

Choose the right kind of cover that the installation requires - B125or D400. The B125 cover to FF12267 is manufactured in cast iron and is suitable for installation in parking areas and areas with slow moving vehicles. The B125 cover is lockable with a Penta Head Lock and has a 70mm frame. The D400 cover is manufactured in cast iron and is suitable for installations with high traffic. The come in four parts with a 140mm frame and lockable. Note that different installation instructions are suitable for D400 applications. With a D400-installation the three highest sections should be intact. Therefore the well should be at least 5 sections deep in such an installation.

Smooth cable protection tube yellow, SRN

Smooth cable protection tube yellow, SRN

Art. no.: 0661104

Smooth cable protection pipe of recycled PP with cone sleeve, marked Power cable, EBR designation SRN.

Smooth cable protection tube yellow, SRN

Clamp AP, Magnelis

Clamp AP, Magnelis

Art. no.: 1501480E

Clamps for rigid pipes with oval holes to facilitate assembly! Surface treated with Magnelis® and approved according to corrosivity class C5 – perfect for Nordic climate and marine environments. Magnelis® also has a unique ability to self-heal in drilled holes, weld seams and cut surfaces.

Clamp AP, Magnelis

Clamp AP, Magnelis

Clamp AP, Magnelis

End sleeve for two leads

End sleeve for two leads

Art. no.: 0890852E

End sleeves with insulating collar. The use of end sleeves ensures a long-term consistent quality of electrical connections and simplifies installation of multi-wire conductors.

End sleeve for two leads

End sleeve for two leads

End sleeve for two leads

Splice sleeves KSF

Splice sleeves KSF

Art. no.: 0825216

Tinned extension sleeves with inspection holes and cable stop for stranded and multi-wire leads.
Recommended tools:
Size-Tool system
KSF16 – KSF95 V600
KSF16 – KSF400 V1300
KSF120 – KSF400 V250

Splice sleeves KSF

Splice sleeves KSF

Splice sleeves KSF

Splice sleeves KSF

Splice sleeves KSF

Round conductor 10mm stainless steel V4A

Round conductor 10mm stainless steel V4A

Art. no.: 0681834

Round conductor 10mm stainless steel V4A

Screw set for rail industrial model

Screw set for rail industrial model

Art. no.: 0681881

Screws 45 mm M10x20mm. Screw set for equipotential bonding rail industrial model.

Showing 52 of 1400