Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricInstallation equipment 11-1817 17 Property automation / IoT

17 17 Property automation / IoT

KNX
DALI System
Comical systems
LoRa
Z-wave
Radio system
Wiser by SE
Shelly

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Products (171)
W-DALI wireless
LumenRadio
W-DALI wireless
Art. no.: 1790015
W-DALI is something as simple and powerful as a wireless DALI cable, a perfect alternative to running new DALI cabling when renovating and upgrading an old installation. With W-DALI, the electrical cable does not need to be replaced, it can be reused for the new lighting. W-DALI transmits all DALI communication between luminaire and DALI controller wirelessly. Compared to running new cabling for DALI, a lot of money is saved due to reduced installation time and simplified planning. Since W-DALI transmits all DALI commands completely transparently in both directions between DALI control unit and luminaire, programming and commissioning a DALI system remains the same as with DALI cable. There is no requirement to learn a new lighting control system, everything remains as before except for the DALI wiring.
W-DALI wireless
Input module WiFi i4 Gen3
Shelly
Input module WiFi i4 Gen3
Art. no.: 1302006
Shelly I4 and I4 DC Gen3 are input modules that enable customers to make common switches, push buttons, motion sensors and similar devices smart. Shelly I4 Gen3 has four inputs with four functions per input (1, 2 and 3 short presses and long presses) and enables manual sending of wireless commands to activate or deactivate scenes, send webhooks or perform complex scenarios.The devices can control other Shelly relays, dimmers, sensors or HTTP and MQTT controlled devices.

The Shelly I4 Gen3 is easily configured and controlled via the Shelly Smart Control app or your preferred smart home system. Shelly devices work 100% locally and only require a local network to operate. Shelly can be used alone in the Shelly Smart Control app or with over 200 partner systems such as Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.

•Shelly I4 and I4 DC Gen3 have many uses. The Shelly I4 Gen3 can be powered by 110-230 VAC and the Shelly I4 DC Gen3 can be powered by 5-24 VDC.

For example, Shelly I4 can be used for:
•To make ordinary switches smart
•To make motion sensors smart
•To make smoke detectors with relay output smart
•Shelly I4 DC can be used for low voltage installations and for example converting an old IHC installation to Shelly.

All Shelly WiFi devices have a built-in web server, which means you get a wealth of features that always work. The built-in web server means that Shelly has built-in memory and therefore remembers sunrise, sunset, schedules and more, even when the network goes down. Relays and dimmers work like normal rocker relays and can therefore be used with your usual switches - even without internet. All inputs and outputs are fully programmable and only require local wifi to communicate between devices. However, we recommend having an active internet connection as it opens up even more features.
Push button Shelly BLU RC Button 4
Shelly
Push button Shelly BLU RC Button 4
Art. no.: 1893145
The Shelly BLU RC Button 4 is a small remote control with four buttons that can be easily set up to control your lights, curtains, garage door, your lighting scenes or anything else. The remote control comes with a holder and frame that can easily be screwed to the wall. The actual the remote control has a magnetic back, so it can be removed from the holder and placed on the coffee table or bedside table.

Shelly BLU RC Button 4 uses Bluetooth technology, which provides lightning-fast response and execution of actions and long battery life. The device can use any Shelly Pro, Shelly Plus and Shelly Gen3 device as a gateway to the network. This means that when you have another Shelly device installed on WiFi, it will automatically act as an access point for Shelly Bluetooth devices to the network.

Shelly BLU Button 4 can perform up to four actions or scenes per button: single, double, triple and long press.

Functions
•Script functionality provides endless possibilities.
•Full compatibility with Home Assistant, Homey and all other devices supported by the BTHome protocol.
•Uses BLE technology.
•Can turn appliances on/off, dim and activate scenes.
•Encrypted wireless signals.
•Range of 10m indoors and 30m outdoors.
•Works with Pro, Plus and Gen3 devices.
Relay Wifi Pro 1PM Shelly with power measurement
Shelly
Relay Wifi Pro 1PM Shelly with power measurement
Art. no.: 1302013
The Shelly Pro 1PM is a WiFi-controlled 1-channel 16A relay with power measurement for DIN rail mounting and provides easy management and automation of lighting, workstations, copiers, pumps and more.

Shelly's Pro 1PM is easy to set up and control through the Shelly Smart Control app or your preferred smart home system. Shelly devices work 100% locally and only need a local network to work. Shelly can be used alone in the Shelly Smart Control app or with more than 200 partner systems such as Google Home, Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.

Shelly Pro 1PM has many uses. It can be supplied with 110-240 VAC. With a built-in power meter, Shelly Pro 1PM allows you to monitor energy consumption and create automations to reduce consumption. The Shelly Pro 1PM has two switch inputs that are optional to use. That makes Shelly Pro 1PM useful for many purposes, including:
•Lighting control
•Control of power-consuming devices
• Management of workplaces and the possibility of eliminating standby consumption
•Heat control

Shelly Pro 1PM can be connected to the Internet or the local network via 2.4 GHz WiFi and/or via RJ45 LAN cable. In addition, the device has built-in Bluetooth, like the rest of the Pro and Plus devices, which means it can also be used as a gateway for Shelly's battery-powered Bluetooth devices.

All Shelly devices work locally without connecting to the Shelly Cloud, but it is recommended to enable this for easy data storage and increased functionality. Devices can also communicate via MQTT, HTTP and WebSocket. All support TLS.
Relay Wifi Pro 4PM Shelly with power measurement
Shelly
Relay Wifi Pro 4PM Shelly with power measurement
Art. no.: 1302016
Shelly Pro 4PM is a WiFi-controlled 4-channel 4x16A relay (max 40A in total) with power measurement for DIN rail mounting. Shelly Pro 4PM can be used to automate four channels of lighting, workplaces, heating control and the like. The four integrated power meters provide at the same time possibility to measure consumption for each channel separately (PM = Power Metering) Please note that Shelly Pro 4PM can only be supplied from a single phase.

Shelly's Pro 4PM is easy to set up and control through the Shelly Smart Control app or your preferred smart home system. Shelly devices work 100% locally and only need a local network to work. Shelly can be used alone in the Shelly Smart Control app or with more than 200 partner systems such as Google Home, Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.

Shelly Pro 4PM has many uses. It can be supplied with 110-240 VAC. With built-in power meter on four individual outputs, Shelly Pro 4PM provides the ability to monitor energy consumption and create automations to reduce consumption. It is also possible to combine the unit in a heating control with Shelly temperature sensors. The Shelly Pro 4PM has four switch inputs that are optional to use. That makes Shelly Pro 4PM useful for many purposes, including:
•Lighting control in four channels
•Control of wall sockets
•Heat control
•Fan control
•Monitoring of consumption at workplaces and elimination of standby consumption.

Shelly Pro 4PM can be connected to the Internet or the local network via 2.4 GHz WiFi and/or via RJ45 LAN cable. In addition, the device has built-in Bluetooth, like the rest of the Pro and Plus devices, which means it can also be used as a gateway for Shelly's battery-powered Bluetooth devices.
Smartplug Shelly S Gen3
Shelly
Smartplug Shelly S Gen3
Art. no.: 1893213E
Shelly Plug S Gen3 is a compact smart plug with many built-in functions that easily make floor lamps and household appliances smart. The device has a 12A relay with built-in power meter, so you can monitor your consumption and automatically turn off unnecessary standby consumption. With built-in schedule and sunrise/sunset control you can also automate the control of all your devices.

The Shelly Plug S Gen3 is easily set up and controlled through the Shelly Smart Control app or your preferred Smart Home system. Shelly devices work 100% locally and only need a local network to work. Shelly can be used alone in the Shelly Smart Control app or with more than 200 partner systems such as Google Home, Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.

The Shelly Plus Plug S is designed to be used in the building's existing wall sockets, enabling intelligent control of non-smart devices such as floor lamps. It can also be used to eliminate standby consumption on TV, Playstation and the like or to increase safety by automatically turning off the iron after a few minutes. If you only want to use the device to monitor the power consumption of appliances or similar, it is also possible to set a PIN code on the Shelly Plug S, so that the device cannot be accidentally switched off via the app. The Shelly Plug S is equipped with a powerful LED ring on the front, which can visualize the amount of current energy consumption by switching between green, yellow and red light. The light can of course also be turned off or used as a night light when you or the children get up at night.

Shelly Plug S can be connected to the Internet or the local network via 2.4 GHz WiFi. In addition, the device has built-in Bluetooth just like the rest of the Pro, Plus and Gen3 devices, allowing it to be used as a gateway to Shelly Bluetooth devices at the same time.
Add-on module Shelly Plus
Shelly
Add-on module Shelly Plus
Art. no.: 8580778
The Shelly Plus Add-On is a small module that can be clicked onto any Shelly Plus unit, adding a wealth of new functionality to the Shelly units. The Shelly Plus Add-On has both digital and analogue input and can be connected to up to five temperature sensors or a single temperature and humidity sensor.

When the Shelly Plus Add-On is added to a Shelly Plus device, it must be activated in the app, after which it is possible to activate the sensors that have been connected to the device. The device supports the following types of devices:
•Up to 5 temperature sensors of type DS18B20
•Temperature and humidity sensor type DHT22
•NTC resistor with 10 kΩ nominal resistance and β=4000 K
•Photocells
•PIR sensors
•Soil moisture sensors
•Ultrasonic proximity sensors
•Capacitive water level sensors
•Sound sensors
•Other analog sensors with 0 - 10 V output voltage

Examples of use
•Door contact: add a door contact to your Plus Add On to monitor the open/closed position of the garage door. Recommended together with Shelly Plus 1.
•Water level sensor: add a level sensor to the Plus Add On to monitor the water level in your pool or aquarium. Recommended together with Shelly Plus 1 or Plus 1PM.
•Heating: add two DS18B20 temperature sensors and measure your supply and return temperature.
•Wind: with an anemometer, your awning can automatically retract when it starts to blow. Recommended together with Shelly Plus 2PM.
•Soil moisture: add a soil moisture sensor so the irrigation system can automatically start when the grass is too dry. Recommended together with Shelly Plus 1.

Connection
Shelly Plus Add On does not work standalone. The device will snap into any Shelly Plus device, providing increased functionality to the Shelly Plus device. The Shelly Plus Add On does not need to be wired to the Shelly Plus unit, as it is equipped with pins that automatically connect to the Shelly Plus unit. The two units are galvanically isolated from each other.
Dimmer puck Wiser with neutral conductor Zigbee
Schneider Electric
Dimmer puck Wiser with neutral conductor Zigbee
Art. no.: 1360938
The Wiser MW LED dimmer puck from Schneider Electric is used to control and dim LED light sources and resistive or capacitive loads. Mulitwire technology - works with and without neutral wire Can be controlled with the Wiser app or locally with mechanical push buttons Dimmer is ZigBee 3.0 certified Equipped with green/red/orange LED programming indicator. Thanks to the Multiwire technology, the dimmer puck can drive LED loads below 1W/VA with the neutral conductor connected. The device has overheating protection, short circuit protection and automatic overload protection. The power consumption in standby mode is less than 0.3W. The load handling for 230V LED light is 200W, incandescent and 230V halogen lamp is 300W, and halogen lamp with standard electronic transformer is 300W. Product dimensions are (W) 45mm x (H) 45mm x (D) 18.5mm and product weight is 23g.
Temperature / humidity sensor Wiser Zigbee
Schneider Electric
Temperature / humidity sensor Wiser Zigbee
Art. no.: 1301086
Wiser temperature and humidity sensor provides the opportunity for full control of temperature and humidity in the home. Advantageous in rooms where there is no thermometer or where the radiators are not optimally placed. Examples of spaces are dining area, living room, bathroom / toilet, laundry / utility room, basement, attic and garage. The unit provides information on temperature, humidity and temperature increase. The sensor can also be used to activate various functions in the home. For example, you can have the sensor in the attic and if the temperature is too low, you can have a heating fan connected to a Wiser smart plug, e-no. 17 240 05, which is activated via a set automation. The sensor is connected and managed via the Wiser app. You must also have a Wiser gateway, e-no. 17 240 04, to be able to monitor the sensor via the app. Communicates via Zigbee 3.0. IP20. Battery 3V / CR2450 with 5 years operating time. White. Dimensions: 45x45x17mm.
Temperature / humidity sensor Wiser Zigbee
Modbus RTU wireless Compact
LumenRadio
Modbus RTU wireless Compact
Art. no.: 1790057
Modbus RTU Compact: Wireless Modbus RTU (RS485). For wall mounting, Swedish made.

Small format for quick installation on or in the wall
– Click mounting
– No DIP switches
– Screw terminals

For hotels, offices, shops etc. Room control, VAV units, fan coils etc.

Modbus RTU via reliable wireless mesh network. W-Modbus replaces the Modbus RTU cable with a reliable wireless mesh network – eliminating time-consuming installation planning, wiring, daisy chaining and troubleshooting. Plug-n-Play: No programming required. Enables energy savings and meets sustainability goals with wireless control. The W-Modbus product acts as a proxy for a connected Modbus RTU device, effectively extending the bus and making it possible to make wired products wireless. A W-Modbus network consists of a single W-Modbus gateway with up to 100 W-Modbus nodes.

W-Modbus is based on LumenRadio's patented mesh technology MiraMesh – which offers extremely reliable device-to-device communication, easy installation, simultaneous Bluetooth and extended range. With LumenRadio's W-Modbus solution, it is possible to create a wireless Modbus RTU system that maintains the Modbus RTU standard, while maintaining low latency.
Rotary dimmer 370 LED with zero Wiser Zigbee
Schneider Electric
Rotary dimmer 370 LED with zero Wiser Zigbee
Art. no.: 1360786
Exxact connected rotary dimmer LED with the option of connecting a neutral conductor. Zi gbee 3.0. The following specification applies when the neutral conductor is connected: when regulating LED lamp (RC) 0-130 W, (RL) 0-80 W. Incandescent light 0-200W. Halogen 0-150W and most types of electronic (C)/conventional transformers (L) 0-150VA. Without connected neutral conductor, the following specification applies: LED lamp (RC) 7-130 W, (RL) 7-80W. Incandescent light 14-200W. Halogen 14-150W. For recessed mounting in a device box c/c 60mm, for surface mounting a 35mm box is used. Requires Wiser gateway, e-no. 17 240 04, to be able to manage the rotary dimmer via the Wiser by SE app. Via the app, you have the option to manage the rotary dimmer via mobile phone or tablet. The settings are made via the app. Communicates via Zigbee 3.0. IP20. Complete with optional Exxact frame.
Rotary dimmer 370 LED with zero Wiser Zigbee
IOTSU AQ Combo
Small Data Garden
IOTSU AQ Combo
Art. no.: 98360301
The IOTSU® AQ Combo is a high quality indoor wireless device designed to measure and record changes in air quality for statistical analysis or monitoring purposes. Air quality is assessed as a combination of temperature, humidity, carbon dioxide concentration and the concentration of volatile organic compounds (VOC). The device can be mounted on any surface within the monitored building. Installation of this maintenance-free unit is quick and easy. The transmission and measurement cycles can be adjusted as needed. The IOTSU® AQ Combo uses LoRaWAN® network connectivity. The device is battery operated and there is no need for an external power supply. Battery included.
Please also notice that visualisation of data is available. For more information, please contact the manufacturer at info@smalldatagarden.fi
Dripspy leak and temp, WiFi
Elementric
Dripspy leak and temp, WiFi
Art. no.: 98390003
Elementrics leak and temperature sensor, Droppmattan, comes with external sensor cable.
Detects early leaks and sends notifications and SMS directly to your phone.
Temperature alarm that warns below °C.
Easy to install - no tools required.

The droppmattan has a built-in retry system that ensures that the device's status is reported to the server and notified in the app. The droppmattan sends status to the app in an interval of 2 hours.

Integration with the Elementrics app
Elementrics app: receive notifications, view history, share alerts with your family and monitor temperature changes.

Dimensions: 500 x 350 mm

WiFi specifications:

Maximum WiFi power: 20.5 dBm

WiFi frequency range: 2412 - 2484 MHz

Configurable via Bluetooth

Maximum Bluetooth power: 9 dBm

Power supply: 2 x AAA batteries

Voltage: 3V

Battery capacity: 2000 mAh

Estimated battery life: +4 years

Operating range: 5 – 60°C
Maximum humidity: 80%

Communication protocol: CoAP, IEEE 802.11 b/g/n
Water leak detector Wiser Zigbee
Schneider Electric
Water leak detector Wiser Zigbee
Art. no.: 1301085
Wiser water leak detector is placed on the floor in spaces with a risk of leakage such as bathroom / toilet, kitchen, laundry / utility room and basement. The detector is connected and managed via the Wiser app. You must also have a Wiser gateway, e-no. 17 240 04, to be able to monitor the detector via the app. When the detector feels that a leak is occurring, you receive a notification / alarm in the mobile phone and thus you can quickly minimize the damage from the leak in the property. The detector also emits an audible signal so that you can hear if any leakage occurs even if you do not have your mobile phone nearby. Communicates via Zigbee 3.0. IP44. Battery 3V / 2 x LR03 AAA with 5 years operating time. Dimensions: 71x67x19mm.
Water leak detector Wiser Zigbee
Energy meter DIN Pro EM
Shelly
Energy meter DIN Pro EM
Art. no.: 0900471
The Shelly Pro EM-50 is a two-channel single-phase energy data meter, which uses current transformers to measure energy data with loads up to 50A and with 99% accuracy. The device measures power, current, voltage and power factor with a resolution of one minute with real-time measurement. Shelly The Pro EM-50 also has a built-in 2A potential-free contact set, which can be used to draw an external contactor for controlling larger loads.

The Shelly Pro EM-50 can be easily set up and controlled through the Shelly Smart Control app or your preferred smart home system. Shelly devices work 100% locally and only need a local network to work. Shelly can be used alone in the Shelly Smart Control app or with more than 200 partner systems such as Google Home, Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.

The Shelly Pro EM-50 is designed for mounting on a DIN rail and is supplied including two current transformers. The device reports power measurement (W), voltage measurement (V), current measurement (A), apparent power (VA) and power factor (PF) in real time and stores the measurements for up to 60 days on the device and for 365 days when connected to the Shelly Cloud app . The device also meets the requirements of IEC 62053-21 with an accuracy corresponding to Class B (maximum 1% deviation). The Shelly Pro EM-50 also has a built-in real-time clock, so it can maintain the time and date in the event of a loss of connection to an SNTP server.

The Shelly Pro EM-50 can be connected to the Internet or the local network through LAN interface and/or 2.4 GHz WiFi. In addition, the device has built-in Bluetooth, like the rest of the Pro and Plus devices, which means it can also be used as a gateway for Shelly's Bluetooth devices.

Shelly Pro EM-50 works locally without connecting to Shelly Cloud, but it is recommended to enable this for easy data storage and increased functionality. The device can also communicate via MQTT, HTTP and WebSocket. All support TLS.
Energy meter DIN Pro EM
Gateway Wiser HUB Gen II
Schneider Electric
Gateway Wiser HUB Gen II
Art. no.: 1790043
Schneider Electric Wiser Hub 2nd Generation is the central communication interface for the Wiser smart home system. It connects Wiser devices using ZigBee technology, ensuring fast and reliable communication. The built-in WiFi connection enables the use of the Wiser app and cloud services, so you can access and control your home securely, wherever you are in the world. Power supply with AC/DC adapter and 1.8 m cable included. If you do not have a visible power supply cable, install the hub semi-flush in a wall box using the wall box power supply (accessory). Standby power consumption is 1 W. Dimensions: 123 x 103 x 24 mm. The hub supports tabletop installation as well as surface-mounted and semi-flush mounting in a wall box. The hub dimensions are (W) 123 mm x (H) 103 mm x (D) 24 mm. The operating temperature is from 0 °C up to +45 °C. The protection class is IP20 (for indoor use, touch-proof and dust-proof). Operating temperature: 0 °C to 45 °C. No matter where you are, the Wiser Home app allows you to control all connected devices in your house from your smartphone. Wiser Home is also compatible with the latest technology such as Amazon Alexa or Google Assistant. The Wiser Home app is available for Android 5.1, Apple iOS 10.3 or later.
Shelly Wall Adapter Gira/Exxact
Shelly
Shelly Wall Adapter Gira/Exxact
Art. no.: 1893164
If you have purchased the Shelly BLU Wall Switch 4 without an adapter frame and want to integrate the device into your existing installation, you need one of the following adapters depending on the type of installation material you have. The following frames are compatible with the Shelly BLU Wall Switch 4 with article number 3800235266892:

Shelly Wall Switch Adapter - Gira/Merten/Exxact: 3800235266922
Shelly Wall Switch Adapter - Legrand/Shelly: 3800235266953
Shelly Wall Switch Adapter - Busch-Jaeger: 3800235266946

Please note that for the adapter to fit the SE Exxact, you need to use the Exxact Combi Frame (WDE002801). If you want to install the control button on a wall without a back box, you can buy the device in a standalone version: Shelly BLU Wall switch 4 – stand alone: ​​3800235269626
Dimmer Gen 3 Wifi
Shelly
Dimmer Gen 3 Wifi
Art. no.: 1361139
Shelly Dimmer Gen3 is a compact WiFi-based light dimmer with power measurement that is installed behind the switch or light socket and works without a neutral conductor. Thanks to its sleek design, it fits in most wall and ceiling boxes. The device can be used as a regular light dimmer, but it can also be connected to the internet to enable smart control. Shelly Dimmer Gen3 is easily installed and controlled via the Shelly Smart Control app or any smart home or smart building system. It is compatible with over 200 partner systems, including Google Home, Amazon Alexa, Home Assistant, SmartThings, Homey, KNX and many more.

Key features
- Neutral conductor-free power supply: Requires 220-240V AC and works without a neutral conductor (at least 20W load or use of bypass required).
- Automatic dimmer calibration: Automatically finds the best dimming method.
- Adjustable brightness: Set min and max levels for brightness, dimming speed and fade effect.
- Two programmable inputs: Supports both spring-loaded push buttons and standard switches.
- Power metering: Monitor energy consumption directly in the Shelly Smart Control app.
- Timer function: Built-in timer with automatic staircase function.
- Scheduling and astro clock: Create weekly schedules or synchronize with sunrise and sunset.

Compatible load types
- Dimmable LED lamps: Up to 150 W
- Incandescent and halogen lamps: Up to 200 W
- Iron core transformers with low-voltage incandescent lamps: Up to 200 VA
- Dimmable electronic transformers: Up to 200 W
- Advanced connectivity and functionality
- The Shelly Dimmer Gen3 connects via 2.4 GHz WiFi and has built-in Bluetooth, just like the other Shelly Pro, Plus and Gen3 devices. It can also act as a gateway for Shelly's battery-powered Bluetooth devices.

With Shelly Dimmer Gen3 you get a versatile, powerful and smart lighting control solution that is both easy to install and adapt to your needs.
Relay 2PM Gen4 WiFi Zigbee
Shelly
Relay 2PM Gen4 WiFi Zigbee
Art. no.: 1302154
Shelly 2PM Gen4 is a 2-channel smart relay with power measurement that supports WiFi, Bluetooth and Zigbee communication.

Designed for mounting behind switches, wall sockets or lamp connections, Shelly 2PM Gen4 enables easy control and automation of lighting, fans, roller blinds, shutters, awnings and other two-way AC motors. Thanks to its compact design, it is easy to install in wall and ceiling boxes. The two integrated power meters allow the consumption of each channel to be measured separately, making the device ideal for controlling two lighting channels or two wall sockets. The device can be loaded with up to 10A per channel and a maximum of 16A in total.

- Matter certified: Easy integration via Matter into your favorite smart home system.

- Multi-protocol chip: Gen4 devices can communicate via 2.4 GHz WiFi and/or Zigbee. WiFi and Zigbee can be used simultaneously on different platforms.

- Bluetooth: Can be used for direct communication between Shelly relays/dimmers and battery-powered devices.
- Works locally: All primary functions work 100% locally, ensuring that devices continue to function even if the network goes down.
- High compatibility: Shelly can be integrated with over 200 partner systems such as Google Home, Apple HomeKit, Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.
- Advanced features: Support for MQTT, HTTP and WebSocket for advanced communication. All connections support TLS.

Function
Shelly 2PM Gen4 offers many applications. It can be powered by 24V DC or 110-240V AC. The device has two switch inputs that can be used optionally. It automatically measures the power consumption of each channel, which can be monitored via the Shelly Smart Control app and easily used in automations. Shelly 2PM can be used for many purposes such as:
- Control of lighting in two channels
- Control of wall sockets
- Control of shutters, blinds, awnings, garage doors and the like
Motion detector Wiser Zigbee
Schneider Electric
Motion detector Wiser Zigbee
Art. no.: 1301075
Exxact connected motion detector 10A with Zigbee control and built-in push button 10A. LED 200W, 2200W R loads, 2000W halogen 230V, electronic transformer 1050VA, 500VA conventional transformer, 1000VA motor load. Requires zero. With the Wiser app, various time management options can be selected such as programmable weekly based control, time setting and astro control. For flush mounting in device box c / c 60mm, for surface mounting, box 35mm is used. You must also have the Wiser gateway, e-no. 17 240 04, installed to be able to handle the motion detector via the Wiser app. Via the app, you have the opportunity to manage the motion detector via mobile or tablet. The settings are made via the app. Communicates via Zigbee 3.0. Supplemented with any Exxact frame.
Relay Wifi Pro Shelly Gen3 with potential-free contact set
Shelly
Relay Wifi Pro Shelly Gen3 with potential-free contact set
Art. no.: 1302003
Shelly 1 Gen3 is a WiFi-controlled 1-channel 16A relay with potential-free contact, intended for mounting behind switches, wall sockets or lamp sockets. It enables easy control and automation of lighting, garage doors, irrigation systems, bathroom fans and basically all existing electrical appliances Thanks to the compact design, it fits in most wall and ceiling boxes.

Shelly 1 Gen3 is easily configured and controlled via the Shelly Smart Control app or your preferred smart home or smart building system. Shelly devices work 100% locally and only require a local network to operate. Shelly can be used alone in the Shelly Smart Control app or with over 200 partner systems such as Google Home, Amazon Alexa, Home Assistant, Samsung SmartThings, Athom Homey and many more.

Shelly 1 Gen3 has many uses. It can be powered by 12V DC, 24-48V DC or 110-230V AC. With the potential-free contact, it is possible to operate the device with low voltage while connecting a 230V device to the relay or vice versa. The device has a simple switch input which is optional to use and which is fully programmable. This makes Shelly 1 Gen3 useful for many purposes, such as:
•Light control
•Control of bathroom fans
•Underfloor heating control
•Garage door control
•Management of irrigation systems
•SG-Ready heat pump control

All Shelly WiFi devices have a built-in web server, which means you get a wealth of features that always work. The built-in web server means that Shelly has built-in memory and therefore remembers sunrise, sunset, schedules and more, even when the network goes down. Relays and dimmers work like normal rocker relays and can therefore be used with your usual switches - even without internet. All inputs and outputs are fully programmable and only require local wifi to communicate between devices. However, we recommend having an active internet connection as it opens up even more features.
Dimmer Universal with neutral conductor
Eltako
Dimmer Universal with neutral conductor
Art. no.: 1709416
Universal dimmer puck, requires neutral lead (N), for R, C, L + ESL + LED loads. ‘Standby’ consumption only 0.6 watt. With bidirectional and amplifier functions. Lowest light level and dimming speed can be set. With light alarm clock, nursery, and sleep onset functions. Up to four light scenarios can be programmed via a push button with double rockers. Automatic electronic overload and temperature protection. The set light level is saved when turned off. With soft “On" and soft “Off," to save the load. The puck can be controlled by different transmitters. It can also be controlled with a spring-return switch. No minimum load required. Load: R = Resistive load /230V Incandescent and halogen lamps 0-300W C = Capacitive load /Electronic transformers 0-300W L = Inductive load /Conventional transformers 0-300W (max qty. 2) ESL = Dimmable low-energy lamps 0-100W LED = Dimmable 230V LED lamps 0-100W
Showing 52 of 171