Ahlsell
Order lines: 0
Quick order
AhlsellProductsElectricInstallation equipment 11-1817 17 Property automation / IoTKNX

KNX

Break switches
Dimmer actuators
Shutter actuators
Power supply
Pushbuttons
Gateway/IP router
Motion/presence detectors
Climate control
Accessories

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Products (17)
DALI Gateway Premium DG / S
ABB
DALI Gateway Premium DG / S
Art. no.: 1739866
Gatway for controlling DALI units via ABB i-bus® KNX. A DALI output for up to 64 DALI devices. DALI power supply is integrated. Control and status feedback is performed via KNX per DALI unit (64), with lighting groups (16), together in transmission or per scenes (16). DALI units type DT2 (stand-alone emergency converter according to EN 62386-202) and type DT8 (color temperature Tc / adjustable white according to EN 62386-209) are supported. Extensive error and error messages are available. Using KNX and DT2 converters, various emergency tests (eg function and duration tests) can be performed, the test results are transferred back to KNX. With DT8 units, Dim2Warm, HCL, setting and dim color temperature are possible. Slave, stair, power, block and stage functions are integrated. Status can be sent. DALI telegram frequency can be changed. For diagnostic use and individual change of DALI addresses or group assignment, a separate software tool is available. ABB I-bus Tool.
DALI Gateway Premium DG / S
Push button Dyn Sec D-life UNI
Schneider Electric
Push button Dyn Sec D-life UNI
Art. no.: 1740464
This universal pushbutton module with dynamic labeling offers maximum flexibility through the selection of several rocker button combinations. The dynamic pushbutton display allows the selection of individual icons and label texts per button and is programmed in ETS. It is possible to configure up to 16 different combinations, from 2 to a maximum of 8 pushbutton functions, which can also be easily changed over time. To save energy and increase the device's service life, the display can be switched off after a desired time. The proximity sensor activates the display when you move towards it. In addition, it is possible to have the display show the time and date as a screensaver. The dynamic pushbutton display allows the selection of individual icons and label texts per button and is programmed in ETS. Dynamic display provides the possibility of updating the Iconer and text via remote programming. Dynamic display provides the possibility of updating the Iconer and text via remote programming. Power supply 21-30VDC, at 24V 16mA is required. In standby mode, the device draws 120mW with inactive display. Maximum power consumption is 400mW. Installation in a device box. Dimensions (W) 71 mm x (H) 71 mm x (D) 31 mm and a weight of 64.6 grams. The product is black with a glossy surface and is made of site material. Enclosure class IP 20 with operating temperature between -5 °C to +45 °C. Universal module with metal support frame, supplemented with rockers and optional System Design frame Simple and safe, the user-friendly interface makes it easy to control your KNX system. Possibility of encrypted communication with the highest security.
Dimmer actuator main unit 2x350W SpaceLogic
Schneider Electric
Dimmer actuator main unit 2x350W SpaceLogic
Art. no.: 1741154
SpaceLogic KNX Dimmer Master Secure with advanced functions. Lighting control, with the possibility of advanced functions. Modular design with Master Extension concept. Achieve high component performance with KNX secure communication. The KNX dimmer enables separate control of two outputs. For dimmable LED, incandescent lamps, HV halogen, LV halogen lamps via dimmable transformers. All outputs can be operated manually on the front of the device. You can choose to use KNX Data Secure communication with the ETS or eConfigure software. Up to two extension units can be connected to the Dimmer Master module. 2 Dim extensions or 2 Relay/Jalousy extensions, the option is a combination of both. The nominal operating voltage is 110-240VAC, the frequency is 50-60Hz. Loads and power at 230V, see data sheet for lower voltage: 2 channels, 20-350W/VA with incandescent lamps, HV halogen lamps and dimmable LV halogen transformer, at 230V. The unit has 2 operating modes for inductive and capacitive loads. 2 channels 2-60VA with dimmable RL LED at 230V. 2 channels, 2-200VA for dimmable RC LED at 230V. 2 channels 2-60VA for dimmable RL LED at 230V. 4 DIN modules wide for mounting on DIN rail. Dimensions (W) 72 mm x (H) 90 mm x (D) 66 mm. The unit is white. Design IP 20 Connection bridge included with extension unit Programmable with ETS or eConfigure software. Ensure data integrity protection with KNX Data Secure functions and certification.
Switch actuator main device 8k 10/16A SpaceLogic.
Schneider Electric
Switch actuator main device 8k 10/16A SpaceLogic.
Art. no.: 1741153
SpaceLogic KNX Switch Master secure. Actuator for lighting, blinds and awnings with advanced functions. Master unit 4 modules with connection for KNX bus. Possibility of KNX Secure communication. Controls up to 4 blinds/blinds/awnings or 8 relay outputs. All outputs can be operated manually on the unit. You can choose to use KNX Data Secure communication with ETS or eConfigure software. To increase the number of channels, you can connect SpaceLogic KNX Switch/Blind extension units. Master unit and extension units are connected with a connection bridge or cable bridge of 0.3m or 1.5m respectively. A maximum of 2 extension modules can be controlled by a master unit, so it is possible to control up to a maximum of 24 relay outputs or a maximum of 12 blinds/roller blinds. The nominal current is 16A and the nominal operating voltage is 250VAC, the frequency is 50-60Hz. The motor power is 1000VA for each output. The nominal load for incandescent lamps is 2300W, for halogen lamps is 2300W, for LED 200VA, for capacitive load is 10AX with a maximum capacitance of 140µF. The relay can handle a maximum starting current of 800 A/200 μs and a maximum starting current of 165 A/20 ms for inductive load of 10 A with a power factor of 0.6. Mounting on a DIN rail. Dimensions are (W)72m x (H)90mm x (D)66mm. The product is white. IP rating is IP20. Connection bridge and cable bridge (0.3M or 1.5M) are available as accessories. Programmable with ETS or eConfigure software. Ensure data integrity protection with KNX Data Secure functions and certification.
Push button Interface Basic
Schneider Electric
Push button Interface Basic
Art. no.: 1741042
The push button interface converts the state of the physical contact into a digital signal that can be used for operations such as lighting, blinds, HVAC control, automation and maintenance, such as notifications and alarms. Configurable channels help to adapt the system to meet specific requirements. Potential-free input with a maximum cable length of 10 m. LED output max. 1.6 mA. Supports Tunable White and RGB color control. Powered via KNX bus with a nominal current of 7 mA. The device allows flush mounting with IP20. The operating temperature is from -5 °C up to +45 °C. KNX Secure compatible. KNX Secure is a security feature in the KNX standard for home and building control. Flexibility that saves installation time and provides adaptation options for future needs and changes.
Showing 17 of 17