Order lines: 0

Ahlsell Products Electric Installation equipment 11-18 17 17 Property automation / IoTRadio system

Radio system

Radio bus, Eltako

Radio bus other

Radio bus other

Ahlsell helps you find the installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. Here you will find wall sockets, cable ladders, and accessories for easy installation. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. Everything you need under one roof. Explore our wide range of lighting and accessories here in the online store or visit your nearest Ahlsell shop.

Products (30)

Built-in dimmer Nexa

Built-in dimmer Nexa

Art. no.: 1710807

Built-in dimmer 250W for fixed installation. Small and compact size with input for resilient switch (230VAC). Adjustable between front edge-controlled phase dimming and rear edge-controlled phase dimming, as well as the lowest dimmer level. The receiver needs both phase and zero and has full compatibility with other iSystem Nexa products and is Smart Mode compatible.

W-DALI wireless

W-DALI wireless

Art. no.: 1790015

W-DALI is something as simple and powerful as a wireless DALI cable, a perfect alternative to running new DALI cabling when renovating and upgrading an old installation. With W-DALI, the electrical cable does not need to be replaced, it can be reused for the new lighting. W-DALI transmits all DALI communication between luminaire and DALI controller wirelessly. Compared to running new cabling for DALI, a lot of money is saved due to reduced installation time and simplified planning. Since W-DALI transmits all DALI commands completely transparently in both directions between DALI control unit and luminaire, programming and commissioning a DALI system remains the same as with DALI cable. There is no requirement to learn a new lighting control system, everything remains as before except for the DALI wiring.

W-DALI wireless

Modbus RTU wireless Compact

Modbus RTU wireless Compact

Art. no.: 1790057

Modbus RTU Compact: Wireless Modbus RTU (RS485). For wall mounting, Swedish made.

Small format for quick installation on or in the wall
– Click mounting
– No DIP switches
– Screw terminals

For hotels, offices, shops etc. Room control, VAV units, fan coils etc.

Modbus RTU via reliable wireless mesh network. W-Modbus replaces the Modbus RTU cable with a reliable wireless mesh network – eliminating time-consuming installation planning, wiring, daisy chaining and troubleshooting. Plug-n-Play: No programming required. Enables energy savings and meets sustainability goals with wireless control. The W-Modbus product acts as a proxy for a connected Modbus RTU device, effectively extending the bus and making it possible to make wired products wireless. A W-Modbus network consists of a single W-Modbus gateway with up to 100 W-Modbus nodes.

W-Modbus is based on LumenRadio's patented mesh technology MiraMesh – which offers extremely reliable device-to-device communication, easy installation, simultaneous Bluetooth and extended range. With LumenRadio's W-Modbus solution, it is possible to create a wireless Modbus RTU system that maintains the Modbus RTU standard, while maintaining low latency.

Operating current / Impulse relay puck for box mounting

Operating current / Impulse relay puck for box mounting

Art. no.: 1709419

Receiver with different relay functions such as workflow relay for example to control push-dimmed drives, or as pulse relay for normal ignition/extinguisher and with the option of switch-off delay of 2-120min. 1 NO contact, 10A/250V AC, light bulb 2000 watt. Local operating, movement and control voltage 230VAC. In addition to the wireless input (via a built-in antenna), this puck can also be controlled locally with a conventional spring-return 230V- switch to combine wireless and wired control.

Dimmer Universal with neutral conductor

Dimmer Universal with neutral conductor

Art. no.: 1709416

Universal dimmer puck, requires neutral lead (N), for R, C, L + ESL + LED loads. ‘Standby’ consumption only 0.6 watt. With bidirectional and amplifier functions. Lowest light level and dimming speed can be set. With light alarm clock, nursery, and sleep onset functions. Up to four light scenarios can be programmed via a push button with double rockers. Automatic electronic overload and temperature protection. The set light level is saved when turned off. With soft “On" and soft “Off," to save the load. The puck can be controlled by different transmitters. It can also be controlled with a spring-return switch. No minimum load required. Load: R = Resistive load /230V Incandescent and halogen lamps 0-300W C = Capacitive load /Electronic transformers 0-300W L = Inductive load /Conventional transformers 0-300W (max qty. 2) ESL = Dimmable low-energy lamps 0-100W LED = Dimmable 230V LED lamps 0-100W

Tap-radio wireless pushbutton FT55ES, Exxact

Tap-radio wireless pushbutton FT55ES, Exxact

Art. no.: 1709014

Push button wireless Exxact gloss white battery free. Wireless and battery-free pushbutton comes with single and double rockers. With a single flip-flop, 2 signals can be evaluated. With double rocker, 4 signals can be evaluated. The button must be supplemented with an Exxact original frame

USB cable, Eltako

USB cable, Eltako

Art. no.: 1711239

USB cable 2 meters USB extension cable type A ST / BU

Mini remote control Nexa

Mini remote control Nexa

Art. no.: 1710802

Egg-shaped mini remote control with hook for, for example, keychain. Can be used to control individual receivers or receivers with Smart Mode *. Single and double click command. Works with System Nexa receivers. Transmitter On / Off, Smart Mode * function, Up to 30 meters range. * SMART MODE FUNCTION. With devices that support "Smart Mode", you can save up to 3 different favorite scenarios that are easily activated with a Nexa "Smart Mode" transmitter.

Doorbell 230V Nexa

Doorbell 230V Nexa

Art. no.: 5332084

Set with wireless doorbell in plug model that is connected to wall socket and associated push button, IP-44 classified. 6 selectable ringtones and 3 volumes and silent mode. Up to 32 pushbuttons / transmitters can be connected to one and the same doorbell and an unlimited number of doorbells to one and the same pushbutton / transmitter. Works with other self-learning remote controls, motion monitors and magnetic contacts within System Nexa.

Doorbell Battery Nexa

Doorbell Battery Nexa

Art. no.: 5332085

Set with wireless battery-powered doorbell and associated push button, IP-44 classified. 6 selectable ringtones and 3 volumes and silent mode. Up to 4 pushbuttons / transmitters can be connected to one and the same doorbell and an unlimited number of doorbells to one and the same pushbutton / transmitter. Works with other self-learning remote controls, motion monitors and magnetic contacts within System Nexa.

Plug-in dimmer Nexa

Plug-in dimmer Nexa

Art. no.: 1711372

Plug-in receiver dimmer. Adjustable between front-edge-controlled and rear-edge-controlled phase dimming, as well as the lowest dimmer level. Works with System Nexa's remote controls and transmitters. The system is self-learning, which provides a very simple and flexible installation and full compatibility with other products in System Nexa. Smart Mode compatible, Easy installation, Up to 30 meters range, Adjustable minimum dimmer level, Selectable front edge / rear edge dimming, Compatible with Nexa Bridge and Nexa Smart Hub.

Plug-in switch MYCR-2300 Nexa

Plug-in switch MYCR-2300 Nexa

Art. no.: 1711373

Plug-in receiver On / Off. Works with System Nexa's remote controls and transmitters. The system is self-learning, which provides a very simple and flexible installation and full compatibility with other products in System Nexa. Can be expanded with various transmitters such as remote controls, wall transmitters, twilight relays and motion monitors. Smart Mode compatible, Easy installation, Up to 30 meters range, Compatible with Nexa Bridge and Nexa Smart Hub.

Plug-in switch MGDR-3500 IP44 Nexa

Plug-in switch MGDR-3500 IP44 Nexa

Art. no.: 1711381

Plug-in receiver for outdoor use, IP-44 rated. Can be used to control garden lighting, car heaters, etc. The MGDR-3500 is compatible with all self-learning transmitters and remote controls in System Nexa and Nexa Bridge X.

Plug-in switch MGDR-3500 IP44 with remote Nexa

Plug-in switch MGDR-3500 IP44 with remote Nexa

Art. no.: 1711382

Set of plug-in receivers for outdoor use with associated mini remote control for keychain. The receiver is IP-44 rated and works with all self-learning transmitters and remote controls in System Nexa and Nexa Bridge X.

Built-in relay Nexa

Built-in relay Nexa

Art. no.: 1710819

Built-in receiver with relay, 2.300W, for fixed installation. Small and compact size for placement in a junction box or device box. Can be connected to existing switch with 230 VAC control. The receiver needs both phase and zero. Built-in timer for automatic switch-off after 0/1/10/60/240 minutes. Can be connected to stair and crown switches.

Indoor motion sensor Nexa

Indoor motion sensor Nexa

Art. no.: 1710812

A small and flexible motion monitor for indoor use which, when moving, sends an ON signal to the connected receiver, after the selected time interval, an OFF signal is then sent. The motion detector can be mounted easily with the included power bracket which is screwed to the base. Compatible with all self-learning receivers including Nexa's wireless doorbells. Not suitable for use with dimmer receivers. Timer function: 0.5 / 1/5/10 min, Knob for light sensitivity, Easy mounting with magnetic bracket, Small and flexible

Wall transmitter 2-channel Nexa

Wall transmitter 2-channel Nexa

Art. no.: 1710937

Wall transmitter with cover frame, 2 channels .. Support for push dimming function with MYC-250 and MWMR-251. Built-in timer function with several time intervals for automatic switch-off with Mounted with double-sided adhesive tape or with screw directly on the wall or device box.

Push button doorbell, IP44 Nexa

Push button doorbell, IP44 Nexa

Art. no.: 5332081

Push button for doorbell MLR-1922 and MLR-1923. IP-44 classified for outdoor use.

Wall transmitter 1-channel Nexa

Wall transmitter 1-channel Nexa

Art. no.: 1710936

Wall transmitter with cover frame, 1 channel. Support for push-dimming function with MYC-250 and MWMR-251. Built-in timer function with several time intervals for automatic switch-off with Mounted with double-sided adhesive tape or with screw directly on the wall or device box.

Water alarm 10 years

Water alarm 10 years

Art. no.: 9450033

Water alarm with built-in 10 year battery

Wireless Blister-pack "disconnection" BPD-ES, Eltako

Wireless Blister-pack "disconnection" BPD-ES, Eltako

Art. no.: 1710041

The blister package 'refraction' consists of a battery-free, wireless push button white FT55ES-wg (supplied without outer frame) is to be supplemented with the Schneider Exxact frame. And a breaker puck FSR61-230 V with impulse/working current relay function.

W-Modbus RTU wireless

W-Modbus RTU wireless

Art. no.: 1790009

W-Modbus replaces the Modbus RTU cable with a reliable wireless mesh network - eliminating time-consuming installation planning, cable routing, serial connection and troubleshooting. Avoiding cable routing has never been easier. With LumenRadio's technology, it is possible to create a mesh hat wirelessly Modbus RTU network where you maintain the standard of the protocol. By translating the Modbus signals to LumenRadio's MiraMesh technology, you can send the Modbus RTU signals wirelessly with low delay. We call this product W-Modbus. W-Modbus uses LumenRadio's MiraMesh , which holds multiple patents for ultra-reliable radio communications, fast deployments, and long range, MiraMesh is used in installations around the world for building automation, HVAC, lighting control, and industrial sensor networks.
A W-Modbus device can be configured both as a Gateway that can be connected to a Modbus client, or a Node that is connected to a Modbus Server. A W-Modbus network can consist of 100 nodes connected to 1 Gateway.

W-Modbus RTU wireless

Antenna 5dBi black IP65

Antenna 5dBi black IP65

Art. no.: 1790021

5dBi antenna black IP65 RP-SMA for 2.4GHz. Antenna for LumenRadio's DIN rail mounted W-Modbus and W-BACnet with RP-SMA connector. The cable is 1 meter long and the antenna can easily be mounted on the outside of the appliance and electrical cabinet to extend the range.

Wireless battery-free push button

Wireless battery-free push button

Art. no.: 1892920

Wireless and battery-free push button supplied with single and double flippers. With the single rocker, 2 signals can be evaluated. With the double rocker, 4 signals can be evaluated. The button must be supplemented with an Exxact original frame.

Gateway Nexa Bridge 3

Gateway Nexa Bridge 3

Art. no.: 1790023

SmartHome Controller. With Nexa Bridge X you get full control of your home. It is not only lighting that you can control, but also receive a warning if the fire alarm is activated or push notifications if doors or windows are opened. You can see statistics on temperature and humidity, create schedules, scenarios and automations. Nexa Bridge is compatible with System Nexa Z-Wave products (requires adapter). App for local and remote remote control available for IoS and Android.

Plugin receiver Dimmer Nexa 2

Plugin receiver Dimmer Nexa 2

Art. no.: 1361066

Smart plug, Dimmer
Plug directly into the power outlet to control lighting
Simple installation and easy to use
App control, also remotely (Wi-Fi)
Works with remote controls and sensors from System Nexa
Scheduling, timers and sunrise/sunset control
Voice control (Google Assistant)
Holiday mode, turns on and off randomly
On/off button and LED indication on the plug
Shared use, let several control the home
Two-way communication always provides current status in the app regardless of who is in control

Plugin receiver On/Off Nexa 2, IP44

Plugin receiver On/Off Nexa 2, IP44

Art. no.: 1361067

Smart plug – outdoors, on/off
Plug directly into the power outlet to control lighting and other electrical equipment
Simple installation and easy to use
App control, also remotely (Wi-Fi)
Works with remote controls and sensors from System Nexa
Scheduling, timers and sunrise/sunset control
Voice control (Google Assistant)
Holiday mode, turns on and off randomly
On/off button and LED indication on the plug
Shared use, let several control the home
Two-way communication always provides current status in the app regardless of who is in control

Built-in receiver Dimmer Nexa 2

Built-in receiver Dimmer Nexa 2

Art. no.: 1361069

Smart built-in receiver, dimmer with WiFi.
Dimmer for fixed installation with very simple installation.
App control, also remotely (Wi-Fi)
Works with remote controls and sensors from System Nexa
Scheduling, timers and sunrise/sunset control
Voice control (Google Assistant)
Holiday mode, turns on and off randomly
Shared use, let several control the home
Two-way communication always provides current status in the app regardless of who is in control

Remote control with wall holder Nexa

Remote control with wall holder Nexa

Art. no.: 1360906

Remote control compatible with all self-learning receivers in System Nexa with a practical wall holder with magnet.

Wall transmitter with frame System Nexa, Exxact

Wall transmitter with frame System Nexa, Exxact

Art. no.: 1892915

Wireless wall transmitter without cover frame, for controlling all Nexa receivers. Supplied without frame and with two sets of buttons in two different shades and is therefore fully compatible with all frames in the ELKO RS, ELKO Plus and Schneider Exxakt series. Battery: 1xCR-2032 (included).

Showing 30 of 30