Order lines: 0

Ahlsell Products Cooling Cellular rubber AF/Armaflex

AF/Armaflex

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

Products (15)

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43812089

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Art. no.: 43511408

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings
This typeis coated with glue and is applied directly to the surface without any extra glue. The surface should be cleaned with a cleaning agent meant especially for glue to achieve the best installation results.

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Art. no.: 43802008

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-4, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43804064

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cellular rubber insulation in plates AF/Armaflex, pre-glued

Cellular rubber insulation in plates AF/Armaflex, pre-glued

Art. no.: 43516000

This typeis coated with glue and is applied directly to the surface without any extra glue. But the duct and/or surface should be cleaned with a cleaning agent for glue to achieve the best installation results. Delivered with measurements 2000x500mm.

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43814060

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Art. no.: 43501408

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings

Cellular rubber insulation in plates AF/Armaflex, un glued

Cellular rubber insulation in plates AF/Armaflex, un glued

Art. no.: 43504000

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Type approval 03391/82: Outer layer class II (Fire class B-S3-D0). Tg 3176/83: Pipe bushings
Delivered with the measurements 2000x500mm

Cell Rubber Insulation AF/Armaflex AF-1, Hose 9mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-1, Hose 9mm (tolerance ± 1.0mm)

Art. no.: 43801010

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BLS3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43811054

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Art. no.: 43805028

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Art. no.: 43806015

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-1, only full roll, with increasing insulation thickness

Cell Rubber Insulation AF/Armaflex AF-1, only full roll, with increasing insulation thickness

Art. no.: 43821028

Insulation for pipes in cooling and climate control systems, as well as for installations where saving energy and preventing condensation is required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings

Cell Rubber Insulation AF/Armaflex AF-2, only full roll, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, only full roll, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43822022

Insulation for pipes in cooling and climate control systems, as well as for installations where saving energy and preventing condensation is required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings

AF/ Armaflex 99/E Cellular Rubber Insulation, Stripes

AF/ Armaflex 99/E Cellular Rubber Insulation, Stripes

Art. no.: 43523050

Pre-cut insulation band coated with glue and made of AF Armaflex material For insulation at crossovers and joints on ventilation ducts and similar things

Showing 15 of 15