Order lines: 0

AhlsellProducts

Ahlsell

Heating and Sanitation

Technical insulation

Building Sheet Metal

Tools & Machines

Construction range

Personal protection

Storage & Handling

Garden & Lesiure

Appliances & Consumer electronics

Products (41410)

Multi-sheet Heavy Duty 9 parts

Multi-sheet Heavy Duty 9 parts

Art. no.: 469223

Q235+Diamond
- 77.5mm triangle diamond blade
(200687)
- #65mm circle diamond
(200337)
65Mn
- 52mm scraper (200336)
- 51.5 flat scraper (200955)
SKS51
- 10mm cutting blade for wood
(200956)
- 33 mm curved cutting blade for
wood and plastic (200958)
- 34mm cutting blade for wood
(200329)
- 34mm cutting blade for wood
with big teeth (200331)
- #87x0.6mm circle blade for
wood (200689)

Mini Turbo Hand Fan Ironside

Mini Turbo Hand Fan Ironside

Art. no.: 80599474

Blow or suck away dirt and dust easily and smoothly with an airflow of up to 117,000 RPM, equivalent to 27.5 m/s. Weighs only 300g and is smaller than a smartphone. Increase the airflow with the turbo button.
Powerful airflow: Up to 117,000 RPM and wind speeds over 27.5 m/s. Easy control with integrated design for smooth transition between power modes.
Turbo boost: Instant increase in airflow by 30% by pressing the turbo button. Perfect for quick inflation and pressurization.
Ideal for outdoor activities and various tasks such as inflating/deflating air cushions, dust blowing, snow blowing, car cleaning, quick drying, and workshop cleaning. Equipped with 3 types of inflation heads for different needs.

Material: Aluminum alloy/PC+ABS
Battery capacity: 110mAh
Charging time: Approximately 2 hours and 15 minutes
Max. operating time: Approximately 3 hours and 30 minutes
Max. speed: 117,000±10% rpm

Generator Ironside 2200W

Generator Ironside 2200W

Art. no.: 539545

Impact Wrench Milwaukee M18 FMTIW2F12-0X SOLO

Impact Wrench Milwaukee M18 FMTIW2F12-0X SOLO

Art. no.: 730822

M18 FUEL™ ½" intermediate impact wrench with friction ring. Industry-leading performance with up to 881 Nm loosening torque and up to 745 Nm tightening torque. Only 152 mm total length. 4-mode DRIVE CONTROL incl. Auto shut-off only tightens to 34Nm to prevent overtightening, as well as bolt release mode, where the machine automatically reduces speed after loosening, to avoid lost nuts. Three LED lights illuminate the work area. Delivered without battery and charger in stackable HD box.

Trousers Snickers 6902 FlexiWork

Snickers Workwear

Trousers Snickers 6902 FlexiWork

Art. no.: 496594

Super light work trousers with top-tech, body-mapped design which combines ventilated stretch material with Cordura® reinforcements and holster pockets for outstanding freedom of mobility and functionality. Top-technology body-mapped design with super light, ventilated stretch material and shaped legs for optimal comfort and freedom of motion. The advanced KneeGuard positioning system with extra stretch material above the knees maintains the knee protection in place for superior protection and comfort. Durable Cordura® reinforcements in the knees, leg openings and pockets for extra durability. Easy access holster pockets with zip seals, a diagonal leg pocket, mobile phone pocket and detachable ID card holder. Durable, integrated and detachable belt with easy-to-open, durable buckle for maximum comfort and fit at the waist. Standard: EN 14404

Trousers Snickers 6902 FlexiWork

Trousers Snickers 6902 FlexiWork

Vacuum cleaner Nilfisk Aero 26-21 PC

Vacuum cleaner Nilfisk Aero 26-21 PC

Art. no.: 554328

AERO 26 is the featuring model of the AERO series with high focus on application and end-user needs. Push&Clean filter cleaning system and exhaust air blow function is found on all models together with flexible and convenient accessory storage. The 25 liter machine has efficient suction performance and is available with optional cable rewind system. Power socket with AutoOnOff is found on (-21) models, which activates the machine by the connected drilling, sanding or cutting tool. The AERO 26 offers great help keeping both air and surroundings clean and reducing the overall sound level.
Being compact, light-weight and robust, the AERO wet and dry vacuum cleaner can easily be transported to any location, e.g. by car. After finishing your job, the container can nice and easily be emptied - either by dispose the standard fleece filter bag or tipping the container by the lifting handle. The Push&Clean filter cleaning system prevents loss of performance and increase productivity during the cleaning task. An innovative storage solution makes it easy to place suction hose, nozzles and power cord in several positions and the built-in 2-points tube parking makes operation easy and flexible.
AERO 26 is also available with L-class certification with extra suction power and safety features, practical tool compartment and variable speed control - the perfect choice for professionals working with power tools.
AERO 26 is compact and easy to use - the ideal choice for smaller cleaning jobs in workshops or at customer sites. It is a light-weight and robust machine for workers within industry, automotive and building & construction featuring ergonomic design, semi-automatic filter cleaning and convenient storage.

Vacuum cleaner Nilfisk Aero 26-21 PC

Combi Kit Makita DLX5032T

Combi Kit Makita DLX5032T

Art. no.: 504232

Cordless 18V brushless combi kit. Drill driver DDF484Z, combi hammer DHR242Z, reciprocating saw DJR187Z, circular saw DHS680Z and impact driver DTD153Z. Supplied with 3 pcs 5,0 Ah batteries, DC18RC quick charger and bag with wheels.

Combi Kit Makita DLX5032T

Headlight Ironside Hybrid rechargeable

Headlight Ironside Hybrid rechargeable

Art. no.: 899655

Focusable headlamp with an adjustable lamp head.
A motion sensor activated via a sensor button allows the headlamp to be switched on or off with a hand movement in front of the lamp — perfect, for example, when working with gloves.
Three light modes plus red light. Maximum 660 lumens.
The light is focused using the lens ring.
Switch‑off with a single button press regardless of light mode (after being active for more than 5 seconds).
Compatible with standard AAA batteries (not included).
LED indicator: red light/charging, green light/fully charged.

Delivered with a removable elastic headband, helmet mount, 3M Dual‑Lock hook‑and‑loop fastener, rechargeable battery, and USB‑C cable.

Lamp head colour: Dark grey metallic
Light source: Gen 2 high‑power white LED with focus control
Rechargeable battery (included): 1× 3.7V 1000mAh Li‑polymer
Runtime: 660 lm / 3 h, 325 lm / 7.5 h, 25 lm / 29 h, Red LED 5 lm / 25 h
Beam distance: 660 lm / 179 m, 325 lm / 126 m, 25 lm / 37 m, Red LED / 4 m
Charging time: 2.5 h
Dimensions: 77 × 47 × 49 mm

Headlight Ironside Hybrid rechargeable

Drill set Ironside A095-200

Drill set Ironside A095-200

Art. no.: 56112557

Set with 25 drill bits 1–13 × 0.5 mm.
HSS universal drill bits for handheld or stationary drilling. DIN 338. Straight cylindrical shank. Split point for improved centering. TiN‑coated tip. Drilling capacity up to 4× the diameter.
Primarily intended for drilling in steel, cast steel, and cast iron, and secondarily in stainless steel, non‑ferrous metals, and high‑temperature alloys.

Drill set Ironside A095-200

Inspection light Ironside Slim

Inspection light Ironside Slim

Art. no.: 100265

Robust, articulated, and bright rechargeable LED lamp with a slim aluminum lamp housing. Aluminum grip equipped with a clip. Base plate with a strong magnet. Adjustable work light in four modes; maximum 160 lm, as well as UV light and top light. LED indicator shows battery level.

Comes with a 1m type C USB charger.

Adjustable lamp head; vertically 180° and horizontally 270°.

COB work light and top light 650K, 80+CRI, and 395nm UV-LED with 630mW.

Operating temperature: -10° - +40°

Work light runtime: 200 lm/16 h, 400 lm/10 h, 800 lm/5 h, 160 lm/3 h

Top light runtime: 120 lm/16 h

Rechargeable built-in battery: 3.65 V 500mAh Li-ion 21700. Charging time: 3 hours.

For UV light, hold the light button for 1.5 seconds in the off position. The UV light automatically turns off after 5 minutes.

Shower screen Door Straight Skoga with hole handle, Svedbergs

Shower screen Door Straight Skoga with hole handle, Svedbergs

Art. no.: 7271501

Shower door Straight Skoga Hole handle Matt alu/clear.

Shower screen Door Straight Skoga with hole handle, Svedbergs

Screwdriver set Ironside Slim

Screwdriver set Ironside Slim

Art. no.: 550470

Set of 7 chisels. Slim, ergonomically designed soft grip in three-component material with roll stop and model marking on top and suspension hole. The cushioning in the grip provides increased power transmission and reduced strain on the hand and joints. Contents: Tracks 2.5/3.0/4.0/5.5, PH1/PH2, PZ2.

Screwdriver set Ironside Slim

Turbo Hand Fan Ironside Heavy Duty

Turbo Hand Fan Ironside Heavy Duty

Art. no.: 80599476

Blow or vacuum away dirt and dust easily and efficiently with an airflow of up to 85,000 RPM, corresponding to 92 m/s.

With a 24,000 mAh battery, the fan provides up to 5.5 hours of continuous use.

Multi-functional brush heads for blowing and vacuuming.

Portable design, weighing approximately 1.3 kg and about the size of a water bottle, making it easy to carry.

Made from aircraft‑grade aluminum alloy for long-lasting durability.

Compact and portable, offering dual functions for blowing and vacuuming, making your outdoor activities even more enjoyable! Equipped with 3 types of inflation nozzles, suitable for a wide range of products:
Dust blower
Snow blower
Car cleaning
Quick drying
Workshop cleaning

Specifications:
Material: Aluminum alloy / PC + ABS
Battery capacity: 24,000 mAh
Charging time: Approx. 2 hours
Maximum operating time: Approx. 5 hours 50 minutes
Maximum rotation speed: 85,000 ±10% rpm (reference value) / 92 m/s

Line Laser Ironside Compact

Line Laser Ironside Compact

Art. no.: 79540554

This line laser offers exceptional precision and versatility for all your measurement needs. With a range of up to 30 meters without a detector and 60 meters with a detector, you can easily measure distances in various environments. The high accuracy of ±.2 mm/m (±.0002 in/in) ensures accurate results every time.

Self-leveling range: ±3° for easy and quick setup.
Laser line width: 2 mm ±.5 mm at 5 meters (.10" ±.02" at 20’).
Horizontal lines: Bottom line is 14 mm from the floor.
Wavelength: 510-530 nm - Laser class II for safe use.

Powered by 2x18650 batteries or via USB-C charger.
Battery life: Up to 8 hours of continuous operation.
Charging time: Only 3 hours for direct charging.

Operating temperature: -10° C to +40° C.
Storage temperature: -15° C to +50° C.
Water and dust protection: IP54 rated for robust use in various environments.

Dimensions: 106 mm x 106 mm x 70 mm.
Weight (including batteries): 490 g ± 10 g.

Groundwater pump automatic with level float Unilift KP, Grundfos

Groundwater pump automatic with level float Unilift KP, Grundfos

Art. no.: 5885712

For lightly contaminated ground and grey water with free passage for particles up to 10 mm. Stainless steel pump and impeller with 10 m motor cable. Built-in thermal protection. Supplied with level tilt.

Groundwater pump automatic with level float Unilift KP, Grundfos

Groundwater pump automatic with level float Unilift KP, Grundfos

Cut Resistant Glove Ansell HyFlex 11-531

Cut Resistant Glove Ansell HyFlex 11-531

Art. no.: 414995

MaxiFlex Cut is constructed as an ultra-light, ventilated cut protection glove with dots in inner hand that provide optimal fingertip feeling and comfort while protecting the user from cut injuries. The glove is specially suited for work with pipes and sheeting, metal, glass, cable wiring, handling small components, logistics and warehouse work and for elevator assemblers. A reinforcement between the thumb and index finger improves the cut protection and extends the gloves’ service life.
Standard: Cat 2: EN388:2016 4542C

Diamond Grinding Disc Ironside Hard Materials

Diamond Grinding Disc Ironside Hard Materials

Art. no.: 50616995

For hard materials. For grinding concrete and stone. The T-segment configuration places more diamond on the working surface. Wet and dry grinding. Suitable for machines with extraction.

Assembly Glove Activewear MO1126B

Assembly Glove Activewear MO1126B

Art. no.: 285284

Extra flexible wear-resistant goatskin glove. For installation work and other tasks that set extremely high demands on flexibility and finger feeling.
Standard: Cat 2: EN420:2003+A1:2009, EN388 2016: 2121X

Assembly Glove Activewear MO1126B

Floor drain Brage with ABS plastic, with bottom outlet, Purus

Floor drain Brage with ABS plastic, with bottom outlet, Purus

Art. no.: 7113930

With strainer, compression ring, and removable plastic water trap insert.

Floor drain Brage with ABS plastic, with bottom outlet, Purus

Floor drain Brage with ABS plastic, with bottom outlet, Purus

Winter Glove Hestra 7002330

Winter Glove Hestra 7002330

Art. no.: 889641

Flexible work glove with a CZone membrane that makes it waterproof while also ventilating moisture. Made from durable synthetic leather that provides excellent grip on tools and other items. The glove has a pre-curved fit and is lightly lined with brushed polyester – perfect for digging and road work, carpentry, park/garden maintenance, and other outdoor work in wet and moderately cold weather. Flexible and waterproof work glove for wet and moderately cold days. A versatile model with durable, grip-friendly synthetic leather on the palm, while the back is made of wind- and waterproof 3-layer fabric. A CZone membrane ensures the glove does not absorb moisture, while allowing moisture to be ventilated from the inside.

The fit is ergonomic with pre-curved fingers that provide a natural grip on tools and other items. High-visibility fabric and reflective details provide visibility during the dark hours of the day, and a hanging loop allows you to attach the glove with a carabiner to a belt loop or similar. A medium-high open cuff with a drawstring makes the glove easy to put on.

Diamond Disc Ironside Betong

Diamond Disc Ironside Betong

Art. no.: 50616993

Diamond Disc Ironside Betong

Diamond Disc Ironside Betong

Angle Headlamp Ironside mini

Angle Headlamp Ironside mini

Art. no.: 100264

Small and convenient rechargeable angle lamp with a clip and a magnet in the base. The lamp can be used both as a headlamp and as a pocket/work lamp. 4 light functions. Headband with a rubberized interior. Delivered including a rechargeable battery 1x3.6V 850mAh Li-ion and USB type C charging cable. Charging time 2.5 hours. Also compatible with CR123 battery with lower capacity (max 200 lm). Safety feature: Hold the light button for 1 second to turn on the lamp.

Industrial Vacuum Cleaner PELA 80 l, 3 motors

Industrial Vacuum Cleaner PELA 80 l, 3 motors

Art. no.: 66540692

Industrial vacuum cleaner for both wet and dry vacuuming. High suction power thanks to its 3 motors of 1000W each. Large 80-liter container made of stainless steel. Equipped with a float that shuts off the vacuum cleaner at maximum water level. Easy water drainage via a drain hose. A 13 amp fuse is required when running all motors.
Accessories: Hose, short hose connection, long hose connection, wet nozzle, dry nozzle, crevice nozzle, brush nozzle, metal tube.
Parts of the wet/dry vacuum cleaner: Nozzle, metal tube, hose, hose connection, power switch, upper part, locking device, lower part, wheels.

Flap Discs Angle Ironside

Flap Discs Angle Ironside

Art. no.: 555015

Angled Flap Disc: These abrasive discs feature flaps made from abrasive cloth folded upwards at a 90-degree angle along the base edge. The shape along the edge of the disc allows optimal adjustment of the tool to the workpiece geometry, thereby achieving better grinding effects in hard-to-reach places. Ceramic abrasive grains enable aggressive and high-quality grinding, along with improved dimensional stability and extended tool life. The angled discs of the flap disc also provide optimal grinding for fillet welds and can be adapted to weld geometry. Continuous self-sharpening of the precision-shaped abrasive grains ensures high material removal throughout the grinding process.

Flap Discs Angle Ironside

Drill Driver Panasonic EY7451PN2G32

Drill Driver Panasonic EY7451PN2G32

Art. no.: 507033

18V Li-ion drill/driver. 18-position torque control for optimal precision when tightening screws. Intelligent power switch. Steel belt clip. Multi charger for use with 18V, 14.4V and Li-ion batteries. 13 mm keyless chuck. Electronic speed control. Electric brake. LED Light. Supplied with 2 pcs 3.0 Ah Li-Ion batteries with charge indicator and belt clip.

Drill Driver Panasonic EY7451PN2G32

Welding helmet Speedglass 3M G5-03 E

Welding helmet Speedglass 3M G5-03 E

Art. no.: 77691140

18V Xr 2 Kit Dewalt DCK2051P2T-QW DCD800,DCF850

18V Xr 2 Kit Dewalt DCK2051P2T-QW DCD800,DCF850

Art. no.: 76005354

Combi Kit Bosch 18V GSR/GEX/GOP/GKS/GST

Combi Kit Bosch 18V GSR/GEX/GOP/GKS/GST

Art. no.: 83445688

Cordless combo kit with Drill Driver GSR 18V-65, Combi Driver GDX 18V-285, Circular Saw GKS 18V-57-2, Multi-Tool GOP 18V-34, and Jigsaw GST 18V-125 S. Delivered with two 5. Ah batteries, a fast charger, and a large tool bag.

Intro 55 lower washbasin cabinet, Svedbergs

Intro 55 lower washbasin cabinet, Svedbergs

Art. no.: 8847793

Dresser with soft-closing doors and internal shelf. Made of galvanized sheet metal treated with a zinc/iron alloy. Powder coated for good scratch resistance and excellent corrosion protection. Washbasin and mixer not included.

Intro 55 lower washbasin cabinet, Svedbergs

Intro 55 lower washbasin cabinet, Svedbergs

Intro 55 lower washbasin cabinet, Svedbergs

Compressor PELA 3 hp 50 liters

Compressor PELA 3 hp 50 liters

Art. no.: 35480057

Combo Kit Milwaukee M18 FPP5AB-523B

Combo Kit Milwaukee M18 FPP5AB-523B

Art. no.: 81978311

MILWAUKEE® PowerPack M18 FPP5AB-523B: M18 BLDDRC – compact brushless drill driver, M18 BLIDRC – compact brushless impact driver, M18 FCS552 – FUEL™ circular saw, M18 FBJS – FUEL™ jigsaw, M18 FMT – FUEL™ multi-tool. Supplied with 1 x 2. Ah battery, 2 x 5. Ah REDLITHIUM™ batteries, 59 min. M12-18FC rapid charger in a box.

Hand Cleanser Swarfega EXTREME

Hand Cleanser Swarfega EXTREME

Art. no.: 81367541

The Extreme hand cleaner for heavy dirt is formulated with granules, without abrasives and surfactants, for effective cleaning of deeply ingrained dirt that is difficult to remove, such as oil, grease, tar, ink, bitumen, multiple adhesives, and most oil-based paints. It is solvent-free and has an orange fragrance. It leaves hands feeling clean and fresh after use. Suitable for all workers whose hands come into contact with deep-seated heavy dirt.

Instructions for use:
- Apply to dry hands and rub thoroughly to dissolve all dirt.
- Rinse afterwards.

Hand Cleanser Swarfega EXTREME

Hand Cleanser Swarfega EXTREME

Floor wells with side outlet PS75 FLEX, Jafo

Floor wells with side outlet PS75 FLEX, Jafo

Art. no.: 7110787

Floor well for installation in concrete joists.
PS 75 FLEX has an integrated height-adjustable floor well flange for optimal height adjustment with 15 mm and is tiltable 4° when pouring.
The floor well is supplied with a pocket water lock that can be easily cleaned or replaced if necessary. ATTENTION! JAFO's plastic floor drains are available both with and without mat packages. Floor wells without a carpet package are supplemented with an upper part intended for plastic or tiled floors.

Floor wells with side outlet PS75 FLEX, Jafo

Optical fire alarm, a-collection

Optical fire alarm, a-collection

Art. no.: 6302000

Optical fire alarm with test button and diode indicating function with 1 flash/min. Approved according to EN 14604:2005 + AC: 2008, with a sound pressure of 85dbm. The battery safety feature ensures that the fire detector can not be mounted on its mounting plate unless the battery is in place. Optical fire detectors have an advanced photocell system that detects smoke particles. The optical fire detector is best with regard to detecting smouldering fires with visible smoke particles. Supplied with 1 year battery, mounting plate, screw, plug and operating instructions.

Mirror cabinet Intro 55, Svedbergs

Mirror cabinet Intro 55, Svedbergs

Art. no.: 8946503

Intro mirror cabinet 55x70x15 sand with 2 shelves and 2 doors.

Mirror cabinet Intro 55, Svedbergs

Mirror cabinet Intro 55, Svedbergs

Electricians hammer hultafors

Electricians hammer hultafors

Art. no.: 253301

Head with U-shaped striking surface - makes it possible to nail close to roofs and corners, also reduces the risk of striking marks on surrounding surfaces. Straight claws to increase accessibility when removing nails and cable staples close to roofs and in corners. Ergonomic handle.

Electricians hammer hultafors

Safety Glasses Activewear 4150 Slim

Safety Glasses Activewear 4150 Slim

Art. no.: 798874

So light that you hardly notice you're wearing safety glasses. These are Activewear's new safety glasses, SLIM. Weighing only 16.7 grams, they offer comfort and safety all day long. Both anti-fog and anti-scratch properties. Super thin and flexible temples. Perfect for use with earmuffs. The safety glasses are also metal-free.

PRODUCT DESCRIPTION
• Thin lens and nose bridge ensure they don't press against the nose bridge
• Thin temples and tight fit for increased comfort and protection when combined with earmuffs.
• AS/AF = scratch and fog-protected lens.
• UV protection
• Unisex
• Low weight of 16.7 grams

Complies with 2C-1.2 AW 1 FT CE, EN 166, class. Gray lens complies with 5-3.1 AW 1 FT CE EN166, EN 172.

Safety Glasses Activewear 4150 Slim

Mounting Glove Maxiflex Ultimate 42-874 Adapt

Mounting Glove Maxiflex Ultimate 42-874 Adapt

Art. no.: 465040

Flexible, finger-dipped synthetic assembly glove. Seamless for optimal fit. Patented microfoam nitrile coating results in a well-ventilated glove. Now with Adapt feature for even better breathability. Skin-friendly (dermatologically tested).

Pilot Drill Lenox step tip

Pilot Drill Lenox step tip

Art. no.: 79684470

Lenox pilot drill with step function for hole saw. Suitable for wood and metal. The step technology reduces the risk of breaking the pilot drill and facilitates a smoother entry into the material. The drill tip design ensures the hole is precise and accurately positioned. Universal compatibility, fits Lenox Quick Change hole saw holders as well as traditional holders. Excludes hole saw holder systems that do not use standard 1/4" shank pilot drills.

Pilot Drill Lenox step tip

Penlight Ironside Rechargeable 360°

Penlight Ironside Rechargeable 360°

Art. no.: 562736

Rechargeable LED lamp in black ABS plastic. Magnetic 360° articulated foot and clips with strong magnet. 2W work light and 1W top lighting. Burning time: 220lm / 2.5h and 80lm / 5.5h respectively. Brightness: Max 220 Lumen, top 80 Lumen. Light source: SMD LED. Charging time: 3h. LED indicator shows charge status. Working temperature: -10 ° - + 40 °. Supplied including fixed rechargeable 3.7V 1100 mAh Li-Ion battery and 1 m micro USB charging cable.

Drill Driver Panasonic EY7441LH

Drill Driver Panasonic EY7441LH

Art. no.: 773746

14.4 V Drill driver for professional use with the latest battery technology. IP56 classification against dust & water, the Panasonic IP Tough Tool series easily withstands a heavy downpour. LED lighting and belt hook make use pleasant. Low weight. A 14.4 Volt machine that does the job as well as an 18 V machine. Supplied with 2 batteries 4.0 Ah and charger.

Recip Ngcr

Art. no.: 499403

Industrial floor fan Ironside 41 cm

Industrial floor fan Ironside 41 cm

Art. no.: 85276984

Compact industrial fan for workshops, construction sites, and industrial environments where directed air circulation is required. Equipped with aluminum blades and a direct‑drive motor for reliable and consistent operation during continuous use.
The fan has three speed settings and a rotational speed of up to 1300 rpm, providing an airflow of 519 L/s and an air velocity of 5.5 m/s. Suitable for both ventilation and increased air exchange in warmer working environments.
A 360° tilt function allows precise direction of the airflow as needed. A sound level below 62 dB(A) makes the unit suitable for environments where personnel are present.
Stable construction without wheels, intended for placement directly on the floor or work surface. A 1.8 m power cable provides flexibility during installation.

Power Source Kemppi Minarc M 223 Auto

Power Source Kemppi Minarc M 223 Auto

Art. no.: 86397775

Power Bit Set Ironside 31 pieces

Power Bit Set Ironside 31 pieces

Art. no.: 742815

Drill Driver Panasonic EY74A2LJ

Drill Driver Panasonic EY74A2LJ

Art. no.: 421403

Compact machine body 178 mm. New powerful brushless motor. New “Speed control function". Electronic RPM regulation. Hybrid Switch New hard chuck teeth. Metal chuck. Electronic brake. Belt holder. LED light. Standard equipment: Case 2 x EY9L54B battery 18 V. EY0L82B charger. Belt hook.

Jacket snickers 9438

Snickers Workwear

Jacket snickers 9438

Art. no.: 391599

Warm, lightweight, and flexible. Micro-fleece zip-up jacket, with functional material and an advanced body-mapping design. Perfect as a warm base layer, or as a lighter second layer. Count on proper insulation where it matters most and ventilation where it is needed. Quick-drying A.I.S which breathes and counteracts odours.

Underlay Craft 1909711

Underlay Craft 1909711

Art. no.: 121250

Hole saw set Ironside Vent HM 7 parts

Hole saw set Ironside Vent HM 7 parts

Art. no.: 476361

Deep hole saw model with hard metal teeth. Kits with hole saws Ventilation HM. Size combinations adapted for different installations and work tasks. Supplied in practical aluminium case. Up to 5 times faster than a bimetallic hole saw in all non-alloy, iron and steel materials. Also useful with a centre drill with HM cutter, can also be used in stone/tile material up to a hardness of 6. Hole saw set HM: 86-102-133-168-210 mm hole saws as well as two holders and one extra centre drill.

Cross laser Ironside mini

Cross laser Ironside mini

Art. no.: 76584990

Small and agile indoor laser with a range of up to 15m. Two green laser beams horizontally/vertically. Perfect laser for, for example, tiling. Self-leveling with an accuracy of 0.4mm/m. Powered by 2 AA batteries (included)

Cross laser Ironside mini

Cross Line Laser Milwaukee CLL-C

Cross Line Laser Milwaukee CLL-C

Art. no.: 67846632

Alkaline cross line laser with a green high-intensity laser line for optimal visibility. Up to 4x brightness compared to a red laser line with a possible working range of 30 m without and 50 m with a receiver. IP 54-rated protection and transport pendulum lock for optimal durability. Integrated mount with 360° rotation. 1/4" tripod thread. 4° self-leveling range. Delivered with 4 x AA batteries and ceiling mount in a case.

Cross Line Laser Milwaukee CLL-C

Lenox Diamond Cut-Off/Grinding Disc

Lenox Diamond Cut-Off/Grinding Disc

Art. no.: 750611

MetalMax™ Type 27 cutting and grinding wheels with advanced technology, featuring an extra layer of diamonds brazed onto the upper and lower edges, providing extreme durability in cutting and increased productivity in light grinding and deburring.
MetalMax™’s stronger solid steel core greatly reduces the risk of cracks. Recommended for many types of metals, including steel, sheet metal, X™ stainless steel, rebar, cast iron, aluminium, and non‑ferrous metals.
The groundbreaking diamond technology offers exceptional durability and maximum work efficiency. The blade can make 1,000 or more cuts without needing to be replaced. This is 30 times longer life than thin traditional cutting wheels (average results for MetalMax compared to 115 x 1 mm aluminium oxide cutting wheels in 25 mm carbon steel cylinders).
Because the wheel is made with diamonds, it does not wear down. The cutting depth remains the same throughout its entire lifespan, providing better control, longer reach, and greater precision.
A stronger solid steel core significantly reduces the risk of cracks. It generates less odor and dust since the wheel does not wear like traditional cut‑off wheels. Visible sparks come only from the material being cut.

Lenox Diamond Cut-Off/Grinding Disc

Showing 52 of 41410