Order lines: 0

Ahlsell Products Cooling Cellular rubber

Cellular rubber

Armaflex Ultima

NH/Armaflex Smart

Accessories for cellular rubber insulation

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

Products (69)

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Art. no.: 43511408

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings
This typeis coated with glue and is applied directly to the surface without any extra glue. The surface should be cleaned with a cleaning agent meant especially for glue to achieve the best installation results.

Art. no.: 19058305

This type is coated with glue and is applied directly to the surface without any extra glue. But the surface should be cleaned with a cleansing agent for glue to achieve the best results in mounting.

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43812089

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Armaflex/Ultima cell rubber insulation, plates in rollers, pre-glued

Armaflex/Ultima cell rubber insulation, plates in rollers, pre-glued

Art. no.: 43862599

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Art. no.: 19059845

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Art. no.: 43204028

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Cellular rubber insulation in plates AF/Armaflex, pre-glued

Cellular rubber insulation in plates AF/Armaflex, pre-glued

Art. no.: 43516000

This typeis coated with glue and is applied directly to the surface without any extra glue. But the duct and/or surface should be cleaned with a cleaning agent for glue to achieve the best installation results. Delivered with measurements 2000x500mm.

Discs, Pre-Glued, Armasound RD 122

Discs, Pre-Glued, Armasound RD 122

Art. no.: 49920019

Open cell plates of elastomeric foam with excellent sound absorption. Effective sound absorption even in thin layers. Self-adhesive

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Art. no.: 3878557

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Art. no.: 43501408

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 19mm (tolerance ± 2.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 19mm (tolerance ± 2.5 mm)

Art. no.: 43206022

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Spacer Cups Armafix FX-2-with increasing insulation thickness

Spacer Cups Armafix FX-2-with increasing insulation thickness

Art. no.: 43704012

To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF 2 and 1.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Pipe Insulation Tubolit DG, (thermal insulation) 9mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 9mm instruction slotted

Art. no.: 45203042

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 20mm instruction slotted

Art. no.: 45206042

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Art. no.: 19065336

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Art. no.: 43802008

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Art. no.: 43871912

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Pipe Insulation SH-A, glued, (thermal insulation), Insulation thickness 11mm (tolerance±1,5 mm)

Pipe Insulation SH-A, glued, (thermal insulation), Insulation thickness 11mm (tolerance±1,5 mm)

Art. no.: 45111115

with glued slits. Made from flexible grey rubber material with closed cells. For insulation of hot and cold tap water in plumbing installations. The SH material's excellent flexibility makes installation extremely quick and easy. Designed specifically to meet the requirements for pipe insulation in sanitary and heating contexts. Not suitable for insulating pipes in cooling or air conditioning systems. Minimum temperature for use: +5°C. Maximum temperature for use: +110°C. (For plate insulation +85oC.) Fire class: BL-s3, d0 up to 45mm pipe diameter, above this CL-s3, d0. Soundproofing: approved in accordance with DIN 4109. Chemical resistance: against all building materials.

Armaflex /Ultima Hose 13mm (tolerance ± 1.5 mm)

Armaflex /Ultima Hose 13mm (tolerance ± 1.5 mm)

Art. no.: 19059660

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Art. no.: 19058247

Insulation/protection for pipes, tanks, and ventilation ducts in the marina sector, shipbuilding, computer rooms, or other areas where halogen-free materials are required in installations. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer) without halogens, chlorides, or bromides. Temperature range -50°C - +110 °C. Fire class DL-s3,d0

Cell Rubber Insulation AF/Armaflex AF-4, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43804064

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Armaflex/Ultima Glued Hose 19mm (tolerance ± 2.5 mm)

Armaflex/Ultima Glued Hose 19mm (tolerance ± 2.5 mm)

Art. no.: 43851922

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire capacity that gives very low smoke emission. For use in plumbing and cooling systems. Manufactured in accordance with EN 14304 in blue color. High vapor pass resistance µ > 7000. Good thermal insulation capacity lambda < 0.040 W/m•K, guaranteed technical quality through externally monitored values Fire class BL-s1, d0.
Temperature range –50°C - +110° . For outdoor laying, Ultima should be covered to protect from UV radiation, even indoors if required.
NOTE. All glued tubing should be taped over longitudinal slits with Armaflex Ultima tape.

Art. no.: 44600150

Insulation Tape of Cellular Rubber

Spacer bowl incl. clamp with 13 mm insulation, a-collection

Spacer bowl incl. clamp with 13 mm insulation, a-collection

Art. no.: 3856096

Spacer bowl incl. clamp with 13 mm insulation, a-collection

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Cell Rubber Insulation AF/Armaflex AF-4, Glued, with increasing insulation thickness (tolerance ± 1.5 mm)

Art. no.: 43814060

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Split clamp PCX, Armacell

Split clamp PCX, Armacell

Art. no.: 43724018

Cellular rubber insulation in plates AF/Armaflex, un glued

Cellular rubber insulation in plates AF/Armaflex, un glued

Art. no.: 43504000

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Type approval 03391/82: Outer layer class II (Fire class B-S3-D0). Tg 3176/83: Pipe bushings
Delivered with the measurements 2000x500mm

Cell Rubber Insulation AF/Armaflex AF-1, Hose 9mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-1, Hose 9mm (tolerance ± 1.0mm)

Art. no.: 43801010

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BLS3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43811054

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Art. no.: 43805028

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Armaflex/Ultima Glued Hose 13mm (tolerance ± 1.5 mm)

Armaflex/Ultima Glued Hose 13mm (tolerance ± 1.5 mm)

Art. no.: 43851315

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. In outdoor use, Ultima should be covered to protect it from UV radiation, even indoors if necessary.

Adhesive 520 for Armaflex

Adhesive 520 for Armaflex

Art. no.: 43600000

Special adhesives for the installation of all Armaflex insulation products (except UL/Armaflex & HT/Armaflex. Art no. 43600004 has a brush in the lid.
Colour: Beige
Operating temperature: -50 °C to +105 °C
Application temperature: ideally +15°C to +20°C, not below 0° C.

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Art. no.: 43806015

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Pipe Insulation Tubolit DG, (thermal insulation) 13mm instruction slotted

Pipe Insulation Tubolit DG, (thermal insulation) 13mm instruction slotted

Art. no.: 45204022

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG-A, (thermal insulation) 9mm Pre-glued

Pipe Insulation Tubolit DG-A, (thermal insulation) 9mm Pre-glued

Art. no.: 45213015

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG-A, (thermal insulation) 13mm Pre-glued

Pipe Insulation Tubolit DG-A, (thermal insulation) 13mm Pre-glued

Art. no.: 45214018

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Pipe Insulation Tubolit DG-A, (thermal insulation) 20mm Pre-glued

Pipe Insulation Tubolit DG-A, (thermal insulation) 20mm Pre-glued

Art. no.: 45216035

Pipe insulation of polyethene. Suitable for the temperature range + 5°C to + 102°C. High resistance to water and a water vapour. Protects pipes against condensation and drips. Good properties for ground installation. Pre-slotted, quick and easy to install. Physiologically neutral and rot-proof. Manufactured entirely without freons of the type CFC, HCFC or HFC. Thermal conductivity (lamda value): = 0.040 W/mk at + 40°C. Supplied in lengths of 2 metres.

Insulation Tape SH/Armaflex

Insulation Tape SH/Armaflex

Art. no.: 45100000

Self-adhesive insulating tape for SH/Armaflex.

Insulation Tape AF/Armaflex

Insulation Tape AF/Armaflex

Art. no.: 43600140

Self adhesive insulation tape made of AF rubber cell specially intended for rubber cell insulation AF type, such as thermic insulation.

Insulation Tape HT/Armaflex

Insulation Tape HT/Armaflex

Art. no.: 43600147

Self-adhesive insulating tape for cellular rubber insulation.

Insulation Tape AF Tensiontape

Insulation Tape AF Tensiontape

Art. no.: 19055560

PVC tape with protective film, specially intended for pre-glued versions of cellular rubber of type AF for sizes over 54mm.

Armaflex /Ultima Hose 9mm (tolerance ± 1.5 mm)

Armaflex /Ultima Hose 9mm (tolerance ± 1.5 mm)

Art. no.: 43840912

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Art. no.: 43841910

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Armaflex /Ultima Hose 19mm (tolerance ± 2.5 mm)

Art. no.: 43842512

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Adhesive 700 för UL/Armaflex

Adhesive 700 för UL/Armaflex

Art. no.: 43840001

Single-component special adhesive for UL/Armaflex
Colour: Blue
Operating temperature: -50 °C to +110 °C
Application temperature: ideally +15°C to +20°C, not below 0° C.

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 13 mm

Art. no.: 43871312

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 25 mm

Art. no.: 43872515

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Detergent for Adhesive

Detergent for Adhesive

Art. no.: 43600005

leaning agent for glue.

Adhesive Jug for Cell Rubber Insulation

Adhesive Jug for Cell Rubber Insulation

Art. no.: 43600100

Glue pot for glue for cell rubber insulation.

Adhesive Jug for Cell Rubber Insulation

Adhesive Jug for Cell Rubber Insulation

Cell Rubber Insulation AF/Armaflex AF-1, only full roll, with increasing insulation thickness

Cell Rubber Insulation AF/Armaflex AF-1, only full roll, with increasing insulation thickness

Art. no.: 43821028

Insulation for pipes in cooling and climate control systems, as well as for installations where saving energy and preventing condensation is required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >1000.0, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings

Cell Rubber Insulation AF/Armaflex AF-2, only full roll, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, only full roll, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43822022

Insulation for pipes in cooling and climate control systems, as well as for installations where saving energy and preventing condensation is required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Approval of type 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Tg 3176/83: Pipe bushings

AF/ Armaflex 99/E Cellular Rubber Insulation, Stripes

AF/ Armaflex 99/E Cellular Rubber Insulation, Stripes

Art. no.: 43523050

Pre-cut insulation band coated with glue and made of AF Armaflex material For insulation at crossovers and joints on ventilation ducts and similar things

Showing 52 of 69