Order lines: 0

Ahlsell ProductsCooling

Cooling

Air conditioning

Liquid cooling unit

Control & monitoring systems

Installation accessories

Pipe and duct systems

Refrigerant, oil and refrigerants & heating media

Service equipment

Solar heating & HVAC accessories

Consumer products KCC

Ready To Install package

Are you looking for refrigeration products? Among Ahlsell's cooling products are compressors, cooling units, heat exchangers, air conditioning, heat pumps, liquid cooling units, computer cooling units, control, and monitoring systems, valves, installation accessories, pipe and duct systems, refrigerant, oil, cooling and heating media, service equipment, solar heating, plumbing accessories, and pool heating. We value reliable, long-lasting products. As a result, you can count on us to provide you with only high-quality cooling products. Take a look at the entire range of refrigerators we have in-store or online at in out webshop.

Spare Parts Portable

Spare Parts Portable

Art. no.: 7146353

Spare parts Portable cooling

Spare Parts Portable

Spare Parts Portable

Spare Parts Portable

Spare Parts Portable

Spare Parts Portable

R1 Bushing NPT-NPT

R1 Bushing NPT-NPT

Art. no.: 7062440

Reducing bushingR1. External NPT x Internal NPT

Control Units ALCO EXV Accessories

Control Units ALCO EXV Accessories

Art. no.: 41003165

Accessories for overheating control SH1 & SH2

Control Units ALCO EXV Accessories

Control Units ALCO EXV Accessories

Control Units ALCO EXV Accessories

Easywipes Cleaning Wipes

Advanced Engineering

Easywipes Cleaning Wipes

Art. no.: 7032604

EasyWipes ™ are professional cleaning wipes that contain powerful yet safe cleaning agents. These practical wet wipes loosen, dissolve and absorb dirt, grease, oil, paint and tar. Used with advantage for hands, surfaces and tools. EasyWipes ™ comes in a resealable bag that retains moisture and is small enough to be easily stored in your tool bag or in the glove compartment of the car.

E1 Angle NPT-Flare

E1 Angle NPT-Flare

Art. no.: 7062600

90° angle E1. External flare x external NPT

Vacuum pump class A1 and A2L

Vacuum pump class A1 and A2L

Art. no.: 38022161

Vakuumpump Milwaukee M18 FVP5-0 SOLO

Vakuumpump Milwaukee M18 FVP5-0 SOLO

Art. no.: 70754371

CO2

Art. no.: 7440100

DGS sensors can be used in stand-alone or integrated systems, where continuous real-time monitoring with Danfoss ADAP-KOOL® controls and monitoring systems and / or Building Management Systems (BMS) are applied. DGS helps you meet environmental requirements for F-gas regulations and health and safety requirements for new or existing systems in: • Grocery stores • Process refrigeration systems • Cold storage and storage • Special applications / zones Measurement of the CO2 concentration is done with DGS IR which is based on infrared sensor technology Alarm limit 5000 ppm

HFC

Art. no.: 7170404

DGS sensors can be used in stand-alone or integrated systems, where continuous real-time monitoring with Danfoss ADAP-KOOL® controls and monitoring systems and / or Building Management Systems (BMS) are applied. DGS helps you meet environmental requirements for F-gas regulations and health and safety requirements for new or existing systems in: • Grocery stores • Process refrigeration systems • Cold storage and storage • Special applications / zones Measurement of the HFC concentration is done with DGS ISC which is based on semiconductor sensor technology Alarm limit 500 ppm

Hydrocarbons

Art. no.: 7170406

DGS sensors can be used in stand-alone or integrated systems, where continuous real-time monitoring with Danfoss ADAP-KOOL® controls and monitoring systems and / or Building Management Systems (BMS) are applied. DGS helps you meet environmental requirements for F-gas regulations and health and safety requirements for new or existing systems in: • Grocery stores • Process refrigeration systems • Cold storage and storage • Special applications / zones Measurement of the HFC concentration is done with DGS PE which is based on pellistor sensor technology Alarm limit 800 ppm

AK-CC 55

Art. no.: 7182100

The new AK-CC55, counter & room control provides energy savings of 6-10% compared to the second best option. It relies on the advanced Danfoss adaptive overheating algorithm to control refrigerators and cold rooms. The new ADAP-KOOL® AK-CC55 generation ensures that the system provides the same added value as always and now a much better user experience, regardless of whether you are a manufacturer, installer, service technician or food retailer. The new modern white LED-AK-UI55 screen, for example, makes it easy to read food temperatures and operating status. Connect to a wireless bluetooth connection (accessory 7182110) and make all settings via your mobile phone or tablet.

AK-PC 782A

Art. no.: 40003482

AK-PC 782A is the complete control unit for capacity control of compressors and gas coolers in a transcritical CO2 booster system with a parallel compressor. The regulation handles oil, heat recovery and CO2 gas pressure. In addition to power control, the controllers can transmit operation-related signals to other regulators, e.g. forced closure of expansion valves, alarm signals and alarm messages. The main function of the controller is to control compressors and gas cooler so that operation is always optimized. Both suction pressure and condensing pressure is controlled by signals from pressure transmitters.

Knee Tecnosystemi

Knee Tecnosystemi

Art. no.: 7818110

Top line and Eco line Tecnosystemi.
Top Line is of the highest quality and is self-extinguishing, resistant to impact UVA resistant.
Eco Line is the budget option, where the plastic quality is not as high as in Top Line. Eco Line is self-extinguishing and UVA resistant

Accessories Refrigera Ball Valves

Accessories Refrigera Ball Valves

Art. no.: 17011961

These brass hats have a small hole in them which enables sealing with the help of a steel wire.

Ball valves with Schrader - a-collection

Ball valves with Schrader - a-collection

Art. no.: 7260014

A-collection ball valves are approved for subcritical CO2 and made of a strong brass body with copper connectors and brass seal cap. All internal parts are designed to guarantee zero leakage in or out from the valve. The valve is not flow direction dependent. Leak tested with helium at its calculation pressure.
UL and CE approved.

Manometers 1/4" Flare

Manometers 1/4" Flare

Art. no.: 4234381

Silicone cushioned Class 1.6. Vertical bottom connection + front ring for wall mounting

AKS 11

Art. no.: 40009389

Plumbing and pipe sensor. Temperature range: -50° - +100°C. Casing: IP 67. Connection: PVC cable, 2 x 0.2 mm2

AKS 12

Art. no.: 40009395

Air temperature sensor with average temperature range and average time constant

VXM/VP/EC Vägg inklusive kåpa

VXM/VP/EC Vägg inklusive kåpa

Art. no.: 71117271

Embraco starting relay

Embraco starting relay

Art. no.: 1253014

Check the model in current spare parts list

Embraco Compressors for R290, Refrigerator, 230V

Embraco Compressors for R290, Refrigerator, 230V

Art. no.: 4111744

Embraco's latest developed series of compressors for combustible refrigerants, which are considered to be the best alternative to synthetic HFC media. The cooling power is specified according to EN12900 for R290 and at a condensing temperature of + 45 ° C. All compressors are supplied with the required starting equipment.

Fan Motor EC Tecumseh

Fan Motor EC Tecumseh

Art. no.: 5118772

EC fan motors for “AJ Silence" units

These motors can be recognised through the letter “N" added to their designation (CAJN & TAJN)

Reference Leak for Leak Detectors

Reference Leak for Leak Detectors

Art. no.: 7070188

Reference Leak for Leak Detectors

ECO Luvata Fan Grille

ECO Luvata Fan Grille

Art. no.: 60068300

ECO Luvata Fan Grille

ECO Luvata Fan Grille

ECO Luvata Heating Rod CTE & MTE

ECO Luvata Heating Rod CTE & MTE

Art. no.: 60069132

HP = High power
LP=Low power

ECO Luvata Heating Rod STE / DFE / LFE / ICE

ECO Luvata Heating Rod STE / DFE / LFE / ICE

Art. no.: 60069230

ECO Luvata Heating Rod EP / EVS

ECO Luvata Heating Rod EP / EVS

Art. no.: 60069103

Each heating rod is held in place by two clips.

Teflon Gasket Rotalock

Teflon Gasket Rotalock

Art. no.: 11004597

For Refrigera rotalock valves

Rotalock Valves

Rotalock Valves

Art. no.: 17022017

Including Teflon gasket. For HFC and HFO refrigerants.

Rotalock Flashing - Angle

Rotalock Flashing - Angle

Art. no.: 17022211

For HFC and HFO refrigerants

R600a - Isobutane

R600a - Isobutane

Art. no.: 20000630

Natural refrigerant with very low GWP. NOTE: Flammable

Control Valve ALCO EX4 - 8

Control Valve ALCO EX4 - 8

Art. no.: 41003010

Series EX is step-motorised valves for fine control of the mass flow in HFC and HFO system. The valves can be used as high-pressure hexagonal valve, for spraying of liquid or hot gas by-pass.
PS = 45bar
Regulation range 10 - 100%

Nominal cooling effects in kW
R407C 43°C/4°C (dew point), UK 1K
R134a, R404A and R410A 38°C/4°C, UK 1K

Control Valve ALCO EX4 - 8

Filling Stand for Propane

Filling Stand for Propane

Art. no.: 20008742

Whisper Electronic Leak Detector with Ultrasound

Whisper Electronic Leak Detector with Ultrasound

Art. no.: 22070806

Whisper is an electronic leak detector ideal for detecting and locating ultrasonic frequencies generated when the following common situations occur:
• leakage of any gas under pressure or vacuum
• electrical overload
• worn bearings
Whisperer picks up the ultrasound that arises in the event of, for example, leakage and turns it into an audible sound for the human ear in the supplied headphones. In this way it is possible to locate the leakage of whichever refrigerant or other gas at any time, for example when a conventional leak detector or leak detection spray does not work so well. Because the Whisperer only takes up ultra frequency sound it works really well, even in noisy environments. Supplied with a hard plastic bag and two “D" alkaline batteries, which can provide 165 hours of operation.

Adapter for R410A

Adapter for R410A

Art. no.: 18005075

Connection: Internal 5/16 " flare x external 1/4" schrader flare

Ground Bracket

Art. no.: 7133074

Tecumseh Operating Capacitor

Tecumseh Operating Capacitor

Art. no.: 5117000

Operation capacitor, check operating area, and voltage

Fan motor for SILENSYS SIL

Fan motor for SILENSYS SIL

Art. no.: 5118683

Power supply 230v. Use 7070341 to control the EC fan 0-10.

Embraco compressor NEK for R134a, cooling, 230V

Embraco compressor NEK for R134a, cooling, 230V

Art. no.: 4112303

230V 1-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco Compressor NEK/NT for R134a, refrigerated, single phase

Embraco Compressor NEK/NT for R134a, refrigerated, single phase

Art. no.: 4111281

230V 1-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco compressor NJ for R134a, refrigerated, single phase

Embraco compressor NJ for R134a, refrigerated, single phase

Art. no.: 4111263

230V 1-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R134a, refrigerated, three phase

Embraco compressor NJ for R134a, refrigerated, three phase

Art. no.: 4111267

400V 3-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. Delivered with a connection for Rotalock valve on the suction side.

Embraco compressor EMT for R404A, cooling, 230V

Embraco compressor EMT for R404A, cooling, 230V

Art. no.: 4112405

230V 1-phase 50Hz. Working range -20°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco compressor NEK for R404A, freezer, 230v

Embraco compressor NEK for R404A, freezer, 230v

Art. no.: 4111350

230V 1-phase 50Hz. 230V 1-phase 50Hz. Working range -40°C to -10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco compressor NT for R404A, refrigerated, single phase

Embraco compressor NT for R404A, refrigerated, single phase

Art. no.: 4111361

230V 1-phase 50Hz. Working range -20°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R404A, freezer, three phase

Embraco compressor NJ for R404A, freezer, three phase

Art. no.: 4111345

400V 3-phase 50Hz. Working range -40°C to -10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R404A, freezer, single phase

Embraco compressor NJ for R404A, freezer, single phase

Art. no.: 4111373

230V 1-phase 50Hz. Working range -40°C to -10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R407C, three phase

Embraco compressor NJ for R407C, three phase

Art. no.: 4111477

400V 3-phase 50Hz. Cooling effect is indicated for condensation + 45°C.

Embraco Start Capacitor

Embraco Start Capacitor

Art. no.: 8115204

Start condenser, checks operating area and voltage

Embraco Operating Capacitor

Embraco Operating Capacitor

Art. no.: 2253002

Operation capacitor, check operating area, and voltage

Embraco Startbox, complete

Embraco Startbox, complete

Art. no.: 1262108

Complete start box for Embraco compressors contains required Klixon, relay and capacitor connected to the connection terminal

Embraco air cooled UNEK/UNE R134a, Cooling, 230v

Embraco air cooled UNEK/UNE R134a, Cooling, 230v

Art. no.: 4111644

230V 1-phase 50Hz. Cooling effects specified in accordance with EN 13215, for ambient temperature of + 32°C, suction line temperature of + 20°C or 10K, no undercooling. Working range from -15°C to + 10°C.

Showing 52 of 974