AhlsellProductsConsumablesChemical technology and hygiene

Chemical technology and hygiene

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Products (1056)
Cold Degreaser RW Gel
GörDetMedRW
Cold Degreaser RW Gel
Art. no.: 84891490
GörDetMedRW Cold Degreaser Gel is a petroleum‑based degreaser with a new gel‑based formula that provides longer working time and better adhesion to surfaces. The gel ensures the product stays in place without drying out, resulting in more effective dissolution of dirt and a more user‑friendly application, even on vertical surfaces.

The product is designed to break down stubborn contaminants such as road salt, tar, asphalt, oil, grease, and other petroleum‑based grime. It serves as an ideal complement to alkaline degreasers during pre‑wash or for spot‑treating heavily soiled areas.

The cold degreaser is well‑suited for cleaning vehicles, machinery, undercarriages, wheels, and surfaces where petroleum‑based deposits need to be removed. It effectively eliminates tar and asphalt stains, silicone residue, fuel stains, adhesive residue, and other types of oil‑based dirt.

The product should be used undiluted and must not be mixed with water. Its gel‑based consistency makes it more effective, easier to control during application, and delivers better results when removing tougher contaminants.
Cold Degreaser RW GelCold Degreaser RW Gel
Spray-paint rust oleum
Rust Oleum
Spray-paint rust oleum
Art. no.: 297542
RUST-OLEUM® Hard Hat Aerosol top paints 2100 is based on a quick-drying, short soy oil alkyd. The products are based on lead- and chromium-free pigments. RUST-OLEUM top paints 2100 must be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or on necessary cleaned and painted foundations. RUST-OLEUM top paints 2100 is designed for minor maintenance works or for improvement painting. RUST-OLEUM top paints 2100 must be used in lighter industrial environments, normal humidity and indoor application.

Surface finish: high gloss
Colour: Optional RAL-NCS colour
Fuel: di-methyl ether
recommended dry film thickness: 25my dry, equal to 100my wet
Dust dry: 15 minutes
Operational: 30 minutes
Re-paintable: within 1 hour or in 48 hours
Full hardness: 7 days
Heat resistance: 100°C (dry heat)
Theoretical coverage: 2.5 m²/spray can with dry film thickness of 25my

The practical coverage depends on many factors such as the porosity and roughness of the foundation and the material loss during application.
Remove dirt, grease, oil, loose rust and all other pollutants from the foundation in a suitable manner.
Polish the existing colour layer, which is in good condition in order to break the gloss and get a slightly coarse surface. The surface must be clean and dry during application. Remove the protective cap. Shake energetically for at least one minute after hearing the ball. Shake continuously during use.
Hold the can at a distance of approx. 25 cm from the foundation. Move the can back and forth in parallel with the base.
Move the can continuously while spraying to avoid running. Apply several thin layers with several pauses in order to achieve sufficient thickness. Turn the can upside down after use and spray the nozzle clean for 2-3 seconds.
For optimal result, the relative air humidity must be under 85% and the temperature of the can must be above 0°C.
Clear colours can need a light coloured primer/intermediate layer.
Spray Paint Elite Spray Master
Master
Spray Paint Elite Spray Master
Art. no.: 69645048
Spray Paint Elite is a high-coverage and fast-drying acrylic paint with high performance and good adhesion for professional users in industry, workshops, and production. The paint's high pigmentation provides coverage with just one coat. If needed, build up the paint layer with several thin coats, waiting a few minutes between each layer. The product is UV-resistant and weatherproof with high hardness and good resistance to mechanical wear. The nozzle provides a fan-shaped spray pattern and can be rotated 360° for horizontal or vertical application. When repainting, it is advisable to first test that the paint dries and adheres to the surface. Dust dry within approximately 5 minutes, fully dry after approximately 60 minutes (at 20°C). The product replaces corresponding colors of Master Spray Paint/Snabblack Master.

Green Propellant product, which means that through the mass balance principle, it is ensured that the corresponding amount of propellant in the can is produced from renewable raw materials. Compared to fossil-based propellants, this results in a CO2 reduction from propellant production by 40-90%, depending on the gas.
Spray Paint Elite Spray MasterSpray Paint Elite Spray MasterSpray Paint Elite Spray MasterSpray Paint Elite Spray MasterSpray Paint Elite Spray Master
+
11
Cyanoacrylate adhesive Loctite 454
Loctite
Cyanoacrylate adhesive Loctite 454
Art. no.: 233908
Instant adhesive - universal gel. Drip-free. Ideal for use on undersides and vertical surfaces.
(Also known as Loctite 454 Prism Instant Adhesive Gel )

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. The gel consistency means that the adhesive can be applied vertically and on undersides. LOCTITE 454 is also suitable for gluing of porous materials such as wood, paper, leather, and fabric. Perfect for quick repairs.

The advantages
Universal instant adhesive
Does not drip or run
Gel consistency, especially suitable for porous and absorptive materials
Perfect for all quick repairs
Ideal for use on undersides and vertical surfaces
Bonds similar and dissimilar material combinations of wood, metal, ceramic, and most plastics
Cyanoacrylate adhesive Loctite 454
Roof sealant sika blackseal
Sika
Roof sealant sika blackseal
Art. no.: 260460
One-component, plastic, bitumen-based. Very good adhesion on most building materials without primer and will not discolour surrounding materials. See also the joints around chimneys, roof windows and more. Seals cracks and holes in roofing paper. Seals and repairs discharge water systems, for example gutters. Adheres to many types of underlay such as brickwork, concrete, wood and metal. Also suitable for different types of steel work, spigots, for sealing of the brick and concrete tiles around pipe bushings. Also excellently suitable for overlap joining of building foil. Good adhesion on asphalt and tar and can be used on damp surfaces. Can be painted with most paints that do not contain strong solvents. Application temperature +5°C to +40°C. Temperature resistance -20°C to +70°C. Hazard labelling: flammable.
Propylene Glycol EarthCare Conc m Corrosion Inhibitor
EarthCare
Propylene Glycol EarthCare Conc m Corrosion Inhibitor
Art. no.: 471375
EarthCare Monopropylene glycol is formulated on a recycled glycol, which means an environmental advantage in the form of reduction of CO 2 emissions compared to a product that is not based on recycled raw material (calculated by RISE). It is available as a concentrate to ready-mixed 30%. Assessed by both Byggvarubedömningen and Sunda Hus. EarthCare Monopropylene Glycol is compatible with most metals except zinc. The hot heat transfer fluid can dissolve zinc and should therefore not be used in galvanized pipelines. EarthCare Monopropylene Glycol has a wide range of uses and provides long-lasting protection with high performance. Added corrosion inhibitor is nitrite, amine, phosphate, borax and silicate free which makes it gentle on pipelines and pumps. EarthCare Monopropylene glycol is an uncoloured product, as paint additives are not environmentally friendly. This product is designed to be used for all real estate and process applications. Air conditioning (HVAC), cooling and heat recovery systems, geothermal and rock heating, sprinkler systems and solar panels, but can also be used in secondary cooling systems for leisure facilities such as ice rinks and solar panels. Monopropylene glycol is low toxic, which makes it suitable for use in the food industry in the above-mentioned plants. Used glycol, regardless of make, can be handed over to Recyctec at handling cost to enable continued reuse. Contact order@recyctec.se or 010-209 00 28. See symbol for product sheet for more detailed product information.
Showing 52 of 1056