Order lines: 0

Ahlsell Products Consumables Chemical technology and hygieneAdhesive

Adhesive

Construction adhesive

Technical adhesive

Hot melt adhesive

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Products (151)

Glue cyanoacrylat loctite 401

Glue cyanoacrylat loctite 401

Art. no.: 419330

Clear superglue. Very fast setting time. For porous materials such as wood, paper and cork. Also good for viewing metal, plastic and rubber. Hazard labelling: irritant. Contains cyanoacrylate.

Glue cyanoacrylat loctite 401

Glue cyanoacrylat loctite 401

Thread seal loctite 577 plumb

Thread seal loctite 577 plumb

Art. no.: 4095067

Gas, oil and plumbing sealing. Not poisonous. Does not crack. Does not shrink. Does not block up valves or pressure gauges. Resists vibrations. For town gas, LPG, plumbing installations and most liquids. Hazard labelling: irritant. Tested for 350 bar.

Glue snabbepoxy loctite 3430

Glue snabbepoxy loctite 3430

Art. no.: 4051296

Two-component adhesive that glues most materials. The small double injector automatically gives the right mixture ratios. Recommended for smaller repair work. Hazard labelling: 3430 = Component A: irritant. Contains: epoxy compound. Hazard labelling component B: irritant, environment dangerous.

Glue snabbepoxy loctite 3430

GLUE RAPID UNIVERSAL

GLUE RAPID UNIVERSAL

Art. no.: 823899

GLUE RAPID UNIVERSAL

GLUE RAPID UNIVERSAL

Adhesive Tangit for PVC plastics

Adhesive Tangit for PVC plastics

Art. no.: 3115235

Glues pipes, pipe parts, tiles and hard PVC profiles. Glue 0125 works for glueing PVC up to d50.

Adhesive Tangit for PVC plastics

Adhesive Tangit for PVC plastics

Glue casco contact 3880

Glue casco contact 3880

Art. no.: 471349

Water-based, thixotropic contact adhesive. Can be used for many types of material, for example, floor and wall carpets of PVC, cork and laminate and also for phone, leather, paper, textile, wood, metal and concrete. The underlay can be solid or porous. Registered in Basta.

Contact Adhesive

Contact Adhesive

Art. no.: 101766

Glue polyuretan dana pu421

Glue polyuretan dana pu421

Art. no.: 245738

Moisture-resistant, one-component polyurethane adhesive. Contains isocyanates. Used for glueing of wood on wood, wood on metal, hard plastic, ceramic materials, etc. particularly good on hard wood and for glueing of wood with high moisture content. Working temperature range: +15°C to + 40°C. Labelling: harmful to health. Contains isocyanates.

Glue polyuretan dana pu421

Glue polyuretan dana pu421

Glue 3M 76 spray

Glue 3M 76 spray

Art. no.: 199835

Spray glue 76 is designed for gluing mats, foam and textile materials in e.g. vehicles. Glues plastics, even polypropylene and polyethylene. Strong adhesion when applied on a surface. Temperature resistant up to 71°C. Coating ability: Approx. 3.7 m² per can. Hazard labelling: extremely flammable, environmental hazard.

Glue cyanoacrylat loctite 3090

Glue cyanoacrylat loctite 3090

Art. no.: 308249

Two-component adhesive with good gap filling up to 5 mm. All-round adhesive with drip-free formula. Allows application on vertical surfaces and ceilings. The activator provides full control over the cure time and activates product cure within defined time frames regardless of temperature, humidity, etc. Excellent adhesion on a wide variety of substrates such as metals, most plastics such as PVC, ABS, PC and PBT, rubber, porous / absorbent materials such as wood, paper, cardboard, leather and fabric. Delivered in a practical package with syringe. Precise and clean application with the static mixer that provides controlled mixing ratio. Hazard labelling: irritant.

Glue cyanoacrylat loctite 480

Glue cyanoacrylat loctite 480

Art. no.: 148942

Loctite® 480 is a tough, impact-resistant and rubber-reinforced super glue. Black. Withstands 100°C. Hazardous marking: irritating, contains cyanoacrylate.

Thread Loctite 2701

Thread Loctite 2701

Art. no.: 243532

Green, methacrylate-based thread locking adhesive with high strength and low viscosity; fluoresces under UV light for monitoring.

LOCTITE 2701 is a green, low-viscosity, methacrylate-based thread locking adhesive with high strength, specially designed for chrome-plated surfaces. Fixing time on steel, 10 minutes; on brass, 4 minutes; and on stainless steel, 25 minutes. Ideal for application where the adhesive must be prevented from migrating. Tolerates light contamination from industrial oils Suitable for all metal hangers. Fluoresces under UV light.

The advantages:
High strength, especially on chrome-plated surfaces
Low viscosity
Fluoresces to allow quality control and inspection
Prevents undesirable movement, separation, leakage, and corrosion
Vibration-resistant
Seals threads - allows cutting through threads

Thread Loctite 2701

Thread Loctite 2701

Thread Loctite 2701

Low-Temperature Glue Stick

Low-Temperature Glue Stick

Art. no.: 649032

Low-Temperature Glue Stick

Construction Adhesive PL400 Perfect

Construction Adhesive PL400 Perfect

Art. no.: 563829

Construction Adhesive PL400 Perfect

Epoxy adhesive Loxeal 4401

Epoxy adhesive Loxeal 4401

Art. no.: 73249099

Montagelim Dana Cool Track 286

Montagelim Dana Cool Track 286

Art. no.: 377287

Cool Tack 286 is a neutral moisture-cured mounting adhesive, without solvents, isocyanites or phthalates. Builds a strong and at the same time elastic seal which withstands eventual movement in the building. It is odourless, quick hardening and has very good weather resistance in different climates. It can be used both outdoors and indoors, on walls, ceilings and floors. The product hardens thanks to its Cool Cure Technology in temperatures down to -5°C. Extremely good for e.g. putting up mirrors, panels, acoustic plates, tiles, stairs, etc. Adheres to a wide choice of materials; e.g. wood, cement, bricks, metal, glass fibre, painted surfaces, etc.

Cool Tack 286 is also recommendable for roof tiles.

Montagelim Dana Cool Track 286

Glue dana contact 281

Glue dana contact 281

Art. no.: 245724

Contains solvent. Easy-flowing, thermoplastic on a polychloroprene rubber base. Used for glueing of wood, fibreboard and chipboard, plastic laminate, felt, natural and synthetic rubber, leather, concrete, glass and metals. Hazard marking: highly flammable, harmful to health, enviromentally dangerous.

Glue dana contact 281

Glue dana contact 281

Thread locking loctite 222

Thread locking loctite 222

Art. no.: 158146

Recommended for weak locking of threaded joints, especially for non-iron metals such as aluminium, brass and other copper-based metals that otherwise can break when being disassembled. Hazard labelling: irritant.

Thread locking loctite 222

Thread lock loctite 243

Thread lock loctite 243

Art. no.: 153201

Medium strong thread locking for metals including steel, brass and black oxidised screws. Prevents loosening from vibration on, for example, pumps, motors and gearboxes. Recommended when disassembly with hand tools is necessary and when the parts are slightly oily. Loctite® 243 = Hazard labelling: irritant. Max gap-filling 0.25 mm.

Thread lock loctite 243

Thread lock loctite 243

Thread lock loctite 243

Thread lock loctite 243

Cyanoacrylate adhesive Loctite 420

Cyanoacrylate adhesive Loctite 420

Art. no.: 419398

Universal capillary instant adhesive

Cyanoacrylate adhesive Loctite 431

Cyanoacrylate adhesive Loctite 431

Art. no.: 419332

A single-component instant adhesive with high viscosity. For porous materials - ceramic, wood, paper.

Cyanoacrylate adhesive Loctite 431

Quick Loctite 406

Quick Loctite 406

Art. no.: 419368

Instant adhesive primarily intended for use on plastic and rubber. Temperature-resistant. Low viscosity.

Quick Loctite 406

Spray Glue 3M Super 74F

Spray Glue 3M Super 74F

Art. no.: 377142

3M Scotch-Weld 74 foam plastic glue is a spray glue specially designed for
joining of flexible urethane or latex foam but
works also with the most common materials (wood, metal, plastic etc.) with the advantages
of a concentrated spray pattern.

The glue has quick-drying punch with the same tearing strength as the foam plastic itself.
The pattern spray provides soft joints and meticulous and economic application.

Features:
Quick-fixing for fast joining.
The same tensile strength as foam plastic.
Soft, straight glue line. Low fog formation, exact spray pattern.
Variable spray pattern width.

Spray Glue 3M Super 74F

Glue dana contact aqua 288

Glue dana contact aqua 288

Art. no.: 308263

Water-based, thermoplastic on reinforced neoprene rubber base. Thixotropic, easy to work with and has a strong “grab". Used for glueing of both porous and solid material, for example most floor and wall materials, floor and wall cork, laminates, polystyrene foam, wood, metal, cardboard, paper, textiles and some types of plastic. Operating temperature about 18-30°C. Temperature resistance -30°C to +80°C.

Thread seal loctite 577

Thread seal loctite 577

Art. no.: 4051201

For sealing of large pipe threads. Seals against low pressure directly after assembly of the parts. Replaces flax, paste and millimetre. Quick sealing against low pressure: 20% strength after 8 minutes on steel parts. Maximum sealing pressure after 24 hours over 350 bar. Maximum gap-filling 0.8 mm. Approved for drinking water NSF. Hazard labelling: irritant.

Thread seal loctite 577

Thread seal loctite 577

Glue kit incl. cleaning set, i.POWER XS, Design4Bath

Glue kit incl. cleaning set, i.POWER XS, Design4Bath

Art. no.: 4095014

i.POWER XS is an adhesive kit with high, direct mounting strength.
1K adhesive based on hybrid polymer STPU.
Very good adhesion to most substrates without the use of primer, even when exposed to water. Very high mechanical strength and elastic. For stress-compensating bonding and dynamic stresses. Neutral, odorless and fast-curing. Free from isocyanates, silicone-free, good UV resistance and good aging properties. For use both outdoors and indoors.
Certified EMICODE® EC 1 Plus.
Contains cleaning kit for optimal bonding of, among other things, bathroom products such as bathroom accessories, shower sets. Perfect for also using for other products that need to be mounted without drilling and where the priority is to obtain a fast and direct adhesion and a strong assembly.
i.POWER XS also cures under water.

Tip! When gluing between two diffusion-tight surfaces, e.g. metal to tile, the adhesive must be moistened slightly in order to be able to cure thoroughly. Use the spray which comes with our CLEANING.KIT for the purpose. Don't forget to always clean thoroughly for best results.

Hot-Melt Adhesive Karl H Ström Quick

Hot-Melt Adhesive Karl H Ström Quick

Art. no.: 57068892

Hot-Melt Adhesive Karl H Ström Quick

Hot-Melt Adhesive Karl H Ström Quick

Mounting Adhesive Sikabond 115

Mounting Adhesive Sikabond 115

Art. no.: 546525

Glue rapid epoxi dana 332

Glue rapid epoxi dana 332

Art. no.: 317971

Extra strong and durable two-component epoxy adhesive for gluing of, for example, metal, wood, glass, ceramics, leather, rubber, different types of plastic. The glue joint is water-tight and resistant to most solvents. Hazard labelling Irritant, Dangerous for environment.

Contact lim Casco 2963

Contact lim Casco 2963

Art. no.: 109735

Good resistance against water, heat and household chemicals. Does not contain toluene. Pre-testing is recommended on painted or lacquered surfaces.

Contact lim Casco 2963

Glue Stick Universal

Glue Stick Universal

Art. no.: 649028

Glue Stick Universal

Glue dana d3 430 outdoor

Glue dana d3 430 outdoor

Art. no.: 245731

Water-resistant, one-component, thermoplastic on a PVAc base. Provides colourless adhesive joints. Used where high moisture resistance is required, e. g. Laminating of furniture word and kitchen tables and interiors of wet rooms. Operating temperature +10°C - +90°C. Fulfils the demands of EN204/205, class D3. Registered in Basta.

Glue dana d3 430 outdoor

Glue dana d3 430 outdoor

Cyanoacrylate adhesive Loctite 454

Cyanoacrylate adhesive Loctite 454

Art. no.: 233908

Instant adhesive - universal gel. Drip-free. Ideal for use on undersides and vertical surfaces.
(Also known as Loctite 454 Prism Instant Adhesive Gel )

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and rubbers. The gel consistency means that the adhesive can be applied vertically and on undersides. LOCTITE 454 is also suitable for gluing of porous materials such as wood, paper, leather, and fabric. Perfect for quick repairs.

The advantages
Universal instant adhesive
Does not drip or run
Gel consistency, especially suitable for porous and absorptive materials
Perfect for all quick repairs
Ideal for use on undersides and vertical surfaces
Bonds similar and dissimilar material combinations of wood, metal, ceramic, and most plastics

Cyanoacrylate adhesive Loctite 454

Glue bostik 1782

Glue bostik 1782

Art. no.: 41601090

Bostik 1782 contact adhesive has a wide range of uses in gluing many plastics such as rigid PVC and foils of soft PVC to wooden, concrete, and other materials. The adhesive provides a transparent, light-stable bond and is very well suited for, e.g., gluing of lampshades, where the bond is visible when the lamp is lit.

Glue dana 465 winter

Glue dana 465 winter

Art. no.: 245733

Water-based, frost proof, thermoplastic on a PVAc base. Used for wood glueing indoors. Provides colourless adhesive joints. Operating temperature down to -10°C. Registered in Basta.

Glue dana 465 winter

Glue dana 465 winter

Loctite 50 ml / 250 ml Dispensing Gun

Loctite 50 ml / 250 ml Dispensing Gun

Art. no.: 756170

Glue dana contact clear

Glue dana contact clear

Art. no.: 284452

Clear contact adhesive which is free-flowing urethane-based contact adhesive for gluing of most plastic materials, especially soft PVC. 40 ml. Hazard marking: highly flammable, irritating.

Glue dana

Art. no.: 318031

Phthalate-free moisture resistant assembly adhesives. For installation and bonding of most construction materials. Bonds well to most materials. Strong, tough adhesive bond with movement uptake up to 20%. Easy to apply. White. 290 ml.

Spray Adhesive 3M Scotch-Weld™ 77

Spray Adhesive 3M Scotch-Weld™ 77

Art. no.: 100737

The glue for applications in stand construction and furniture production. Suitable for gluing of insulation materials to metal foils, plastic foils and textiles. Good even for expanded polystyrene. High coverage with low absorption capabilities. Aggressive adhesive. Temperature-resistant up to 43°C. Coating ability: Approx. 12 m² depending on the porosity of the material. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Spray Adhesive 3M Scotch-Weld™ 77

Thread sealing loctite 5400

Thread sealing loctite 5400

Art. no.: 318027

Loctite® thread sealant 5400 ACC SFDN. Strength: Medium. Operating temperature: Up to 150 degrees. Colour: yellow 50 ml.

Thread sealing loctite 5400

Flange seal loctite 5800

Flange seal loctite 5800

Art. no.: 419401

Loctite® flange sealant 5800 ACC SFDN.

Flange seal loctite 5800

Flange seal loctite 574 25ml

Flange seal loctite 574 25ml

Art. no.: 180041

Replaces cut gaskets on plane and polished surfaces. For pumps, thermostats, oil trays, valve covers, engine blocks, gearboxes, etc. Excellent chemical resistance. Max gap-filling 0.5 mm. Can be pressurised after 15 minutes. Not skin-forming. Hazard labelling: irritant.

Flange seal loctite 574 25ml

Flange seal loctite 574 25ml

Glue dana d2 490 indoor

Glue dana d2 490 indoor

Art. no.: 245728

Water-based, quick drying, thermoplastic on a PVAc base. Provides colourless adhesive joints. Used for all wood glueing indoors. Operating temperature +10°C - +70°C. Fulfils the demands of EN204/205, class D2. Registered in Basta.

Glue dana d2 490 indoor

Glue sikabond at

Glue sikabond at

Art. no.: 284405

Elastic adhesive that has good adhesion to both porous and nonporous surfaces. All-purpose adhesive for inside and outside glueing. Weather and water-resistant. Repaintable. Contains no solvents. Isocyanate-free. White colour. Registered in Basta.

Glue dana 297

Art. no.: 277914

Gipsplattelim 297Is a specially developed water-based acrylic adhesive for installing plasterboard on steel frames, wooden frames and on plaster. Used for mounting on internal walls and ceilings. Gives fast mounting, uses fewer screws and less filling work.

Glue dana 293

Art. no.: 245727

Contains solvent. Thermoplastic, synthetic rubber-based mounting adhesive and sealing agent. Thixotropic. Good adhesion even on cold and damp surfaces. Moisture, temperature and age-resistant. Used for gluing under floors, wall panels, wooden and plastic strips, stern, tiles, and more. Usage temperature -15° C to +35° C. Temperature resistance -40°C to +100°C. Fulfils AFG-01 building standard. Hazard labelling: highly flammable, irritating.

Glue pl200 tremco

Glue pl200 tremco

Art. no.: 462007

Hybrid glue elastic based on advanced SP polymer technique which hardens, using the moisture in the air, to a strong, flexible glue joint that absorbs movement. Application area: four buildings, cars, boats and caravan constructions indoors and outdoors. Excellent adhesion to wood, mirrors, glass blocks, metal, certain plastics (not fatty), firm, concrete, brick, plaster and more. Light grey.

Glue pl600 tremco wmax

Glue pl600 tremco wmax

Art. no.: 462041

Mounting adhesive that is water-based for immediate adhesion and maximal strength for installing different materials indoors. The adhesive keeps heavy material in place directly, which means that support fixing is not required. PL600 Wmax up is used indoors for glueing and installation of beams, scripts, firm, panels, fittings, ceramic tiles, shelves, decorations and more on/against wood, metal, glass fibre, plaster, brick, concrete services and more. White. Working temperature -5 to +35°C. Temperature resistance: -20° to +70°. Storage time 12 months frost-free. Open time 15 min.

Glue sikabond 500

Glue sikabond 500

Art. no.: 175843

One-component, fast hardening, yellow beige. Based on synthetic rubber and artificial resins. Very good adhesion ability even on damp and cold surfaces. The adhesive joint is elastic and has high durability. Water and age-resistant. For glueing most materials. Not for gluing foam. For use indoors and outdoors. Working temperature -5°C - +25°C. Hazard marking: highly flammable, harmful to health.

Glue rapid dana 335

Glue rapid dana 335

Art. no.: 317972

Fast hardening transparent two-component epoxy adhesive for gluing of metal, wood, glass, ceramics, leather, rubber, different types of plastic. After hardening, the adhesive resembles metal and can be sanded and repainted. 24 ml. Hazard labelling Irritant, Dangerous for environment.

Glue rapid dana 335

Glue dana 351 5gram

Glue dana 351 5gram

Art. no.: 471213

Super glue for materials such as wood, rubber, textiles, metal, leather and more. Transparent. 1-component fast hardening cyano acrylic adhesive.

Glue super attak loctite

Glue super attak loctite

Art. no.: 471126

Liquid, all-round super glue based on alkyl cyanoacrylate. Suitable for porcelain, wood, leather, metal, rubber, cardboard and most plastics. Adheres in seconds. Hazard labelling; irritating.

Glue super attak loctite

Showing 52 of 151