Order lines: 0

Ahlsell Products Consumables Chemical technology and hygieneSealants and jointing compounds - filler

Fog- och tätmassor - spackel

Sealants and jointing compounds

Cold asphalt and roof seal

Industrial and technology seal

Filler and repair materials

Leak sealing medium for heating systems

Fire Seals system Fireseal

Fire Seals system Protega

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Products (208)

Falskitt AA Sunchem

Falskitt AA Sunchem

Art. no.: 19050816

Fire protection kit fs-flex

Fire protection kit fs-flex

Art. no.: 1480433

Kit for sealing medium-sized openings (5 dm²) for cables, ladders, pipes and ventilation ducts. The kit contains 2 tubes of FSS-3000, aluminium silicate wool for insulation. 1 putty knife and instructions for use. Fire-classification 60 is achieved if an insulation material is installed to a filled depth of 100 mm and thereafter a sealing compound is applied to a thickness of 12 mm.

Fire Sealant Nullifire Acrylic FS702

Fire Sealant Nullifire Acrylic FS702

Art. no.: 706184

Fire Sealant Nullifire Acrylic FS702

Glue t4000 gluespec

Glue t4000 gluespec

Art. no.: 292628

Flange & thread sealant T4000 is a solvent-free anaerobic (hardens in the absence of oxygen) sealing compound which provides a quick and leak-proof sealing that replaces glue, Teflon tape and conventional gaskets. T4000 is thixotropic (does not run) and can therefore be applied to vertical surfaces. T4000 is used for threads, tubes, plugs and flanges. T4000 is after hardening removable and resistant to fuel, oil, coolant and solvents. Have a gap of 0.5 m/m and can be used on the threads from ½ ", and upwards. Hazard labelling; irritating.

Caulk Dana 514 Silikon Danaseal Sanitary & Build

Caulk Dana 514 Silikon Danaseal Sanitary & Build

Art. no.: 535116

Caulk Dana 514 Silikon Danaseal Sanitary & Build

Caulk Dana 514 Silikon Danaseal Sanitary & Build

Sealants sikasil-c

Sealants sikasil-c

Art. no.: 253059

Highly elastic building and sanitary silicon with neutral curing system. Mildewcide treated in all colours. Not repaintable. Used for sealing and joining in wet rooms and kitchens. For installation and movement joins for most building materials such as stone, steel plate, concrete, brick, area to concrete, plaster, finishing mortar, wood, tiles, ceramic tiles, plastic, steel, etc. Good ageing qualities and good UV resistance. Motion capture ± 25%. Application temperature +5°C - +40°C. Temperature resistance -40°C - + 150° C. Registered in Basta.

Sealants sikasil-c

Sealants sikasil-c

Sealants sikasil-c

Sealants sikasil-c

Sealants sikasil-c

Sealants Mass SikaSil FDA

Sealants Mass SikaSil FDA

Art. no.: 317951

Elastic silicon for seals in the food and pharmaceutical industries where there are requirements for FDA approval. The product has a vinegar based curing system where curing happens with help of air humidity. Skin growth happens after 20 minutes. Completely sets, depending on the climactic conditions and sealant depth at ca 2mm per day. The sealant can withstand movement of +-20% of the original sealant breadth Sikasil FDA withstands temperatures between -50 degrees C and 180 degrees C and can’t be painted over. 1 Component.

Sealants Mass SikaSil FDA

Fire sealant fss-3000

Fire sealant fss-3000

Art. no.: 1480425

Silicon adhesive
Silicone-based sealant in 310 ml cartridge which is applied using a cartridge gun. Intended for fire-classed joints and seals. Fire class A 60.

Fire sealant fss-3000

Fire Silicon Sikasil 670

Fire Silicon Sikasil 670

Art. no.: 462068

1-component neutral-hardening, fire retardant silicone for fire protection, suitable for indoor / outdoor use. Flameproof. Primer-free adhesion on many different surfaces. Excellent ageing resistance to UV . Odourless. Solvent-free.

Flange seal loctite 5970

Flange seal loctite 5970

Art. no.: 311562

Flange seal that replaces traditional gaskets on both metal and plastic flanges. Ideal for use in strong vibrations and when a flexible product is desired. Can be used on painted and plastic parts. Tack-free after 25 minutes. Withstands working temperatures of -60° C up to 200° C. 300ml.

Indust silicon sikasil-gasket

Indust silicon sikasil-gasket

Art. no.: 197426

Industrial silicon that is resistant to oils, water and frost protection agents. Resists repeated heating and cooling. Replaces gaskets of cork, felt, rubber and similar. Used where an elastic, vibration-proof and pressure-resistant gasket is required.

Fire tape Pipe choke Protega Novastripe

Fire tape Pipe choke Protega Novastripe

Art. no.: 690242

Novastripe is a strip made of the expanding sealing compound Novaflex. The sealing strip expands when it is exposed to high temperatures in the event of a fire and effectively seals any openings that may occur after the melting plastic pipe in the bushing. Able to seal plastic pipes up to Ø 125 mm. Delivered on a roll, 10 meters per roll. Fire technical class EI30 - EI120, see installation instructions what is required to meet different fire classes.

Roof joints Roofseal

Roof joints Roofseal

Art. no.: 419395

An elastic adhesive and sealant resin for sealing and bonding on roofs.
Everything from fixing/repair of roofing felt to sealing of the roof and the brick around the chimney. Works independent of temperature. Does not soften with heat, hardens with moisture and is solvent-free.
Outdoor use.
Hardness: Shore A 40-45
Movement capacity: 20%
Curing time: 2 mm per day
Repaintable: Yes

Roof joints Roofseal

Roof sealant sika blackseal

Roof sealant sika blackseal

Art. no.: 260460

One-component, plastic, bitumen-based. Very good adhesion on most building materials without primer and will not discolour surrounding materials. See also the joints around chimneys, roof windows and more. Seals cracks and holes in roofing paper. Seals and repairs discharge water systems, for example gutters. Adheres to many types of underlay such as brickwork, concrete, wood and metal. Also suitable for different types of steel work, spigots, for sealing of the brick and concrete tiles around pipe bushings. Also excellently suitable for overlap joining of building foil. Good adhesion on asphalt and tar and can be used on damp surfaces. Can be painted with most paints that do not contain strong solvents. Application temperature +5°C to +40°C. Temperature resistance -20°C to +70°C. Hazard labelling: flammable.

Foam Sika Boom-463 Flexibel

Foam Sika Boom-463 Flexibel

Art. no.: 78736757

1-component, expanding PU foam with a very low content of monomeric isocyanates under .1%. Its fine cell structure improves thermal and acoustic insulation properties. High thermal and acoustic insulation value, flexibility, low curing pressure, and enhanced UV resistance make it an excellent product for the installation of window and door frames. As no additional moistening is required, it is also excellent for sealing narrow and deep joints. Adheres well to most materials such as wood, concrete, stone, plaster, metal, PVC, and polystyrene.

Adhesive & Sealant Tec7

Adhesive & Sealant Tec7

Art. no.: 326660

Adhesive & Sealant Tec7

Adhesive & Sealant Tec7

Adhesive & Sealant Tec7

Adhesive & Sealant Tec7

Adhesive & Sealant Tec7

Sealing pu foam dana 594

Sealing pu foam dana 594

Art. no.: 232858

One-component PU foam in a standard bottle. Not resistant to UV light. Repaintable. For sealing and insulating. Hazard labelling: Harmful to health, extremely flammable, contains isocyanates.

Sealing pu foam dana 594

Industrial Silicon Sealtite 210

Industrial Silicon Sealtite 210

Art. no.: 305298

Industrial silicone Sealtite 210, black.

Fire Protection Compound Nullifire

Fire Protection Compound Nullifire

Art. no.: 708135

Nullifire FR230 Standard is a gypsum-based fire protection compound for sealing penetrations in fire-rated walls and floors. The product is in powder form and is mixed with water to the appropriate consistency. It is used for sealing between concrete, lightweight concrete, brick, and masonry, as well as for cable penetrations, cable trays, pipes, etc. It can also be used with Nullifire FP302 for fire sealing of plastic pipes. See the technical data sheet for FP302.

Caulk A95 Sunchem

Caulk A95 Sunchem

Art. no.: 6750220

Caulk A95 Sunchem

Flange seal loctite 574 25ml

Flange seal loctite 574 25ml

Art. no.: 270262

Replaces cut gaskets on plane and polished surfaces. For pumps, thermostats, oil trays, valve covers, engine blocks, gearboxes, etc. Excellent chemical resistance. Max gap-filling 0.5 mm. Can be pressurised after 15 minutes. Not skin-forming. Hazard labelling: irritant.

Flange seal loctite 574 25ml

Industrial silicone Locite SI5366

Industrial silicone Locite SI5366

Art. no.: 462072

Colourless 1-component industrial acetoxy silicone sealant/adhesive. Its flexibility enhances the joint's load-bearing and shock absorption properties.

LOCTITE SI 5366 is a colourless 1-component industrial acetoxy silicone sealant/adhesive that has been developed specifically to ensure perfect sealing as well as adhesion and protection. Typical applications include sealing of side windows in train cars, sealing of heat sources (ovens, heat exchangers, steam lines, water heaters), protection/insulation of electrical cabinets, adhesion of HCR silicone and general maintenance. High tensile strength at 530%.

The advantages:
Special composition for perfect sealing.
1-component product -- requires no mixing.
Enhances the joint's load-bearing and shock absorption properties.
Quick skin formation.

Sealing Glue Icoklister

Sealing Glue Icoklister

Art. no.: 318088

Cold-liquid asphalt adhesives are used for coating overlays on nailed underlay coverage. Applied with thick brush. Drying time: about 1 day at +20°C. Colour: black. Hazard labelling: harmful to health, environmentally hazardous.

Sealing Glue Icoklister

Sealants sikasil-e

Sealants sikasil-e

Art. no.: 110411

One-component, quick curing, elastic glass silicon. Vinegar-based. The white is a mildewcide treated. Resistant to water, die looted assets, normal detergents, UV-radiation, saline solutions. Temporarily resistant to oils, fuels, grease, spirits. Not resistant two formic acid, strong lye, acetic acid, solvents (exception spirits). Used for glass and sanitary purposes, e.g. joins in kitchens and bathrooms, sheet work, top sealing of windows, cold rooms, glueing of aquariums and silicon strips. Sikasil-E transparent should be used for glowing aquariums. Adheres without primer on glass, tiles, ceramic tiles, enamel, anodised aluminium, polyester, etc. application temperature -10°C - + 40°C. Registered in Basta.

Sealants sikasil-e

Industrial silicone Loctite SI5368

Industrial silicone Loctite SI5368

Art. no.: 462074

Black 1-component industrial acetoxy silicone seal for the automotive and aerospace industry as well as electronics. Has quick skin formation.

LOCTITE SI 5368 is a black 1-component industrial acetoxy silicone seal that was developed specifically as universal seal, but can also be used for bonding. The product is particularly suitable for the automotive and aerospace industry as well as the electronics industry. The product becomes tack-free on exposure to atmospheric humidity within 5 minutes and need not be mixed.

The advantages:
Universal seal.
Can also be used for bonding.
Tack-free after 5 minutes.
1-component product -- does not need to be mixed.

Fire Silicon Fireguard S654

Fire Silicon Fireguard S654

Art. no.: 377289

Fire sealant novaflex

Fire sealant novaflex

Art. no.: 1480019T

NOVAFLEX is a solvent-free grey sealant that expands when exposed to high temperatures in a fire and effectively seals any openings in the feed. NOVAFLEX is used mainly in fire sealing of plastic pipes and cable feeds in fire separating building parts. A detailed description can be found in the data sheet for system SKOTT HT. Works with Novaflex should be avoided at an ambient temperature lower than + 10 ° C. Registered in Basta.

Fire sealant novaflex

FIRE SEALANT NOVATHERM SP

FIRE SEALANT NOVATHERM SP

Art. no.: 1480017T

Novatherm SP is a 1 component, bulging sealing material which has good adhesion to most surfaces. Novatherm SP is used together with base strips of ceramic fibre, mineral wool or other approved base material for sealing joints indoors, especially in fire-resistant building components and also as an environmental joint where some elasticity is required. Is also included in the Shot HT system for fireproofing of cable, pipes, ventilation penetrations, E160-E120 in dry environments. Registered in Basta.

FIRE SEALANT NOVATHERM SP

Fire Foam Sealant Nullifire FF197

Fire Foam Sealant Nullifire FF197

Art. no.: 708109

Fire sealant fss-400

Fire sealant fss-400

Art. no.: 1480431

Fire-classed sealing compound
Firestopp 400 is a fire-resistant water-based acrylic compound with intumescent properties making it swell if exposed to heat. It hardens to a semi-flexible seal and prevents the penetration of fire, smoke, gas and water. Tested and approved for fire classification El 60 / El 120.

Fire sealant fss-400

Fire sealant fss-400

Fire sealant aucustic fs100

Fire sealant aucustic fs100

Art. no.: 1480454

FireStop 100 is an acrylic compound especially developed for joins between different building elements such as plaster wall to solid ceiling, plaster wall to solid floor and plaster wall to solid wall. Noise reduction index: 58 dB. FireStop 100 Fire-classed joins between plaster wall and ceiling, floor and walls. SITAC approved. Including acoustic seal.

Fire sealant aucustic fs100

Protega Fire sealing kit EL+

Protega Fire sealing kit EL+

Art. no.: 748724

Protega Fire seal kit EL +. Fire seal kit for cable, cable ladders, pipes and ventilation ducts. Fire class up to EI120. Complete package for installation in fire-separating solid wall / floor or rule wall. The seal is overpaintable and it is easy to supplement with more penetrations at a later stage. products are part of a system and are approved according to ETA17 / 0767 and ETA17 / 0764.

Mount board from each side in wall or floor with the help of the included joint / paint, seal with superwool and Ecomastic SP. If necessary, paint on cables / cable ladder 200mm. With painting, fire class EI120 is always achieved. For larger plastic pipes, you can supplement the system with a Novapipe S pipe sleeve and fasten it with a metal attachment.

Components: 1st Fire Disc Ecomastic Ribbed. Article number 1480013T. 1st Fire Drive Protega Superwool. Article number 1480048. 3st Brandfog Ecomastic SP 310ml. Article number 1480015T. 1 Fire protection paint Ecomastic 5FR 1 kg. Article number 1480009T. 1st Labeling label Fire seal 25-pack. Article number 1480042T.

Fire protection kit fs-univers

Fire protection kit fs-univers

Art. no.: 1480444

Universal kit with fire sealing material for cables, pipes and ventilation lead-throughs. The kit includes material for 18 dm² sealed area. FS-Universal is a complete kit for sealing of larger lead-throughs of cables, metal pipes and ventilation ducts in indoor environments (dry). The kit includes the required material for approx. 18 dm² sealed area. Area of use, see Fire sealing guide. Contents: 2 pcs FS-Universal sheets (600 x 1200 × 60 mm) of non-flammable mineral wool with intumescent (heat-swelling) surface layer, 2 × 0.310 l Firestop Sealant 3000 (white), 0.2 kg non-flammable mineral wool for caulking, 3 × fire seal identification labels and installation instructions. Noise reduction index: 51 dB.

Fire protection kit fs-univers

Caulk Seal & Fix Sunchem

Caulk Seal & Fix Sunchem

Art. no.: 6750204

Caulk Seal & Fix Sunchem

Sealants butyl fogmastic 544

Sealants butyl fogmastic 544

Art. no.: 260404

Oil-based plastic jointing compound four jointing internally and externally. Used round windows and doors, for hidden joints and joints with limited movement. Can handle joint movements of +/- 10%. Primer-free on most surfaces. Can be painted. Not tamper-proof. Registered in Basta.

Asphalt repairer Potmix Repair

Asphalt repairer Potmix Repair

Art. no.: 305770

Pot-Mix mends all types of holes, pits and tracks in asphalt, fills out around wells and evens out sharp edges. In cooler weather, should be stored in a heated stores or indoors one day before usage.

Fire bandage Pipe Strangler Protega Novapipe W

Fire bandage Pipe Strangler Protega Novapipe W

Art. no.: 1480028

Novapipe W is a rapidly expanding pipe strangler. Easily mounts around penetrations using a velcro attachment.
When penetration into the wall, 1st Novapipe W is mounted on each side and in the case of joists the bandage is mounted only from the underside.
In the rule wall, Novapipe W is mounted in a metal mare with part number 1480041. The space around the pipe strangler is sealed (environment & sound seal) easily with Novatherm SP part number 1480017T. Pipe strangler/fire tape is used for plastic pipes, cables in bundles and or plastic pipes in bundles. E.g.: VP pipes, Tap water pipes, sewage pipes made of PVC, PE and PP etc. Novapipe W is sold in fixed sizes for pipe outer diameter up to 125mm.
APPROVAL: ETA 17/0766 for fire sealing of plastic pipes. Fire rating up to EI 120.

Adhesive & Sealant Trans Clear

Adhesive & Sealant Trans Clear

Art. no.: 326667

Adhesive & Sealant Trans Clear

Laying kit Baowachs

Laying kit Baowachs

Art. no.: 307808

Baowachs -- mending putty is ready to use, comes in many different shades for quick repairs of wood or laminate surfaces. For various types of surface damage, such as twist holes, scratches, cracks, nails and screw holes. Heat the stick in your hand and fill in the area to be repaired after staining. The wax is lightweight, does not sink, adheres to the material and can be stained with retouching paint and varnishes. Box of 20 sticks.

Laying kit Baowachs

Laying kit Baowachs

Laying kit Baowachs

Wood Floor Repair Kit

Wood Floor Repair Kit

Art. no.: 68117582

Facade Sealant illbruck SP525

Facade Sealant illbruck SP525

Art. no.: 71296177

Low-modulus, elastic, and stable facade sealant based on advanced polymer technology for both interior and exterior use. SP525 is ideal for sealing joints in facades, rain protection, and curtain walls, perimeter joints around windows, doors, and skylights, as well as joints with large movements (e.g., modular buildings). SP525 improves the acoustic performance of the joint and provides a sound reduction of up to 61 dB in a 10mm wide joint. Meets the requirements of EN ISO 11600 F 25LM. Weather-, UV-, and age-resistant. High movement capability, fast curing, and extremely low risk of discoloration. Remains elastic. ISEGA certified. Contains no isocyanates or solvents.

Putty plastic padding wood

Plastic Padding

Putty plastic padding wood

Art. no.: 569211

PP Chemical Wood is a light brown special filler for wood materials. Easy to shape, cut and sand. Can also be used outdoors as the material is very weather-resistant and neither shrinks nor cracks. Can be painted or lacquered for the desired colour.

Putty plastic padding wood

Fire Sealant Fireguard MS567

Fire Sealant Fireguard MS567

Art. no.: 716652

Moisture-curing sealant. Used in conjunction with joints around, for example, windows, doors, light partition walls, floors, and ceilings that need to be fireproofed. With specific joint constructions, joints made with Fire Guard MS 567 can achieve a fire rating of EI 120 minutes. Odorless, neutral, fast-curing, and has very good resistance to climatic influences. After curing, it can accommodate joint movements of up to +/- 20%. Tested according to EN 1366-4: 2010, linear joints, and meets ISO 11600 HM20. Meets emission requirements according to Emicode EC 1PLUS. See product information at danalim.se for tested materials and EI times.

Fire Sealant Fireguard MS567

Sealants Multiseal Building Fog

Sealants Multiseal Building Fog

Art. no.: 419377

Elastic sealants for interior and exterior grouting. Has very good adhesion to most building materials without primer. hardens with moisture. Fast curing. Good age resistance. Joint Movement: approx. 20%.

Light Filler Sika Filler-105

Light Filler Sika Filler-105

Art. no.: 778798

Sika® Filler-105 is a water-based coarse lightweight filler of all-round type for coarse filling of concrete, plaster, and render, etc. indoors. A finer filler should be used for surface treatment before painting. Ready to use, no mixing required. Has excellent adhesion to plaster and concrete. Fast-drying.

Sealants sikacryl hm

Sealants sikacryl hm

Art. no.: 175831

One-component, elastic, acrylic latex-based. Cures by evaporation of water. Good adhesion on concrete, brick, stone, tiles, ceramic tiles, marble, wood, aluminium, steel, glass, PVC and painted surfaces. Does not discolour surrounding materials. Repaintable (test first). Can be applied down to + 5° C. Surface dry after approximately 30 minutes. Fully cured after 1-3 days. Used for indoor sealing of joints around windows and doors, walls and metal sections, filling of joints, sealing of joints when Installing plaster panels and repair and sealing of wooden building façades, e.g. when repainting. Also suitable for repairing window party and gluing of cellular plastic sheets. Can be applied on damp surfaces, but should not be used for joints exposed to constant water contact. Registered in Basta.

Sealants sikacryl hm

Putty sikafiller-103 medium

Putty sikafiller-103 medium

Art. no.: 308275

An all-round water-based, medium-coarse, light putty. For filling of concrete, plaster, and trimmings, etc. indoors. Particularly suitable for seam filling with strip. Colour: light grey. 10 litre. Registered in Basta.

Light Pack Filler One Strike

Light Pack Filler One Strike

Art. no.: 377386

A lightweight filler for evening out different surfaces before painting or wallpapering. Based on a polymer light weight filler, which has excellent qualities. Developed for professionals and DIY. Suitable as a filler in: plaster, tiles, stone, wood, plaster. Do not use on metal or plastic or wet surfaces. White after drying.

Light Filler Tec7 FILLER

Light Filler Tec7 FILLER

Art. no.: 3874242

FILLER is an ultra-light, shrink-free, and fast-curing filler for filling and repairing holes and damages on untreated, painted, or plastered surfaces of wood, gypsum, fabric, concrete, etc., and other porous surfaces, both indoors and outdoors. It is ready to use, can withstand freezing in the packaging, and has a long shelf life, even after the package is opened. FILLER is easy to apply and provides a smooth and fine surface, even without sanding. It can be painted over after 20 minutes, at a thickness of approximately 5-10 mm, a temperature of +25 °C, and 65% humidity. At other temperatures or humidity levels, it is recommended to wait 60 minutes. Once fully cured, FILLER becomes water-repellent and elastic, so it does not crack with material movements.

Light Filler Tec7 FILLER

Sealants sikaflexpro3sl

Sealants sikaflexpro3sl

Art. no.: 224241

A one-component durable jointing compound for horizontal movements and construction joints. Fast curing. Permanently elastic, good adhesion. Handles 10% joint movement. Hazard labelling: irritant. Contains isocyanate.

Fire Sealant Sikacryl 621 Fire+

Fire Sealant Sikacryl 621 Fire+

Art. no.: 35522283

Fire Sealant Sikacryl 621 Fire+

Icoflux Cold Asphalt

Icoflux Cold Asphalt

Art. no.: 318093

Cold-liquid asphalt solution for moisture insulation of masonry and concrete surfaces above and below ground. The surface must be pre-coated with Icoflux Primer. Drying time: approx. 3-4 hours at +20° C. Hazard labelling: harmful to health, environmentally hazardous.

Icoflux Cold Asphalt

Showing 52 of 208