2N® Access Enhet

DatasheetsDo you have a project for modernising a house, including the access control? Do you want to remove the old controllers, simplify administration and at the same time allow residents to keep their old cards? Select our RFID reader for cards on a frequency of 125 kHz. You only need a UTP cable to connect it to the network and power supply. Forget about connecting with the controller. The unit is a smart device in its own rightTechnical ParametersInterfacesPower supply:PoE and/or 12 V/1 A DCPoE:802.3af (Class 0–12.95 W)LAN:10/100BASE-TX with Auto-MDIX, RJ-45 modular jackRecommended cabling:Cat-5e or betterActive switch output:8 to 12 V DC/max 600 mAPassive switch:NO/NC contacts, up to 30 V/1 A AC/DCInputs:2 inputs - in passive/active mode (-30 V to +30 V DC)OFF = open or Uin> 1.5 VON = short-circuit or Uin< 1.5 VTamper switch:native part of the 2N Access Unit 2.0Audio:buzzer (97dBA)Supported protocols:DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, SyslogRFID Card ReaderSupported frequencies:125 kHz variant125 kHz:EM4100, EM4102, HID ProxMechanical PropertiesFrame:robust zinc cast frame with surface finish (nickel and black color)Operating temperature:-40°C to +60°CStorage temperature:-40°C to +70°COperating relative humidity:10%-95% (non-condensing)Dimensions Wall (surface) mounting frame:- 1 module: 107 (W) x 130 (H) x 28 (D) mmDimensions Flush mounting frame:- 1 module: 130 (W) x 153 (H) x 5 (D) mmDimensions Flush mounting box (minimum hole):- 1 module: 108 (W) x 131 (H) x 45 (D) mmWeight:max 0.8 kgCover rating:IP54 and IK08