Order lines: 0

Ahlsell Products Mounting Disc mounting

Disc mounting

Tools for metal extanders

Products (31)

Metal expansion anchor for thin sheet metal FIXX

Metal expansion anchor for thin sheet metal FIXX

Art. no.: 4443638

Metal Expander Fixx

Metal Expander Fixx

Art. no.: 1507726

Metal expander for strong attachment in slabs and hollow walls.
Metal expander with arms expanding on the back of the slab. The metal expander is suitable for heavy-duty mounting according to the material properties of the slab.
Suitable for board thickness of 5-45 mm, requires a cavity behind the board. Suitable for use where fire resistance is required. The component can be removed and re-installed by loosening the screw. Tighten the anchor with a screwdriver or a special mounting bar.
Supplied complete with fully threaded screw.

Slice Toggle

Art. no.: 279686

Toggle-type metal anchors for varying board and wall thicknesses.
The toggle-type metal anchor goes into a hole in the wall and on the rear side of a board, flipping into position and anchoring. Also for easy ceiling mounting. The anchor is designed for wide load distribution and is therefore suitable for mounting heavy equipment adapted to the material properties of the board. Suitable for board thickness of 10-70 mm, requires a space of at least 50 mm behind the board. The wall insulation material may make the installation difficult. Suitable for use where fire resistance is required.

Disc Anchor KD

Art. no.: 289076

KD disc armature with screw.
Installed without any special tools in all types of disc materials, hollow spaces, tin roof, steel joists etc. with high durability requirement. All KD are supplied with long thread so they are also very suitable for lead-through installation.

Expansion anchor mx

Expansion anchor mx

Art. no.: 717870

MX nut is a screw anchor for thin materials such as sheet metal, plastic etc. Maximum material thickness is 10 mm. Grip wings expand and grip the material, The installation is done blindly from one side, which makes the product extra useful. Version: Flat head, collared sleeve with metric thread Supplied without screws.

Expansion anchor mx

Expansion anchor mx

Assembly tool Edma 213

Assembly tool Edma 213

Art. no.: 305268

Professional tools. For complete plasterboard anchor with screw. 45° angle. Intended for 4, 5, 6, 8 mm plug. When the legs of the tool are pressed together, the plaster anchor vanes expand and attach to the material.

Mounting Tool Mola

Mounting Tool Mola

Art. no.: 75250810

Mounting Tool Mola

Mounting Tool Ironside Melatexpander

Mounting Tool Ironside Melatexpander

Art. no.: 78508235

Assembly tool for complete drywall anchors with screws. Step-fed with ergonomic grip. Suitable for M4, M5, M6.

Duo-Max

Schneider Electric

Art. no.: 1509014

For installation in boards. The range covers board thicknesses of 3-35 mm. Supplied with slotted screws or hooks.

Platti

Schneider Electric

Art. no.: 1509040

For installation in boards. The range covers board thicknesses of 5-35 mm. Supplied with slotted screws or hooks.

Expansion anchor

Expansion anchor

Art. no.: 3818828

Intended for mounting in nearly all materials and in combination with spacer tubes it is a secure fastener in porous materials. Rawl nut is the ideal
attachment in wet rooms as it is corrosion-proof and waterproof. It is also vibration-damping and electrically insulating. Also expands in very thin board material.
When tightening the screw the rubber expander expands at the back of the board. In porous material it expands inside the material. Made of synthetic
rubber with cast metric brass nuts. Supplied without screws.

Max. recommended load (Kg)

Plug toggler snapskru

Plug toggler snapskru

Art. no.: 312738

SnapSkru is a self-drilling plasterboard anchor with a unique locking function that opens and fastens at the rear of the panel. When activated by the screw, a little "POP" is heard and the wings of the anchor then open at a 30 degree angle. The plasterboard powder and paper will then be immediately re-reinforced. In addition, SnapSkru is equipped with an inbuilt “positive stop” that helps avoid overlap and remains in the wall when you want to remove the detail. It’s great being able to reuse the same anchor. SnapSkru is resistant to vibration and shock.

Permissible loads (kN) in single plasterboard using a 4x35 mm screw and with a safety factor of 4.

Plug sormat ola

Plug sormat ola

Art. no.: 233538

OLA- A tried and tested sheet attachment for hollow walls with varying board and wall thicknesses.
Sheet attachment with arms that expend on the back of the board. Made of long-life TPE. Suitable for sheet thicknesses ≥ 12 mm to 35 mm. The wall insulation material may make the installation difficult. Also functions in solid materials. Owing to these material properties, OLA withstands long-term loading, wear, weather, moisture and storage better than regular wall anchors.
Comes with screws 4 x 60 mm. The locking mechanism in OLA prevents the screw being tightened too hard.

Plug kla metal

Art. no.: 233901W

KLA Nylon - Self-tapping quick attachment made of metal for plaster walls.
Fireproof self-tapping fastening for single and double-sided plaster walls, composite plaster walls and gypsum fibreboards. Pre-drill with 8 mm bit for mounting in gypsum fibreboards and double plaster walls. The fastest way to mount light objects. No special tools required, just a screwdriver PZ2. Screwed in flush with the sheet surface. Do not over-tighten!
Comes with domed FZB screw 4.5 x 35 mm or 4.5 x 50 mm. Can also be used with other suitable wood screws, self-tapping screws and chipboard screws, as well as hook screws and eye screws.

Plug hw-pro 6-13mm f50

Plug hw-pro 6-13mm f50

Art. no.: 1509110T

Area of application: HW PRO is an attachment for quick and easy mounting in plasterboard 6-13 mm or boards. HW PRO is easy to mount for both professionals and DIYers. No predrilling required. HW PRO is hammered into the plasterboard or board with hammer.
Use wooden screws or mounting screws diam. 3.5-4.5 mm, length 30 mm + attached material.
Loading value kN in plaster (13 mm), 0.3/0.6 (tensile/cross).

Plug xl lightconc/dubb.plas.

Plug xl lightconc/dubb.plas.

Art. no.: 1509111T

Area of application: Attachment of details in double plaster and aerated concrete. XL is an attachment for quick and easy mounting in double plaster and aerated concrete. It is easy to mount for both professionals and DIYers. No predrilling required. XL is hammered into plasterboard or aerated concrete.
Use wooden screws or mounting screws diam. 3.5-4.5 mm, length min. 30 mm + attached material.
Loading value kN, Aerated concrete 1.2/1.6 (tensile/cross) - Double plaster 0.55/1.45 (tensile/cross).

Expansion anchor

Expansion anchor

Art. no.: 269974

Metal expander with hook

Mounting Tool Edma 232

Mounting Tool Edma 232

Art. no.: 305271

Professional tools. For complete plasterboard anchor with screw. Designed for 4, 5, 6 and 8 mm plugs. With step feeding. When the legs of the tool are pressed together, the plaster anchor vanes expand and attach to the material.

Plug kla nylon

Art. no.: 233900W

KLA Nylon - Self-tapping quick attachment for drywall.
Self-tapping nylon fastening for single and double-sided drywall.
The fastest way to mount light objects. No special tools required, just a screwdriver PZ2. Screwed in flush with the sheet surface. Do not over-tighten!
Pan head FZB screw 4.5 x 35 mm included. Can also be used with other suitable wood screws, self-tapping screws and chipboard screws, as well as hook screws and eye screws.

Metallexpander MOLA, SB-pack

Metallexpander MOLA, SB-pack

Art. no.: 312210

Metal expander for strong attachment in slabs and hollow walls.
Metal expander with arms expanding on the back of the slab. The metal expander is suitable for heavy-duty mounting according to the material properties of the slab.
Suitable for slab thickness of 13-26 mm, requires a cavity behind the slab. Suitable for use where fire resistance is required. The component can be removed and re-installed by loosening the screw. Tighten the anchor with a screwdriver or a special mounting bar.
Supplied complete with fully threaded screw.

Metal Expander Fixx Sb

Metal Expander Fixx Sb

Art. no.: 1507648

Metal expander for strong attachment in slabs and hollow walls.
Metal expander with arms expanding on the back of the slab. The metal expander is suitable for heavy-duty mounting according to the material properties of the slab.
Suitable for board thickness of 5-45 mm, requires a cavity behind the board. Suitable for use where fire resistance is required. The component can be removed and re-installed by loosening the screw. Tighten the anchor with a screwdriver or a special mounting bar.
Supplied complete with fully threaded screw.

Metal Expander Fixx Sb

Duo-Max with hook

Schneider Electric

Duo-Max with hook

Art. no.: 1509016

Duo-Max with hook

Drywall Plug Fischer DuoBlade

Drywall Plug Fischer DuoBlade

Art. no.: 74050683

Fischer DuoBlade is the newest member of the DuoLine. It consists of various components that enable the best possible performance. The self-drilling tip allows for a clean and efficient drilling process. The fastener is screwed into pre-assembly with a (cordless) screwdriver as the setting tool and is flush-mounted in the drywall.

Fischer DuoBlade is suitable for wood, metal, and chipboard screws from 4-5 mm thick as well as various hooks and eye screws. Consequently, it is perfect for securely and quickly fastening items such as smoke detectors, curtain rods, and blinds. DuoBlade is placed in the drywall with a standard PZ 2-bit. No special setting tool is needed.

Drywall Plug Fischer DuoBlade

Metal expansion anchor MCA Ejot

Metal expansion anchor MCA Ejot

Art. no.: 708190

Metal expansion anchor MCA Ejot

Gipskvick

Västsvensk Byggskruv AB

Art. no.: 1508437

Setting Tool Rapid xp20

Setting Tool Rapid xp20

Art. no.: 72088164

Setting Tool Rapid xp10

Setting Tool Rapid xp10

Art. no.: 72088166

Setting Tool Rapid xp30

Setting Tool Rapid xp30

Art. no.: 72088168

Setting Tool Rapid xp30

Cavity fixing DuoHM S

Cavity fixing DuoHM S

Art. no.: 4450069

DuoHM drywall anchor covers all common material thicknesses from 9.5 - 30 mm with just one length. Thanks to the unique combination of nylon and metal, DuoHM allows for high loads and maximum flexibility in panel materials. The metal sleeve folds behind the construction material and presses against the back of the panel while the plastic part knots into the panel. DuoHM is installed quickly and easily with a screwdriver without any additional setting tools. This reduces installation time by up to 50% compared to conventional fasteners. Thanks to the metric internal thread, the anchor can be screwed in and removed multiple times. Besides the included screw, DuoHM can also be used with other metric screws. The nylon rotation lock protects the surface of the construction material from damage. Thanks to the narrow plug edge, the anchor is no longer visible behind the fastening.

Cavity fixing DuoHM S

Cavity fixing DuoHM S FixTainer

Cavity fixing DuoHM S FixTainer

Art. no.: 4450075

Stella Drywall Plug PZ2

Stella Drywall Plug PZ2

Art. no.: 1509183

Mounts heavy objects on plaster, masonite and other plates with underlying cavities. Made of Nylon (PA6 Halogen-free) Temperature resistant from –40ºC to +80ºC. Mount in 10mm holes. When the electrogalvanized steel screw grips the metal nut (M5), the plug contracts and forms a knot in the back of the plate. Stella black Screw PZ2 is for 1 & 2 layers 5-30mm with anchor length 10x59mm and screw length 65mm which attaches objects with a thickness of max 12mm where the maximum load capacity is 45kg*.

Showing 31 of 31