Order lines: 0

Ahlsell Products Mounting Construction fittings Assembly tape

Assembly tape

Products (5)

Mount.band ffzv

Mount.band ffzv

Art. no.: 232310W

Mounting tape is used for example for suspension of pipes, cable trays, ceilings and ventilation ducts.

Mount.band ffzv

Mount.band ffzv

Mount.band ffzv

Mount.band ffzv

Punched bands

Art. no.: 145430

Perforated strip is used for anchoring wooden structures for wind load. Can be used for mounting of ventilation ducts. Perforated strip 1.0x20 and 1.5x20 can be bent and twisted in place while 2.0x25 is primarily intended for use as flat fittings. When a perforated strip is used the rules for edge distance, internal nail distance, etc. in accordance with BKR (the design rules of the Swedish National Board of Housing, Building, and Planning) must be applied. Anchorings should be performed so that their are no loose connections if the woodwork shrinks. The perforated strip should be stretched hard before firmly nailing down.

Mount.band r2333

Mount.band r2333

Art. no.: 3817708

Mounting tape is used, e.g., for suspension of pipes, cable racks, sub ceilings, and ventilation shafts. The tape is supplied in 25-metre rolls in a practical cross-tied roll, making it easier to handle at the work site and reducing waste.

Straps hdg

Art. no.: 127774

Strapping is used for stabilisation of wooden structures. They are also used as cross braces in floors and walls. When a perforated strip is used the rules for edge distance, internal nail distance, etc. must in accordance with BKR (the design rules of the Swedish National Board of Housing, Building, and Planning) must be applied. In order for the strap lashings to have the intended effect it is important that they are mounted well-tensioned.

Heco hole band

Art. no.: 817090

Showing 5 of 5