Order lines: 0

Ahlsell Products Mounting Concrete mounting Concrete screw

Concrete screw

Products (44)

Concrete screw Sormat S-CSA+ hexagon/flange FZB

Concrete screw Sormat S-CSA+ hexagon/flange FZB

Art. no.: 757981

Concrete screw Sormat S-CSA+ hexagon/flange FZB

Concrete screw Sormat S-CSA+ hexagon/flange FZB

Concrete screw Sormat S-CSA+ hexagon/flange FZB

CONCRETE SCREW S-CSA I

CONCRETE SCREW S-CSA I

Art. no.: 757928

CONCRETE SCREW S-CSA I

Concrete Screw Insta S-CSA ML

Concrete Screw Insta S-CSA ML

Art. no.: 1535424

Self-tapping approved concrete screw for through-hole installation. Requires a small drill hole diameter. No specified tightening torque. No expansion forces, accommodates small edge and spacing distances. Completely removable.

Concrete Screw Hex Head

Concrete Screw Hex Head

Art. no.: 504030

S-CSA I A4

Art. no.: 1535470

Self‑tapping A4 concrete screw for through‑installation.
Requires a small drill‑hole diameter. No specified tightening torque.
No expansion forces, allowing installation close to edges and between anchors.
Fully removable.
A4 stainless steel suitable for indoor, outdoor, and industrial use.

Concrete screw TAPCON hexagon / flange, exterior

Concrete screw TAPCON hexagon / flange, exterior

Art. no.: 499781

Mounting of metal profiles, suspension in ceiling/wall, scaffolding, plumbing etc. Mechanically galvanized at least 45 μm.

Concrete screw TAPCON hexagon / flange, exterior

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 499771

MMS-SS- Hexagonal head with flange. European type approved, ETA 06/0078 Option 1.
Suitable for attachment of consoles and ceiling profiles etc. directly to the concrete without using an extra plate.
I) Permitted load kN in concrete C20/25. * Not covered by the ETA values recommended by the manufacturer. Values within ( ) can be used as recommendation of the manufacturer. Cross load values apply to concrete screws without concrete edge impact.

Concrete screw multi-monti+

Concrete screw multi-monti+

Mms-plus i

Art. no.: 259280

MMS-I- with joint nut. European type approved, ETA 06/0078 Option 1. Fire rated in F120.

Concrete screw complete with a joint nut combi i.e. joint nut has both an internal M8 and M10 thread for connection. Suitable for attachment directly in concrete roofs and joining of pendulums or threaded rods directly in the splicing sleeve for different suspensions and pendulum structures from concrete roofs. Nut length 19mm.

Permissible load in uncracked concrete (C20/25) Tensile-3.0 kN Cross- 3.3 kN. Cracked concrete (C20/25) Tensile 2.0 kN.

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 498661

MMS-MS - with washer head (17mm) Permissible load in un-cracked concrete (C20/25) 2,0 kN.

Concrete screw Sormat S-CSA P spherical FZB

Concrete screw Sormat S-CSA P spherical FZB

Art. no.: 509639

Concrete screw Sormat S-CSA P spherical FZB

Concrete screw fs-h

Concrete screw fs-h

Art. no.: 251036

FSH - Countersunk head.
For fixing in concrete, brick wall, light concrete, natural stone, aerated concrete, and air brick. For mounting window and door frames made of wood, metal, and man-made materials. FS-H concrete screws save time with their quick and easy mounting capabilities. Constant, tension-free distance mounting. Large load capacity for small drilling diameters.
Recommended load value in concrete C20/25 - for 30 mm set depth Tensile load/Cross load 2.5 kN, for 40 mm set depth Tensile load/Cross load 3.8/2.5.

Concrete screw fs-h

Concrete screw fs-h

Concrete screw fs-h

Concrete screw fs-h

Concrete screw fs-h

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 499774

MMS-F / HMS-F- Countersunk head, Torx. European type approved, ETA 06/0078 Option 1.

Multi-Monti is an innovative anchoring system for attachment in concrete and brick. Sormot Multi-Monti is a concrete screw which can be screwed directly into a pre-drilled hole. The anchoring method is based on the fact that the serrated threads in the screw cut a groove in the concrete. The concrete screw’s special design means that after installation, it is free of expansion forces (manages small edge and internal distances) and can be loaded immediately. Completely removable, the anchor can be used twice. No recommended tightening torque is required for secure attachment in concrete and other solid materials such as calcareous sandstone, solid brick, tiles, and also in concrete cellular floors.

I) Permitted load kN in concrete C20/25. * Not covered by the ETA values recommended by the manufacturer. Values within ( ) can be used as recommendation of the manufacturer. Cross load values apply to a concrete screws without concrete edge impact.

Mms-ks 5 x 40

Art. no.: 368259

HMS-KS-Small head. Suitable for attachment of cable clamps, but also suitable for attaching batons such as floor bases directly to concrete walls. Also available with white head. Permissible load in uncracked concrete 2.6 kN. Fire rated in F120.

Concrete screw FBS-R Ejot spherical head exterior

Concrete screw FBS-R Ejot spherical head exterior

Art. no.: 662438

Concrete screw FBS-R Ejot spherical head exterior

Concrete screw multi-mont+

Concrete screw multi-mont+

Art. no.: 310802T

MMS-S / HMS-S- Hexagonal head. Delta Protect surface treatment, for outdoor use. Corrosion protection corresponding to 45 µm hot-dip galvanisation.

Multi-Monti is an innovative anchoring system for attachment in concrete and brick. Multi-Monti is a concrete screw that can be driven directly into a pre-drilled hole. The anchoring method is based on the fact that the serrated threads in the screw cut a groove in the concrete. The concrete screw’s special design means that after installation, it is free of expansion forces and can be loaded immediately. No recommended tightening step is needed for secure attachment. Multi-Monti can be used for attachment in concrete and other solid materials such as calcareous sandstone, solid brick, tile, and also in concrete cellular floors.

The values are recommended by the manufacturer. Transverse load values apply to a concrete screw without influence from the concrete edge.

Concrete screw Sormat S-CSA ML hexagon/flange exterior

Concrete screw Sormat S-CSA ML hexagon/flange exterior

Art. no.: 757989

Screw multi-monti utv-c4

Screw multi-monti utv-c4

Art. no.: 310816

MMS-S - Hexagonal head with EPDM plate (19x8,4x1). Protect 4 surface treatment, for external use, corrosiveness class C4.
Suitable for attachment of sandwich elements of various types directly to concrete pillars.

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 499776

HMS-P - Convex head.
Suitable for attaching medium-weight loads like rails, signs, pipe suspension, etc. Suitable for building profiles, electric rails, brackets, etc. Small edge and internal distances.
Permissible load in un-cracked concrete (C20/25) 1.9 kN.

Screw multi-monti outside-c4

Screw multi-monti outside-c4

Art. no.: 310811T

MMS-SS- Hexagonal head with flange. Protect 4 surface treatment, for external use, corrosiveness class C4.
Suitable for attachment of consoles and ceiling profiles etc. directly to the concrete without using an extra plate.

Screw multi-monti hms-r

Screw multi-monti hms-r

Art. no.: 508112

HMS-R - with eye.
Suitable for attaching wires to fittings, etc., ventilation and pipe fittings and similar mounting directly to concrete without plug. Fire rated in F120. Inner hole 7 mm, Eye diameter 14 mm.
Permissible load in uncracked concrete (C20/25) 4.2 kN.

Concrete screw with flange

Concrete screw with flange

Art. no.: 1556620

Concrete screws that are screwed directly into concrete, pre-drill with 6 mm and 8 mm drills. The maximum loads below apply to non-cracked concrete K25 with safety factor 3. For concrete K20, calculate 75% of the max loads.

Accessories Concrete screw with loop

Accessories Concrete screw with loop

Art. no.: 361151

Accessory Concrete screw with eye

BS-R sandwich screw, for concrete

BS-R sandwich screw, for concrete

Art. no.: 414081

Sandwich element screw BS-R for concrete. Klimadur -treated for outdoor usage Corrosion class - C3.

BS-R Concrete screw is a screw for mounting directly into concrete. Simple installation and high extraction value.
Installation instructions for concrete. Drill 5 mm through the sandwich panel and 40 mm deep into the concrete. The mounting depth in the concrete should be at least 30 mm. Use a screwdriver with max 600r/m.

* As the name suggests Sandwich element min-max.

Concrete screw Sormat S-CSA hexagon / flange

Concrete screw Sormat S-CSA hexagon / flange

Art. no.: 494604

Concrete screw Sormat S-CSA recessed

Concrete screw Sormat S-CSA recessed

Art. no.: 494615

Concrete Screw Wafer

Concrete Screw Wafer

Art. no.: 499682

Washer DDT Ejot

Washer DDT Ejot

Art. no.: 514479

Concrete screw Wafer head white

Concrete screw Wafer head white

Art. no.: 546522

Concrete screw MTX zinc

Concrete screw MTX zinc

Art. no.: 707541

Concrete screw MTX white

Concrete screw MTX white

Art. no.: 707539

Assembly Screw INSTA M8/M10 Concrete

Assembly Screw INSTA M8/M10 Concrete

Art. no.: 725122

Assembly Screw INSTA M8/M10 Concrete

Assembly Screw INSTA Stainless Steel Concrete

Assembly Screw INSTA Stainless Steel Concrete

Art. no.: 756276

Assembly Screw INSTA M8 Concrete

Assembly Screw INSTA M8 Concrete

Art. no.: 757421

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Art. no.: 534553

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Concrete screw Sormat S-CSA+ ML hexagon/flange exterior

Concrete screw Hexa S Silver Ruspert

Concrete screw Hexa S Silver Ruspert

Art. no.: 46691535

Concrete screw Hexa S Silver Ruspert

Concrete screw Sormat S-CSA+ hexagon FZB

Concrete screw Sormat S-CSA+ hexagon FZB

Art. no.: 52315478

Concrete Screw Sormat S-CSA Hex/Flange A4

Concrete Screw Sormat S-CSA Hex/Flange A4

Art. no.: 70345614

Self-tapping A4 concrete screw for through-hole installation. Requires a small drill hole diameter. No specified tightening torque. No expansion forces, suitable for small edge and spacing distances. Fully removable. A4 for indoor, outdoor, and industrial use. European Technical Assessment ETA-22/0413 – Option 1 for cracked and non-cracked concrete for concrete screws S-CSA A4 size 8.

Concrete Screw Sormat S-CSA Hex/Flange A4

Concrete Screw Sormat S-CSA Hex/Flange A4

Concrete Screw Sormat S-CSA Hex/Flange A4

Concrete Screw Sormat S-CSA Hex/Flange A4

Concrete Screw Sormat S-CSA Hex/Flange A4

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Art. no.: 73041336

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Art. no.: 73041349

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

Concrete screw S-CSA P Sormat

CONCRETE SCREW S-CSA P FL C1

CONCRETE SCREW S-CSA P FL C1

Art. no.: 76775924

CONCRETE SCREW S-CSA P FL C1

CONCRETE SCREW S-CSA P FL C1

CONCRETE SCREW S-CSA P FL C1

CONCRETE SCREW S-CSA P FL C4

CONCRETE SCREW S-CSA P FL C4

Art. no.: 76776085

CONCRETE SCREW S-CSA P FL C4

CONCRETE SCREW S-CSA P FL C4

CONCRETE SCREW S-CSA P FL C4

CONCR SCREW S-CSA+CS

CONCR SCREW S-CSA+CS

Art. no.: 1535460

FZB for dry indoor environments and temporary outdoor use.
Concrete screw for cracked and uncracked concrete.
The concrete screw S-CSA can be mounted quickly and easily without the need for special tools. S-CSA handles large loads even when edge distances and mutual distances are small. It is removable and reusable, making it suitable for temporary fixings. No expansion forces, allowing for small distances both mutually and to the edge.
The concrete screw is screwed down into the drill hole through the item. In this way, the screw cuts a thread in the concrete. This thread creates a mechanical lock along the entire anchoring depth.
Self-tapping concrete screw for through-hole installation.
Requires a small drill hole diameter. No prescribed tightening torque.
No expansion forces, capable of handling small edge and mutual distances.
Completely removable.
Seismic category C2 with hef,2.
ETA 20/0446
Fire resistance assessed according to ETA up to R120.
FZB for dry indoor use.

CONCR SCREW S-CSA+CS

CONCR SCREW S-CSA+CS

CONCR SCREW S-CSA+CS

CONCR SCREW S-CSA+CS ML

CONCR SCREW S-CSA+CS ML

Art. no.: 1535463

Multi Layer (outdoor use) concrete screw for cracked and uncracked concrete.

The concrete screw S-CSA can be mounted quickly and easily without the need for special tools. S-CSA handles large loads even when edge distances and mutual distances are small. It is removable and reusable, making it suitable for temporary fixings. No expansion forces, allowing for small distances both mutually and to the edge. The concrete screw is screwed down into the drill hole through the item. In this way, the screw cuts a thread in the concrete. This thread creates a mechanical lock along the entire anchoring depth.

Self-tapping concrete screw for through-hole installation.
Requires a small drill hole diameter. No prescribed tightening torque.
No expansion forces, capable of handling small edge and mutual distances.
Completely removable.
Seismic category C2 with hef,2.
ETA 20/0446
Fire resistance assessed according to ETA up to R120.

ML (Multi Layer) corrosion-resistant coating has undergone a salt-spray test for 2,016 hours according to ISO 9227 and meets the requirements for neutral salt spray testing with corrosion class "C3 very high" according to DIN EN ISO 12944-6:2018-06.

CONCR SCREW S-CSA+CS ML

CONCR SCREW S-CSA+CS ML

CONCR SCREW S-CSA+CS ML

CONCR SCREW S-CSA+CS ML

Art. no.: 1535745

Showing 44 of 44