Order lines: 0

Ahlsell Products Heating and Sanitation Assembly

Assembly

Mounting system

Installation accessories

Technical chemical products

Products (326)

Glide support type 11BL according to SSG 7151, hot-dip galvanized

Glide support type 11BL according to SSG 7151, hot-dip galvanized

Art. no.: 3822585

Sliding shoe for insulated piping. Hot-dip galvanised. Supplied complete with screws and nuts. With long slide area.

Glide support type 11BL according to SSG 7151, hot-dip galvanized

HDG FZV Clip, Ergofast

HDG FZV Clip, Ergofast

Art. no.: 3878533

HDG FZV Clip, Ergofast

HDG FZV Clip, Ergofast

HDG FZV Clip, Ergofast

HDG FZV Clip, Ergofast

Split clamps, stainless steel with reinforcement in the clamp, a-collection

Split clamps, stainless steel with reinforcement in the clamp, a-collection

Art. no.: 19032826

Split clamps, stainless steel with reinforcement in the clamp, a-collection

Rubber-Coated M8-M10 Clips 272, Jirva

Rubber-Coated M8-M10 Clips 272, Jirva

Art. no.: 3793515

Split clamps, stainless steel

Split clamps, stainless steel

Art. no.: 19032817

Stainless acid-resistant steel 316L. Supplied in pairs.

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Art. no.: 3878557

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Cooling EF Husky Clip with 13 mm Insulation, MEFA

Stainless Steel 316L Clip with Connecting Nut 378, Jirva

Stainless Steel 316L Clip with Connecting Nut 378, Jirva

Art. no.: 19033125

Stainless steel dual clamp with 2 accompanying screws in accordance with 316L. Connection thread, combined M8 or M10–thread.

Cleaning Prols Grillfixol P43

Cleaning Prols Grillfixol P43

Art. no.: 377316

Powerful special detergent for burnt remains of fat, protein and other remains in grills, ovens, smoke generators, etc. The product succeeds in removing the most severe burnt remains in ovens. Works quickly and is easy to rinse off and leaves no unpleasant odour. Does not damage oven and grill but do not use on light alloy.

Clip 300HD, Jirva

Clip 300HD, Jirva

Art. no.: 3793551

EF Maxima Clip, MEFA

EF Maxima Clip, MEFA

Art. no.: 3878598

EF Maxima Clip, MEFA

EF Maxima Clip, MEFA

EF Maxima Clip, MEFA

EF Maxima Clip, MEFA

EF Maxima Clip, MEFA

Two-part clamps type SSG, stainless steel 1.4404

Two-part clamps type SSG, stainless steel 1.4404

Art. no.: 3808732

Stainless. Of material EN 1.4404. Supplied without screw and nut.

Thread seal UNITEC HOT

Thread seal UNITEC HOT

Art. no.: 4051441

UNITEC HOT is particularly well suited for joints exposed to high temperatures of up to +230 °C. The product is extremely resistant to impact and vibrations and has high locking force, which in particular that the joint strength is the same as hinge locking. A blowtorch has to be used in order to loosen the joint. Working temperature range from 50 to +230 °C. Can be handled after 20-40 minutes. Curing time: 3-6 hours. UNITEC HOT is approved for gas and high temperatures of up to +230 °C.

Two-part clamps type SSG, untreated iron

Two-part clamps type SSG, untreated iron

Art. no.: 3808710

Untreated. The clamps are manufactured in accordance with SSG standard and are intended for installation in plants where there are strict requirements for precision and strength. Supplied without screw and nut.
In addition to the dimensions below, the wrap clamps can be supplied in all SSG dimensions. See Hot dip zinc-coated.

Rubber-Coated Single-Screw M8 Clips 231, Jirva

Rubber-Coated Single-Screw M8 Clips 231, Jirva

Art. no.: 3793593

Rubber-Coated Single-Screw M8 Clips 231, Jirva

Fixing Clamp EF FGL, MEFA

Fixing Clamp EF FGL, MEFA

Art. no.: 4024376

Electro-galvanized Fix Clamp with M8/M10 and 1/2" suspension option. The dimensions of the pipe clamp are 25 x 3.0 mm. Recommended for a maximum axial force of 0.7 kN.

Fixing Clamp EF FGL, MEFA

Fixing Clamp EF FGL, MEFA

Fixing Clamp EF FGL, MEFA

Fixing Clamp EF FGL, MEFA

Fixing Clamp EF FGL, MEFA

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Art. no.: 8806009

Spacer bowl for hot HVAC pipes to reduce heat loss at suspension points. Two ArmaFORM PET sections covered with a 0.8 mm aluminum jacket. Load-bearing PET FOAM, gray tape, and external protection with 0.8 mm aluminum sheet, which also serves as a vapor barrier for the PET segments. ArmaFix HVAC is suitable for pipes with operating temperatures up to +110 °C. Delivered with clamps.

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Spacer Bowl ArmaFix HVAC, with insulation thickness 30 mm, Armacell

Rubber-Coated M8/M10 Clips 272, Stainless Steel 316L, Jirva

Rubber-Coated M8/M10 Clips 272, Stainless Steel 316L, Jirva

Art. no.: 19034153

Stainless acid-proof 316L split clamp with 2 supplied screws, of which one is equipped with quick release. Size 10-12 with one screw closing.
Connection thread combined M8 or combined M8/M10–thread or M10. Rubber profile of aging-resistant EPDM rubber, 20x4,5/7,5mm.
Temperature-resistant between –50°C and +110°C. Recommended maximum load up to the 91mm size is 1.0 kN, and for the 220 size, 1.5 kN.

Spacer Cups Armafix FX-2-with increasing insulation thickness

Spacer Cups Armafix FX-2-with increasing insulation thickness

Art. no.: 43704012

To carry and insulate coolant- and refrigerant-bearing at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Consisting of shell in a piece coated with glue-coated closure. With built-in water vapour block, which isas good as that of the insulation. Temperature range -50°C - +110 °C.
Built-in water vapour block, µ>10000
Can be used together with AF/Armaflex hose series AF 2 and 1.
Delivered with suitable pipe holder made of zinc-coated steel. When ordering by Article no., include holder
Please note! Spacer shell and holder are ordered separately

Pipe clamp Snappex, Faluplast

Pipe clamp Snappex, Faluplast

Art. no.: 2993135

PEX clamp Ø 25 or 34 mm – Simple clamp for quick and flexible installation!
This PEX clamp is designed for easy and secure fastening of PEX pipes. The clamp can be opened and closed smoothly, making it possible to install it before or after the pipe has been clicked into place. Perfect for plumbing installations where flexibility is crucial.

Pipe clamp Snappex, Faluplast

Mounting strap 17x1.0 FFZV, a-collection

Mounting strap 17x1.0 FFZV, a-collection

Art. no.: 3816826

Mounting tape is used, e.g., for suspension of pipes, cable racks, sub ceilings, and ventilation shafts. The tape is supplied in 25-metre rolls in a practical cross-tied roll, making it easier to handle at the work site and reducing waste. Material: Stainless steel 316L (acid-resistant)

Beam Clamp type "Big Mouth", electro-galvanized Fzb

Beam Clamp type "Big Mouth", electro-galvanized Fzb

Art. no.: 3820390

With threaded hole and extra large gripping capacity.

Two-part clamps type SSG, stainless steel 1.4301, Ahlsell

Two-part clamps type SSG, stainless steel 1.4301, Ahlsell

Art. no.: 3809335

Stainless. Of material EN 1.4301. Supplied without screw and nut.

Split clamps type SSG, hot-dip galvanized

Split clamps type SSG, hot-dip galvanized

Art. no.: 3808691

For:
Stainless pipe, max 200°C
Unalloyed steel pipe, max 200°C
Pipe of hard av thermoplastic
Pipe of thermosetting resin
The wrap clamps below are supplied without screw and nut.
Recommended screw:
DK 11 - DK 28 M 6x20
DK 31 - DK 90 M10x40
DK 104 - DK 196 M16x60
DK 207 - DK 359 M20x80
DK 410 - DK 513 M24x80
DK 562 - DK 610 M24x100

Cover plates Faluplast, white, flat, separable

Cover plates Faluplast, white, flat, separable

Art. no.: 3840030

Cover plates Faluplast, white, flat, separable

Cover plates Faluplast, white, flat, separable

19mmx15mx0.2mmthread seal tape

19mmx15mx0.2mmthread seal tape

Art. no.: 4054019

Made of PTFE. Recommended for temperatures from -200°C to +160°C. Suitable for steam.

19mmx15mx0.2mmthread seal tape

Ceiling mount for U-profile pendulum iron

Art. no.: 3820131

Prices are always stated per piece. Type U2 = 2 mm material thickness. U3 = 3 mm material thickness.

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Spacer Cups Armafix Ultima UDP, with insulation thickness 19 mm

Art. no.: 43871912

To carry and insulate pipes with coolant and refrigerant at suspension points in connection with insulation installation. Prevent cold bridges between pipes and suspension. Made from one piece of steel coated with glue.
For technical data, see Armafix Ultima Insulation. Can be supplemented with suitable pipe holder of zink-plated steel, alternatively folder with welded connection nut.

Mounting Bolt for EF Stex 45, MEFA

Mounting Bolt for EF Stex 45, MEFA

Art. no.: 4436225

Mounting Bolt for EF Stex 45, MEFA

Expander B

Art. no.: 3823999

Type 2 - Single clamp for hydraulic pipes with short welding plate and hex screw

Type 2 - Single clamp for hydraulic pipes with short welding plate and hex screw

Art. no.: 3811262

Cover plates Faluplast, white divisible

Cover plates Faluplast, white divisible

Art. no.: 3840097

Cover plate flat, not lockable. in white PS.

Cover plates Faluplast, white divisible

Cover plates Faluplast, white divisible

Clip a-collection No. 4372, Electroplated with Connecting Nut M8/M10

Clip a-collection No. 4372, Electroplated with Connecting Nut M8/M10

Art. no.: 43724160

Pre-galvanised, double-sided clamp with a screw on each side, and threaded nuts M8 and M10. Adapted to AF Armafix external diameter and allowable load at suspension points.

Descaling Protection SSG 7155 Type A / Type D

Descaling Protection SSG 7155 Type A / Type D

Art. no.: 3821122

For sliding shoes. Delivered individually.

Descaling Protection SSG 7155 Type A / Type D

Mounting brackets for threaded rod M8 or M10

Mounting brackets for threaded rod M8 or M10

Art. no.: 3831244

In electro-galvanised version with connection for threaded rod. With 80x30 mm fixing plate. Can be used in combination with rubber-coated and vibration-damping clamps.

Threaded rod zpl 4.6 din 976

Threaded rod zpl 4.6 din 976

Art. no.: 289034

M-thread. In accordance with DIN 976. Steel 4.6 bright galvanised. Deburred.

Threaded rod zpl 4.6 din 976

Clamp sleeve for steel pipes

Clamp sleeve for steel pipes

Art. no.: 3803921

The standard type. Zinc Plated Galv. Hole diameter 7 mm.

Clamp sleeve for steel pipes

Clamp sleeve for steel pipes

Rail EF Stex 45/45, MEFA

Rail EF Stex 45/45, MEFA

Art. no.: 3878593

Rail EF Stex 45/45, MEFA

Rail EF Stex 45/45, MEFA

Rail EF Stex 45/45, MEFA

Rail EF Stex 45/45, MEFA

Rail EF Stex 45/45, MEFA

Rail EF Stex 45D/90/2.0 6M A4, MEFA

Rail EF Stex 45D/90/2.0 6M A4, MEFA

Art. no.: 4024398

Stainless A4 acid-resistant Stex 45/90 double rail for suspensions of installation materials, facilitates mounting both above and below the rail.

Spacer bowl incl. clamp with 13 mm insulation, a-collection

Spacer bowl incl. clamp with 13 mm insulation, a-collection

Art. no.: 3856096

Spacer bowl incl. clamp with 13 mm insulation, a-collection

Hex bolt EF, MEFA

Hex bolt EF, MEFA

Art. no.: 3822958

Hex bolt EF, MEFA

Hex bolt EF, MEFA

Brackets J913, U-profile, Hot-dip Galvanized Fzv

Art. no.: 3820311

Material/surface treatment corrosion-free 316L .

Round iron brackets FZB, electro-galvanized

Round iron brackets FZB, electro-galvanized

Art. no.: 3819562

Clip Clamp for Plastic and Drain Pipes

Clip Clamp for Plastic and Drain Pipes

Art. no.: 3814576

For plastic waste pipes and MA pipes. The clamps are provided with a pressed out fixing lug to get the correct distance from the wall. Fixing hole 11 Ø mm. Supplied without screw and nut.

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Art. no.: 3811443

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Downpipe clamp for MA-pipe

Downpipe clamp for MA-pipe

Art. no.: 3814522

Fixing hole to wall Ø 11 mm. Lower clamp half provided with welded screw. Supplied with nut.

Downpipe clamp for plastic pipe

Downpipe clamp for plastic pipe

Art. no.: 3814564

Lighter model. Lower clamp half threaded in goods. Screw and nut are included. Material dim 20 x 2 mm with Ø 9 mm fixing hole.

Split clamp PCX, Armacell

Split clamp PCX, Armacell

Art. no.: 43724018

Clamp sleeve in copper, for copper pipes

Clamp sleeve in copper, for copper pipes

Art. no.: 3809027

Rail EF Stex 45/45/1.5mm, MEFA

Rail EF Stex 45/45/1.5mm, MEFA

Art. no.: 3878591

Rail EF Stex 45/45/1.5mm, MEFA

Plastic single clips white RYW, a-collection

Plastic single clips white RYW, a-collection

Art. no.: 3810264

Plastic single clips white RYW, a-collection

Cover lid for EF Stex 35, MEFA

Cover lid for EF Stex 35, MEFA

Art. no.: 4436194

Cover lid for EF Stex 35, MEFA

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Art. no.: 3811405

Use the a-measurement to find suitable spacer and seal. Sealing plate included for 12-15 mm.

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Plastic clamp double type Falu Snap, Faluplast

Showing 52 of 326