Special instrument

Ahlsell's wide range of electricity includes luminaires, LEDs, light sources, cables, electrical network equipment, installation equipment, switchboards, fuses, appliance cabinets, busbar distribution, automation, tools, measuring instruments, telecommunications, data, security, lighting, heating products, fans, and heated towel rails. We have everything within electricity for professionals working with electricity, including electricians, electrical installers, property managers, automation technicians, and many more. Explore our wide range of products here or visit your nearest Ahlsell store.

Products (21)
ProcessMeter 789
Fluke
ProcessMeter 789
Art. no.: 4202928
Features of Fluke 789:

24 V voltage source
Very large double display
Improved backlighting with 2 brightness settings
1200 ohm drive capacity on mA source
HART setting with circuits and a built-in 250 ohm resistor
Buttons for 0% and 100% for switching mode in the range 4-20 mA generated current for fast span check
Fuses that are easily accessible from the outside for easy replacement
IR port for data processing in FlukeView Forms software (V2.1)
The Fluke 789 has features that are also available in the Fluke 787:

Precision 1000 V, 440 mA digital multimeter for true RMS
0.1% DC accuracy
0.05% DC accuracy
Frequency measurement to 20 kHz
Min / Max / Medium / Preserve / Relative modes
Diode test and continuity signal
Simultaneous display of mA and% of scale reading
20 mA DC power source / loop calibrator / simulator
Manual stepping (100%, 25%, coarse, fine) plus automatic stepping and automatic ramp
Externally available battery for easy battery replacement
Safety Standard

Meets safety class 1000 V EN61010-1 CAT III and safety class 600 V EN61010-1 CAT IV.
Installation Tester iTest 7400
Elma
Installation Tester iTest 7400
Art. no.: 4203809
Elma iTest 7400 – Simple and accurate installation test. When you need an installation tester that is as reliable as it is easy to use, then the Elma iTest 7400 is the perfect choice. With high precision and ease of use, it is developed to help you quickly and safely verify your installations according to SS/IEC 60364-6 This means that you can trust that each installation is thoroughly tested for both function and safety 7400 as user-friendly as possible, the test function is structured intuitively: you select the function with a knob, and the arrow keys allow you to easily adjust the settings.

With Elma iTest 7400 you get:
•200mA Continuity Test: Ensures protective conductor continuity and/or equipotential bonding, and offers easy through-test/summation with low test current.
•Insulation test: Predefined test voltages from 50 V to 1000 V and adjustable limit value for precise measurements.
• Mains impedance measurement (Ikmin) and voltage drop: Built-in fuse curves with limit values ​​that quickly show whether the installation is safe. For measuring Ikmax, the fuse type can be easily deactivated.
•Fault circuit impedance and transition resistance to ground: User-friendly verification that takes into account the type of RCD, so that the JFB does not trip unnecessarily.
•JFB test of all common types of RCD: Also tests EVSE 6 mA DC, with separate test for disconnection time, ramp test and auto test.
•Measurement of voltage, frequency and phase sequence: For a complete analysis of the electrical function of the installation.

The Elma iTest 7400 is a user-friendly instrument that meets all requirements for installation testing. Supplied complete in a practical bag with test leads, test sticks, alligator clips, Schuko test cables and a Swedish manual - everything to get you started straight away.
Installation Tester iTest 7400
Test instrument 12V for trailer connector, 7-pin
CJ
Test instrument 12V for trailer connector, 7-pin
Art. no.: 9850024
Practical test instrument for 7-pin trailer connectors and sockets that quickly checks both the car and trailer electrical systems. The device connects smoothly between the trailer and car connector and provides quick feedback on the status of the connection. Perfect instrument for a quick check before departure. The interface of the instrument is easy to use and the device is compact, making it easy to use and store in the glove compartment or tool box.Powered by a 9v battery which is not included.

Scope of delivery includes the test instrument itself, 9v battery sold separately.

- compact and portable design for easy transport and storage.
- quick and easy diagnostics of both the car's and the trailer's 7-pin connector.
- battery powered for use in locations without access to an external power source.
Test instrument 12V for trailer connector, 13-pin
CJ
Test instrument 12V for trailer connector, 13-pin
Art. no.: 9850023
Practical 13-pin trailer connector and socket test instrument that quickly checks both the car and trailer electrical systems. The device connects smoothly between the trailer and car connector and provides quick feedback on the connection status. Perfect instrument for a quick check before departure. The instrument interface is easy to use and the device is compact, making it easy to use and store in the glove compartment or tool box.Powered by a 9v battery which is not included.

Scope of delivery includes the test instrument itself, 9v battery sold separately.

- compact and portable design for easy transport and storage.
- quick and easy diagnostics of both the car's and the trailer's 13-pin connector.
- battery powered for use in locations without access to an external power source.
Probe seeker Vivax vLoc3-Cam Rx
Elma
Probe seeker Vivax vLoc3-Cam Rx
Art. no.: 4203799
vLoc3-Cam is a completely unique way to find and follow probes in e.g. drains, or other pipes in terrain with very high speed and precision. It saves time when searching and excavating underground installations. Standard probes come in many designs, from our extremely small s6 probe, which is only 6 mm in diameter, to large, robust and powerful probes with very high transmission power, which can be found many meters underground. vLoc3 has many auxiliary functions and guides the user, simply, quickly and accurately, over the probe. With depth measurement, the exact location and depth can be determined before digging. Probes and probes are used e.g. in connection with sewer inspections, to find hidden pipes and wells and to map unknown pipe systems. The vLoc3-Cam is robust and waterproof IP65 and comes ready to use with batteries.
Probe seeker Vivax vLoc3-Cam Rx
Elma 6620 Process Multimeter
Elma
Elma 6620 Process Multimeter
Art. no.: 4203982
A process multimeter is an indispensable tool for the industrial electrician or technician working with control and regulation tasks, as it combines the usual measurement functions of the multimeter with the process calibrator's features of simulating signals and acting as a source in passive circuits. The Elma 6620 is a simple process thermometer in a robust and ergonomic design with a backlit display and built-in flashlight. The measurement functions include TRMS AC voltage and AC voltage with VFC filter for precise measurement on noisy and variable voltage circuits, DC voltage, resistance/continuity, diode test, frequency, and AC/DC current in mA. The Elma 6620 can simulate signals in active as well as passive circuits. In both cases, the 4-20 mA output signal can be set in steps of 25% and the current can be fine-tuned down to 0.001 mA; step and ramp functions allow automatic step or sliding control of the output current. With the Elma 6620 as a source, passive circuits can also be powered with 1-10 VDC or a frequency signal. The Elma 6620 also has a Loop power function. The Elma 6620 is delivered ready to use incl. test leads with test pins, mini crocodile clips, batteries and manual.
Elma 6620 Process Multimeter
Elma 6660 Procesmultimeter
Elma
Elma 6660 Procesmultimeter
Art. no.: 4203979
A process multimeter is an indispensable tool for the industrial electrician or technician working with control and regulation tasks, as it combines the usual measurement functions of the multimeter with the process calibrator's features of simulating signals and acting as a source in passive circuits. The Elma 6660 is an advanced process thermometer in a robust and ergonomic design with a variety of functions, high accuracy, backlit display and built-in flashlight. The measurement functions include TRMS AC voltage and AC voltage with VFC filter for precise measurement on noisy and variable voltage circuits, DC voltage, resistance/continuity, diode test, capacitance, frequency, AC/DC current in mA and temperature with thermocouples (e.g. type K sensor) and RTDs (e.g. PT100 sensor). The Elma 6660 can simulate signals in active as well as passive circuits. In both cases, the 4-20 mA output signal can be set in 25% increments and the current can be fine-tuned down to 0.001 mA; step and ramp functions allow automatic step or sliding control of the output current. Passive circuits can be supplied with the Elma 6660 as a source with 1-10 VDC, a frequency signal, resistance value and thermocouple and RTD temperature signals. The Elma 6660 also has Loop power and 250 Ω HART function. The Elma 6660 is delivered ready to use in a case including test leads with test pins, mini crocodile clips, batteries and manual.
Elma 6660 Procesmultimeter
Cable length meter ELMA 6501
Elma
Cable length meter ELMA 6501
Art. no.: 4204033
Elma 6501 is a smart cable meter. Very easy to use with the milliohm principle. You can easily use the rotary switch to select standard cable dimensions from 0.15 to 240 square and set the push button to aluminum or copper. In addition, 8 customizable cable types. The Kelvin measuring principle automatically calibrates the resistance of the test leads and clamps, which together with temperature compensation ensures accurate results. Elma 6501 is both a cable length meter and milliohm meter, with a resolution as low as 100μΩ, and can therefore also be used to measure very small resistances.

The meter measures cable lengths based on resistance, and not on TDR reflectometer technology. Then you do not need to know the NVP value, which is often unknown on various installation cables. Simply set the rotary switch to the cable dimension, mount / short-circuit two wires and connect the terminals to the de-energized cable and read the result. The length is easily calculated from the measured resistance, which is predefined for standard cable dimensions. No complicated settings, just a simple reading.

The Elma 6501 Cable Length Meter and Milliohmmeter is ready to use with 4-wire probes with crocodile clips, batteries and manual.
Cable length meter ELMA 6501
Showing 21 of 21