Order lines: 0

Ahlsell Products Electric Telecoms, Data, Security 50-63 63 Safety systemsFire alarm

Fire alarm

Door holder magnets and accessories

Signs and stickers

Fire door closing

Do you work with Telecom, Data, or security? Ahlsell helps you find the products within security and integration. Whether you work in electrical engineering, burglar alarms, or access systems, we have the range you need. Here you will find fiber optics, telephony, antenna material, and power supply for installation, along with smart solutions from major suppliers. Explore our wide selection here in the online store or visit your nearest Ahlsell store.

Products (75)

Smoke detector ECO1003

Smoke detector ECO1003

Art. no.: 6300328

SBSC-certified conventional optical smoke detector that can be connected to most fire alarm systems and other systems via relay socket. Tested with flue gas or laser pointer S300RTU (6302344). The detector's outer casing is easy to remove, which simplifies cleaning. Power consumption 45uA at rest, max 70mA in alarm.

Magnetic mount for smoke alarms

Magnetic mount for smoke alarms

Art. no.: 6302619

Magnetically self-adhesive bracket for smoke alarm a-collection.

Smoke detector 10 year battery optical with pause function

Smoke detector 10 year battery optical with pause function

Art. no.: 6302814

With this smoke alarm, which has a built-in lithium battery, you get safe operation for up to 10 years without battery replacement. Large test button with pause function. Alarm indication with LED is a visible alarm together with loud noise and 24h alarm memory which shows that the smoke alarm has been alarmed. Function indication with LED. Battery warning if voltage is too low. Dimension with one detector per 60m2 or every 12 meters. Battery lock ensures that the smoke alarm is not mounted without activating the battery. Approved according to EN14604: 2005 / AC2008. sound pressure of 85dBm at 3 meters. Comes with 10-year battery, mounting plate, screw, plug and Swedish user manual.

Smoke detector 10 year battery optical with pause function

Door holder magnet with anchor, Ateco

Door holder magnet with anchor, Ateco

Art. no.: 6306195

The door holding magnet M-CQSU M-CQSU9 is approved for fire doors according to EN1155 including CE. CPD-certified. Integrated protection diodes for managing power spikes. Centre tip with release spring prevents the door from being left in the set position due to residual magnetism. Works both for a swinging door and sliding door.
Comes complete with anchor and built-in door closing button.

Resistor for fire alarm

Resistor for fire alarm

Art. no.: 6331893

Carbon layer resistor for Voltage resistance 500 VDC. Dimensions of connecting wires ø x L 0.6 x 28 mm.

Optical smoke alarm 10-year battery connectable a-collection

Optical smoke alarm 10-year battery connectable a-collection

Art. no.: 6302618

Optical smoke detector with a test button and diode indicating function with 1 blink/min. Approved according to EN 14604:2005 + AC: 2008, with a sound pressure of 85 dBm. The safety function battery barrier ensures that the smoke detector cannot be mounted on its base plate unless the battery is in place. The optical smoke detector is best for detecting smoldering fires with visible smoke particles. Supplied with a 10-year battery, base plate, screws, plugs, and user manual. The battery is not replaceable.

Alarm button LK-5-RES complete, Ateco

Alarm button LK-5-RES complete, Ateco

Art. no.: 6300988

The fire alarm call point with built-in resistors 0 ohm, 470 ohm or 560 ohm. The supplied key is used for resetting and function test, as well as opening of the front during installation. The alarm call points come with a key and transparent protective cover. As accessories, there are a key and a protective cover. Other types of protection covers are available as separate products.
Voltage Max 30V
Max voltage 2A over contacts
Dimensions 87x87x59 mm
Temperature range: -30 to +70°C
IP class IP24
Function 0-470-680 ohm

Key test/reset LK-5-NY, Ateco

Key test/reset LK-5-NY, Ateco

Art. no.: 6301060

Key test/rest for alarm call points, LK-5.

Relay unit for 230V KI-11 BV

Relay unit for 230V KI-11 BV

Art. no.: 6304286

For controlling external equipment such as contactors, fire doors or external sirens etc. Potential-free relay, NO/NC. The relay can be configured to switch on/off for only 1 second/1 time per minute, for each minute that the smoke detector sounds an alarm. Alternatively, the relay can be configured to remain closed or open until the smoke detector power supply is interrupted at the electrical control panel, position "Long". Relay data: 2A at 230VAC / 125VDC. Compatible with 230V smoke detectors in KI-11 v2 orange, E6304282, -83, and -84.

Smoke alarm 230V OPT KI-11RL

Smoke alarm 230V OPT KI-11RL

Art. no.: 6304282

This smoke detector is connected to the 230V mains. The built-in backup battery is maintained charged by the mains voltage, which ensures operation in the event of a power failure. Connection with cable as standard and connected with phase, neutral and signal conductors, max. 2.5mm2 and 250m. If you instead want a wireless connection, you can connect the E6304285 radio module as an accessory. You cannot mix wireless and wired connections. Easy to install over a draft, on a ceiling box or surface-mounted cabling. With the FastFix system, it is easily mounted on an installed base. As additional accessories, there is a relay base for controlling external equipment such as door closers and strobe lights and the E6303351 remote control makes testing at high ceilings easier. Approved according to EN14604:2005/AC:2008 with a sound pressure of 85dBm at 3 meters. Supplied with mounting base, screw and plug, built-in rechargeable battery and Swedish user manual.
Note! This smoke alarm is not backwards compatible with smoke alarms E6303345, E6303346 or E6303347 nor with relay base E6303348 or radio module E6303349. The old mounting base can however be used.

Fire detector wireless

Fire detector wireless

Art. no.: 6302866

Wirelessly interconnectable for easy installation and high security - alarms one alarms all. EN14604:2005. Sound pressure of 85dBm at 1 meter. 15 channels of which 1 master. Recommended in multi-storey buildings and large properties. Automatic replacement alarm when the battery is exhausted. Battery lock ensures that the battery is always in place. The fire alarm can be locked in its bracket with a pin.

Fire detector wireless

Siren IP45 EN54-3, Ateco

Siren IP45 EN54-3, Ateco

Art. no.: 6301032

Siren with 32 different tone characters that can be installed indoors or outdoors. Two different bases available, IP45 or IP66. The siren is approved in accordance with EN54-3 and is CPD certified. Also suitable as combination fire alarm with 12 VDC voltage.
-Voltage: 12-24VDC
-Power consumption: Max 30 mA
- Sound nature: 32 tones (DIP switch)
-Sound strength: 81-112dBA
-Volume control: 3 steps -10 to – 20 dBA
-Dimensions: D=90 h=72 mm
-Weight: 220 g
-Temperature range: -20 to +70°C
-Approval: CPD, EN54-3

Siren IP45 EN54-3, Ateco

Alarm device Flashing siren SB-BE-EL-66

Alarm device Flashing siren SB-BE-EL-66

Art. no.: 6301035

The combined flash / siren is supplied with energy-saving LED flash. The siren has 32 different tones. Very low energy consumption. Approved according to EN 54-3 and CPD certified. Also fits well in combi fire alarms with 12 VDC voltage.

Lift equipment

Art. no.: 6308443

Lifting device for mounting of fire detectors in high or difficult to access areas.

Optical fire alarm, a-collection

Optical fire alarm, a-collection

Art. no.: 6302000

Optical fire alarm with test button and diode indicating function with 1 flash/min. Approved according to EN 14604:2005 + AC: 2008, with a sound pressure of 85dbm. The battery safety feature ensures that the fire detector can not be mounted on its mounting plate unless the battery is in place. Optical fire detectors have an advanced photocell system that detects smoke particles. The optical fire detector is best with regard to detecting smouldering fires with visible smoke particles. Supplied with 1 year battery, mounting plate, screw, plug and operating instructions.

Decal sticker Fire alarm 25x15 (48 stickers)

Decal sticker Fire alarm 25x15 (48 stickers)

Art. no.: 6308414

Decal 25x15 red, 48, fire alarm.

Door holder magnet assembly, Ateco

Door holder magnet assembly, Ateco

Art. no.: 6300011E

The door holding magnet M-CQK is approved for fire doors according to EN1155 including CE. CPD-certified. Integrated protection diodes for managing power spikes. Centre tip with release spring prevents the door from being left in the set position due to residual magnetism.
Supplied with a flexible anchor, door magnet with M8 centre hole, M8 screw, separate bottom plate, and 3 screws for possible attachment of the bottom plate in the magnet if needed.

Magnetic anchor El & Mek, Ateco

Magnetic anchor El & Mek, Ateco

Art. no.: 6306452

Magnetic anchor is used together with door holder magnet

Fire door closing kit BAC-1A-KIT, Ateco

Fire door closing kit BAC-1A-KIT, Ateco

Art. no.: 6301621

Fire door closing control unit BDC-1A in a complete kit for controlling magnetically mounted doors via smoke detectors. The control panel can control one or two doors with time delay for double doors. Detector loop with monitoring and final resistance. Siren outputs for fixed or pulsating voltage. Space for battery backup in the enclosure (not included, see accessories) The unit is protected against overload and short circuits Built-in protection against deep discharge of the batteries. The mains and battery are protected by fuses.
Consists of: BDC-1 E6301620 Fire door closing center 1 pc, SM-RD E6303000 Smoke detector 2 pcs, SM-S24 E6303006 Base 2 pcs, M-CQSU E6306195 Door holder magnet 1 pc, TK-1U E6300986 Pushbutton, 1 pc. Backup batteries are ordered separately.

Fire alarm optical Longlife Nexa

Fire alarm optical Longlife Nexa

Art. no.: 6301186

Optical smoke alarm" 10-year ". Battery life depends on ambient temperature, environments, etc., and can therefore vary between 8-10 years. Detects both visible and invisible smoke. Responds quickly. 9V standard battery included. Dual function check, both turn signal ( LED) and test button. Warning signal at low battery. Safety function: can not be mounted in the roof bracket if battery is missing. Quick, easy installation. Gentle on the environment - contains no radioactive substance.

Fire protection key

Fire protection key

Art. no.: 6308878

The fire brigade key for the fire brigade lock in accordance with Swedish standards

Fire protection key

Fire detector, wireless, KI-9XRLB, Kamic

Fire detector, wireless, KI-9XRLB, Kamic

Art. no.: 6302876

Wireless fire alert, with 10-year battery.
All units communicate wirelessly. When a detector sounds the alarm,a coded alarm signal is sent to all units in the system within radio range. The range can be doubled with the repeat function. The built-in 10-year battery guarantees operation for at least ten years. Detectors set on the omni-channel ‘0’can also send and receive signals from all the other channels; this is ideal if surveillance is desired in common spaces such as stairs or cellars, etc. With a total of 240 channels, this detector can be used in large tenements without risk of overhearing.
16x15 channels and 1 omnichannel.
Range 200m with repeater.
Built-in 10-year lithium battery.
Very easy installation.
Noise memory and noise identification.
Approved in accordance with SS- EN 14604-2005/AC 2008.
Supplied with: built-in 10-year lithium battery, bolts,screws, and instructions in Swedish.

Pushbutton for closing fire doors, Elko

Pushbutton for closing fire doors, Elko

Art. no.: 6301111

Fire door closer Stairs/1-pole 16/230V with screw connection for surface mounting. Mountain white. Made of halogen-free thermoplastic. Alternating contact with impulse function. Impulse springs and connection can be adapted for both closing and breaker functions. Used for manual closing of fire doors. Assembly depth 17 mm.

Pushbutton for closing fire doors, Elko

Fire brigade key BN-3

Fire brigade key BN-3

Art. no.: 6300867

Fire brigade key made of metal. Adds dimensions according to Swedish standard SS3654.

Broken glass for alarm button

Broken glass for alarm button

Art. no.: 6308598

Spare glass 5-pack for alarm buttons type LK o The article number refers to 5-pack Dimensions 76x40 mmo Fits e.g. alarm button make KAC.

Sign plate evacuation 112, Ateco

Sign plate evacuation 112, Ateco

Art. no.: 6308400

Sign 90x60 green, evacuation 112

Sign plate Evacuation Auto, Ateco

Sign plate Evacuation Auto, Ateco

Art. no.: 6308401

Sign 90x60 green, evacuation auto

Sign plate Fire alarm 80x50, Ateco

Sign plate Fire alarm 80x50, Ateco

Art. no.: 6308402

Sign 80x50 red, fire alarm

Sign plate Fire alarm 210x150, Ateco

Sign plate Fire alarm 210x150, Ateco

Art. no.: 6308403

Sign 210x150 red, fire alarm

Sign plate Evacuation alarm 160x50, Ateco

Sign plate Evacuation alarm 160x50, Ateco

Art. no.: 6308408

Sign 160x50 red, evacuation alarm

Downward suspension device, Ateco

Downward suspension device, Ateco

Art. no.: 6308444

Downhill device for mounting of fire detectors
in ceilings between 7 and 16 metres

Fire folder A3/A4 Red, Ateco

Fire folder A3/A4 Red, Ateco

Art. no.: 6308437

Folder for orientation and service drawings in format A4 or weight A3

Testing gas for smoke detector, Ateco

Testing gas for smoke detector, Ateco

Art. no.: 6308446

Test gas of smoke detectors and sampling system in the vial 70 grams.
Suitable for telescopic rod 6300351

Door holder magnet for frame Elec. & Mech., Ateco

Door holder magnet for frame Elec. & Mech., Ateco

Art. no.: 6306450

Door holder magnet with central screw.

Door holder magnet for wall Elec. & Mech., Ateco

Door holder magnet for wall Elec. & Mech., Ateco

Art. no.: 6306451

Door magnet with 4 fixing holes

Bracket swing door, Ateco

Bracket swing door, Ateco

Art. no.: 6306454

Angle bracket for fire door is suitable for e.g. magnet M CQK, M-CQM8 and M-711.

Pushbutton fire alarm, Ateco

Pushbutton fire alarm, Ateco

Art. no.: 6300986

Spring-back push button with "branddörrstägning [fire door closing system]" label for automatic doors, fire doors, buzzers etc.

Angle bracket for door magnet Ateco

Angle bracket for door magnet Ateco

Art. no.: 6300008E

Angle bracket CQ for fire doors.

Detector and relay base SM, Ateco

Detector and relay base SM, Ateco

Art. no.: 6303001

Optical smoke detector for combo alarm. Approved in accordance with EN54-7.
Used in spaces with maximum ceiling height of 20 m.
Monitored surface of 100 sqm. Indication via light conductors in alarm mode.

Fire detector optical 9V pause Kamic

Fire detector optical 9V pause Kamic

Art. no.: 6302812

With a test button for function checking and a diode that indicates full function with 1 blink/min. Approved according to EN14604:2005 with a sound pressure of 85dBm at 3 metres. With the pause function, the sensitivity can be temporarily lowered to avoid undesired alarms during e.g. cooking. With a pin, you can ensure that the fire alarm cannot be removed from its mount. The battery lock ensures that the fire alarm cannot be mounted without a battery. Delivered with 9V batteries, black fixing plate that is clearly visible if the fire alarm is missing (fixing distance 30-75mm), screws and 5mm plug and instructions in Swedish.

Smoke detector SM, Ateco

Smoke detector SM, Ateco

Art. no.: 6303000

Optical smoke detector for conventional systems. CPD-approved in accordance with EN54

Fire detector 9V Lithium battery UltraLIfe, Kamic

Fire detector 9V Lithium battery UltraLIfe, Kamic

Art. no.: 6302802

The 9V UltraLife battery ensures long and economically viable operation with minimum maintenance. The battery ensures an operating time of between 5-8 years. A pin that is included ensures that the fire alarm cannot be removed from its mounting bracket. The battery lock means that the fire alarm cannot be mounted without a battery.

Protective glass LK-5-Glass Ateco

Protective glass LK-5-Glass Ateco

Art. no.: 6301061

Protective glass for LK 5 alarm call point, accessory.

Battery for BDC-1A, Ateco

Battery for BDC-1A, Ateco

Art. no.: 6301669

Battery backup for fire door closing center BDC-1A

Optical smoke detector 10-year battery, a-collection

Optical smoke detector 10-year battery, a-collection

Art. no.: 6302001

Optical smoke detector with test button and diode indicating function with 1 blink /min. Approved according to EN 14604:2005 + AC: 2008, with a sound pressure of 85dbm. The battery lock safety function ensures that the smoke detector cannot be mounted on its mounting plate unless the battery is in place. Optical smoke detectors have an advanced photocell system that detects smoke particles. The optical smoke detector is best when it comes to detecting smoldering fires with visible smoke particles. Comes with 10 years battery, mounting plate, screw, plug and user manual.

Alarm button LK-5-RES complete, Ateco

Alarm button LK-5-RES complete, Ateco

Art. no.: 6301056

The fire alarm call point with built-in resistors 0 ohm, 470 ohm or 560 ohm. The supplied key is used for resetting and function test, as well as opening of the front during installation. The alarm call points come with a key and transparent protective cover. As accessories, there are a key and a protective cover. Other types of protection covers are available as separate products.
Voltage Max 30V
Max voltage 2A over contacts
Dimensions 87x87x59 mm
Temperature range: -30 to +70°C
IP class IP24
Function 0-470-680 ohm

Alarm button LK-5-RES complete, Ateco

Alarm button LK-5-RES complete, Ateco

Standard base ECO1000BR470

Standard base ECO1000BR470

Art. no.: 6300332

Relay base replaces the following mounting bases for fire alarms E6303417, E6303421 or heat detector E63 034 22. The relay is alternating, NO/C/NC, with max. load 2A at 230V AC or 125V DC. In the event of an alarm, the relay is activated, which can then control external units such as for e.g. sirens,
door closers, contactors and flashing lights.

Fire alarm panel ZX-842, Ateco

Fire alarm panel ZX-842, Ateco

Art. no.: 6301881

The ZX-842 conventional fire alarm centre has been developed for both installers and end customers
with efficiency in mind.
The centre offers technically-advanced features while still remaining easy to install,
program, and operate.
The ZX-842 is ideal for applications such as offices, shops, public buildings, motels, restaurants, daycare, etc. where there is no requirement for addressable systems. Complies with standard EN54 2 and 4.

Smoke detector optical S65

Smoke detector optical S65

Art. no.: 6309910

S65 is an optical 4-wire smoke detector (without siren) with relay socket, Works normally for all control panels

Boom key 205

Art. no.: 6302798

Key for boom with extra long shaft.

Adapter plate MFX Deltronic

Adapter plate MFX Deltronic

Art. no.: 6302714

Adapter that fits on Deltonic's previous smoke alarms with designations starting with B, D, H, P, and S.

Smoke detector X10, optical, 10 years

Smoke detector X10, optical, 10 years

Art. no.: 6302713

Smoke detecto X10 is the latest generation of fire alarms with safety and ease of use in focus. The fire alarm has a built-in battery with a guaranteed life of 10 years, which means that the user does not have to think about the battery change. 10-year warranty and various innovative features such as multiple mounting possibilities, automatic start-up during assembly, break function, built-in insect protection, self-monitoring, the fire alarm is very reliable and easy to use. When mounting over an existing bracket, the MFX adapter plate (63 027 14) can be used.

Showing 52 of 75