Order lines: 0

Ahlsell Products Electric Telecoms, Data, Security 50-6363 Safety systems

63 Safety systems

Alarm coupling equipment

Alarm communication

Camera surveillance

Do you work with Telecom, Data, or security? Ahlsell helps you find the products within security and integration. Whether you work in electrical engineering, burglar alarms, or access systems, we have the range you need. Here you will find fiber optics, telephony, antenna material, and power supply for installation, along with smart solutions from major suppliers. Explore our wide selection here in the online store or visit your nearest Ahlsell store.

Products (189)

Magnetic contact set MC 240-S78, Alarmtech

Magnetic contact set MC 240-S78, Alarmtech

Art. no.: 6332709

Magnetic contact set in solid aluminium to cope with tough environments and environmental stresses in the form of moisture and gases and long-term hard pressures without corrosion. Suitable for example for steel or iron doors/gates etc. The contact and the magnet section are 74x30x30mm. The extra strong magnet and the high placement, far from the point of attachment gives a big gap even with magnetic materials. The set consists of MC 240-C, MC 200-7 Al enclosure and MC 200-8 magnetic part and MC T4, 1 m reinforced hose.

Resistor for fire alarm

Resistor for fire alarm

Art. no.: 6331893

Carbon layer resistor for Voltage resistance 500 VDC. Dimensions of connecting wires ø x L 0.6 x 28 mm.

Alarm transmitter/relay Ontech 9060

Alarm transmitter/relay Ontech 9060

Art. no.: 6390549

Ontech 9060, the successor to 6390292 (Ontech GSM 9040) alarm transmitter and remote relay (230V socket 16A 230V) that communicates via the 4G mobile network. Cash cards can be used, Switched unit. Overheat protection by software, turns off the relay if it gets over 70 degrees inside the unit. Programmed via the Ontech Control portal. Can control up to 7 additional relays (Ontech GSM Relay 9010, (63 904 52)) with a short-range radio. Duplex function on additional relays that can also be controlled with a timer function. Two alarm inputs (NO or NC). Alarms with SMS according to programmable phone list. Indicates the current temperature. Frost monitor that automatically alarms above or below the set temperature. External temperature sensor as accessory. Can be used as a thermostat, i.e. set temperature controls the relay. Internal extra battery included. Warns with the battery connected in the event of a power failure and when the power returns.

Alarm pack Neo, Teletec

Alarm pack Neo, Teletec

Art. no.: 6309315

Alarm packet Neo for up to 64 sections. Keypad HS2LCDRF with Text display and built-in radio transceiver included. Suitable for both businesses and exclusive houses. Choose detectors and accessories, wired and/or wireless depending upon what suits each particular installation. The alarm packet has in its basic form 7 or 9 Wired sections which can be combined with wireless units up to a total of 16 or 64 sections. In order to use more wired sections a sectioning card is required.

Alarm package Classic Pack 64

Alarm package Classic Pack 64

Art. no.: 6310345

Teletec Classic Pack 64 contains alarm transmitter TL280LE (IP/4G), central unit NEO 2064 in sheet metal housing, keypad HS2LCDRF with text display and radio receiver. Transformer, battery, 1 magnetic contact (MC440), 1 IR (Optex FLX-ST) & indoor siren (SD-110).

Alarm button LK-5-RES complete, Ateco

Alarm button LK-5-RES complete, Ateco

Art. no.: 6300988

The fire alarm call point with built-in resistors 0 ohm, 470 ohm or 560 ohm. The supplied key is used for resetting and function test, as well as opening of the front during installation. The alarm call points come with a key and transparent protective cover. As accessories, there are a key and a protective cover. Other types of protection covers are available as separate products.
Voltage Max 30V
Max voltage 2A over contacts
Dimensions 87x87x59 mm
Temperature range: -30 to +70°C
IP class IP24
Function 0-470-680 ohm

Detector seismic GM 730, Vanderbilt

Detector seismic GM 730, Vanderbilt

Art. no.: 6337796

Seismic detector in low profile design for use on steel or concrete. 24-hour monitoring of safe, ATMs, service boxes and ticket and automated teller machines. Individual programming with SensTool software. Simple test of installation and function with GMXS1 test transmitter (separate accessory). SENSTEC ® Bimorph sensor and intelligent microprocessor-based signal treatment.

Siren ECO-1S for outdoor installation, Teletec

Siren ECO-1S for outdoor installation, Teletec

Art. no.: 5374265

Siren made of a strong white sabotage protected metal cover with a high frequency pulsating tone.

Sign plate evacuation 112, Ateco

Sign plate evacuation 112, Ateco

Art. no.: 6308400

Sign 90x60 green, evacuation 112

Sign plate Evacuation Auto, Ateco

Sign plate Evacuation Auto, Ateco

Art. no.: 6308401

Sign 90x60 green, evacuation auto

Sign plate Fire alarm 80x50, Ateco

Sign plate Fire alarm 80x50, Ateco

Art. no.: 6308402

Sign 80x50 red, fire alarm

Sign plate Fire alarm 80x50, Ateco

Sign plate Evacuation alarm 160x50, Ateco

Sign plate Evacuation alarm 160x50, Ateco

Art. no.: 6308408

Sign 160x50 red, evacuation alarm

Decal sticker Fire alarm 25x15 (48 stickers)

Decal sticker Fire alarm 25x15 (48 stickers)

Art. no.: 6308414

Decal 25x15 red, 48, fire alarm.

Lift equipment

Art. no.: 6308443

Lifting device for mounting of fire detectors in high or difficult to access areas.

Fire protection key

Fire protection key

Art. no.: 6308878

The fire brigade key for the fire brigade lock in accordance with Swedish standards

Fire protection key

Downward suspension device, Ateco

Downward suspension device, Ateco

Art. no.: 6308444

Downhill device for mounting of fire detectors
in ceilings between 7 and 16 metres

Fire folder A3/A4 Red, Ateco

Fire folder A3/A4 Red, Ateco

Art. no.: 6308437

Folder for orientation and service drawings in format A4 or weight A3

Testing gas for smoke detector, Ateco

Testing gas for smoke detector, Ateco

Art. no.: 6308446

Test gas of smoke detectors and sampling system in the vial 70 grams.
Suitable for telescopic rod 6300351

Door holder magnet for frame Elec. & Mech., Ateco

Door holder magnet for frame Elec. & Mech., Ateco

Art. no.: 6306450

Door holder magnet with central screw.

Door holder magnet for wall Elec. & Mech., Ateco

Door holder magnet for wall Elec. & Mech., Ateco

Art. no.: 6306451

Door magnet with 4 fixing holes

Magnetic anchor El & Mek, Ateco

Magnetic anchor El & Mek, Ateco

Art. no.: 6306452

Magnetic anchor is used together with door holder magnet

Bracket swing door, Ateco

Bracket swing door, Ateco

Art. no.: 6306454

Angle bracket for fire door is suitable for e.g. magnet M CQK, M-CQM8 and M-711.

Detector seismic GM 775, Vanderbilt

Detector seismic GM 775, Vanderbilt

Art. no.: 6337782

.The GM 775 seismic detector replaces the GM 770 and is identical with it, except that the GM 775 has an extra electronic output. The GM 775 is primarily used to protect vaults and safes of concrete. It can detect attempted attacks by all currently known methods within a 5-metre radius on concrete. Naturally it can also be used to protect steel objects, as well as safes made of composite material.
For the GM 775 various accessories are available, such as the GMXP 0, E63 330 32, mounting plate, for use when the detector is to be used on uneven surfaces. The detector is programmed on-site with DIP switches, or preferably with the GMSW 7 PC software, E63 378 12, which makes programming more precise and comprehensible.

Telecoms terminal 10 pair, slot/slot

Telecoms terminal 10 pair, slot/slot

Art. no.: 5015292

Terminal block with slot terminals (LA) for 0.4-0.7 wire diameter (area 0.12-0.4 mm2 for multi-strand wire), 10 pole pairs. Fits Fatum module box and in Fatum sheet metal range 3201.02-3210.02. Supplement with sign terminal 3131.01 (E-no. 5015386). Also available as complete product, see 4101.2201 (Eno. 5015428).

Alarm box 10 pair with tamper-proof contact, Fatum

Alarm box 10 pair with tamper-proof contact, Fatum

Art. no.: 5015428

Separate connecting terminal for inbound and outbound cable and terminals for tamper contact and shield connection.

Alarm box 10 pair with tamper-proof contact, Fatum

Alarm box 10 pair with tamper-proof contact, Fatum

Junction box plastic 1 terminal block

Junction box plastic 1 terminal block

Art. no.: 5015528

Robust box in white halogen-free/flame-proof plastic in accordance with UL94-V0 standard. Suitable for 1 Fatum module terminal blocks. Hole in the lid to make signing plate visible. The plate is snapped into place on the terminal with art. no. 3131.01 (5015386). Size 133x72x50mm. The box can be supplemented with terminal spaces 12 or 15 mm high 2591.12 (5015372), 2591.15 (5015374) plus stackable wall spacers 6 mm or 13 mm long 2581.06 (5015236), 2581.13 (5015238) and wall signing plate/marking plate 3132.01 (5015560).

Junction box plastic 1 terminal block

Sign labelling

Art. no.: 5015386

The signing terminal is used for documentation and identification. Remains on the terminal when the cover of the box is lifted away.

Alarm box Fatum Mini with tamper-proof contact

Alarm box Fatum Mini with tamper-proof contact

Art. no.: 5015200

Complete product in a little white box made of UL94-V0 plastic (flame-proof and halogen-free) in a stable thickness. The junction box can be supplemented with stackable wall spacers 6 mm or 1 3 mm long; see 2581.06 (Eno. 5015236 or 2581.13 (Eno. 5015238) plus small wall signing plate; see 3132.01 (Eno. 5015560).

Alarm box Fatum Mini with tamper-proof contact

Alarm box Fatum Mini with tamper-proof contact

Alarm box Fatum Mini with tamper-proof contact

Alarm box Fatum Mini with tamper-proof contact

Alarm box Fatum Mini with tamper-proof contact

Alarm transmitter Airborne DC, AddSecure

Alarm transmitter Airborne DC, AddSecure

Art. no.: 6390330

Alarm transmitter approved for alarm transmission in accordance with 130:8 Alarm class 1-2 as well as Fire SBF110:6. Digitisation of alarm protocol SIA,CID Robofon, with 2x digital in/outputs and serial communication capabilities. Only alarm transmitter card, antenna and mounting components.

Alarm transmitter Airborne DC, AddSecure

Expansion unit SPC E652 8 in-sockets / 2 out-sockets, Vanderbilt

Expansion unit SPC E652 8 in-sockets / 2 out-sockets, Vanderbilt

Art. no.: 6331047

SPC E652 is an expansion unit for the development of SPC centres. Each expansion unit has 8 section inputs and 2 relay outputs. The unit is supplied in a plastic enclosure with plenty of coupling space. The unit is connected to the XBus-loop and can be addressed manually or automatically. The enclosure has a small window shows the "heart beat" LED diode. SPC E652 is suitable for all central apparatus in the SPC-series.
Technical data SPC E652
Art.no.: S54542-F106-A100

Alarm panel LAN 63 & LAN 64, Rutab

Alarm panel LAN 63 & LAN 64, Rutab

Art. no.: 6390202

LAN 63 includes programmability for operation or alarms as a standard feature.
LAN 64 (Slave panel)
Connection of a master panel and slave panel is quick and easy with the flat cable included with the LAN 64 slave panel. Group alarms from all slaves are indicated and acknowledged on the LAN 63 master panel.

• Small format, only 129 x 70 x 27 mm (recess depth 20 mm).
• 12 alarm inputs:
• All incoming cables are connected to plug-in screw blocks, which simplifies the installation process.
• 2 potential-free switching group alarm outputs, priority A or B.
• LED indication on the module front.
• Each alarm input is individually programmable:
• Alarm delay up to 60 minutes.
• for closing or breaking alarm contacts (NO/NC).
• selectable as alarm (red diode) or operation indication (yellow diode).
• All alarm inputs have memory and blink functions.
• The front of the panel is equipped with reset and LED test.
• Buzzer alarm outputs trigger an alarm in case of voltage loss.
• May be combined with a relay box (LAN 65-2), which provides 12 galvanically free contacts for parallel alarm transmission.

Alarm transmitter Airborne DC Dual, AddSecure

Alarm transmitter Airborne DC Dual, AddSecure

Art. no.: 6390333

Alarm transmitter for alarm transmission where there is a need or requirement for alarm communication via two independent alarm transmission routes. The Airborne DC Dual uses the mobile telephone network along with a fixed IP connection to attain maximum availability and security. The Airborne DC Dual is also designed for serial transmission, e.g. of SIA from burglar alarm central units or ESPA-444 protocol from fire alarm systems. Dial-up protocols based on tone signalling, such as SIA, Contact-ID, and Robofon, are digitalised before alarm transmission. With 16 inputs and 4 relay outputs, the transmitter covers most needs for reliable alarm transmission. Medium and Large are enclosed, the Medium without battery.

Alarm transmitter Airborne DC Dual, AddSecure

Magnetic contact AL-1, Teletec

Magnetic contact AL-1, Teletec

Art. no.: 6332264

Surface mounted magnetic contact with 85 cm cable. Made in encased aluminium and can be used in more severe environments.

Siren SD-110W, Teletec

Siren SD-110W, Teletec

Art. no.: 5374262

Electronic siren in white sabotage proof plastic casing. For indoor mounting.

Alarm sign, Teletec

Alarm sign, Teletec

Art. no.: 6348077

Double sided alarm sign, available as self adhesive or holed for quick placement, see below under design.

Pushbutton for closing fire doors, Elko

Pushbutton for closing fire doors, Elko

Art. no.: 6301111

Fire door closer Stairs/1-pole 16/230V with screw connection for surface mounting. Mountain white. Made of halogen-free thermoplastic. Alternating contact with impulse function. Impulse springs and connection can be adapted for both closing and breaker functions. Used for manual closing of fire doors. Assembly depth 17 mm.

Pushbutton for closing fire doors, Elko

Camera signs, Teletec

Camera signs, Teletec

Art. no.: 6389460

Camera sign, double-sided.

Door holder magnet with anchor, Ateco

Door holder magnet with anchor, Ateco

Art. no.: 6306195

The door holding magnet M-CQSU M-CQSU9 is approved for fire doors according to EN1155 including CE. CPD-certified. Integrated protection diodes for managing power spikes. Centre tip with release spring prevents the door from being left in the set position due to residual magnetism. Works both for a swinging door and sliding door.
Comes complete with anchor and built-in door closing button.

Door holder magnet assembly, Ateco

Door holder magnet assembly, Ateco

Art. no.: 6300011E

The door holding magnet M-CQK is approved for fire doors according to EN1155 including CE. CPD-certified. Integrated protection diodes for managing power spikes. Centre tip with release spring prevents the door from being left in the set position due to residual magnetism.
Supplied with a flexible anchor, door magnet with M8 centre hole, M8 screw, separate bottom plate, and 3 screws for possible attachment of the bottom plate in the magnet if needed.

Pushbutton fire alarm, Ateco

Pushbutton fire alarm, Ateco

Art. no.: 6300986

Spring-back push button with "branddörrstägning [fire door closing system]" label for automatic doors, fire doors, buzzers etc.

Angle bracket for door magnet Ateco

Angle bracket for door magnet Ateco

Art. no.: 6300008E

Angle bracket CQ for fire doors.

Detector and relay base SM, Ateco

Detector and relay base SM, Ateco

Art. no.: 6303001

Optical smoke detector for combo alarm. Approved in accordance with EN54-7.
Used in spaces with maximum ceiling height of 20 m.
Monitored surface of 100 sqm. Indication via light conductors in alarm mode.

IR-Detector PDM I12, Vanderbilt

IR-Detector PDM I12, Vanderbilt

Art. no.: 6309076

MAGIC motion detector PDM-I has a modern and elegant design. It suits all imaginable types of installations. With a further developed Visatec algorithm and the patented MAGIC mirror that provides reliable detection of intruders and highest security against unauthorised alarm. With an installation concept which has the installer in mind, with a new time test procedure and a new EOL system, the installation time is amazingly short.

Alarm transmitter Neo TL280, Teletec

Alarm transmitter Neo TL280, Teletec

Art. no.: 6309319

Integrated alarm transmitter TL280 for IP-communication via a fixed network to Neo alarm system. Full support for DLS-remote programming. Manages the alarm formats SIA and Contact ID. Even has support for Neo camera detector for sending images to the Emergency service centre. Is mounted in the central unit’s main casing and is connected simply with quick-release coupling. Power consumption: 100 mA.

Alarm transmitter Neo TL280, Teletec

Sectioning card Neo, Teletec

Sectioning card Neo, Teletec

Art. no.: 6309320

HSM2108 is a sectioning card for Neo alarm system. Builds out the alarm system with 8 wired sections per card. Fully programmable, double balanced systems. Max number of section cards in a system: 15 for HS2128, 7 for HS2064, 3 for HS2032 and 1 for HS2016. supplied without casing and is mounted either in it’s own casing or in the central unit’s main casing.

Keypad HS2LCD NEO, Teletec

Keypad HS2LCD NEO, Teletec

Art. no.: 6309324

Keypad with text display for Neo alarm system. Large blue LCD-display with Swedish text. Free programmable text for sections/alarm areas. The action history can be read on the display. Has 5 function buttons for short commands, 3 emergency buttons and a screw connector which can be used as a wired section input or PGM output.

Magnetic contact wireless Neo, Teletec

Magnetic contact wireless Neo, Teletec

Art. no.: 6309340

Magnet contact with alarm input, for Wireless expansion of Neo alarm system. Uses PowerG technology which manages distances of up to 2km in the open air. Can even be used as a universal transmitter since it has a screw connector for external wired transmitter. The input can be programmed to handle broken or terminal alarm functions. Battery time: 8 years (usually). Battery type (included): 3V CR123A Lithium battery

MC 440 Magnetic contact, Alarmtech

MC 440 Magnetic contact, Alarmtech

Art. no.: 6309310

MC 440 is a magnetic contact for surface mounting with separate relay for alarm and tamper with the NC feature that can be used in both alarm and access control systems for surveillance of e.g. doors and windows against unauthorized opening. For quick and easy assembly, it has screw terminal with wire protection. With the supplied plastic spacers the contact can be mounted on steel, and there are different types of mounting angles and extra strong magnet.
Dimensions contact element/magnet part (WxHxD): 65x21x15 mm/ 64x14x10 mm

MC 440 Magnetic contact, Alarmtech

MC 446 Magnetic contact, Alarmtech

MC 446 Magnetic contact, Alarmtech

Art. no.: 6332817

MC446 is a magnet contact for surface mounting with AC (NC/NO) function that can be used for both alarm and access control systems. The connector has tamper protection for the lid. For quick and easy assembly, it has screw terminal with wire protection. With the supplied plastic spacers the contact can be mounted on steel, and there are different types of mounting angles and extra strong magnet. Alarm Class 3.

Alarm device Flashing siren SB-BE-EL-66

Alarm device Flashing siren SB-BE-EL-66

Art. no.: 6301035

The combined flash / siren is supplied with energy-saving LED flash. The siren has 32 different tones. Very low energy consumption. Approved according to EN 54-3 and CPD certified. Also fits well in combi fire alarms with 12 VDC voltage.

Fire detector wireless

Fire detector wireless

Art. no.: 6302866

Wirelessly interconnectable for easy installation and high security - alarms one alarms all. EN14604:2005. Sound pressure of 85dBm at 1 meter. 15 channels of which 1 master. Recommended in multi-storey buildings and large properties. Automatic replacement alarm when the battery is exhausted. Battery lock ensures that the battery is always in place. The fire alarm can be locked in its bracket with a pin.

Fire detector wireless

250-series Magnetic contact, Alarmtech

250-series Magnetic contact, Alarmtech

Art. no.: 6332720

MC 250 is a magnetic contact in a small size with NC function that can be used in both alarm and access control systems for surveillance of e.g. doors, gates and windows against unauthorised opening. Both the contact and magnetic parts are made of metal and are designed as a screw with threads, which allows for easy installation in wood or plastic. Using different installation accessories, it is easy to install the contact in different types of doors and windows. The products are SBSC-approved in accordance with MC 250/MK 250.

Showing 52 of 189