Ahlsell – We make it easier to be professional
Order lines: 0
Quick order
AhlsellProductsElectricTelecoms, Data, Security 50-63

Telecoms, Data, Security 50-63

50 Telecoms and Fibre optic
51 Network material for data
52 Power supply
53 Batteries, signal sensors
55 Optical signal systems
57 Telephony, data
58 Access systems, entryphone systems
60 Antenna equipment
50/60 Mobile telecommunications equipment
62 Sound and time distribution
63 Safety systems

Do you work with Telecom, Data, or security? Ahlsell helps you find the products within security and integration. Whether you work in electrical engineering, burglar alarms, or access systems, we have the range you need. Here you will find fiber optics, telephony, antenna material, and power supply for installation, along with smart solutions from major suppliers. Explore our wide selection here in the online store or visit your nearest Ahlsell store.

Products (1684)
Jumpstarter Ironside 4in1
Jumpstarter Ironside 4in1
Art. no.: 77693168
This is a 4-in-1 jump starter that combines the functionality of a compressor, power bank, and flashlight. The device is designed to meet various needs, such as starting cars and other vehicles with 12V electrical systems, pumping tires, and much more. The unit offers a maximum peak current of 150 amperes and can handle petrol engines up to 5.5 liters and diesel engines up to 3.5 liters. The integrated compressor can be used for inflating tires and balls. The power bank, with a capacity of 800mAh, can charge electronic devices via USB. Its built-in 100-lumen LED light can function as a flashlight when light is needed.

Included accessories: 4 nozzles for the compressor and extender. Smart clamps jumper cables. Jumper cables. USB cable for charging. Delivered in an EVA case with a manual.

- Battery Capacity: 800mAh
- Max Starting Current: 150A
- Adjustable Pressure: .2 - 9.9 Bar
- USB-C Input: 5V/2A
- Charging Time: Approximately 4-5 hours
- USB-A Output: 5V/2A
- Car Starting Voltage: 12V
AIRKEY Starter Kit
AIRKEY Starter Kit
Art. no.: 98300243
If you want to easily get started with an AirKey system, we recommend the starter package. Lock system where permissions are sent via the internet, Cloud service with the highest security. The rights are in the lock. No license fees. No peripherals. Low initial cost. With AirKey, your smartphone becomes a key. It gives you control over passages in your doors and increases the security and flexibility of your electronic locking system. You need an AirKey cylinder, a mobile phone and a computer with an internet connection, then you can send keys in the form of text messages (SMS) and manage your electronic locking system online. Smart simple! AirKey cylinders are approved for both indoor and outdoor use. Open with mobile phone or key fob. Clear signals communicate the cylinder's status. They are the central safety product of the AirKey system and are equipped with features such as core pull and drill protection, torsional dampers and an integrated security element for secure data storage.The cylinder construction follows Swedish standards, which makes the cylinder easy to install. Powered by 2 included CR2 batteries. Cylinder with 6 keycredits and three passer tags and an easy-to-understand manual in Swedish. Clear signals tell about the status of the cylinder. It also comes with an installation tool to assemble the AirKey cylinder. AirKey cylinders are approved for both indoor and outdoor use. They form the central security product of the AirKey system and are equipped with features such as core pull and drill protection, anti-torque and an integrated security element for secure data storage. The cylinder construction follows the Swedish standard, which makes the cylinder easy to install.

Reading technology: BLE/NFC
Replaces mechanical Cylinder
Certified according to SSF3522
Easy installation and customization
Drill and Core pulling protection
Suitable for outdoor use
IP65 | -20 °C to +55 °C
Transformer PSS 230V/24V for DIN rail or screw fastening
Tufvasson
Transformer PSS 230V/24V for DIN rail or screw fastening
Art. no.: 5204316
Protective transformer according to EN 61 558 in class II for use in isolation or an inefficient insulated system where U = 50V alternating current. The transformers are designed with safety separation between the primary and secondary windings and intended for the supply of SELV and PELV circuits. The transformers are CE-marked and meet the applicable LVD and EMC requirements and insulation requirement class III that are 4kV.
Transformers are nested within the cover of the light grey UV resistant self-fading thermoplastic and fitted with plastic bushings > IP44, breakout openings < IP40.
The secondary voltage varies linearly with the load and the nominal voltage is indicated in the event of 100% load, the transformer must never be overloaded, but can cope with a temporary start current of 300% for 10 s.
The transformer is intended for use in appropriate areas such as supply voltage of the actuator control, thermostats, light and sound signals.
Safety transformer Type LF 230-250/24 V stationary IP44
Noratel
Safety transformer Type LF 230-250/24 V stationary IP44
Art. no.: 5202276
1-phase transformer, in design in accordance with EN61558-2-6. Compact, robust construction for industrial applications that is resistant to moisture, dust and vibrations. Low noise level. Embedded in self-extinguishing polyurethane with external cover made of plastic. Class ll, double-insulated. Short-circuit-proof and protected against overload with glass tube fuse and a built-in "one cut" thermal fuse. Surface mounting fixing holes for permanent installation. Connection to screw terminals easily accessible under cover. Cable glands and details cable relief are included upon delivery. The output voltage can be regulated by means of connection to terminals for 230 or 250V on the primary side. CE certified. Application areas: Power supply for control and regulation equipment, locking and alarm installations, heat foil or - cable, halogen lighting and other installations for extra low-voltage (power supply to SELV and PELV circuits). For fixed installation.
Smoke alarm 230V OPT KI-11RL
Kamic
Smoke alarm 230V OPT KI-11RL
Art. no.: 6304282
This smoke detector is connected to the 230V mains. The built-in backup battery is maintained charged by the mains voltage, which ensures operation in the event of a power failure. Connection with cable as standard and connected with phase, neutral and signal conductors, max. 2.5mm2 and 250m. If you instead want a wireless connection, you can connect the E6304285 radio module as an accessory. You cannot mix wireless and wired connections. Easy to install over a draft, on a ceiling box or surface-mounted cabling. With the FastFix system, it is easily mounted on an installed base. As additional accessories, there is a relay base for controlling external equipment such as door closers and strobe lights and the E6303351 remote control makes testing at high ceilings easier. Approved according to EN14604:2005/AC:2008 with a sound pressure of 85dBm at 3 meters. Supplied with mounting base, screw and plug, built-in rechargeable battery and Swedish user manual.
Note! This smoke alarm is not backwards compatible with smoke alarms E6303345, E6303346 or E6303347 nor with relay base E6303348 or radio module E6303349. The old mounting base can however be used.
Access controller B27, Axema
Axema
Access controller B27, Axema
Art. no.: 5871091
VAKA B27 is a complete central unit for a door, with integrated software.B27 supports the new Power over Ethernet standard 802.3at (PoE+) which means that a single cable is sufficient for all functions of the door environment. Altogether, there are 7 relay outputs and 4 inputs for, for example, Day and Night locks, noise control, door controls etc. B27 manages the reader for passing in and out and is part of a VAKA system with one to ten door environments. Built-in calendar and registration of the 5,000 latest events.
Lockable Plastic enclosure with display
- Reader interface: 4-wire 150m
- Switch with 2 RJ45 ports
- Integrated Java software
- Power over Ethernet support 802.3 at.
- Lock control
- Door monitoring (closed / locked)
- Input for remote opening
Place for 2 modules for special functions
Support for Day&Night locks
Support for automatic door mechanism
ASF noise control with prior alert
Door/Lock warning jack
Door/lock/sab alarm jack
Aux jack (buzzer alarm,etc.)
- Temperature: 0° to + 55° C
- Voltage: PoE 802.3at / 10-30V DC
- Consumption: 65 mA (at rest) mA (max)
-Max load over relay contacts: 1 A 30V DC
- Dimensions: 180x280x60 (HxWxD)
Showing 52 of 1684