Order lines: 0

Ahlsell Products Electric Panels and fuses 20-24 23 Enclosed equipment

23 Enclosed equipment

Coupling inserts and clamps

Panel-sealed GPK

Light alloy-sealed

Fuse load switch

Distribution box

Ahlsell's wide range of electricity includes luminaires, LEDs, light sources, cables, electrical network equipment, installation equipment, switchboards, fuses, appliance cabinets, busbar distribution, automation, tools, measuring instruments, telecommunications, data, security, lighting, heating products, fans, and heated towel rails. We have everything within electricity for professionals working with electricity, including electricians, electrical installers, property managers, automation technicians, and many more. Explore our wide range of products here or visit your nearest Ahlsell store.

Bygg din elcentral och strömställare med drag and drop-funktion med Schneider Electric eDesign

Products (30)

Thread locks - 3 pole HPK

Eldon Installation

Thread locks - 3 pole HPK

Art. no.: 2353636

3 pole fuses, rated voltage 500 V. Screw in fuse boxes are supplied with fixed 4/5 line neutral terminal block and used as a fuse for the main line, the main distribution box or fuse for group line.
*Can replace enclosures like HGB 12VM, HGB 13 and HS 25

Thread locks - 3 pole HPK

Terminal expansion module EKS

Eldon Installation

Terminal expansion module EKS

Art. no.: 2251126

Designed for mounting on a standard rail. Contact protection.

Terminal expansion module EKS

Terminal expansion module EKS

Terminal expansion module EKS

Terminal expansion module EKS

Distribution panel GIII GPK

Distribution panel GIII GPK

Art. no.: 2383152

3 pole fused groups. Executed with disconnectable zero bars and fixed zero bars.

Knife-blade fuse boxes GPK

Knife-blade fuse boxes GPK

Art. no.: 2383917

GBSP type, IP43 is equipped with 3-pin blade fuses. Service cover with sealable screw lock. Comes as standard with insulated and non-detachable zero plinth. Knife fuse boxes are provided with face shields and a guard. Rated current 160 250, 400 and 630 A.
GBSP 3160 3116 I/I and II/II are equipped with connection clamps for both copper and aluminium cables, the others have them only for copper cable.

Service distribution centres CDCS 6320/2520

Service distribution centres CDCS 6320/2520

Art. no.: 2396308

Pre-assembled junction boxes for direct metering. All components for connecting service cables and one outbound cable are in place. The junction boxes have space for max. 6 output groups of type SLD 000.
The enclosures, CDC420, are tested in accordance with SS-EN 60439-5 and meet the requirements for Arctic climates. Enclosure class, IP34D. The base is integrated in the enclosure for positioning indoors on a floor or outdoors in the ground. Subscriber lock (triangular) for top part, DIN 3- for bottom part, and key for each lock included. Protection form, electric switch and breaker, IP2X in accordance with IEC 60529.

Coupling terminal KKP 4-pole

Coupling terminal KKP 4-pole

Art. no.: 2394701

Coupling terminal KKP 4-pole

Coupling terminal KKP 4-pole

Connection boxes HPK

Eldon Installation

Connection boxes HPK

Art. no.: 2355126

Connection boxes HAL is used in combination with coupling insert for splicing of thicker cables that shall be connected to the power supply unit. The lower end is divisible which enables attachment of cable with attached earth cable flange.

Connection boxes HPK

Connection boxes GPK

Connection boxes GPK

Art. no.: 2385121

Intended for connection of incoming cables to encapsulated centres. The terminal box is designed with one flange opening open when the cover is taken off. This allows for a simplified connection of cables, which can be entered from the front of the box with fitted cable flange, without being threaded through the flange opening. Can be supplied with connection part.

Service distribution centre CDC

Service distribution centre CDC

Art. no.: 2396300

Pre-assembled junction box in 4 different models with components in place for connecting service cables, and mounting current transformers, short-circuit terminal and meter. Supplemented with output groups and base. For mounting indoors or outdoors on a wall or the floor. The enclosures are tested in accordance with SS-EN 61439-5 and meet the requirements for Arctic climates. Enclosure class IP34D. Electric switch and breaker satisfies enclosure class IP2X in accordance with SS-EN 60529. Subscriber lock for top part and DIN lock for bottom lock included. Adapted for TN-C-S.

Fuse box HPK

Eldon Installation

Art. no.: 2353163

The distribution boxes are equipped with complete PEN equipment for max outbound groups, where neutral and protective conductor rails are fitted with yoke clamps corresponding to the number of 1 pole groups (25A) and 3 pole groups + 1 (63A) in the distribution box. Switchable for 4-and 5-conductor system in main conductor. As control fuses for district heating metering and similar HSU is used together with sealing details, HLD 1. Contact-protected by insulation material. The distribution boxes are supplied with self-adhesive fuse schedule.

Knife-blade fuses - 3-pole HPK

Eldon Installation

Knife-blade fuses - 3-pole HPK

Art. no.: 2353962

Knife fuses HKSB are equipped with frame clamps. The Al conductor can be connected by changing the connection clamps. Dividable gables in the upper and lower side of sizes from 160A.

Knife-blade fuses - 3-pole HPK

Load-break switch HPK

Eldon Installation

Load-break switch HPK

Art. no.: 2354074

Load-break switches 200-800A are equipped with frame clamps. The Al conductor can be connected by changing the connection clamps. The switches can be locked. They are supplied with fixed 4/5-conductor neutral terminal block. Divisible gables at top and bottom 160A. Auxiliary contact and interlocking as accessories.
Technical data:
Max line area:
Projection dimensions for turning: 1) 20mm 2) 65mm 3) 88mm

Load-break switch with fuses HPK

Eldon Installation

Load-break switch with fuses HPK

Art. no.: 2354230

Circuit breaker with fuse equipped with clamps for Al / Cu conductors on the incoming side. Outgoing connection normally for Cu but can be connected with Al conductor using KKL1X120T2 (accessory). The switches are lockable. They are delivered with PE-N terminal for 4/5 conductor systems. Zero terminal for Al / Cu. Divisible flange opening at the bottom. Auxiliary contact is available as an accessory. Developed in Eldon Installation's central system HPK.

Load-break switch with fuses HPK

Connection terminals for Al/Cu-lead

Eldon Installation

Connection terminals for Al/Cu-lead

Art. no.: 2368839

Coupling clamps/connecting terminals for direct mounting on e.g. switches with connecting rails (banners). Clamps, type GR can be supplemented with plate, of ALD type when connecting AI conductor.

Connection terminals for Al/Cu-lead

Bracing mid flanges, Eldon

Eldon Installation

Bracing mid flanges, Eldon

Art. no.: 2368356

With gasket for protection form IP 65.

Bracing mid flanges, Eldon

Thread-locking box Light alloy

Thread-locking box Light alloy

Art. no.: 2392606

Fuse boxes are available with or without side flanges. Fuse elements and zero plinth are mounted on an input plate. The plate is provided with slits or keyholes and is removable, to facilitate mounting.

Fuse switches Light alloy

Fuse switches Light alloy

Art. no.: 2393102

The fuse load switches constitute a combination of switches with knife fuse lower parts in a three-pole design, mounted to a device in a common enclosure. Delivered as standard with non-detachable zero plinth. Lockable with padlock in off mode. Fitted with connection clamps for copper or aluminium. The service cover is force-controlled and cannot be opened when the fuse switch is switched on.

Enclosures for DIN devices Light alloy

Enclosures for DIN devices Light alloy

Art. no.: 2393510

Enclosures in impact-resistant and non-corrosive, cast in light alloy.
Comes complete with DIN rail, a guard, and zero-and ground connection.
The flange opening is FL13.
Enclosure class IP65

Enclosures for DIN devices Light alloy

Neutral bar not separable (with full midrail)

Neutral bar not separable (with full midrail)

Art. no.: 2394602

Made with plinth of steatite and metal parts of nickel-plated brass with connectors for input and output wiring.

Switch fuse XLP

Switch fuse XLP

Art. no.: 2307311

With hand control.

Switch fuse XLP

Quick-connection block ECT

Eldon Installation

Quick-connection block ECT

Art. no.: 2251062

The compact ECT terminals can in many cases replace traditional screw terminals in distribution boards, saving time and costs when installing and connecting the outgoing neutral and ground conductors. ECT can be mounted on a DIN rail both vertically or horizontally and screwed onto a mounting plate. The cable must be stripped at least 12 mm. When using a sleeve, the sleeve must also be 12 mm.

Quick-connection block ECT

Connection insert KACL 470

Connection insert KACL 470

Art. no.: 2270628

Connection clamps for connecting AL-leads to the connection block KKP416 and KKP435L.

Service distribution centres SDCS

Service distribution centres SDCS

Art. no.: 2396302

Pre-assembled service center for transformer measurement, including components required for connection of service cable and fitting current transformers, short-circuit terminals and meters. Foundations are made as an option based on where installation is to take place. Suitable foundations type MARK-S 48, BPF-S 48 or GOLV-S 48. Main switch rated current 125 A. Tested according to SS-EN 61439-5 and meets the requirements for Arctic climate. Electrical switches and switches comply with enclosure class IP2X according to SS-EN 60529. Adapted for TN-C-S. Suitable fuse NH 00. Rail size on transformer set 30x10mm. Protection level cabinet IP34D ..

Service board SDCS

Service board SDCS

Art. no.: 2396317

Pre-assembled service center for transformer measurement. Including all components required to be able to connect service cables and mount current transformers, short-circuit terminals and meters. Foundations are made as an option based on where the layout is to take place. Adapted for TN-C-S. Suitable fuse NH1, NH2. Rail size of traffic kit 30x10mm.

Service board SDCS

Service Center CDCS 25 M

Service Center CDCS 25 M

Art. no.: 2396301

The enclosure has an integrated foundation for installation on floors indoors or in ground outdoors. Incoming components: 25 A meter board, connection terminals for connection of service cable and output cable, subscriber lock and key. Main circuit breaker rated current 25 A. The enclosures are tested in accordance with SS-EN 60439-5 and meet the requirements for Arctic climate. Belongs to protection class IP34D.

Service Center CDCS 25 M

Service center CDCS 63 M

Service center CDCS 63 M

Art. no.: 2396303

The enclosure has an integrated foundation for installation on floors indoors or in ground outdoors. Incoming components: 63 A meter board, connection terminals for connection of service cable and output cable as well as subscriber lock and key. Main circuit breaker rated current 63 A. The enclosures are tested in accordance with SS-EN 60439-5 and meet the requirements for Arctic climate. Belongs to protection class IP34D.

Service center CDCS 63 M

SDCS 35518 Service Center

SDCS 35518 Service Center

Art. no.: 2396307

Pre-assembled service center for transformer measurement. Including all components required for connecting a service cable and installing current transformers, short-circuit terminals and meters. Foundations are made as an option based on where erection is to take place. Suitable foundation type MARK-S 48, BPF-S 48 or GOLV-S 48. Main switch rated current 355 A. The enclosures are tested according to SS-EN 61439-5 and meet the requirements for Arctic climate. Electrical couplers and switches meet enclosure class IP2X according to SS-EN 60529. Adapted for TN-C-S. Rail size on transformer set 30x10mm

Distribution block / Socket distributors EKB

Eldon Installation

Distribution block / Socket distributors EKB

Art. no.: 2251140

For copper and aluminium cable. Compact distribution block for spreading and distributing of both incoming and outgoing wires in distribution boxes, connection equipment, switchgear, etc. Each type of block can be connected to a larger incoming wire and can then be split to several outgoing wires with lower area. Both incoming and outgoing wires can be of Cu or Al. The distribution block saves installation time and material when building distributions and can, in many cases, replace a normal track system. The distribution block is intended for installation on a DIN rail and for screwing onto a mounting plate. 3-and 4-pole distributors can be made simply using several blocks of the same or different models.

Distribution block / Socket distributors EKB

Distribution block / Socket distributors EKB

Distribution block / Socket distributors EKB

Distribution block / Socket distributors EKB

Clamb kit OCC

Eldon Installation

Art. no.: 2368846

Clamb plate for connecting earth conductors in enclosures, power stations and other switching equipment.

Distribution block EKB

Eldon Installation

Distribution block EKB

Art. no.: 2238895

Distribution block-Distribution terminal block, 1P, Cu 250A/Al 200A, In.1x120mm²; Out.6x35mm², IP20, for DIN rail, incl. marking.

Distribution block EKB

Showing 30 of 30