Order lines: 0

Ahlsell Products ElectricPanels and fuses 20-24

Panels and fuses 20-24

20 Fuse material

21 Standard components

22 Gauge displays, fuse boards

23 Enclosed equipment

24 Temporary power, output posts, construction panels

Do you need fuses? Ahlsell helps you find installation material for all your electrical jobs. Whether you work with commercial properties or private residences, we have the range for your next project. We offer products from several well-known suppliers. Here you will find wall sockets, cable ladders, and accessories for easy installations. We also offer smart wall sockets, switches, and dimmers from several major suppliers. Modern products for modern solutions. All the installation material you need under one roof. A job well done begins with good materials. Explore our wide range of fuses, installation materials, and accessories here in the online store or visit your nearest Ahlsell shop.

Bygg din elcentral och strömställare med drag and drop-funktion med Schneider Electric eDesign

Products (828)

Socket distributor 16/32 A

Socket distributor 16/32 A

Art. no.: 2466232

Construction panel, bag model, with impact-resistant plastic housing. Can also be placed on the wall. Equipped with 1 416-6 intake, 4 Schuko outlets with 13A fusing, and 2 416-6 outlets.

Socket distributor 16/32 A

Socket outlet 63A with 5 Schuko sockets

Socket outlet 63A with 5 Schuko sockets

Art. no.: 2469008

Portable electric cases/sub-connection panels 63A with the following socket types:
IEC-Output: 1 x 16A 3P+N+E 230/400V and 1 x 32A 3P+N+E 230/400V
IEC-Intake: 1 x 63A 3P+N+E 230/400V

High-power fuse “Swedish design" 24kV

High-power fuse “Swedish design" 24kV

Art. no.: 2059172

Sub-field fuses - Back-up fuses are designed for short disconnection times in the event of arc failure on the low voltage side of the distribution transformers.
The fuses are intended as current limiting / short-circuit protection, which will trigger all currents between its maximum breaking current Imax (I1) down to the Imin (I3) value.
The fuses correspond to the requirements of the older Swedish test standard 17A- "Swedish fusing" through:

• The switch-off time is adapted to the rated current of the fuse (safe disconnection at 0.1s)
• The rated current of the fuse corresponds to the requirements of being greater than 1.1 times the rated current of the transformer.
• The fuses meet the requirements for the connection currents according to 17A.

The fuses are also dimensioned to allow the transformers to run with 40% overload for 2 hours. The fuses are tested and approved in accordance with current test standard IEC 60282-1 and VDE 0670 T4.
Dimensionally, the fuses meet DIN 43625 and are designed for use both indoors and outdoors. The low effect losses in the fuses make them suitable for use in encased switchgear. In these applications where cooling is reduced, the effect loss of the fuse should be considered when selecting rated current of the fuse. The fuses are lead- and cadmium free and equipped with striking pin, type medium 80 N (Newton). The entire range extends to 12 kV from 6A-160A and for 24 kV from 4A-125A. the fuses have clear marking with technical data and E-number to avoid mistakes as well as reinforced marking around the entire fuse body of the striking pin position. This marking simplifies post-checking of the mounting direction to ensure the function of the striking pin. The striking pin is activated either by melted melting conductors or via built-in temperature sensors.

High-power fuse “Swedish design" 24kV

High-power fuse “Swedish design" 24kV

High-power fuse “Swedish design" 24kV

High-power fuse “Swedish design" 24kV

High-power fuse “Swedish design" 24kV

Ifö Hicap ECO aM, size 00, 500/690 V

Ifö Hicap ECO aM, size 00, 500/690 V

Art. no.: 2045221

Hicap Eco aM 690 V is an environmentally-friendly, lead and cadmium-free blade fuse for protecting cables.
The fuse meets IEC 60269 and has high breaking ability, excellent selectivity, an optimized melting characteristics. The combination indication provides
100% indication in all types of installations.

Ifö Hicap ECO aM, size 00, 500/690 V

Ifö Hicap ECO aM, size 00, 500/690 V

Cable reel 25m, IP44, 3G x 2.5

Cable reel 25m, IP44, 3G x 2.5

Art. no.: 2405508

Cable reel 25m, IP44, 3G x 2.5

Motor cable with CEE device and rubber cable H07RN-F, a-collection

Motor cable with CEE device and rubber cable H07RN-F, a-collection

Art. no.: 2404618

Motor cable completely mounted with CEE ballast of the highest quality. Approved for outdoor use.

Inserts time & temp. controlled without gauge

Inserts time & temp. controlled without gauge

Art. no.: 2449214

Insert AELN with repetitive time and temperature controlled outlets without measurement. The inserts are equipped with 2 shock outlets with separate personal protection switches and with illuminated overlay, sockets and setting buttons. The time and temperature controlled socket is controlled by the set departure time and by the current outdoor temperature, has a maintenance-free capacitor backup which means that they can handle a power failure of up to 48 hours without losing their settings. The components are mounted on a DIN rail, which makes any replacements very easy. All AELN inserts have a maximum switch-on time of 3 hours for the time- & temp-controlled outlets and automatic summer / winter time. The insert is compatible and can also be used in previous P100 enclosures.

Inserts time & temp. controlled without gauge

Inserts time & temp. controlled without gauge

Inserts time & temp. controlled without gauge

Cartridge fuse 5x20 slow

Cartridge fuse 5x20 slow

Art. no.: 2029925

Slow
Available in complete packages.

Diazed fuses DLS

Diazed fuses DLS

Art. no.: 2010020

Fuses av typen DLS.

Diazed fuses DLS

Diazed fuses DLS

Diazed fuses DLS

Diazed fuses DLS

Miniature circuit breaker iC60H 1-pole 10kA C

Schneider Electric

Miniature circuit breaker iC60H 1-pole 10kA C

Art. no.: 2112130

Areas of application: for offices, commercial and industrial installations. C-curve: for protection of lighting and heating circuits, as well as motors and larger groups of bulbs or fluorescent tubes. Rated voltage: 230/400 V AC Circuit-breaking capacity: according toEN 60898: 10 kA

Miniature circuit breaker iC60H 1-pole 10kA C

Miniature circuit breaker iC60H 1-pole 10kA C

Miniature circuit breaker iC60H 1-pole 10kA C

Miniature circuit breaker iC60H 1-pole 10kA C

Miniature circuit breaker iC60H 1-pole 10kA C

Fuse DIAZED GL/GG, 500V

Fuse DIAZED GL/GG, 500V

Art. no.: 2009019

DIAZED fuse, 500V AC / DC, for cable and construction protection.

Fuse 11A

Art. no.: 2030168

Fuse 11A / 1000V.

Coupler socket Basic 16A

Coupler socket Basic 16A

Art. no.: 2424636

Connectable wire area 1-2.5 mm².

Coupler socket Basic 16A

Coupler socket Basic 16A

Outlet center 32A Rcd, Mcb

Outlet center 32A Rcd, Mcb

Art. no.: 2466612

Outlet center 32A Jfb, MCB. Outlet center for fixed installation 32A. Terminal connection from below or from above. Protection class IP54.

Earth fault breaker REDtest

Schneider Electric

Earth fault breaker REDtest

Art. no.: 2165160

With automatic test function

Earth fault breaker REDtest

Enclosures in plate metal 13 module’s width, Hager

Enclosures in plate metal 13 module’s width, Hager

Art. no.: 2290939

Surface mounted made of sheet metal with door, IP30, type Gamma
Space of up to 72 modules for automatic or safety products. White RAL 9010 sheet metal. The enclosures are supplied with door and is equipped with neutral and earthing equipment with quick connection technology. Simplified line laying with DIN rails with snap technology. Gamma casing is available in 2 widths, 13 or 18 modules, 1-4 rows.

Enclosures in plate metal 13 module’s width, Hager

Enclosures in plate metal 13 module’s width, Hager

Enclosures in plate metal 13 module’s width, Hager

Terminal block Quick

Terminal block Quick

Art. no.: 2201277

ABB's N / PE Quick terminals are designed to be flexible in terms of expandability. Terminals fit holders for the UK600 and Mistral series and all other ABB enclosures.

Terminal block Quick

Splice cord H05RR-F, with earth connector

Splice cord H05RR-F, with earth connector

Art. no.: 70414553

Rubber cable, equipped with easy-grip plug and splice socket with blue self-closing cap. Approved for outdoor use. Cable H05RR-F.

Fitting sections PK

Fitting sections PK

Art. no.: 2000230E

Diazed fittings.

Fitting sections PK

Fitting sections PK

Fitting sections PK

Fitting sections PK

Fitting sections PK

Attachment plug Quick type P 32A, without screw

Attachment plug Quick type P 32A, without screw

Art. no.: 2425428E

Screwless plug for 32 A with quick-release connection. Connectable wire area 2.5-6 mm².

Phase rail Type PS

Phase rail Type PS

Art. no.: 2101686

ABB's busbar system enables safe and fast connection of miniature circuit breakers, earth leakage circuit breakers and personal protection switches. Available in fixed as well as cuttable lengths with many accessories such as touch guards, end guards and feeding terminals.* =Busbar adapted for auxiliary / signal contact

Phase rail Type PS

Phase rail Type PS

Phase rail Type PS

Phase rail Type PS

Phase rail Type PS

Miniature circuit breaker iC60H 3-pole 10kA B

Schneider Electric

Miniature circuit breaker iC60H 3-pole 10kA B

Art. no.: 2112105

Areas of application: for offices, schools, commercial and industrial installations. B-curve: for protection of cables and loads with low connection current. Rated voltage: 230/400 V AC Circuit-breaking capacity: according toEN 60898: 10 kA

Miniature circuit breaker iC60H 3-pole 10kA B

Cord rack without ground, white, 2EUR

Cord rack without ground, white, 2EUR

Art. no.: 2404576

Cord rack without ground, white, 2EUR.

Multiple socket PUR, 25 m

Multiple socket PUR, 25 m

Art. no.: 2404267

Halogen-free, highly flexible, UV-, ozone-, oil- and chemical-resistant PUR cable (H07BQ-F) with 2 or 3-way sockets. Especially suitable in environments where the cable is subjected to great stress. Transmissible and resistant to impact. For use in dry, humid or wet environments, such as industry and agriculture. Suitable for connection of power tools such as drills and circular saws, also for movable motors or machines at construction sites, agriculture and shipyards. For indoor and outdoor use. The cable is flexible down to -40 ° C.

Multiple socket PUR, 25 m

Wall inlet, IP44, 16A, ABB

Wall inlet, IP44, 16A, ABB

Art. no.: 2417192

Surface mounting. Housing of robust thermoplastic with cable seals consisting of restriction nipples and thread inserts Pr 22,5 för 16 A, Pr 28,3 för 32 A. M20 för 16 A, m"5 för 32 A on demand. Extra installation-friendly and user-friendly design.

Wall inlet, IP44, 16A, ABB

Wall inlet, IP44, 16A, ABB

High-power fuse “Swedish design" 12kV

High-power fuse “Swedish design" 12kV

Art. no.: 2059154

Sub-field fuses - Back-up fuses are designed for short disconnection times in the event of arc failure on the low voltage side of the distribution transformers.
The fuses are intended as current limiting / short-circuit protection, which will trigger all currents between its maximum breaking current Imax (I1) down to the Imin (I3) value.
The fuses correspond to the requirements of the older Swedish test standard 17A- "Swedish fusing" through:

• The switch-off time is adapted to the rated current of the fuse (safe disconnection at 0.1s)
• The rated current of the fuse corresponds to the requirements of being greater than 1.1 times the rated current of the transformer.
• The fuses meet the requirements for the connection currents according to 17A.

The fuses are also dimensioned to allow the transformers to run with 40% overload for 2 hours. The fuses are tested and approved in accordance with current test standard IEC 60282-1 and VDE 0670 T4.
Dimensionally, the fuses meet DIN 43625 and are designed for use both indoors and outdoors. The low effect losses in the fuses make them suitable for use in encased switchgear. In these applications where cooling is reduced, the effect loss of the fuse should be considered when selecting rated current of the fuse. The fuses are lead- and cadmium free and equipped with striking pin, type medium 80 N (Newton). The entire range extends to 12 kV from 6A-160A and for 24 kV from 4A-125A. the fuses have clear marking with technical data and E-number to avoid mistakes as well as reinforced marking around the entire fuse body of the striking pin position. This marking simplifies post-checking of the mounting direction to ensure the function of the striking pin. The striking pin is activated either by melted melting conductors or via built-in temperature sensors.

High-power fuse “Swedish design" 12kV

High-power fuse “Swedish design" 12kV

High-power fuse “Swedish design" 12kV

High-power fuse “Swedish design" 12kV

High-power fuse “Swedish design" 12kV

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Art. no.: 2290830

Pre-installed distribution board available in widths of 13 and 18 modules.The following are included: 1 main breaker 40A, 1 RCD 25A, 3 MCBs, 10A C-type, 6 kA / row.The board can be supplemented with a door and rear piece (see Gamma accessories).
The units are supplied with all internal conductors between the main circuit breaker and earth fault circuit breaker connected and with a phase rail for the whole row. It is now easy to snap the miniature switch closed and connect to the phase rail. The main box is equipped with contact protection on the phase rail and protective cover for standard slots in reserve.

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Standard distribution box surface-mounted, type Gamma IP 30. Pre-installed.

Post for GARO foot

Post for GARO foot

Art. no.: 2449517

Post pipe Ø60mm.

Standard contactors ESB

Standard contactors ESB

Art. no.: 3210555

ABB's hum-free standard contactors are available from 16 A up to 100 A. They are often used for controlling lighting, heating and ventilation, as well as small motors and pumps. The auxiliary contact blocks fit the entire series. There is a wide range of coil sizes and different main contact combinations. With an innovative combined AC / DC design on the coil, with both automatic and manual models, as well as tool-free accessories, ABB's standard contactors are a perfect choice - not least in sound-sensitive environments.

Standard contactors ESB

Standard contactors ESB

Standard contactors ESB

Standard contactors ESB

Standard contactors ESB

Blocking device with sign

Hammarprodukter

Blocking device with sign

Art. no.: 2001006

Blocking device with sign for control panels with thread fuse II and III (E27-E33). Made of non-conductive material (plastic.) Work in progress. Fuse may not be attached. Space for Name and Telephone Number. 40x105mm (sign dimensions).

Blocking device with sign

Diazed fuses ECO, gG

Diazed fuses ECO, gG

Art. no.: 2011032

D-fuses type gG meet the requirements according to IEC standard 60269-3-1, and replace the previous both slow and fast fuses. The characteristics of the gG fuse are sluggish in the overcurrent area and fast in the short-circuit area. The fuses have high breaking capacity, good selectivity, efficient current limitation and low power losses.

Diazed fuses ECO, gG

Diazed fuses ECO, gG

Diazed fuses ECO, gG

Diazed fuses ECO, gG

Diazed fuses ECO, gG

Door lock LUMS92-06D for meter cabinet

Door lock LUMS92-06D for meter cabinet

Art. no.: 2240637

LUMS92-06D is a lock for surface-mounted meter cabinets manufactured between 1992-2006 plus today's cabinets. For the following meter cabinets: MU125A, MU125 B/E, MU163 B/E, MU225 B, MU125, MU163, MU225, MSU125A, MIM125, MIM163, MIM225, MUM125, MUM163, MU225, MUK125. Contains 2 locks.

Attachment plug Basic 16A CEE

Attachment plug Basic 16A CEE

Art. no.: 2424504

Connectable wire area 1-2.5 mm.

Attachment plug Basic 16A CEE

Attachment plug Basic 16A CEE

Attachment plug Basic 16A CEE

Impulse relays iTL/ iETL

Schneider Electric

Impulse relays iTL/ iETL

Art. no.: 4001044

The iTL impulse relays are available in version 16A with switching or closing contacts and can be expanded to both 3P and 4P versions with additional extensions. They are mainly used for control of lighting groups consisting of incandescent bulbs or fluorescent tubes. Remote control is obtained by means of a pulse of duration 50mS, maximum number of changes/minute is 5.
Technical data for control circuit:
Control voltage: 12 to 240V AC, 6 to 110V DC
Hall effect: 1P, 2P, 3P 19VA, 4P 38VA
Connectable area: power circuit 1.5-4 mm², operating circuit 1-4 mm²

Impulse relays iTL/ iETL

Impulse relays iTL/ iETL

Extension cable with grounding device and rubber cable H07RN-F

Extension cable with grounding device and rubber cable H07RN-F

Art. no.: 2404517

With oil-resistant rubber cable H07RN-F 3G1,5 (RDOE 3G1,5). Easy-grip earthed plug and splice socket with cover in an extra strong design. Approved for outdoor use.

Enclosure Vector outdoors, Hager

Enclosure Vector outdoors, Hager

Art. no.: 2281696

Made of white polycarbonate for outdoor installation.
Transparent, reversible door.
The Enclosure is equipped with knockout flanges.
Enclosures are made of insulating material, self-extinguishing, class II. IP65
Material: Polycarbonate has excellent properties against chemical attack
(salt solutions, acids, hydrocarbons, alcohol) and against UV radiation
Supplied without neutral and earthing equipment. Holder for an N and PE rail is included in enclosure.
White extra N/PE rail can be ordered öev holder
Neutral and earth rail can be ordered separately.

Enclosure Vector outdoors, Hager

Enclosure Vector outdoors, Hager

Enclosure Vector outdoors, Hager

Enclosure Vector outdoors, Hager

Enclosure Vector outdoors, Hager

Standard cabinet series FW surface-mounted IP44

Standard cabinet series FW surface-mounted IP44

Art. no.: 2396500

Made of grey painted sheet metal, RAL 9002 with reversible door. Supplied with support rails, door, PE/N- clamps and front piece

Standard cabinet series FW surface-mounted IP44

Standard cabinet series FW surface-mounted IP44

Standard cabinet series FW surface-mounted IP44

Standard cabinet series FW surface-mounted IP44

Standard cabinet series FW surface-mounted IP44

Standard enclosure Stainless IP55

Eldon Installation

Standard enclosure Stainless IP55

Art. no.: 2248081

Stainless enclosures, IP55, for use in agriculture,laundry rooms, outdoors and in other demanding installations. The enclosures are available in standard distribution box version and as combination of thread locking and standard distribution box. The enclosures have complete earth and neutral rails as well as flange openings of size FL21, at bottom and top respectively. To simplify installation the enclosures are also equipped with a number of membrane bushings of size M20, M32 and M40 at bottom beside flange opening. On the side there are prepared piercings of size M12, for mounting of pressure equalising valves that hinder condensation formation.
The distribution boxes are designed for use in accordance with “Handbok för Elinstallationer i Lantbruk" (Handbook for Electrical Installations in Agriculture), edition 2005:1, produced by among others Lantbruket’s Fire Safety Committee, EIO, Elektriska Nämnden and Länsförsäkringar where it is stated that metal encased electric distribution boxes made of stainless steel should be selected first.
Features
• Meet the insurance company’s fire requirements• Enclosure class: IP55• 150mm c/c between device rows• Can be equipped with key lock• Flange openings: 2 x FL21• Membrane bushings 20, 32 & 40 for inbound/outbound cable
NRGA236 and NRGA354 are designed for standard devices on DIN rail. NRGB30718 and NRGC30518 is designed as threadlocking exchanges, GII and GIII, as well as with a free standard row of 18 modules. Designed for mounting of main circuit breaker, earth fault breaker, surge protector, timer switch or other standard devices. If division of inbound neutral rail is desired when installing more than one earth fault breaker, accessory GSKARV is used, E-no.: 22 510 48.

Standard enclosure Stainless IP55

Standard enclosure Stainless IP55

Neutral terminal

Neutral terminal

Art. no.: 2202541

Neutral terminal block with 7 screw connections 1.5-16 mm², blue. For snap fastening on DIN rail. Not contact protected, Uninsulated.

Phase rail Resi9

Schneider Electric

Phase rail Resi9

Art. no.: 2112670

Used to facilitate the connection of miniature switches on the input side. The phase rails for miniature circuit breakers are of the fork type and are available in 3-pole design, different lengths, Rated current 63A

Phase rail Resi9

Phase rail Resi9

Phase rail Resi9

Phase rail Resi9

Phase rail Resi9

Standard distribution boxes pre-connected for surface mounting, G-pack

Standard distribution boxes pre-connected for surface mounting, G-pack

Art. no.: 2178978

Plastic distribution boxes for surface mounting in wall, ready fitted. The distribution boxes are entirely made of halogen free plastic material and equipped with quick connection blocks. With simple attachment the entire internal structure is held in place and when installed or adjusted, everything can be folded out, providing a comfortable workspace that helps simplify the final assembly of the outbound cables. This contributes to ensuring the complete distribution box regarding the risk of overflow and the emergence of arcs between incompletely connected conductors. The depth behind the DIN rails is 23 mm in the plastic enclosure. The cabinet is always supplied with a door that can be reversed if necessary.
The 1-row distribution box is pre- equipped with 1 HB 40A, 1 JFB 4-pole/40A, 2 C110 and 3 C116
The 2-row distribution box is pre- equipped with 1 HB40A, 1 JFB 4-pole/40A, 7 C110 and 3 C116
The 3-row distribution box is pre- equipped with 1 HB 40A, 1 JFB 4-pole/40A, 10 C110 and 3 C116
Distribution boxes with figure -6 after the type number are equipped with 6kA automation

Standard distribution boxes pre-connected for surface mounting, G-pack

Standard distribution boxes pre-connected for surface mounting, G-pack

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

Schneider Electric

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

Art. no.: 2165085

fault current 30mA, breaking capacity 6 kA, design A-class

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

Residual current circuit breaker with overcurrent protection iC60 RCBO 4 pole

High-voltage fuses 12kV, sub-range fuses

High-voltage fuses 12kV, sub-range fuses

Art. no.: 2059206

High-voltage fuses that can manage 12 kV currents.

Cartridge fuse 5x20 quick

Cartridge fuse 5x20 quick

Art. no.: 2029816

Quick. Sold only in unbroken package.

Main switch 80A HA

Main switch 80A HA

Art. no.: 2108673

Main circuit breaker in module version can be mounted in all standard casings and cabinets. Load-break switch with independent hand operation and visible switch point. The switches are mounted on DIN rail.

Main switch 80A HA

Miniature circuit breaker 3-pole type D 10kA

Miniature circuit breaker 3-pole type D 10kA

Art. no.: 2107301

Miniature circuit breaker 3 pole type D 10kA for industry, offices or where high short-circuit currents exist. For reliable protection of cables and conductors against overload and short circuit.
For devices with very high starting currents e.g. motors and transformers. Accessories like auxiliary contacts, signal contacts, shunt release and under-voltage trigger are mounted without tools on the miniature circuit breaker. DIN rail bracket’s advanced attachment mechanism means you can easily disconnect products from the DIN rail. All miniature circuit breakers meet the requirements of IEC/EN 60898 and IEC/EN 60947-2 standards. All conductive parts are tamper-proof, easy removal from the phase rail - with new DIN rail clips, one on top and on at bottom. Pure and simple labelling – a transparent protective for labelling area

Miniature circuit breaker 3-pole type D 10kA

Miniature circuit breaker 3-pole type D 10kA

Miniature circuit breaker 3-pole type D 10kA

Miniature circuit breaker 3-pole type D 10kA

Miniature circuit breaker 3-pole type D 10kA

Outlet combination Perilex and wall socket

Outlet combination Perilex and wall socket

Art. no.: 2408081

A handy socket combination for hob and oven. The base box has a Perilex socket and a 1-phase touch-protected earthed socket in combination. The unit has ready-made internal (2.5mm² RQ) connections to the respective socket base. The lid has instructions for cable/pipe entries centered on the long and short sides and in the corners. The bottom plate has a 24mm hole for cable/pipe entry and a crescent-shaped opening that fits over a recessed hob box and also "keyholes" for fastening with box screws, otherwise there are 6 mounting holes, one in each corner and 2 in the middle.

Bottom box in sheet metal for mounting combi

Bottom box in sheet metal for mounting combi

Art. no.: 2290049

GARO's bottom drawers for recessed wall mounting fit steel metal control panels. If the bottom box is to be moulded into the wall, a wooden frame must be used internally so that the bottom box cannot cave in due to the pressure of the cement. When two bottom boxes are to be mounted above each other, the optional "input box" IGB accessory can be used to facilitate piping.

Bottom box in sheet metal for mounting combi

Bottom box in sheet metal for mounting combi

Bottom box in sheet metal for mounting combi

Contactor iCT

Schneider Electric

Art. no.: 3290400

Available for 1-4 pole up to 100A
Flush voltage: 24 or 230/240V AC
Power circuit: Multi-wire cable, 2x2.5 mm² for 16 and 25A, 2x10 mm²

Extension cable with grounding device & halogen-free rubber cable H07BQ-F

Extension cable with grounding device & halogen-free rubber cable H07BQ-F

Art. no.: 2405164

Halogen-free highly flexible, weather and oil resistant connecting cable especially suitable where the cable is exposed to abrasive loads. For use in dry, damp or wet environments, e.g. in industrial and agricultural technical applications, heating installations providing that there is no risk for contact with hot parts or radiation. Suitable for connection of power tools such as drills and circular saws, also for movable motors or machines at construction sites, agricultural settings, and shipyards. Also suitable for cold store installations.

Converter CEE 32A 16A 400V

Converter CEE 32A 16A 400V

Art. no.: 2466649

Adapter/transition 32A/400V to 16A/400V with fuse 3P 16A IP44

Electric cable 7-pole, 5 m

Electric cable 7-pole, 5 m

Art. no.: 9850539

12V cable with 7 PVC-coated copper conductors, for installation of trailer connectors and trailer lighting etc. Length: 5 meters.

Showing 52 of 828