Order lines: 0

Ahlsell Products Electric Mains power supply equipment 06-09 07 Wiring cabinets and accessories Cable splice 1 kV

1 kV

Ahlsell's wide range of electricity includes luminaires, LEDs, light sources, cables, electrical network equipment, installation equipment, switchboards, fuses, appliance cabinets, busbar distribution, automation, tools, measuring instruments, telecommunications, data, security, lighting, heating products, fans, and heated towel rails. We have everything within electricity for professionals working with electricity, including electricians, electrical installers, property managers, automation technicians, and many more. Explore our wide range of products here or visit your nearest Ahlsell store.

Products (29)

Cable joint 1kV, SJPK Papper-Plast

Cable joint 1kV, SJPK Papper-Plast

Art. no.: 0702126

Cable splice 1kV, 4-lead paper cable for 4-lead plastic cable.

Cable joint 1kV, SJPK Papper-Plast

Cable joint 1kV, SJPK Papper-Plast

Cable joint Gel EVO

Cable joint Gel EVO

Art. no.: 0703467

Gel-filled cable joints IP68 complete with terminal block, for permanent submersion in water (max. 10 m), burial or temporary installations. Enclosure with snap lock, openable. Made of halogen-free, self-extinguishing, impact-resistant UV-resistant polypropylene. Unlimited storage time and a service life of at least 30 years.

Non-toxic silicone gel that meets the requirements of CE 67/548/EEC and CE 1999/45/EC.

Cable joint Gel EVO

Cable joint Gel EVO

Cable joint Gel EVO

Cable joint 1kV SJK

Cable joint 1kV SJK

Art. no.: 0718322

Use: For 4-conductor cable to 4-conductor cable and 4-conductor cable to 3+1-conductor cable. Complete with screw sleeves (torque) 1 kV.
In case of splicing of 4-conductor cable to 3-conductor cable, the filling bit for splicing of 3+1-conductor cable’s concentric PEN conductor is sued.
Also for splicing of plastic and paper cables. For splicing of plastic and paper cables, separate transition kit SJP has to be ordered.

Cable splice 1 kV, ALUS

TE Connectivity/Raychem

Cable splice 1 kV, ALUS

Art. no.: 0716060

Use: For insulation and sealing of the press splice sleeve when splicing ALUS 1kV aerial bundled cable.
Standard: SS 424 14 44. Raychem PPS 3013.
Design: The inner sleeve is expanded to 25 mm internal diameter so that it can be applied and shrunk with heat. It is internally coated with adhesive that melts and seals during shrinking. The sleeve shrinks to 8 mm diameter; the length is 300 or 500 mm. The material’s mechanical and electrical durability enables splicing of wires to be carried out in situ without displacement.
Set contents: The sets include only 1 hose. A complete 4-lead splice requires 4 sets.

Cable joint EPKJ, 1kV for press sleeves

TE Connectivity/Raychem

Cable joint EPKJ, 1kV for press sleeves

Art. no.: 0716020

Use: For splicing of plastic-insulated earthed cable, 3-and 4-lead, 1 kV.
Features: Phase insulation and outer jacket are of thick- walled, glue-equipped heat-shrink tubing.

Cable joint EPKJ, 1kV pa-pl. For press sleeves

TE Connectivity/Raychem

Cable joint EPKJ, 1kV pa-pl. For press sleeves

Art. no.: 0716140

Cable joint EPKJ, 1kV pa-pl. With screw joint sleeves

TE Connectivity/Raychem

Cable joint EPKJ, 1kV pa-pl. With screw joint sleeves

Art. no.: 0716188

Use:For splicing of paper earth cable to plastic-insulated earth cable, 4-lead, 1kV.
Standard:SS 424 14 44, EBR KJ 25:99, Raychem PPS 3013.
Design:Inner and outer sleeves and sealing mouldings are expanded so that they can be applied and then heat-shrunk. The paper cable’s primary insulation is reinforced with insulating sleeves. Between these sleeves and the paper cable’s lead jacket, an adhesive-coated sealing moulding is installed so that the sleeves and the moulding together form a pressure-sealed termination on the paper side. Other sleeves are coated with adhesive that melts and seals during shrinking.
Sets with screw splice sleeves also include a folding sleeve.

Cable joint 1 kV, Gelbox

TE Connectivity/Raychem

Cable joint 1 kV, Gelbox

Art. no.: 0716088

Use: For splicing of plastic-insulated earthed cable, 4- and 5-lead, up to 1kV.
Standard: Cenelec HD 623, IEC 61238–1.
Design: The splices are contained in a UV-resistant polypropylene cover that is very tough. The cover is filled with the patented PowerGel®. After splicing a lead, the user snaps together the two halves around the cable, and the splice is ready for use. Installation requires no special tools. The splice has an unlimited storage time, and its service life is at least 30 years.
Set contents: GelBox sets come complete with screw splice sleeves.

Cable joint 1 kV, GUROFLEX

TE Connectivity/Raychem

Cable joint 1 kV, GUROFLEX

Art. no.: 0716110

Use: For splicing of plastic and paper-insulated earth cable, 4-lead, and transitions between them. Up to 1 kV.
Design: After cable splicing, it is placed in the included splice box that is then filled with a flexible two-component insulation putty. The putty is completely environmentally sound and free of toxins such as isocyanates. Any residue can therefore be thrown directly into the trash. The putty has been tested by Sveriges Provnings- and Forskningsinstitut [Sweden's Test and Research Institute] (SP), report no. F3 00660.
Set contents: The sets for paper-insulated cable or for transition between plastic- and paper insulated cable contain material for connecting a lead jacket.
Splice sleeves not included.

Cable joint 1kV

Cable joint 1kV

Art. no.: 0712210

Use: For splicing of 1kV plastic- and paper-insulated cable for 3-, 4-, and 5-lead and for transition between plastic- and paper-insulated cable as well as signal cable. Tolerates 10 m water depth.
Standard: SS 424 14 44, 1st edition, EBR KJ 24:89.
Design: The cable splice consists of an impact-resistant mould with flexible sealing rings between the mould and the cable. Casting resin and hardener are precisely measured in a two-chamber bag. SMARTA should not be installed at temperatures below –10°C.
When splicing paper-insulated cable, and at transitions between paper- and plastic-insulated cable, the PPC accessory set must be used.
When splicing plastic-insulated cable to paper-insulated cable, sleeves with intermediate walls must be used.

SJK - Shrink joint kit

SJK - Shrink joint kit

Art. no.: 0718379

For jointing 1 kV plastic-insulated (PEX, PE, PVC) cables, 3- and 4-wire, shielded or unshielded. Set includes: 4 shrink tubes for insulation over joint sleeves and
1 shrink tube for restoration of the outer sheath and assembly instructions. The shrink tubes are internally coated with adhesive. Splicing sleeves are not included and are ordered
separately.

SJKV - Shrink joint kit with screw joint sleeves, 4+1 to 4+1

SJKV - Shrink joint kit with screw joint sleeves, 4+1 to 4+1

Art. no.: 0718300

For jointing ground cables 4 + 1 and 5 conductors 1kV.

SJKV - Shrink joint kit with screw joint sleeves, 4+1 to 4+1

SJKV - Shrink joint kit with screw joint sleeves, 4+1 to 4+1

SJKV - Shrink joint kit with screw joint sleeves, 4+1 to 4+1

SJKV - Shrink joint kit with screw joint sleeves, 4+1 to 4+1

Shrink joint 1kV

Shrink joint 1kV

Art. no.: 0718210

Shrink-splice kit set for plastic insulated cables, 3-, 4- and 5-wire Al and Cu. Shrink splice consisting of 4 resp., 5 shrink tubes for insulation over splice sleeves, 1 shrink tube for restoration of the sheath. Shrink tubes are thick-walled and are made of modified polyolefin. The pipes are internally coated with polymeric adhesive. The adhesive melts when the pipe heats up and achieves a very good seal against the cable insulation and sheath.
Use: For splicing 1 kV plastic-insulated (PEX, PE, PVC) cables, 3- and 4-wire, with or without screen, and 5-wire. For press sleeve.

Cable joint LJSM/EPKJ, 1kV with screw splice sockets

TE Connectivity/Raychem

Cable joint LJSM/EPKJ, 1kV with screw splice sockets

Art. no.: 0716490

Use: For jointing of plastic-insulated earthed cable, 3-and 4-lead, 1 kV.
Features: Phase insulation and outer jacket are of thick- walled, glue-equipped heat-shrink tubing.
Contains screwdriver sleeve type BSLB.

Cable joint 1kV SJK1C-SE

Cable joint 1kV SJK1C-SE

Art. no.: 0702026

Cable joint for a plastic isolated 4-lead cable 1kV. The splicing set includes the required materials, including the screw splicing casings, which include an integrated element in the screws, and which detach when the required torque is achieved.

Cable joint 1kV, for plastic-isolated 4-wire al/cu

TE Connectivity/Raychem

Cable joint 1kV, for plastic-isolated 4-wire al/cu

Art. no.: 0716495

For splicing of plastic-insulated earthed cable, 3-and 4-lead, 1 kV.
Phase insulation and outer jacket are made of thick- walled, glue-equipped heat-shrink tubing.
The splice contains screw splice sockets type BSL, which cover a large area with few sises and do not require special tools.

Joint AKKJ, material kit

Joint AKKJ, material kit

Art. no.: 81011116

Material kit 1 kV.

Joint EKKJ, material kit

Joint EKKJ, material kit

Art. no.: 81001116

Material kit 1 kV.

Cable joint 1kV, LJSM

TE Connectivity/Raychem

Cable joint 1kV, LJSM

Art. no.: 0716200

For splicing of plastic-insulated earthed cable, 5-wire 1kV.
Phase insulation and outer jacket are made of thick- walled, glue-equipped heat-shrink tubing.
The splice contains screw splice sockets type BSL, which cover a large area with few sises and do not require special tools.

Cable joint 1kV, LJSU

TE Connectivity/Raychem

Cable joint 1kV, LJSU

Art. no.: 0716202

For splicing of plastic-insulated earthed cable. Phase insulation and outer jacket are made of thick- walled, glue-equipped heat-shrink tubing. LJSU is for press splice sockets (not included). Screw splice sleeves must not be used for this joint.

Cable joint 1kV, LJTM

TE Connectivity/Raychem

Cable joint 1kV, LJTM

Art. no.: 0716208

Transition splice paper insulated 4-wire cable to plastic insulated 4-wire cable. The paper cable is rebuilt with heat-shrink tubing on phases and glued branch seal to enable splicing against plastic cable. Phase insulation is glued heat-shrink tubing and outer jacket glued folding sleeve. The screw splice sleeves cover a large area with few sises and do not require special tools.

Cable joint 1kV, LJTM

Gel splice, Reliseal, with connection terminal

HellermannTyton

Gel splice, Reliseal, with connection terminal

Art. no.: 0702833

Reliseal gel joints are suitable for cable joints in difficult environments, outdoors or in the ground. They can be used for splicing plastic cables. The molds: Part, openable, impact-resistant fire retardant. Perfect strain relief thanks to a patented system of cable glands. Filled with non-toxic RELICON gel, high breakdown strength 1kV. Ready to use. UV, aging and weather resistant No best before date. Compact dimensions with connection clamp. "

Gel splice, Reliseal, with connection terminal

Gel splice, Reliseal, with connection terminal

HellermannTyton

Gel splice, Reliseal, with connection terminal

Art. no.: 0702831

Relilight gel joints for electrical and telecommunications installations Two parts, black, openable, with strain relief, fire retardant, Enclosure class IP68 1.3m Filled with non-toxic Relicon gel, high breakdown strength 1kV. Nothing mixed, ready to use UV, aging and weather resistant. Compact dimensions with connection clamp. Certified according to DIN EN 60998-2-1: 2004

Gel splice, Reliseal, with splice clamp

HellermannTyton

Gel splice, Reliseal, with splice clamp

Art. no.: 0702826

Relifix gel joints for demanding installations in humid environments. Part, colored, openable, impact-resistant, flame retardant. Filled with Relicon non-toxic gel with high impact. Easy to install, UV, aging and weather resistant. Unlimited storage time. With clutch, ready for installation. Certified according to: DIN EN 50393 (corresponds to DIN VDE 0278-3963). "

Gel splice, Reliseal, with splice clamp

Gel splice, Reliseal, with splice clamp

SJKV - Shrink joint kit with screw joint sleeves, 5 to 5

SJKV - Shrink joint kit with screw joint sleeves, 5 to 5

Art. no.: 0718310

For jointing of 1 kV plastic insulated (PEX, PE, PVC) cables, 5-conductor.
The kit for contains: 5 shrink hoses for insulation over cormorant sleeves and 1 tread hose for the restoration of the outer mantle as well as erford screw joint scaels ."

Gelsnap A-C

Art. no.: 0702807

For cable splices 1 kV.

Cable joint 1kV LJSB, hot shrink joint

Cable joint 1kV LJSB, hot shrink joint

Art. no.: 0716504

For jointing of plastic insulated ground cable, 4-conductor, 1kV. Base insulation and outer casing are made of thick-walled adhesive shrink tubing. The joint contains screw cutter sleeves that cover a large area area with few sizes and do not require special tools. Including screw joint sleeves.

Cable joint 1kV MPS

Cable joint 1kV MPS

Art. no.: 0703100

For 1kV plastic insulated conductors including screw joints.

Pump cable joint 1kV

Pump cable joint 1kV

Art. no.: 0718410

1kV shrink joint for pump joint 3-4x1.5 - 2.5mm2

Showing 29 of 29