Order lines: 0

Ahlsell Products Electric Mains power supply equipment 06-09 06 Cable protection equipment

06 Cable protection equipment

Wells & well accessories

Cable protection/OPTO

Cable protection on rod and wall

Ahlsell's wide range of electricity includes luminaires, LEDs, light sources, cables, electrical network equipment, installation equipment, switchboards, fuses, appliance cabinets, busbar distribution, automation, tools, measuring instruments, telecommunications, data, security, lighting, heating products, fans, and heated towel rails. We have everything within electricity for professionals working with electricity, including electricians, electrical installers, property managers, automation technicians, and many more. Explore our wide range of products here or visit your nearest Ahlsell store.

Products (135)

End cap, all pipes

End cap, all pipes

Art. no.: 0661538

End caps for all pipes.

End cap, all pipes

End cap, all pipes

End cap, all pipes

End cap, all pipes

Cable chambers PP

Cable chambers PP

Art. no.: 0661973

Rise pipe, well without cover/bottom.
Made from recycled PP material for a lower fossil footprint.
Simpler well for splicing and distributing power cable and optical cable.
Hole cutting is done with a hole saw.

Cable chambers PP

Cable tube SRS PVC

Cable tube SRS PVC

Art. no.: 0661446

Level cable protection pipe of PVC. Supplied in 6 m lengths. Also used as SRN pipe.
Marked "Kraftkabel SRS".

Cable tube SRS PVC

Cable pipe SRE, 6 m

Cable pipe SRE, 6 m

Art. no.: 0661094

Pipelife cable protection pipe for installation in extreme environment and above ground (SRE-P) in lengths of 6 meters. Splicing is done via butt welding or alternatively with electric welding sleeves. Suitable for placement in urban environment.

Cable pipe SRE, 6 m

Chamber section C2, Melbye

Chamber section C2, Melbye

Art. no.: 0666350

C2 stands for Carriageway Fortress. That is, a very strong and powerful building that is intended to withstand everything! This matches C2 extremely well, it has namely been tested to withstand 60 tons. Is suitable for D400-applications, but can also be used to advantage as a loop-/splice well in the fibre network. C2 is a section well where the sections are 150mm high, but there is also a top section that measures 75mm. The latter is sealed and can only be used at the top. Manufactured by injection moulding of nitrogen foamed high density polyethylene. This makes it easy to install thanks to its low weight. Choose a two-part B125 or four-part cover D400, both of which are lockable with a Pentahead bolt. There is also a lockable inner cover for C2. It comes pre-installed in a section for simplicity’s sake and is supplemented with your own padlock.

Cover cast iron B125 for cable chamber FF9060

Cover cast iron B125 for cable chamber FF9060

Art. no.: 0666294

Choose the right kind of cover that the installation requires -A15 B125 or D400. The A15 cover to FF9060 is manufactured in HDPE and is lockable with a Penta Head Lock. The B125 cover is manufactured in cast iron and is suitable for installation in parking areas and areas with slow moving vehicles. The B125 cover is lockable with a Penta Head Lock and has a 70 or 120mm frame depending on the model. The D400 cover is manufactured in cast iron and is suitable for installations with high traffic. Both have 2 parts, one is lockable with a frame, the other is not lockable and has no frame. Note that different installation instructions are suitable for D400 applications. With a D400-installation the three highest sections should be intact. Therefore the well should be at least 5 sections deep in such an installation.

Cast iron cover C2 B125

Cast iron cover C2 B125

Art. no.: 0666352

Manhole C2-cover B125 Cast iron, lockable with pentahead bolt, two part, integrated moving frame of 85mm.

Cover for cable chamber FF12267

Cover for cable chamber FF12267

Art. no.: 0666349

Choose the right kind of cover that the installation requires - B125or D400. The B125 cover to FF12267 is manufactured in cast iron and is suitable for installation in parking areas and areas with slow moving vehicles. The B125 cover is lockable with a Penta Head Lock and has a 70mm frame. The D400 cover is manufactured in cast iron and is suitable for installations with high traffic. The come in four parts with a 140mm frame and lockable. Note that different installation instructions are suitable for D400 applications. With a D400-installation the three highest sections should be intact. Therefore the well should be at least 5 sections deep in such an installation.

Cover for cable chamber SW1730

Cover for cable chamber SW1730

Art. no.: 0666298

Cover for well SW1730 series.

Cover for cable chamber FF12267

Cover for cable chamber FF12267

Art. no.: 0666288

Choose the right kind of cover that the installation requires - B125or D400. The B125 cover to FF12267 is manufactured in cast iron and is suitable for installation in parking areas and areas with slow moving vehicles. The B125 cover is lockable with a Penta Head Lock and has a 70mm frame. The D400 cover is manufactured in cast iron and is suitable for installations with high traffic. The come in four parts with a 140mm frame and lockable. Note that different installation instructions are suitable for D400 applications. With a D400-installation the three highest sections should be intact. Therefore the well should be at least 5 sections deep in such an installation.

Cover for cable chamber FF12267

Smooth cable protection tube yellow, SRN

Smooth cable protection tube yellow, SRN

Art. no.: 0661104

Smooth cable protection pipe of recycled PP with cone sleeve, marked Power cable, EBR designation SRN.

Smooth cable protection tube yellow, SRN

Clamp AP, Magnelis

Clamp AP, Magnelis

Art. no.: 1501480E

Clamps for rigid pipes with oval holes to facilitate assembly! Surface treated with Magnelis® and approved according to corrosivity class C5 – perfect for Nordic climate and marine environments. Magnelis® also has a unique ability to self-heal in drilled holes, weld seams and cut surfaces.

Clamp AP, Magnelis

Clamp AP, Magnelis

Clamp AP, Magnelis

Cable tube PEH DV

Cable tube PEH DV

Art. no.: 0661704

Double-walled cable protection pipe, leaky, 6m yellow, made of PEH, marked Power cable, EBR designation SRN, with splice sleeve

Cable tube PEH DV

Skarvbrunn NDL10900 / 1

Skarvbrunn NDL10900 / 1

Art. no.: 5060920

Hexatronic NDL 10900 is an optical cable connection chamber for underground installations. It is normally used to accommodate splice closures or excess fiber optic cable. A waterproof lid with a rubber seal guarantees easy access. Horizontal and vertical reinforcements stabilize the chamber in soil and increase mechanical strength. The flat cover facilitates installation.

Marker ball

Art. no.: 4202567

Ball marker for searching media underground

Warning mesh optical fibre cable

Warning mesh optical fibre cable

Art. no.: 0668045

Marking net with seek-wire.
Labelled: "Svagström/Optokabel"
Labelled: “Telecoms cable”

Warning mesh optical fibre cable

Warning mesh optical fibre cable

Cable tube SRS

Art. no.: 0661123

Smooth cable protection pipe made of recycled PP with cone sleeve, marked Power cable, EBR designation SRN.

Joint sleeves sealed, Viper

Joint sleeves sealed, Viper

Art. no.: 0661430

Joint sleeves with sealing ring for smooth pipes.

Joint sleeves sealed, Viper

Opto LF Cable protection pipe

Opto LF Cable protection pipe

Art. no.: 0661242

Optical tubes on disposable drum Black low friction tubes (LF) with green stripes/markings. Friction coefficient ≤ 0.10 (For blowing optical cable).

Opto LF Cable protection pipe

Opto LF Cable protection pipe

Opto LF Cable protection pipe

Opto LF Cable protection pipe

Cable conduit protection, Capps

Cable conduit protection, Capps

Art. no.: 0665009

Capps is designed to provide a neat finish and allow for easy connection of cable protection directly to the tapered section. Perfect if you want to connect to, for example, an electric vehicle charger, solar panels, facade lighting, or other installations. Made of galvanized steel sheet with a Magnelis surface treatment that self-heals and restores corrosion protection even after cutting.

The top is easily cut along the marked line using a hacksaw or angle grinder. Then remove any sharp edges with a file for a safe installation. Fits most cable protectors on the market: 16 mm, 22 mm, 28 mm, 34 mm, and 68 mm.

Cable conduit protection, Capps

Cable tube SRS 3m Yellow splitable

Cable tube SRS 3m Yellow splitable

Art. no.: 0661350

Divisible cable protector tube in RS class.

Cable tube SRS 3m Yellow splitable

Cable chamber SW1730

Cable chamber SW1730

Art. no.: 0666341

These wells are cast in one unit. They are manufactured by injection moulding of HDPE (nitrogen foamed high density polyethylene). These wells withstand a vertical load of 18 tons. The well is 18"/45 cm tall. There is also a raising frame of 10"/25 cm. Suitable for both A15 and B125 installations. It is the installation environment that determines whether you need A15 (HDPE) cover or B125 (cast iron cover).

Cable chamber SW1730

Cable chamber SW1730

Cable tube split SRN, Snipp & Snapp®

Snipp och Snapp®

Cable tube split SRN, Snipp & Snapp®

Art. no.: 0667331

Snipp & Snapp® is a divisible cable protection conduit of very high quality. Snipp & Snapp® is approved by the Research Institutes of Sweden (SP) with regard to SRN classification. As far as installation is concerned, every conduit locks the next one. This means that the conduits cannot slide off from each other, exposing unprotected surfaces. No tools or previous knowledge is required in connection with installation. All conduits are black with locking lugs in different colours.

Cable tube SRE-P

Cable tube SRE-P

Art. no.: 0661801

Level, straight with conical sleeve. For open installation. Supplied in 6 m lengths.
Marked: "Kraftkabel".

Cable tube SRE-P

Cable tube SRE-P

Cable tube SRE-P

Cable tube SRE-P

Reclosable duct SRN KRAFT, DIVIO

Reclosable duct SRN KRAFT, DIVIO

Art. no.: 0661037

Split cable protection pipe for cable laying and for temporary installation. Also suitable for repair work on existing cable protection pipes as the inner diameter corresponds to standardized outer dimensions of double-walled cable protection pipes. Can be connected via a fixed socket. Possible angle is 15 degrees.
Marked POWER CABLE. With locking plate, SRN rated.

Reclosable duct SRN KRAFT, DIVIO

Reclosable duct SRN KRAFT, DIVIO

Cable duct smooth

Cable duct smooth

Art. no.: 0661103

Cable protection pipe Opto Rubber ring-sealed PVC Non-fire-spreading. Smooth cable protection pipe 110/103 6m, cone sleeve, leaky, GREEN PVC.

Cable duct smooth

1200 Opto well

Art. no.: 0661100

Pipelife coupling well for splicing and distribution of optical fiber. Possibility of up to 8 in / out optical tubes in fog up to 50mm and 8 in / out tubes in 110mm. Also possible for mounting a continuous 50mm optical tube.

Pull wire

Art. no.: 0661300

Pull cord/ twine.Breaking force 1350 N.

Marking net for power cable yellow, 300 mm

Marking net for power cable yellow, 300 mm

Art. no.: 9839028

Yellow marking net on a roll of 500 m in length without search wire. Width 300 mm.

Cable protection, straight, xShield 2.0

Cable protection, straight, xShield 2.0

Art. no.: 0666900

Robust cable protections equipped with center holes that simplify installation considerably. All cable protection details are surface treated with Magnelis which has superior corrosion protection, adapted for our Nordic climate, even in marine environments. A unique ability to self-heal in drilled holes, weld seams and cut surfaces, smoother and finer surface structure and last but not least – a significantly smaller impact on the environment.

Cable protection, straight, xShield 2.0

Cable protection, straight, xShield 2.0

Cable protection, straight, xShield 2.0

Cable protection, straight, xShield 2.0

Cable protection, straight, xShield 2.0

Cable tube SRN, smooth, yellow, in ring

Cable tube SRN, smooth, yellow, in ring

Art. no.: 0661406

Smooth tube in ring with pull wire (500 N). Labelled: “Power cable SRN”.

Cable tube SRN, smooth, yellow, in ring

Cable tube SRN, smooth, yellow, in ring

Union coupling, COMFIT

Union coupling, COMFIT

Art. no.: 0661941

Pressurised to 12 bar when blowing.

Union coupling, COMFIT

Union coupling Opto, Wawin

Union coupling Opto, Wawin

Art. no.: 0660772

Splice connector for optical fibre pipe. Pressure sealed up to 16 bar. When installing it is important that the pipe end is cut off straight and bevelled to reduce the risk that the rubber seal in the connection is damaged. The Split set collar is tightened by hand or can alternatively be tightened with a polygrip, NB should not be tightened too hard. Black colour with blue Split set collars

Union coupling Opto, Wawin

Cable tube SRN, UDV-R yellow, green

Cable tube SRN, UDV-R yellow, green

Art. no.: 0663135

Class: SRN.
In ring with wire thread. Made of polyethylene.
Colour: Yellow
Colour: Green

Combi well

Art. no.: 0663996

Combi well = container, the connection and loop well. Of PEM. Load 3 tonnes.

Marking tape MBP

Marking tape MBP

Art. no.: 0668027

For excavation.
Labelled “Power cable”.

Marking tape MBP

Cable tube SRE-P ring

Cable tube SRE-P ring

Art. no.: 0661812

For open installation or crossing of water. Supplied with pull wire.
Labelled: “Power cable SRE-P”.

Cable tube SRE-P ring

Cable tube SRE-P ring

Cable tube SRN, double-walled green

Cable tube SRN, double-walled green

Art. no.: 0661701

Double walled, corrugated pipe with a smooth inner wall made of PEH. Supplied with pre-mounted, sealed splice sleeve.
Labelled: “Low-voltage cable”.

Cable tube SRN, double-walled green

Cable tube SRN, double-walled green

Cable tube SRN, double-walled, yellow

Cable tube SRN, double-walled, yellow

Art. no.: 0661695

Double walled, corrugated pipe with a smooth inner wall made of PEH. Is delivered with pre-mounted splice sleeve Labelled: “Power cable SRN”.

Cable tube SRN, double-walled, yellow

Cable tube SRN, smooth, in halves

Cable tube SRN, smooth, in halves

Art. no.: 0661304

Smooth pipes in halves, to be spliced by offsetting. Supplied already connected.

Cable tube SRN, smooth, in halves

Cable tube SRN, smooth, in halves

Cable tube SRN, smooth, in halves

Cable tube SRN, smooth, in halves

Cable tube SRN, smooth, in halves

Joint sleeves sealed

Joint sleeves sealed

Art. no.: 0661036

Splice sleeves with sealing ring for splicing of cable conduits

Joint sleeves sealed

Joint sleeves sealed

Joint sleeves sealed

Elbow

Art. no.: 0663185

Flexible bend that fits all types of pipe.

Cable tube Tripla

Cable tube Tripla

Art. no.: 0663180

Class: SRS/SRN.
SRS as to stiffness class and SRN as to impact testing.
Pipe with smooth inside and outside. Welded-on sleeve with built-in sealing ring.

Cable tube Tripla

Cable tube Tripla

Elbow SRS

Art. no.: 0661822

Smooth fixed bends with conical sleeve. Used for installation in the open.

Cable tube SRN DVS, corrugated, yellow, in ring

Cable tube SRN DVS, corrugated, yellow, in ring

Art. no.: 0661075

Corrugated tube in ring with pull wire (500 N). Smooth inside. For power cable.

Cable tube SRN DVS, corrugated, yellow, in ring

Cable tube SRN DVS, corrugated, yellow, in ring

Optical fibre cable protector pipes for direct laying on ring PEH

Optical fibre cable protector pipes for direct laying on ring PEH

Art. no.: 0661264

Cable protection tube OPTO PEH Black with green stripes. Low friction pipe (LF) on a hoop with or without pull wire for blowing/pulling optical cable.
Breaking force pull wire 500 N.

Optical fibre cable protector pipes for direct laying on ring PEH

End plug tight, expandable

End plug tight, expandable

Art. no.: 0661986

End plug opto sealed.

End plug tight, expandable

Splice pipe

Art. no.: 0661942

Straight pressurised splice pipe , withstands 16 bar.

Cable tube, VIPER 3 SN8, Triple-walled tube Green

Cable tube, VIPER 3 SN8, Triple-walled tube Green

Art. no.: 0661423

Viper 3, Three way cable protection pipe with sealed splice sleeve.

Cable tube, VIPER 3 SN8, Triple-walled tube Green

DVS Corrugated cable protection pipe, SRN

DVS Corrugated cable protection pipe, SRN

Art. no.: 0661168

Green DVS, for low-voltage cable. In ring with wire thread. Smooth inside.

DVS Corrugated cable protection pipe, SRN

Cable tube VIPER 3 SN8, Triple-walled tube yellow

Cable tube VIPER 3 SN8, Triple-walled tube yellow

Art. no.: 0661422

Viper 3, Three way cable protection pipe with sealed splice sleeve.

Cable tube VIPER 3 SN8, Triple-walled tube yellow

Cable tube VIPER 3 SN8, Triple-walled tube yellow

Elbow Flex bend seal Viper

Elbow Flex bend seal Viper

Art. no.: 0661428

Flexible 0-90 º, triple-walled polyethylene, PEH, with tight joint sleeve.

Elbow Flex bend seal Viper

Showing 52 of 135