Heating products 85-89

Ahlsell's wide range of electricity includes luminaires, LEDs, light sources, cables, electrical network equipment, installation equipment, switchboards, fuses, appliance cabinets, busbar distribution, automation, tools, measuring instruments, telecommunications, data, security, lighting, heating products, fans, and heated towel rails. We have everything within electricity for professionals working with electricity, including electricians, electrical installers, property managers, automation technicians, and many more. Explore our wide range of products here or visit your nearest Ahlsell store.

Products (217)
Heating cable ETL Frostguard
Raychem
Heating cable ETL Frostguard
Art. no.: 8946104
FrostGuard is complete packaging with ETL-10 self-limiting heating cable for frost protection of pipes, 10 W/m. The casing is PVC-free. FrostGuard can be installed both on and inside water pipes. For internal assembly, the heating cable is supplemented with a T- or Y-connection. The T-coupling also requires a watertight grommet, but this is included in the Y-coupling.The heating cable can also be crossed without risk of overheating.

Delivered in ready lengths, equipped with plug (IP44) and two meter connection cable, installation instructions and universal sign. Minimize operating costs by installing FrostGuard-ECO together with FrostGuard. Energy savings can be up to 80% compared to a system without a thermostat. SEMKO approved.
Heating cable ETL FrostguardHeating cable ETL FrostguardHeating cable ETL FrostguardHeating cable ETL FrostguardHeating cable ETL Frostguard
Heat fan VF3 with cord and plug 400V
El-Björn
Heat fan VF3 with cord and plug 400V
Art. no.: 8726312
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The control grid at the front holds the airflow together and gives a long throw
Intended for both temporary and permanent heating, IP 44 allows it to withstand humid spaces
Stepless thermostat 5 ° - 35 °, controls heat and fan or just heat only. Selected with rocker switch on control panel
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel, the fan is equipped with a post-cooling thermostat
Does not load N (zero)
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G1.5 / 416P6 CEE
Heat fan VF 9
El-Björn
Heat fan VF 9
Art. no.: 8726332
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The control grid at the front holds the airflow together and gives a long throw
Intended for both temporary and permanent heating, IP 44 allows it to withstand humid spaces
Stepless thermostat 5 ° - 35 °, controls heat and fan or just heat only. Selected with rocker switch on control panel
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel, the fan is equipped with a post-cooling thermostat
Does not load N (zero)
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G2.5 / 416P6 CEE
Frost protection cable a-collection
a-collection
Frost protection cable a-collection
Art. no.: 8935026
Pipe freeze protection is used in spaces that are unheated or have a tendency to freeze in winter. The freeze protection cable protects water pipes in summer cottages, wells, work sheds, barns, stables, cold garages, suspended foundations and other spaces or plants. It is completely free from PVC and lead and is therefore the best alternative from an environmental point of view. Approved for both external and internal pipe installation.

The cable is self-regulating and automatically controls the output according to the ambient temperature. It gives somewhat more output in internal installations compared to external and manages to freeze-protect pipes up to 50 mm at -25°C, provided that the pipe has at least 30 mm insulation or is buried at least 50 cm deep. For internal installation, a watertight lead through is used (Part no. 8935000) which is ordered separately. Output: 10W/m at +5°C in metal pipe.

The cable must, irrespective of length, always be connected to 230 V and protected by a 30 mA earth fault breaker. It has a homogeneous self-regulating core for optimum heat conduction. A multi-purpose braid for optimum electrical protection and excellent insulation properties. Plug IP44 and 2 m connecting cable. Approved by Semko for installation in pressurised drinking water pipes.
Heating cable T2Blue+ 12 W/m
Raychem
Heating cable T2Blue+ 12 W/m
Art. no.: 8941221
Series resistive two-wire cable in a spool package. Diameter: 5 mm with attached cold lead (2.5 m). The heating cable is meter-marked, PFAS-free and has a built-in cable memory for easy installation. Compatible with fastening tapes, cable clips, membranes and glue sticks. Tested according to IEC/IEEE 62395-1:2024, high mechanical resistance (1500 N).

The package contains a sensor hose, nameplate and a programmable touch-swipe clock thermostat with WIFI. The thermostat allows remote control via app or voice control. SENZ WIFI has a white center plate and frame in color RAL9003 (type Exxact).

100W/m² : c-c 120 mm
120W/m² : c-c 100 mm
150W/m² : c-c 80 mm

Maximum power against combustible surfaces: 120 W/m² (c-c distance 100 mm). The system meets the requirements for ECO design. 12-year warranty on thermostat and heating cable, with the option to extend to 20 years when installed by a Certified PRO installer.
Heating cable T2RED for all plastered floors
Raychem
Heating cable T2RED for all plastered floors
Art. no.: 8946200
T2Red is a self-regulating heating cable for floor heating, 5-15W/metre, regulating the surface power output if the floor is insulated by a
carpet or suchlike. This reduces the risk of excessive temperatures at the same time as it is energy-efficient and provides the correct output across the entire room area depending on the conditions. This means that with a cold outer wall the power output increases and with strong sunlight the output decreases. T2Red together with T2Reflecta insulation boards and a timer thermostat can give up to 45% energy savings. The thermal cable is metre labelled. Max connection length 100m/10A, approx. 10 m². For larger areas, use a contactor.

T2Red is a PVC-free heating cable, does not emit any electrical fields and negligible magnetic fields.
T2Red is delivered in running metres on a drum, up to 300 m, and can be cut to the exact desired length. Thereafter a connection and termination kit is fitted. The heating cable can also be crossed without any risk of overheating. Connected directly to the thermostat.

Intended for plastering in levelling filler 10-15 mm for all types of top floors and spaces, e.g. in bathrooms, kitchens, bedrooms, halls and living rooms. In dry areas T2Reflecta insulation boards can be used, 13 mm: floating floor for wood, laminate and plastic carpeting. For clinkers, the boards must be attached with T2Reflecta adhesive. The upper side of T2Reflecta insulation boards is covered with T2Reflecta P-fix primer, thereafter an optional C2F-fix is used to attach the clinker tiles. Alternatively, the clinker tiles can be attached directly using T2Reflecta adhesive.
Heating fan with cord and plug
El-Björn
Heating fan with cord and plug
Art. no.: 8726300E
Durable hot air fan in powder-coated galvanized sheet steel. Equipped with a unique grid that increases the throw length. Can be mounted on a wall with included suspension bracket. Supplied with 2 meter cable and plug. The main area of use is warehouses, workshops, storage and similar spaces. Stepless thermostat 5 ° C - 35 ° C, controls heat and fan When the temperature is reached, the fan is switched off to save energy Overheating protection is restored by pulling out the plug This product is only suitable for well-insulated spaces or occasional use.

Corrosion-resistant galvanized sheet steel
Powerful fan motor with low noise level
Unique break that increases the throw length
Intended for both temporary and permanent heating
Overheating protection
Mechanical thermostat for room temperature control
Heating fan with cord and plug
Underfloor heating package T2Blue+ 12W/m, with digital thermostat and accessories
Raychem
Underfloor heating package T2Blue+ 12W/m, with digital thermostat and accessories
Art. no.: 8941201
Series resistive two-wire cable in a spool package. Diameter: 5 mm with attached cold lead (2.5 m). The heating cable is meter-marked, PFAS-free and has a built-in cable memory for easy installation. Compatible with fastening tapes, cable clips, membranes and glue sticks. Tested according to IEC/IEEE 62395-1:2024, high mechanical resistance (1500 N).

The package contains a sensor hose, nameplate and a programmable touch-swipe clock thermostat with WIFI. The thermostat allows remote control via app or voice control. SENZ WIFI has a white center plate and frame in color RAL9003 (type Exxact).

100W/m² : c-c 120 mm
120W/m² : c-c 100 mm
150W/m² : c-c 80 mm

Maximum power against combustible surfaces: 120 W/m² (c-c distance 100 mm). The system meets the requirements for ECO design. 12-year warranty on thermostat and heating cable, with the option to extend to 20 years when installed by a Certified PRO installer.
Heating fan VFBR 9 - for flammable spaces
El-Björn
Heating fan VFBR 9 - for flammable spaces
Art. no.: 8726366
Robust construction in corrosion-resistant galvanized steel sheet, can easily be hung on the wall with the supplied bracket
Powerful fan motor with low noise level
The elements are designed for optimum air flow and rapid heating
The fan design gives a long throwing length of the air stream
Intended for both temporary and permanent heating, IP 55 allows it to be used in flammable spaces eg. woodworking premises, barns
Stepless thermostat 5 ° - 35 °
Supplied with 2m cable with CEE plug 16A / 400V
The overheating protection is reset manually on the control panel
Does not load N (zero)
Equipped with zero voltage release
Mechanical thermostat for room temperature control

Incoming 5-pole / 400V 16A CEE 416-6 1 pcs
Incoming Cable Length / Cable Area / Connection 2.0m / 4G2.5 / 416P6 CEE
Ribbed pipe radiator without power selector, sand-filled, for flammable areas
Frico
Ribbed pipe radiator without power selector, sand-filled, for flammable areas
Art. no.: 8565202
Ribbed pipe radiators are very robust and durable. The rough comb flanges provide large heat emitting surface and makes the radiator compact. Equipped with protective grille which provides high level of safety. Comb pipe is approved for wet rooms and can therefore be used in e.g. laundries and dairies. Other application areas are clothes lockers, changing rooms and cycle storage.
Type 127 has no effect selector, is approved for installation in flammable spaces and is recommended for agricultural operation buildings.
Resettable overheat protection covers the entire length of the radiator. The comb pipe radiator is protected against overheating even if only part of it is covered. The radiators should be permanently fitted, horizontally on walls with overheating protection on the top of the device. Colour: dark green, RAL6005, NCS 7020-B90G. Approved by SEMKO and CE marked.
Hot air fan stationary, Cat -series
Frico
Hot air fan stationary, Cat -series
Art. no.: 8710001
Panther is a series of very silent and efficient fan heaters for stationary use. For heating, drying and ventilation of e.g. workshops, sorts halls, shops, gathering venues and drying rooms. Panther is equipped with a 5 - 35ºC thermostat.
The desired output/speed can be set in the control panel, available as an accessory. Several devices can be controlled from the same operation panel.
The motor is a 1-phase model, with ball bearings and equipped with a thermal contact. Panther 6-15 kW has an alarm outlet with the possibility to connect to DUC. Resettable overheat protection. Corrosion-protected housing made of white-lacquered sheet steel. The fan can be mounted on a flexible wall bracket, which enables directing the air stream downwards and to the sides.
Output stage: 0-1/2-1, noise level 39-47 db(A).
Connection voltage: 6-15 kW: 400V/3, SE135: 440V/3 or 500V/3
Housing: splash-proof design IP44. Approved by SEMKO and CE marked.
Hot air fan stationary, Cat -seriesHot air fan stationary, Cat -seriesHot air fan stationary, Cat -series
Panel radiator oil-filled, LVI Yali Comfort
LVI
Panel radiator oil-filled, LVI Yali Comfort
Art. no.: 8501010
For new production or renovation, Yali Comfort is a fantastically simple alternative for heating the home. Yali Comfort gives a very comfortable indoor climate with its closed heating technique. Electronic thermostat in an analogue version and a mode knob for temperature/operation gives this oilfield radiator a large range of functions that can be easily controlled by the user. The surface temperature can be reduced to 75° C or 60° C, which is perfect in pre-schools or bathrooms. Yali Comfort can be connected to an external wired clock for time-controlled operation. Yali Comfort it is available in versions that 230V and 400V and in a scale from 250W till 1500W, and in heights of 300 mm and 500 mm. Yali Comfort replaces Alata.
Advanced thermostat with precise regulation. Several temperature reduction options: 3.5˚C–15˚C.

The surface temperature can be reduced to 75° C or 60° C. The temperature ranges 75° C and 60° C reduce the output of the radiator to 70% respectively 55% for single radiator and 90% respectively 80% a double radiator.
The thermostat housing is made in self-extinguishing and UV-resistant plastic ABS-PC. V0
Temperature reduction is activated manually or via a central timer switch and separate N-cable.
There is a cable harness on the radiator with “plug-in contact” for connection of the radiator and enclosed wall socket.
Master/slave connectable (unlimited numbers), Yali D/P/R
Self-limiting heating cable ETL for frost protection of pipes
Raychem
Self-limiting heating cable ETL for frost protection of pipes
Art. no.: 8946000
ETL-10 is a self-regulating heating cable for the freeze protection of pipes, 10W/m. The outer jacket is PVC-free. The installation is simple and the heating cable can be installed both on and inside water pipes. Max installation length: 60 m internally, 100 m externally. ETL-10 is supplied in running metres on a drum, up to 305 m, and can be cut to the exact desired length. Thereafter a connection and termination kit is fitted. The heating cable can also be crossed without any risk of overheating.

ETL-10 is intended for permanent installation with thermostat T2TraceTemp, earth fault breaker and an external sensor. Energy savings can be up to 80% compared with an installation without a thermostat.

For internal installation, the installation is complemented with a T or Y connector. For a T-connector, a waterproof lead through is also required. This is, however, included in the Y-connector. Complement with an earth fault breaker. ETL-10 is the only heating cable available in the market which is S-marked and food-grade approved by SITAC for internal installation in drinking water pipes. It does not release any substances or odd tastes
Showing 52 of 217