Order lines: 0

Ahlsell Products CoolingCompressors

Compressors

Semi-hermetic compressors

Scroll compressors

Fully hermetic compressors

Are you a refrigeration installer, or service technician, or do you work in the industry? Ahlsell is committed to providing you with the right compressors for the job. In addition to function, quality, and a wide range of voltages, we also offer a wide range of cooling or heat pump applications. You can find both semi-hermetic and fully hermetic compressors here. We also offer rotary compressors that are semi-hermetic and fully hermetic. With the right choice of compressors, you will be able to maximize your usage. In our product range, we are able to offer a wide range of major suppliers. Visit your nearest Ahlsell store or browse our wide range of compressors online.

Embraco Startbox, complete

Embraco Startbox, complete

Art. no.: 1262109

Complete start box for Embraco compressors contains required Klixon, relay and capacitor connected to the connection terminal

Tecumseh Operating Capacitor

Tecumseh Operating Capacitor

Art. no.: 5117000

Operation capacitor, check operating area, and voltage

Embraco compressor NEK for R134a, cooling, 230V

Embraco compressor NEK for R134a, cooling, 230V

Art. no.: 4112303

230V 1-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco Compressor NEK/NT for R134a, refrigerated, single phase

Embraco Compressor NEK/NT for R134a, refrigerated, single phase

Art. no.: 4111281

230V 1-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco compressor NJ for R134a, refrigerated, single phase

Embraco compressor NJ for R134a, refrigerated, single phase

Art. no.: 4111263

230V 1-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R134a, refrigerated, three phase

Embraco compressor NJ for R134a, refrigerated, three phase

Art. no.: 4111267

400V 3-phase 50Hz. Working range -15°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. Delivered with a connection for Rotalock valve on the suction side.

Embraco compressor EMT for R404A, cooling, 230V

Embraco compressor EMT for R404A, cooling, 230V

Art. no.: 4112405

230V 1-phase 50Hz. Working range -20°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco compressor NEK for R404A, freezer, 230v

Embraco compressor NEK for R404A, freezer, 230v

Art. no.: 4111350

230V 1-phase 50Hz. 230V 1-phase 50Hz. Working range -40°C to -10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Embraco compressor NT for R404A, refrigerated, single phase

Embraco compressor NT for R404A, refrigerated, single phase

Art. no.: 4111361

230V 1-phase 50Hz. Working range -20°C to +10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R404A, freezer, three phase

Embraco compressor NJ for R404A, freezer, three phase

Art. no.: 4111345

400V 3-phase 50Hz. Working range -40°C to -10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R404A, freezer, single phase

Embraco compressor NJ for R404A, freezer, single phase

Art. no.: 4111373

230V 1-phase 50Hz. Working range -40°C to -10°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling. * Including start box.

Embraco compressor NJ for R407C, three phase

Embraco compressor NJ for R407C, three phase

Art. no.: 4111477

400V 3-phase 50Hz. Cooling effect is indicated for condensation + 45°C.

Embraco starting relay

Embraco starting relay

Art. no.: 1253014

Check the model in current spare parts list

Embraco Start Capacitor

Embraco Start Capacitor

Art. no.: 8115204

Start condenser, checks operating area and voltage

Embraco Operating Capacitor

Embraco Operating Capacitor

Art. no.: 2253002

Operation capacitor, check operating area, and voltage

Copeland Digital Capacity Control for Copeland Digital Scrolls

Copeland Digital Capacity Control for Copeland Digital Scrolls

Art. no.: 6897781

Kist for capacity regulation of Copeland Scroll Digital.

Compressor K

Art. no.: 69002029

Air-cooled semi-hermetic compressors for direct start 400V 3-phase 50Hz. All of the cooling effect is specified in accordance with EN12900 at 0°C undercooling, condensation temperature +40°C and +20°C suction line temperature. For R134a at -10°C, and for R404A at +35°evaporation temperature. NOTE: Some compressors with “large" electric motors are also approved for cold operation with R404A up to +7° C evaporation temperature, see separate data sheet. All compressors are delivered with mounting springs and with closing valves. Crankcase heater and cooling fan are ordered separately.
Approved for the majority of HCF and HFO refrigerants, contact Ahlsell Kyl for further information.

Compressor L

Art. no.: 69002078

Air-cooled direct start 400V 3-phase 50Hz. All of the cooling effect is specified in accordance with EN12900 at 0°C undercooling, condensation temperature +40°C and +20°C suction line temperature. For R134a at -10°C, and for R404A at +35°evaporation temperature. NOTE: Some compressors with “large" electric motors are also approved for cold operation with R404A up to +7° C evaporation temperature, see separate data sheet. All compressors are delivered with mounting springs and with closing valves. Crankcase heater and cooling fan are ordered separately.
Approved for the majority of HCF and HFO refrigerants, contact Ahlsell Kyl for further information.

Copeland ZR, Solder / * Rotalock

Copeland ZR, Solder / * Rotalock

Art. no.: 6858090

Solder connection 400V 3-phase 50Hz. All of the cooling outputs are specified in accordance with EN12900 at 0Ksupercooling and 10K suction gas over heating, condensation temperature +40°C. The cooling outputs given below are specified at -10°C for R134a and at +5° for R407C at evaporation temperature. The compressor is delivered without a crankcase heater. The models ZR94 to ZR190 are supplied without mounting kit (rubber feet).
Approved for the majority of HCF and HFO refrigerants, contact Ahlsell Kyl for further information.

Copeland ZB, Rotalock

Copeland ZB, Rotalock

Art. no.: 6858251

For rotalock connection, including oil sight glass 400V3-phase 50Hz. Approved for most HCF and HFO refrigerants, such as R404A, R407F, R407A, R407C, R450A, R448A, R449A, R513A and R134a. Contact Ahlsell for more information. The cooling outputs in the table are specified in accordance with EN12900 at 0°C supercooling and +20°C suction gas temperature, condensation temperature +40°C and at -10°C evaporation temperature. The compressor is delivered without a crankcase heater or rotalock valves.

Copeland ZF, Rotalock

Copeland ZF, Rotalock

Art. no.: 6858295

For rotalock connection including oil sight glass, 400V 3-phase 50Hz.Cooling via liquid injection.
Compressor ZF09 - ZF18 supplied with DTC/LIV valve and hot gas thermostat. Compressor ZF24 - ZF48 supplied with hot gas thermostat, power relay and capillary tubes kit.
All of the cooling effect is specified in accordance with EN12900 at 0°C undercooling and +20°C suction line temperature, condensation temperature +40°C. The cooling outputs given below are specified at -35°C evaporation temperature. The compressor is supplied without crankcase heater and rotalock valves.
Approved for the majority of HCF and HFO refrigerants, contact Ahlsell Kyl for further information.

Copeland ZF-EVI Rotalock, for Economizer Coupling

Copeland ZF-EVI Rotalock, for Economizer Coupling

Art. no.: 6858302

For rotalock connection, including oil sight glass 400V3-phase 50Hz. Approved refrigerant is R404A and R407A. Cooling by gas injection via economiser connection (undercooler and expansion valve must be ordered separately). This connection increases the installation’s COP.
All of the cooling effect is specified in accordance with EN12900 at 0°C undercooling and +20°C suction line temperature, condensation temperature +40°C. The cooling outputs are specified at -35°C evaporation temperature. The compressor is supplied with hot gas thermostat but without crankcase heater and rotalock valves.
Approved for the majority of HCF and HFO refrigerants, contact Ahlsell Kyl for further information.

Copeland ZH, solder, for heat pump application, R407C

Copeland ZH, solder, for heat pump application, R407C

Art. no.: 6858480

400V 3-phase 50Hz. The ZH compressors are made for heat pump applications. The following table shows heat outputs at an evaporation temperature of -10°C, condensation temperature +50°C, suction gas superheat 5K and supercooling 4K. Work area -15°C to +15°C. Solder connection.

Copeland crankcase heater

Copeland crankcase heater

Art. no.: 6897703

Band type, 230V 1-phase

Copeland Capacitors

Copeland Capacitors

Art. no.: 6897735

For 1-phase operation (PFJ)

Copeland Thermistor Relay

Copeland Thermistor Relay

Art. no.: 6897768

Thermistor relays for scroll compressors 230V and 24V.. Check the correct details in the current spare parts list.

Copeland Hot Gas Thermostat

Copeland Hot Gas Thermostat

Art. no.: 6897502

Mounts onto the hot gas line, stops the compressor at a given cut-off temperature

Copeland Capillary Tube for Liquid Injection

Copeland Capillary Tube for Liquid Injection

Art. no.: 6897714

The injection valve is used for cooling of the scroll compressors in different applications. Branch from the liquid conduit connects to the valve’s inlet which, with the help of a bulb placed at the top of the compressor, ensures that the compressor does not overheat by injecting “liquid" when needed. Highly energy efficient solutions can be obtained by using different connection options such as so-called economiser connections. Contact us for further information. LIV is the latest model and comes in different versions with different connections, angled design and for wet injections. The DTC model will be phased out.

Copeland Connector for Solder to Rotalock, in pairs

Copeland Connector for Solder to Rotalock, in pairs

Art. no.: 6897792

Compatible with ZR/ZRD/ZS/ZH/ZHI/ZP/ZPD, check the connection dimension. Used on compressors with solder connection for suction and pressure to enable connection to the rotalock valve.

Copeland mounting feet at parallel coupling (kits)

Copeland mounting feet at parallel coupling (kits)

Art. no.: 6801532

Available in different degrees of hardness

Copeland mounting feets (kits)

Copeland mounting feets (kits)

Art. no.: 6801530

Available in different degrees of hardness

Maneurop Scroll Compressor SZ R407C

Maneurop Scroll Compressor SZ R407C

Art. no.: 4100455

Scroll compressors 400V 3-phase 50HZ. Solder connections on SZ84/90/100/110 and 120 others for rotalock connection, prepared for parallel operation. All cooling outputs are specified at 0K supercooling and 10K superheat and condensation temperature +40°C. Evaporation and condensation temperatures are specified at their respective dew points.

Tecumseh compressor THB, AE for R134A, cooling, 230V

Tecumseh compressor THB, AE for R134A, cooling, 230V

Art. no.: 5103110

230V 1-phase 50Hz. Working range -25°C to +15°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Tecumseh compressor AE for R404A, freezer, 230V

Tecumseh compressor AE for R404A, freezer, 230V

Art. no.: 5104395B

230V 1-phase 50Hz. Cooling effects specified according to EN EN12900, condensing temperature +40°C, return gas temperature +20°C and undercooling 0K. Working range -40°C to -10°C.

Tecumseh compressor TAJ for R404A, freezer, three phase

Tecumseh compressor TAJ for R404A, freezer, three phase

Art. no.: 5106164

400V 3-phase 50Hz (1"-14 rotalock valve for suction side included). Cooling effects specified according to EN EN12900, condensing temperature +40°C, return gas temperature +20°C and undercooling 0K. Working range -40°C to -10°C.

Tecumseh compressor TAG for R404A, freezer, three phase

Tecumseh compressor TAG for R404A, freezer, three phase

Art. no.: 5108186

400V 3-phase 50Hz (1 1/4"-12 rotalock valve for suction side and 1 1/4"-12 for pressure side not included). Cooling effects specified according to EN EN12900, condensing temperature +40°C, return gas temperature +20°C and undercooling 0K. Working range -40°C to -10°C.

Tecumseh compressor AE for R404A, cooling, 230V

Tecumseh compressor AE for R404A, cooling, 230V

Art. no.: 5103404

230V 1-phase 50Hz. Working range -25°C to +15°C. Cooling effects specified according to EN12900, condensing temperature + 45 ° C, return gas temperature + 20 ° C, no undercooling.

Tecumseh compressor AJ for R407C, AC, single phase

Tecumseh compressor AJ for R407C, AC, single phase

Art. no.: 5109051

230V 1-phase 50Hz. Low starting torque. Domestic and heat pump compressors. Solder connection for suction and pressure.
Cooling effects specified in accordance with EN12900, condensation temperature +50°C, supercooling 0K and
suction gas superheat 10K.

Tecumseh Start relay R134a

Tecumseh Start relay R134a

Art. no.: 5116159

Controls model in the current spare parts list

Tecumseh Start relay R404A

Tecumseh Start relay R404A

Art. no.: 5116575

Controls model in the current spare parts list

Tecumseh motor protection R404A

Tecumseh motor protection R404A

Art. no.: 5117316

Check motor protection in the current spare parts list

Tecumseh Start Capacitor

Tecumseh Start Capacitor

Art. no.: 5116840

Start condenser, checks operating area and voltage

Tecumseh Crankcase Heater

Tecumseh Crankcase Heater

Art. no.: 5119210

Tecumseh rubber feet

Tecumseh rubber feet

Art. no.: 5116760

Tecumseh Valve and Sealing Cap

Tecumseh Valve and Sealing Cap

Art. no.: 5119062

Danfoss PTC for LST Start

Danfoss PTC for LST Start

Art. no.: 1030011

Danfoss Start Relay for HST Start

Danfoss Start Relay for HST Start

Art. no.: 1176000

Start relay for high starting torque

Danfoss starting device

Danfoss starting device

Art. no.: 1177029

Complete set-up equipment

Danfoss Start Capacitor

Danfoss Start Capacitor

Art. no.: 1175015

Danfoss Mounting Foot

Danfoss Mounting Foot

Art. no.: 1191917

Rubber mounting

Maneurop Piston Compressor MTZ

Maneurop Piston Compressor MTZ

Art. no.: 4100362

Fully hermetic piston compressors 400V 3-phase 50HZ. Rotalock connections, prepared for parallel operation. All cooling outputs are specified at 8,3K supercooling and 11,1K superheat, condensation temperature +45°C. The cooling outputs given below are specified at +5°C for R407C, for R134a at +10° and for R404A at -30°C. The compressors are delivered without a crankcase heater.

Maneurop Piston Compressor NTZ for R404A / R452A

Maneurop Piston Compressor NTZ for R404A / R452A

Art. no.: 120F0226

Fully hermetic piston compressors 400V 3-phase 50HZ. Rotalock connections. Important! It is necessary to use expansion valves with MOP-function - a start relief valve in systems with NTZ compressors. Max suction pressure is 4 bar(g). All cooling outputs are specified at 0K supercooling and 10K superheat and condensation temperature +40°C. Evaporation and condensation temperatures are specified at their respective dew points.

Showing 52 of 98