Order lines: 0

Ahlsell Products CoolingInstallation accessories

Installation accessories

Burnout & suction filter

Oil & liquid separator

Refrigerant container

Vibration damper

Condensation water pumps

Accessories heat pumps

Consoles and tripod

Are you involved in installation and assembly? We at Ahlsell assist you with refrigerant installation accessories. If you have the right installation accessories, you will be able to perform professional repairs and installations. In this section, you'll find drier filters with built-in refrigerant containers. If you are looking for a condensation water pump for mounting under a split unit, you will also find this. In our assortment, you'll find the most major brands. Browse our online store for refrigerant installation accessories or visit your local Ahlsell store.

Ground Bracket

Art. no.: 7133074

Platinum WIFI

Art. no.: 7124145

WiFi module for Innova Platinum. OSK102 is a USB stick that is easily connected to the indoor unit and thus enables remote control of the heat pump via mobile phone or tablet. Default: IEEE 802.11b / g / n

Vibration Dampers

Vibration Dampers

Art. no.: 7133086

Vibration damper in the rubber shock absorption, suitable for air-source heat pumps and less split unit.

7133086 Kit of 4, M8 bolt L=20mm, rubber H=19mm W=30mm. Including the nuts and washers. -20°C
7145582 M8 bolt L=20mm, rubber H=30mm W=30mm. Excluding the nuts and washers. -20°C

Condensation water hose 100m

Condensation water hose 100m

Art. no.: 7069135

Condensation water hose 100 m, 4 x 6 mm.

Aspen ERRP Condensation water pump

Aspen ERRP Condensation water pump

Art. no.: 24067084

Aspen small-profile condensation water pumps for refrigerated display cases and cooling appliances.
Available in 2 versions: “Top Inlet" and “Side Inlet"

Vibration Dampers

Vibration Dampers

Art. no.: 4204308

Vibration dampers in stainless steel with soldered copper connections

Vibration Dampers - Soleco

Vibration Dampers - Soleco

Art. no.: 7133097

Vibration damper with a spiral spring for superior insulation capability. Delivered in 4 unit cartons.
Suitable for air-to-air heat pumps and smaller split assemblies.

Heating Cables for Dewatering Drains - ITE

Heating Cables for Dewatering Drains - ITE

Art. no.: 7066840

Cable with live, neutral and earth. Outer and inner cables made of silicone.

Cable

Art. no.: 804570

Cable for Alco ASC coil

Dryer filter "Catch All"-Flare

Dryer filter "Catch All"-Flare

Art. no.: 7010420

All ratings are given in kW and as per ARI710-86 and at a vapourisation temp. of -15°C, cond .temp. +30°C and Δp=0.07 bar.
Max nominal pressure 44.8 Bar

Dryer filter "Catch All" - Flare

Dryer filter "Catch All" - Flare

Art. no.: 7010410

All ratings are given in kW and as per ARI710-86 and at a vapourisation temp. of -15°C, cond .temp. +30°C and Δp=0.07 bar.
Max nominal pressure 44.8 Bar

Dryer Filter ADK - Flare

Dryer Filter ADK - Flare

Art. no.: 7170800

Max operating pressure 46
Corrosion-resistant epoxy paint
high adsorption capacity for water and acid
High filtering capacity
All ratings are given in kW and as perARI710-86 at a vaourisation temp. o -15°C, cond.temp. +30°C
and Δp=0.07 bar.

Drying Filter ADK - Solder

Drying Filter ADK - Solder

Art. no.: 7170820

Max operating pressure 43 bar.
Corrosion-resistant epoxy paint
high adsorption capacity for water and acid
High filtering capacity
All ratings are given in kW and as per ARI710-86 and at a vapourisation temp. of -15°C, cond .temp. +30°C and Δp=0.07 bar.

Drying Filter DMC with Built-in Refrigerant Container - Solder

Drying Filter DMC with Built-in Refrigerant Container - Solder

Art. no.: 2314167

Max operating pressure: 42 bar.
Dry filter optimised for HFC refrigerant and polyolester (POE) or polyalkyl glycol (PAG) oils.
100% molecular sieves.
Temperature range: -40 ° C - + 70 ° C.
Approved as HP container as per PED/97/23/EG a3p3.

Capillary Tube Drying Filter

Capillary Tube Drying Filter

Art. no.: 7067491

DE.NA SRL
For all HFC, CFC and HCFC

Dry filter, reversible-Flare

Dry filter, reversible-Flare

Art. no.: 7010840

All ratings are given in kW and as per ARI710-86 and at a vapourisation temp. of -15°C, cond .temp. +30°C and Δp=0.07 bar.
Max nominal pressure 45 Bar

Filter Inserts

Art. no.: 7170012

For Alco FDS filter housing.

Filter Inserts

Art. no.: 7011150

Filter Inserts

Art. no.: 006969

For filter housings Alco ADKS-Plus and FDH or ADK 300/400.

Accessories Alco Drying Filter Housing

Accessories Alco Drying Filter Housing

Art. no.: 003710

Burn-Outfilter - Solder

Burn-Outfilter - Solder

Art. no.: 7011980

Catch-All Burnout filter cleans out the refrigerant system, ridding it of moisture, metal chippings, dirt, and acids. It can be mounted in both the suction and fluid lines. t Burn-out filter contains a special mixture of molecular sieve, activated aluminium, and activated carbon together with a very effective filter.
The flow capacity in the fluid line is in accordance with the ARI 710-86 standard.
TE = -15ºC, Tc = 30ºC, ΔP = 0.07 bar
Max nominal pressure 44.8 Bar

Suction Filter - Solder

Suction Filter - Solder

Art. no.: 7011670

Protects compressor from dirt
An unloading system opens if the filter is restarted.
Suitable for use with all hard solder.
Maximum corrosion resistance.
Full flow design for low pressure fall.

Flow capacities in sub-line as per ARI 730-2001 standard.
TE = -4,4ºC , Tc = 32ºC, ΔP = 0.07 bar
max nominal pressure 27.8 Bar

Sight Glass - Flare x flare

Sight Glass - Flare x flare

Art. no.: 7009500

Max nominal pressure 45 Bar

Sight Glass - Solder x solder

Sight Glass - Solder x solder

Art. no.: 7009620

Max nominal pressure 45 Bar

Sight Glass - Flare int. x Flare ext.

Sight Glass - Flare int. x Flare ext.

Art. no.: 7009800

Max nominal pressure 45 Bar

Sight Glass - Flare nut x flare

Sight Glass - Flare nut x flare

Art. no.: 7009890

Max nominal pressure 45 Bar

Silencer

Art. no.: 6828461

For internal soldering.
permitted working pressure 0 - 31 Bar

Stand

Art. no.: 5136360

Other

Art. no.: 6910702

Spare parts for refrigerant container.

Oil separator OSH

Oil separator OSH

Art. no.: 7170600

Capacity in kW at +40°C in condensation
Evaporation temperature
R134a -10°C
R404A -40°C

Liquid separator

Liquid separator

Art. no.: 7170620

Capacity (min - max)R134a -10°C and R404A -40°C
PS 20.7 bar (-10°C to +65°C)
PS 15.5 bar (-45°C to -10°C)

Oil Level Regulator TraxOil with alarm function

Oil Level Regulator TraxOil with alarm function

Art. no.: 41001801

The Traxoil oil level regulator from Alco measures the oil level with a Hall sensor and watches that the correct amount of oil is in the oil pan. The oil level regulator has a viewing glass with different colour zones that show the oil level. If the oil is in the red one this means that there is too little oil and the oil level regular sounds the alarm. It also has a function whereby it is able to shut down the compressor which then automatically resumes working if the oil level rise again. Maintaining a correct oil level is vital for compressor lifetime.
24 V AC, 50/60 Hz, incl. coil and adapter, excl. Hirschmann rod IP65.
PS 46 bar.

Hirschmannstick

Hirschmannstick

Art. no.: 41001827

For Traxoil oil level regulator

Coil

Art. no.: 71186612

For Traxoil oil level regulator

Oil Filter

Art. no.: 6828491

Used to protect oil regulators by removing alien particles.
permitted working pressure, 0-45 bar.

Wall Brackets TSE of powder-coated hot-dip galvanized Sheet Steel

Wall Brackets TSE of powder-coated hot-dip galvanized Sheet Steel

Art. no.: 7068320

Wall consoles TSE made of powder-coated hot-galvanised steel sheet metal

Condensation drain hose, 50m

Condensation drain hose, 50m

Art. no.: 7069136

Condensation drain hose, 50m

Condensation drain hose UV-resistant, 50m

Condensation drain hose UV-resistant, 50m

Art. no.: 7069137

Condensation drain hose UV-resistant, 50m, 20mm

Condensation Water Pump VCC-20S Little Giant

Condensation Water Pump VCC-20S Little Giant

Art. no.: 7069130

Condensation water pump VCC-20S Little Giant with built-in tank of 1.15l Flow 2.2l / min

Condensation Water Pump VCMA Little Giant

Condensation Water Pump VCMA Little Giant

Art. no.: 7069131

Condensate pump Little Giant VCMA

VCL Condensate Water Pump Little Giant

VCL Condensate Water Pump Little Giant

Art. no.: 7069160

Condensation water pump VCL-24S

Condensate water pump Easy Flow Tecnosystemi

Condensate water pump Easy Flow Tecnosystemi

Art. no.: 7069150

condensate water pump Easy Flow
Max. suction height 2 m between floater housing and pump. Detachable elin coupling plinth.
Including 1 m coupling hose 4 x 6 mm, bracket as well as 2 bits self-adhesive double-sided tape for installation.

Current 230V AC 50/60Hz, protection class IPX4 / alarm contact wireless / normally open - closed max 16A.
Carburettor part W=67 mm D=32 mm H=38 mm

Canopy for Outdoor Part

Canopy for Outdoor Part

Art. no.: 7818338

Screen roof of outdoor unit manufactured in ABS+PMMA, light-weght and durable material. Supplied with attachments.

Microfilter VP

Art. no.: 7143682

Microfilter for air-air heat pumps and universal air conditioners.
1 package = 1 pair of filters
Dimensions L=290mm W=50mm D=5mm

Heat Pump Protection Aluminum

Heat Pump Protection Aluminum

Art. no.: 7133029

Heat pump protection in aluminium for outdoor unit.

Burn-outfilter - Flare

Burn-outfilter - Flare

Art. no.: 7012020

Catch-All Burnout filter cleans out the refrigerant system, ridding it of moisture, metal chippings, dirt, and acids. It can be mounted in both the suction and fluid lines. t Burn-out filter contains a special mixture of molecular sieve, activated aluminium, and activated carbon together with a very effective filter.
The flow capacity in the fluid line is in accordance with the ARI 710-86 standard.
TE = -15ºC, Tc = 30ºC, ΔP = 0.07 bar
Max nominal pressure 44.8 Bar

Drying Filter DMT for Transcritical CO2

Drying Filter DMT for Transcritical CO2

Art. no.: 023Z8409

Max operating pressure 140 bar.
Contains a solid core of 100% molecular sieve for maximum moisture absorption.
Connections in copper-plated steel. Power is given according to ARI710-86 at vaporisation temp. of -15°C, cond. temp. +30°C and Δp=0.07 bar.

Vertical refrigerant Reservoir ALSRV

Vertical refrigerant Reservoir ALSRV

Art. no.: 6910200

ALSRV is a cooling agent reservoir for vertical installation from OCS, which in addition to the usual cooling agents, can be used in cooling agent systems with R410a since these withstand a max. working pressure of 45 bar and are hydrostatically tested at 67.5 bar. Supplied with exclusive rotary lid valves and safety valve. Note that ALSRV 1.0 to ALSRV 2.5 are equipped with solder connections
From size 12 l to 24 L, there is one 1/2" connection for a level alarm. If no level alarm is installed, a 1" connection must be with Article No. 7060560

TraxOil Adapts to Oil Level Regulator

TraxOil Adapts to Oil Level Regulator

Art. no.: 41001819

Adapters to TraxOil oil level regulators that fit different compressors.

TraxOil Adapts to Oil Level Regulator

Fan Motors Q

Art. no.: 5136302

All motors have 3x permanent orifices in both the front and rear bearing shields as well as two screws on each side for mounting the foot, in two different C-C measurements of 18mm and 26mm. Fits universal stand. Capable of 30000 hours of continuous operation. Delivered with nuts,washers, screws and a 1m cable. Insulation classes B. CE, VDE, UL and CCC approved.

Energy Efficient Fan Motors eQ1

Energy Efficient Fan Motors eQ1

Art. no.: 5136314

Henry’s eQ1 fan motors save up to 75% on energy consumption when used as replacement for AC fan motors. Fan motors have 3x permanent orifices in the rear bearing shield and 2 screws on each side for front installation. They have different C-C measurements: 18mm and 26mm. Fits universal stand.
The two sizes of eQ1 fan motors replace nine sizes of AC fan motors. EQ1-12 replaces 2,5,7,10,12 and 16W AC-fan motors. EQ1-20 replaces 18,20,25 and 34W AC-fan motors. Capable of 50000 hours of continuous operation. Maintenance-free ball bearings guarantee long life. . Delivered with nuts,washers, screws and a 1m cable. Insulation classes B. CE, VDE, UL and CCC approved.

Fan blade

Art. no.: 5136320

Axial fan wheel that fits both Q and IQ motors.

Showing 52 of 73