Order lines: 0

Ahlsell Products Construction range Concrete supplement Moulded components Moulded sockets

Moulded sockets

Products (17)

DOWEL SLEEVE

Art. no.: 551160

Plastic spike sleeve that attaches to side of mould to form a recess for guide spike in finished concrete structures. The sleeve has internal ‘barbs’ that grab the guide spike as it is put in place. Suitable for smooth steel guide spikes or threaded rods.

COMBISAFE SLEEVE

COMBISAFE SLEEVE

Art. no.: 551937

Round plastic sleeve that is pressed down into the concrete and positioned at the desired cast height. Used for centering studs or guard rails.

Fixing Socket LMPL FIXX

Fixing Socket LMPL FIXX

Art. no.: 765630

CASTING ANCHOR w. FOT

CASTING ANCHOR w. FOT

Art. no.: 550245

Moulded sockets for attachment of e.g. a hoist, brace, or guide studs in prefab concrete structures. It consists of a nut made of cold-cast, seamless, precision steel tubing which after galvanising is pressed firmly under very high pressure around a reinforcement bar. Version: Zinc-plated, hot-dip galvanised, stainless and acid-proof.

CASTING ANCHOR w. FOT

SEALING PLUG SFL

SEALING PLUG SFL

Art. no.: 551423

Plastic plug PLP

Plastic plug PLP

Art. no.: 550221

CASTING ANCHOR w. plate

CASTING ANCHOR w. plate

Art. no.: 550286

LMPL moulded socket is used as an attachment, for example for lifting or securing into thin precast concrete structures. Made of a threaded long nut that is provided with a flat steel welded to the bottom. This flat steel makes up the anchoring of this moulded socket. Version: Untreated, zinc-plated, hot-dip galvanised.

CASTING ANCHOR w. plate

CASTING ANCHOR w. plate

CASTING ANCHOR w. plate

CASTING ANCHOR w. rebar

CASTING ANCHOR w. rebar

Art. no.: 550138

LMKS moulded socket is a well-tested attachment for lifting in prefabricated concrete structures, consisting of a threaded long nut with welded reinforcement bars. This moulded socket spreads the load very evenly through its design, even in thin concrete structures. Design: untreated, electro-zinc-plated, hot-dip galvanised, stainless acid-proof.

CASTING ANCHOR w. rebar

CASTING ANCHOR w. rebar

cast-in guardrail mount

cast-in guardrail mount

Art. no.: 551143

Installed as temporary safety guard holder during the construction period.

FIXING SOCKET H

FIXING SOCKET H

Art. no.: 5502961

Securing for lighter loads. The pipe sleeves are designed to be used in the manufacture of concrete structures where some form of threaded securing is required. Because of a hole in the pipe sleeve, the reinforcement bar can be fitted as an extra securing, which means that the load will be distributed over a greater area and the capacity will be greater. The pipe sleeves are made from cold-drawn precision steel pipes and are available in zinc-plated and stainless steel acid-proof versions. This type of pipe sleeve is sometimes referred to as a Blade sleeve. The pipe sleeves must not be used for lifting.

FIXING SOCKET B

FIXING SOCKET B

Art. no.: 550292

Securing for lighter loads. The pipe sleeves are designed to be used in the manufacture of concrete structures where some form of threaded securing is required. The pipe sleeves are made from cold-drawn precision steel pipes and are available in zinc-plated and stainless steel acid-proof versions. This type of pipe sleeve is sometimes referred to as dovetail. The pipe sleeves must not be used for lifting.

FIXING SOCKET B

Art. no.: 70714980

Lifting Anchor HEX-S A4

Lifting Anchor HEX-S A4

Art. no.: 552252

Lifting Anchor HEX A4

Lifting Anchor HEX A4

Art. no.: 552259

Casting socket LMKS FIXX

Casting socket LMKS FIXX

Art. no.: 765622

Fixing Socket B FIXX

Fixing Socket B FIXX

Art. no.: 765638

Fixing socket H FIXX

Fixing socket H FIXX

Art. no.: 765646

Showing 17 of 17