Order lines: 0

Ahlsell Products Construction range Concrete supplement Moulded components

Moulded components

Moulded sockets

Anchor and mounting rails

Fixing plates, cast forged

Casings, stud recess

Products (41)

DOWEL SLEEVE

Art. no.: 551160

Plastic spike sleeve that attaches to side of mould to form a recess for guide spike in finished concrete structures. The sleeve has internal ‘barbs’ that grab the guide spike as it is put in place. Suitable for smooth steel guide spikes or threaded rods.

COMBISAFE SLEEVE

COMBISAFE SLEEVE

Art. no.: 551937

Round plastic sleeve that is pressed down into the concrete and positioned at the desired cast height. Used for centering studs or guard rails.

Fastening plate SBKL, PAINTED C1

Fastening plate SBKL, PAINTED C1

Art. no.: 664487

SBKL mounting plate is a steel part in standard versions designed to be cast into concrete structures. The mounting plates transfer the loads they are exposed to the surrounding concrete structure through their anchors. Can also be delivered on special order as hot-dip galvanized.

Fixing Socket LMPL FIXX

Fixing Socket LMPL FIXX

Art. no.: 765630

Art. no.: 551382

CASTING ANCHOR w. FOT

CASTING ANCHOR w. FOT

Art. no.: 550245

Moulded sockets for attachment of e.g. a hoist, brace, or guide studs in prefab concrete structures. It consists of a nut made of cold-cast, seamless, precision steel tubing which after galvanising is pressed firmly under very high pressure around a reinforcement bar. Version: Zinc-plated, hot-dip galvanised, stainless and acid-proof.

CASTING ANCHOR w. FOT

Fastening plate SBKLR, stainless steel

Fastening plate SBKLR, stainless steel

Art. no.: 551366

Plastic pipe round

Plastic pipe round

Art. no.: 551061

Plastic tubes for use as recesses in the manufacture of concrete structures. Made with quite generous material thicknesses to tolerate concrete pressure during casting. Supplied in lengths of 3 metres.

Fastening plate FPL

Fastening plate FPL

Art. no.: 551386

Fastening plate FPL

Clip angle for checker plate

Clip angle for checker plate

Art. no.: 551155

Clip angle for checker plate is a hot-rolled profile with a welded on embedding ties and are as standard hot-dip galvanized.

Clip angle for checker plate

Foundation Bolts SUJ/L

Foundation Bolts SUJ/L

Art. no.: 550367

SUJ/L is a short ground bolt with anchoring plate that is placed in a concrete mould before it hardens. They convey forces from structural elements that act on them in the direction of the ground bolt to the column or ground base.

Foundation Bolts SUJ/L

Foundation Bolts SUJ/P

Foundation Bolts SUJ/P

Art. no.: 550377

SUJ/P is a long ground bolt that is placed in a concrete. They convey forces from structural elements that act on them in the direction of the ground bolt to the column or ground base.

Foundation Bolts SUJ/P

SEALING PLUG SFL

SEALING PLUG SFL

Art. no.: 551423

Plastic plug PLP

Plastic plug PLP

Art. no.: 550221

CASTING ANCHOR w. plate

CASTING ANCHOR w. plate

Art. no.: 550286

LMPL moulded socket is used as an attachment, for example for lifting or securing into thin precast concrete structures. Made of a threaded long nut that is provided with a flat steel welded to the bottom. This flat steel makes up the anchoring of this moulded socket. Version: Untreated, zinc-plated, hot-dip galvanised.

CASTING ANCHOR w. plate

CASTING ANCHOR w. plate

CASTING ANCHOR w. plate

CASTING ANCHOR w. rebar

CASTING ANCHOR w. rebar

Art. no.: 550138

LMKS moulded socket is a well-tested attachment for lifting in prefabricated concrete structures, consisting of a threaded long nut with welded reinforcement bars. This moulded socket spreads the load very evenly through its design, even in thin concrete structures. Design: untreated, electro-zinc-plated, hot-dip galvanised, stainless acid-proof.

CASTING ANCHOR w. rebar

CASTING ANCHOR w. rebar

U-sinus hairpin, A2 stainless

U-sinus hairpin, A2 stainless

Art. no.: 551238

The hairpin is used to hold concrete slabs as sandwich elements, but can also be used as attachment for the L tie rod during subsequent moulding. Made of stainless steel and stainless steel, acid-proof wire.

Fastening plate KL, PAINTED C1

Fastening plate KL, PAINTED C1

Art. no.: 551370

KL mounting plate is a steel part in standard versions designed to be cast into concrete structures. The mounting plates transfer the loads they are exposed to the surrounding concrete structure through their anchors. Can also be delivered on special order as hot-dip galvanized.

Fastening plate JKL (SJL), PAINTED C1

Fastening plate JKL (SJL), PAINTED C1

Art. no.: 551357

The rough mounting plates are steel parts in standard versions designed to be cast into concrete structures. They transfer the large loads they are exposed to the surrounding concrete structures through their anchors. Can also be delivered on special order for example as acid-proof steel or hot-dip galvanized.

STUD RECESS EXTENSION

STUD RECESS EXTENSION

Art. no.: 551321

The stud recess provides a space for the lead stud can be used for installation of prefabricated concrete elements on the construction site.

Stud recess former AR-FLEX

Stud recess former AR-FLEX

Art. no.: 551277

for use as recesses in producing products made of concrete. Flex tubing is bendable. Made of galvanised sheet metal. Other lengths and dimensions must be specially ordered.

Plastic pipes rectangular

Plastic pipes rectangular

Art. no.: 551065

Plastic tubes for use as recesses in the manufacture of concrete structures. Made with quite generous material thicknesses to tolerate concrete pressure during casting. Supplied in lengths of 3 metres.

Edge Protection L-Steel KTU

Edge Protection L-Steel KTU

Art. no.: 551397

The edge iron is an effective and attractive edge ferule for casting. When concrete slabs are cast for garages or similar items, the slabs edges in all port orifices are reinforced with an edge iron. the edge iron is effectively a wear-resistant threshold with a long lfe. The rounded edge also provides soft passage when a vehicle passes. The edge plate is also used for columns and loading platforms, etc.

WALL SHOE H

Art. no.: 550400

Wall shoe with bottom plate made of S355J2G3 with anchors of reinforcement bar. Used as a tensile bond in stiffened walls.

cast-in guardrail mount

cast-in guardrail mount

Art. no.: 551143

Installed as temporary safety guard holder during the construction period.

FIXING SOCKET H

FIXING SOCKET H

Art. no.: 5502961

Securing for lighter loads. The pipe sleeves are designed to be used in the manufacture of concrete structures where some form of threaded securing is required. Because of a hole in the pipe sleeve, the reinforcement bar can be fitted as an extra securing, which means that the load will be distributed over a greater area and the capacity will be greater. The pipe sleeves are made from cold-drawn precision steel pipes and are available in zinc-plated and stainless steel acid-proof versions. This type of pipe sleeve is sometimes referred to as a Blade sleeve. The pipe sleeves must not be used for lifting.

FIXING SOCKET B

FIXING SOCKET B

Art. no.: 550292

Securing for lighter loads. The pipe sleeves are designed to be used in the manufacture of concrete structures where some form of threaded securing is required. The pipe sleeves are made from cold-drawn precision steel pipes and are available in zinc-plated and stainless steel acid-proof versions. This type of pipe sleeve is sometimes referred to as dovetail. The pipe sleeves must not be used for lifting.

FIXING SOCKET B

MAGNET FOR STUD RECESS

MAGNET FOR STUD RECESS

Art. no.: 551092

LID, STUD RECESS 45 DEGREES

LID, STUD RECESS 45 DEGREES

Art. no.: 551322

LID, STUD RECESS 45 DEGREES

STUD RECESS EXTENSION

STUD RECESS EXTENSION

Art. no.: 551323

STUD RECESS EXTENSION

Closure plug

Art. no.: 551422

L-PROFILED STEEL

L-PROFILED STEEL

Art. no.: 661460

Hairpin U-sinus, stainless acid-resistant A4

Hairpin U-sinus, stainless acid-resistant A4

Art. no.: 551215

Casting List Gripcon

Casting List Gripcon

Art. no.: 51677366

Art. no.: 660970

Art. no.: 70714980

Lifting Anchor HEX-S A4

Lifting Anchor HEX-S A4

Art. no.: 552252

Lifting Anchor HEX A4

Lifting Anchor HEX A4

Art. no.: 552259

Casting socket LMKS FIXX

Casting socket LMKS FIXX

Art. no.: 765622

Fixing Socket B FIXX

Fixing Socket B FIXX

Art. no.: 765638

Fixing socket H FIXX

Fixing socket H FIXX

Art. no.: 765646

Showing 41 of 41