Feedback
AhlsellProductsElectricLighting 70-8377 Exterior luminairesObstacle lights and accessoriesObstacle lights

Toleka
Obstacle light LIOLB type B
Low Intensity Type-B LED IR
Article number: Suppl. article no:
7770576
LIOLB-P1/23SRX4
to see price and stock
TOLEKA's Low Intensity Obstacle Light Type B, LIOLB-P1/SRX3, with both visible and infrared LEDs allows the light to be clear and visible to everyone, even pilots using night vision equipment (NVD). The LIOLB-P1/SRX3 is equipped with a internal monitoring The infrared LED technology gives pilots with NVD complete visibility of structures without causing an uncomfortable effect.
The text below is from the Swedish Transport Agency's website regarding IR requirements in TSFS 2020:88:
"Section 29 If LED technology is used for solutions for flight obstacle lighting, the lighting device must, in addition to visible light, also emit IR light (infrared light) within a wavelength range that is visible to pilots using night vision equipment (NVD).
The IR light must shine continuously if the visible obstacle light shines with a steady light. Otherwise, the IR light must flash at the same frequency as the visible flight obstacle light.
The IR light must have the following effect in relation to the vertical angle:
1. Low Intensity Air Obstacle Light:
a) Pmin 3 mW/sr, >+5° – ≤+90°
b) Pmin 25 mW/sr, >0° – ≤+5°
c) Pmax 60 mW/sr, -90° – +90°”
TSFS 2020:88 entered into force on 1 January 2021.
"Items that have been set up before this constitution comes into force and that have been marked in accordance with older regulations or special decisions from the Swedish Transport Agency or its predecessors, may be marked according to older regulations or decisions until December 31, 2025. If an older marking no longer fulfills its function and needs to be replaced, this constitution shall be applied.
The text below is from the Swedish Transport Agency's website regarding IR requirements in TSFS 2020:88:
"Section 29 If LED technology is used for solutions for flight obstacle lighting, the lighting device must, in addition to visible light, also emit IR light (infrared light) within a wavelength range that is visible to pilots using night vision equipment (NVD).
The IR light must shine continuously if the visible obstacle light shines with a steady light. Otherwise, the IR light must flash at the same frequency as the visible flight obstacle light.
The IR light must have the following effect in relation to the vertical angle:
1. Low Intensity Air Obstacle Light:
a) Pmin 3 mW/sr, >+5° – ≤+90°
b) Pmin 25 mW/sr, >0° – ≤+5°
c) Pmax 60 mW/sr, -90° – +90°”
TSFS 2020:88 entered into force on 1 January 2021.
"Items that have been set up before this constitution comes into force and that have been marked in accordance with older regulations or special decisions from the Swedish Transport Agency or its predecessors, may be marked according to older regulations or decisions until December 31, 2025. If an older marking no longer fulfills its function and needs to be replaced, this constitution shall be applied.
- Article number: 7770576
- Suppl. article no: LIOLB-P1/23SRX4
- Material class QT1880
- This is an alternative to item 7770171
Technical data
- Type: LIOLB-P1/23SRX4
- Colour of lamp hood: Colourless
- Nominal voltage: 110-230 V
- Voltage type: AC
- Power: 6 W
- Degree of protection (IP): IP66
- Housing material: Plastic
- Lamp type: LED not exchangeable
- Mounting method: Other
- Function blinking light: No
- Function continuous light: Yes
- Function flashing light: No
- Approved according to ICAO: Yes
- Ambient temperature: -30-55 °C
- Lamp holder: Other
- Housing colour: Other
- Number of modes: 1
- Width: 165 mm
- Height: 200 mm
- Dimmable: No
- Function pulsating light: No
- Function rotating light: No
- Luminous intensity: 32.5 cd
- With infrared: Yes
- Beam angle horizontal: 360 °
- REACH Date: 2025-02-03
- REACH Information obligation: No