Feedback
The cable is intended for fixed installation both indoors and outdoors in all types of spaces where there are requirements for function during and after a fire in, for example, emergency lighting, fire alarm systems and control systems. The cable can also be laid directly in the ground. Alsecure Plus is a halogen-free, flame-retardant power cable with round or sector-shaped, few-stranded, annealed copper conductors. The cable is insulated with Mica tape + colored PEX and a screen of copper wires with counter-helix. The cable is constructed according to SS 424 14 18. The conductors have a wire count and resistance according to IEC 60228 class 2. The parts are color-coded according to SS 424 17 20. The sheath is marked with type/manufacturer/year+month/meter marking, color orange. Alsecure Plus meets fire spread class IEC 60332-3 category C (F4C) and does not emit any corrosive gases in the event of a fire and has little smoke development. The cable is approved by SEMKO. LifemarkTM recycling marking: Permanent marking on the cable's outer sheath. The marking specifies the plastic grades used and prepares the cable for recycling.
- Article number: 0055450
- Suppl. article no: 35123980900
- Ean no: 7330000073050
- Material class QA0100
Technical data
- Cable type: Alsecure Plus
- Dimension conductor x area: 4x6/6 mm²
- Outer diameter approximate: 18 mm
- Reaction-to-fire according to EN 13501-6: Class: None
- Colour outer sheath: Orange
- Weight: 537 kg/km
- Weight/100 m: 55 kg
- Nominal voltage U: 1 kV
- Nominal voltage U0: 0.6 kV
- Conductor category: Class 2 = stranded
- Conductor material: Copper
- Halogen free according to EN IEC 60754-2: Yes
- Reaction-to-fire according to EN 13501-6: Smoke production: None
- Reaction-to-fire according to EN 13501-6: Flaming droplets/particles: None
- Reaction-to-fire according to EN 13501-6: Acidity: None
- Shape of conductor: Round
- Screen: Yes
- Drain wire: No
- Lead sheath: No
- Permitted cable outer temperature after assembling without vibration: -40-70 °C
- Permitted cable outer temperature during assembling/handling: -10-50 °C
- Concentric conductor: Copper
- Material outer sheath: Polyolefin
- Nominal cross section concentric conductor: 6 mm²
- Core identification: Colour
- With protective conductor: Yes
- Material core insulation: Other
- Max. permitted conductor temperature: 90 °C
- Fibre optic elements: No
- Inner semi-conducting layer: No
- Laminated sheath: No
- Conductive coating: No
- Conductor surface: Bare
- Longitudinal water blocking screen: No
- Longitudinal water blocking conductors: No
- Low smoke according to EN IEC 61034-2: Yes
- Outer semi-conducting layer: No
- Certified for shipboard application: No
- Certified as airport lighting cable: No
- Cable geometry: Round
- Min. permitted bending radius, stationary application/permanent installation: 144 mm
- Core identification according to HD 308 S2: Yes
- Conductor resistance at 20 °C: 3.08 Ohm/km
- Specification core insulation: Crosslinked polyethylene (XLPE)
- Circuit integrity: E90
- Number of cores: 5
- Nominal cross section conductor: 6 mm²
- REACH Date: 2021-06-14
- REACH Information obligation: No
