Multifunction relay DIN-assembly ESR12NP 16A

For rail mounting in accordance with DIN-EN 60715 TH35. With modern hybrid technology that combines the best aspects of wear-free electronic control and high-performance special relays. With multi-voltage 8 for 230V AC/DC. Extremely low noise level. Thanks to the use of bistable relay function, potential problems with coil loss effects and heat generation can be avoided, even when the relay is in operation. 2 to 120 minute switch-off delay which can be set directly in the front if the ESV function is selected. With LED indication. This flashes after 15 minutes if the button is blocked (not in ER function). Glow lamp current up to 150 mA, only on 230V- input, independent of ignition current (not in ER function). Switch-off occurs when supply voltage is cut off. The ES, ESV and ER functions can be selected directly in the front. ES = Impulse function ER = Relay function ESV = Impulse function with switch-off delay. If no new impulse comes during the countdown, the relay automatically switches when the time (can be set to up to 120 min) runs out. ESV = Switch-off warning, lamps (e.g. in stairway) start to flash approx. 30 seconds before time runs out. During this time, the time can be zeroed by pressing the button again. ESV = Constant on, the relay can be activated by holding the pushbutton for more than 1 second. They switch off automatically after 2 hours or when the button is depressed for more than 2 seconds. ESV = If both switch-off warning and constant are selected, the switch-off warning is activated before constant light is switched off.
Technical data: