Ahlsell – We make it easier to be professional
Order lines: 0
Quick order
AhlsellProductsTools & MachinesWelding and GasFiller MaterialLow-alloyedSolid wire

Solid wire

Ahlsell's range of tools and machines includes power tools, hand tools, plumbing tools, hand, torch and flashlights, measuring and marking tools, cutters, grinding and brushes, brushes, rollers, wallpaper, and painting tools, cutting tools, welding and gas, compressed air, hydraulics, pneumatics, rubber cloths and vibration damping, cleaning tools, property and office, tools and garden products. We value reliable products that last a long time. That is why you will find tools and machines of high quality in our range. Explore all our tools and machines online or in one of our stores.

Products (2)
Esab aristorod ok 13.13
ESAB
Esab aristorod ok 13.13
Art. no.: 253210
OK AristoRod 13.12 is a low alloy wire electrode for gas metal arc welding. Containing 1.0% Cr and 0.5% Mo, is intended for welding heat-resistant steel of the same type and other low-alloy, high-strength steel, as there is no impact resistance requirement. When welding SS 2216 and 2223 in greater thicknesses than 8-10 mm, the working temperature should be kept at 150-200° C to limit the risk of cracking. Welding should be followed by an anneal between 680-720°C with a holding time of approx. 30 min. after completely heated up. Low-alloyed high-strength steel (SS 2225, Weldox 500, 700) can often be welded without preheating; however, an increased working temperature is then advisable. Multiple strands are required to fill a joint. The typical mechanical value that is reported is both in the untreated state and after stress annealing (700°C/0.5h). OK AristoRod 13.12 is surface treated with ESAB’s unique ASC method - a completely new coating technique, which reaches new levels for MAG welding with regards to design and versatility, especially for robot welding and automated welding. Characteristic advantages are exceptionally good start qualities. Trouble-free feeding at high feed rates and long feeder cables, a very stable arc at high welding currents, little spray, low smoke emission, reduces wear of contact nozzle and improved protection against corrosion on the wire. Fine flushed. Shielding gas: Ar+15-25% CO² (M21) or CO² (C1). Current type DC+.
Code in accordance with: SFA/AWS A5.28 ER100S-G. EN 12534 G Mn3NiCrMo.
Showing 2 of 2