Order lines: 0

Ahlsell Products Tools & Machines Hand tools Pliers Electronics pliers

Electronics pliers

Ahlsell's range of tools and machines includes power tools, hand tools, plumbing tools, hand, torch and flashlights, measuring and marking tools, cutters, grinding and brushes, brushes, rollers, wallpaper, and painting tools, cutting tools, welding and gas, compressed air, hydraulics, pneumatics, rubber cloths and vibration damping, cleaning tools, property and office, tools and garden products. We value reliable products that last a long time. That is why you will find tools and machines of high quality in our range. Explore all our tools and machines online or in one of our stores.

Products (33)

Sidebar Ironside electronics 110 mm

Sidebar Ironside electronics 110 mm

Art. no.: 384958

With polished and protective lacquered head. Single joint. Return spring. Plastic covered grip sleeves. For copper wire with diameter 0.2-1.5 mm.

DIAGONAL CUTTING NIPPER KNIPEX 7702

DIAGONAL CUTTING NIPPER KNIPEX 7702

Art. no.: 155008

Wire strippers electronics, round head, return spring, cutter with small bevel. Grip of two-component material, cuts copper wire 1.6 mm, hard iron wire 0.6 mm.

Side knife Knipex 7861 electronics

Side knife Knipex 7861 electronics

Art. no.: 225852

Single joint. Precision shaped tips. Without phase. With suspension. With ergonomic two-component handle. Cutting capacity, copper wire 0.2-1.6 mm. 7803 for soft wire. 7861 for hard wire.

Side knife Knipex 7861 electronics

Side Cutter Wiha Electronics

Side Cutter Wiha Electronics

Art. no.: 70365752

For cutting soft wire in electronics. Wide, pointed head. C 70 tool steel.

Cable Tie Nemiq CTT 150

Cable Tie Nemiq CTT 150

Art. no.: 71616772

DIAGONAL CUTTING NIPPER KNIPEX 7912

DIAGONAL CUTTING NIPPER KNIPEX 7912

Art. no.: 355172

Handles music wires. With return spring. Jaws of ball bearing steel for long service life. With ergonomic 2-component handle. Cutting capacity 0.6 mm music wire and 1.7 mm copper wire.

DIAGONAL CUTTING NIPPER KNIPEX 7912

Diagonal cutting nipper bahco

Diagonal cutting nipper bahco

Art. no.: 119854

High alloy tool steel with black oxidized surface. Induction-tempered cutting edges. Oval head. With recoil spring and threadholder. Ergonomically designed handle made from two-component plastic material. Cutting capacity 0.3 to 1.5mm, copper wire.

Diagonal cutting nipper bahco

Diagonal cutting nipper bahco

Cutting nipper bahco 4231

Cutting nipper bahco 4231

Art. no.: 214630

High alloy tool steel with black oxidized surface. Induction-tempered cutting edges. With 20° jaw angle and recoil spring. Ergonomically designed handle made from two-component plastic material. Cutting capacity 0.3 to 1.25 mm, copper wire.

Cutting nipper bahco 4231

Assembly pliers bahco 4430

Assembly pliers bahco 4430

Art. no.: 214633W

High alloy tool steel with black oxidized surface. Induction-tempered cutting edges. With flat jaws and recoil spring. Ergonomically designed handle made from two-component plastic material.

Assembly pliers bahco 4430

Snipe nose plier bahco 4830

Snipe nose plier bahco 4830

Art. no.: 214632W

High alloy tool steel with black oxidized surface. Tips with semi-circular cross-section. Flat gripping surface. With return spring. Ergonomically designed handle made from two-component material.

Snipe nose plier bahco 4830

Snipe nose plier bahco 4833

Snipe nose plier bahco 4833

Art. no.: 214339

High alloy tool steel with black oxidized surface. Bent tips 60° with semi-circular cross-section. Flat jaws. Ergonomically designed handle made from two-component material. ISO 5745.

Snipe nose plier bahco 4833

Diagonal cutting nipper

Diagonal cutting nipper

Art. no.: 122239

High alloy tool steel with black oxidized surface. Induction-tempered cutting edges to a hardness of 63-65 HRc. With return spring. Screwed joints and parallel cutting edges. Easy-grip handle. CO-conductive. J with cut for copper thread stripping. Cutting capacity, cutting of copper wire.

Diagonal cutting nipper

Diagonal cutting nipper

SNIPE NOSE PLIER LINDSTRÖM 7890-92

SNIPE NOSE PLIER LINDSTRÖM 7890-92

Art. no.: 174307

High quality tool steel with glossy, polished surface. Induction hardened cutting edges to a hardness of 45-48 HRC. With return spring. Easy-grip handle in plastic. CO - conductive.
7890 - 32 mm flat jaws with rounded corners.
7891 - 32 mm ribbed jaws with rounded corners.
7892 - 29 mm flat jaws with rounded corners and 60° bent corner.

SNIPE NOSE PLIER LINDSTRÖM 7890-92

Diagonal cutter Lindström RX 8140-8142, RX8150-8161

Diagonal cutter Lindström RX 8140-8142, RX8150-8161

Art. no.: 220810

Precision oval head diagonal cutters developed according to the scientific ERGO™ process, Oval head
ERGO™ handles with two-component combination, thermoplastic surface, for comfortable grip, on tough polypropylene core for rigidity
Micro-bevel, flush & ultra-cut
The cutting capacity that is given is for copper wire
High performance alloyed steel
Burnished finish
Numerically controlled machine grinding guarantees edge angle accuracy & contact, increases the tool's reliability & consistency
Precision induction-hardened edges 63-65 HRC
Screw joint minimises friction & maximises alignment of cutting edges
ESD safe handles in two-component synthetic material
Bio spring limits the tension throughout the working cycle of the tool & can be adjusted to 3 different positions or removed
Ideal for wire harness work & standard printed circuit board assembly

Diagonal cutter Lindström RX 8140-8142, RX8150-8161

SNIPE NOSE PLIER LINDSTRÖM RX 7890-92

SNIPE NOSE PLIER LINDSTRÖM RX 7890-92

Art. no.: 220816

ESD design. High quality tool steel with glossy, polished surface. Double-jointed with extra-long contact surface. Induction hardened cutting edges to a hardness of 45-48 HRC. With replaceable recoil spring. Ergonomic two-component handle.
RX7890 - with 32 mm flat jaws with rounded corners. Length 158.5 mm.
RX7891 - with 32 mm ribbed jaws with rounded corners. Length 158.5 mm.
RX7892 - med 29 mm flat jaws with rounded corners and 60° bent corner. Length 155.5 mm.

SNIPE NOSE PLIER LINDSTRÖM RX 7890-92

DIAGONAL CUTTING NIPPER KNIPEX 7803

DIAGONAL CUTTING NIPPER KNIPEX 7803

Art. no.: 124645

Single joint. Precision shaped tips. Without phase. With suspension. With ergonomic two-component handle. Cutting capacity, copper wire 0.2-1.6 mm.

DIAGONAL CUTTING NIPPER KNIPEX 7803

DIAGONAL CUTTING NIPPER KNIPEX 7932/7942

DIAGONAL CUTTING NIPPER KNIPEX 7932/7942

Art. no.: 292823

Precision cutter for very fine cuts. With polished head and screwed joint. Pointed head. ESD-protected grip of 2-component material. 7932 with phase. 7942 without phase.

DIAGONAL CUTTING NIPPER KNIPEX 7932/7942

Skaltang Knipex 1301

Skaltang Knipex 1301

Art. no.: 236957

Multi pliers 160 mm. Cut, bend, strip and crimp with one tool, dipped arms.

Skaltang Knipex 1301

Pliers Wiha Z 05009 VDE

Pliers Wiha Z 05009 VDE

Art. no.: 617209

Pliers Wiha Z 05009 VDE

Sidebbit Lindström 7190, 7191

Sidebbit Lindström 7190, 7191

Art. no.: 106698

Of polished high-quality steel. Arrow style head. Grinding with numerically controlled machines guarantees accurate edge working . Induction hardened cutting edges to a hardness of 58-60 HRC. Screwed joint with minimal friction and parallel cutting edges. ESD-safe handle with return spring. Cutting capacity refers to the copper wire.

Diagonal Cutting Nipper Lindström 8143-8145, 8153, 8163-8165

Diagonal Cutting Nipper Lindström 8143-8145, 8153, 8163-8165

Art. no.: 218718

High alloy tool steel with black oxidized surface. Induction-tempered cutting edges to a hardness of 63-65 HRc. With return spring. Screwed joints and parallel cutting edges. Easy-grip handle. CO-conductive. Cutting capacity, cutting of copper wire.

Diagonal Cutting Nipper Lindström 8143-8145, 8153, 8163-8165

Round plier Lindström 7590

Round plier Lindström 7590

Art. no.: 117902

Round plier made of polished high quality steel.

Side Cutter Ironside Electronics 2-component

Side Cutter Ironside Electronics 2-component

Art. no.: 34949143

Diagonal Cutter Ironside Electronics 2-component

Diagonal Cutter Ironside Electronics 2-component

Art. no.: 34949145

Needle Nose Pliers Ironside Electronics

Needle Nose Pliers Ironside Electronics

Art. no.: 778801

Needle Nose Pliers Ironside Electronics

Flat Nose Pliers Ironside Electronics

Flat Nose Pliers Ironside Electronics

Art. no.: 778802

Flat Nose Pliers Ironside Electronics

Round Nose Pliers Ironside Electronics

Round Nose Pliers Ironside Electronics

Art. no.: 778803

Round Nose Pliers Ironside Electronics

Side cutter Lindstrom 6152

Side cutter Lindstrom 6152

Art. no.: 71124883

Side cutter Lindstrom 6152

Side Cutter Ironside Electronic

Side Cutter Ironside Electronic

Art. no.: 71665796

Diagonal cutting nipper Lindström 8148

Diagonal cutting nipper Lindström 8148

Art. no.: 174302

Flush Edge Shear Cutter 6151

Flush Edge Shear Cutter 6151

Art. no.: 74293504

Side Cutter Ironside electronic 2-comp 115mm

Side Cutter Ironside electronic 2-comp 115mm

Art. no.: 78570537

This 115 mm side cutter is manufactured from carbon steel and features a chrome plated surface that provides durability in installation and industrial environments. The TPR rubber handles offer a steady grip during extended tasks. The design includes spring return handles that reduce strain during repeated cutting operations, making the tool suitable for professional users working with assembly and electrical installation tasks. Its compact dimensions allow use in confined spaces where precision is required when cutting thin wires and small components. The construction supports controlled cutting performance and facilitates methodical work in maintenance and assembly.

Pointed pliers Ironside

Pointed pliers Ironside

Art. no.: 404533

With polished and protective lacquered head. Single joint. Return spring. Plastic covered grip sleeves.

Showing 33 of 33