Order lines: 0

Ahlsell Products Storage & Handling Scaffolding

Scaffolding

Make sure your workplace is safe and convenient when it comes to storage and handling. Ahlsell's range for your workplace helps you with storage, ladders, bends, pallets, racks, ropes and chains.

Products (16)

Extension Kit Zarges Paxtower

Extension Kit Zarges Paxtower

Art. no.: 720731

Craftsman Scaffold Zarges Paxtower

Craftsman Scaffold Zarges Paxtower

Art. no.: 716408

Craftsman Scaffold Zarges Paxtower

Staircase Wibe Ladders

Staircase Wibe Ladders

Art. no.: 374631

Stable and easy to install stairway tower with overlapping bracing for safer working at higher heights. Complete with stairways and platform every two metres, two top platforms, toeboards, adjustable wheels (200 mm) and support stabilisers. You can order a complete tower for the height you require or begin with a base pack and build up with add-on packs to the height you desire later.

Staircase Wibe Ladders

Staircase Wibe Ladders

Scaffolding Wibe Ladders WRT-750

Scaffolding Wibe Ladders WRT-750

Art. no.: 374617

Small scaffold tower with overlapping bracing. Choose between complete towers with platforms and sloping ladders, toeboards, adjustable wheels and stabilisers or to begin with the basic pack and build up with add-on packs. (The illustration shows the basic package)

Scaffolding Wibe Ladders WRT-750

Scaffolding Wibe Ladders WRT-750

Scaffolding Wibe Ladders WRT-750

Scaffolding Wibe Ladders WRT-750

Scaffolding Wibe Ladders WRT-750

Scaffolding Wibe Ladders WRT-1400

Scaffolding Wibe Ladders WRT-1400

Art. no.: 374625

Robust, easy-to-install mobile scaffold with overlapping bracing and well-thought-out solutions. May be ordered complete with two platforms, leaning stepladder every two metres, two top platforms, toe board, adjustable wheels (200 mm), and support legs. It is also possible to begin with a basic package, and use extension packages later to reach the desired height. (The illustration shows the basic package)

Scaffolding Wibe Ladders WRT-1400

Scaffolding Wibe Ladders WRT-1400

Scaffolding Wibe Ladders WRT-1400

Scaffolding Wibe Ladders WRT-1400

Scaffolding Wibe Ladders WRT-1400

Craftsmanship Wibe Ladders FT 750

Craftsmanship Wibe Ladders FT 750

Art. no.: 374640

With collapsible base section for easy handling and transport. Overlapping bracing for extra safety and stability. Complete with platform and leaning stepladder every two metres up to the top. Lockable wheels (125mm). Toe board and support legs. (The image shows a complete craftsman scaffolding, article no. 374644.)

Craftsmanship Wibe Ladders FT 750

Craftsmanship Wibe Ladders FT 750

Craftsmanship Wibe Ladders FT 750

Craftsmanship Wibe Ladders FT 750XR

Craftsmanship Wibe Ladders FT 750XR

Art. no.: 418372

Scaffolding, with collapsible base section for easy handling and transport. Overlapping bracing for extra safety and stability. Complete with platform and leaning stepladder every two metres up to the top. Lockable wheels (125 mm), kick boards, and support legs. Extra safe mounting thanks to overlapping rigging and extra platform every two meters. Soft profiles, lock-claws with ergonomic two-finger grips, and colour-coded parts for easier transportation, handling, and assembly. Stable work surface (1.7x0.6m) with kick boards on the top platform. Can easily be built to the desired height with the extension kit. Complies with new requirements according to AFS 2013: 4

Craftsmanship Wibe Ladders FT 750XR

Craftsmanship Wibe Ladders FT 750XR

Craftsman Scaffold W.steps HS 680

Craftsman Scaffold W.steps HS 680

Art. no.: 36241068

An aluminum scaffold for work at slightly lower heights. It can be used indoors and on firm, smooth ground outdoors. The A-package, which consists only of a foldable frame, wheels (125 mm), and a platform, is very quick to assemble and is perfect for tasks such as working on ceilings or lower facades, and can be transported in a regular car. If you combine the A- and R-packages, you get a secure scaffold with both guardrails and support legs (platform height 1.4 m and total height 2.4 m). You can also extend the A-package with the B- and C-packages for platform heights up to 2.4 and 4.2 meters. The C-pack-XR meets the requirements of AFS 2013:4 and therefore comes with ladders for safer and more comfortable climbing.

Craftsman Scaffold W.steps HS 680

Paint Stand PELA for Hood

Paint Stand PELA for Hood

Art. no.: 36413916

Foam-covered scissor stand for hoods, etc. Width: 1070 mm. Working height: 465-970 mm. Working height locking with chain.

Paint Stand PELA for Hood

Paint Stand PELA for Bumpers

Paint Stand PELA for Bumpers

Art. no.: 36413970

Paint stand with adjustable arms suitable for bumpers. Continuous adjustment of arm length and angle with screw locking. The stand is also adjustable in height and width by locking the axle with a chain, 570-1170 mm. The length of the arms is 790 mm. The stand can also be folded for easier storage.

Paint Stand PELA for Bumpers

Paint Stand PELA for Doors & Bumpers

Paint Stand PELA for Doors & Bumpers

Art. no.: 36413968

Paint stand with foam-covered holders for doors and bumpers. Height adjustable. Equipped with four wheels and a handle for easy mobility. Two of the wheels are lockable. Size (LxWxH): 1180x1475x2140 mm including wheels.

Paint Stand PELA for Doors & Bumpers

Paint Stand PELA Rotatable 360°

Paint Stand PELA Rotatable 360°

Art. no.: 36413923

Rotatable versatile paint stand with 6 individually infinitely adjustable arms. 360-degree rotation locking via spring-loaded foot pedal. The stand is also equipped with a holder for a paint spray gun, 2 wheels, and a handle for easy movement of the stand. Rib height and length: 940x1800 mm. Arm length: 2x400 mm, 4x750 mm.

Paint Stand PELA Universal

Paint Stand PELA Universal

Art. no.: 36413921

Paint stand with stepless adjustment of height, width, centering, and angle. Working height 1010-1360 mm.

Paint Stand PELA Universal

Work Platform PELA with Suction Cups

Work Platform PELA with Suction Cups

Art. no.: 36413919

Foam-covered sawhorse with suction cups for securing parts during tasks such as grinding. The sawhorse can also be used without suction cups. Width: 1070 mm. Working height: 640-940 mm. Working height is locked with chains.

Work Platform PELA with Suction Cups

Frame W.steps for scaffolding

Frame W.steps for scaffolding

Art. no.: 817015

Frame for W.steps scaffolding. Spare part for scaffolding ST 1400, RT 1400, RT 750, FT 750.

Frame W.steps for scaffolding

Frame W.steps for scaffolding

Frame W.steps for scaffolding

Paint Stand PELA for Wheels

Paint Stand PELA for Wheels

Art. no.: 36413982

Paint stand with 4 adjustable arms with conical tops for hanging rims. The paint stand is equipped with 4 wheels, 2 of which are lockable, and a handle for moving. Total size: 950x1130.5x1260 mm.

Showing 16 of 16