Order lines: 0

Ahlsell Products Consumables Chemical technology and hygiene Oil - grease - cutting fluidsTapping and cutting fluids

Tapping and cutting fluids

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Products (29)

Thread oil ridgid

Thread oil ridgid

Art. no.: 120669V

Mineral-based oil. Protects threading dies and thread sections. Fast lubrication and cooling. Suitable for threading of steel and stainless steel. Contains sulphur but is free from chlorine and silicon.

Thread oil ridgid

Thread oil rems spezial

Thread oil rems spezial

Art. no.: 2585210

High-alloyed thread liquid based on mineral oil. Rinsable.

Thread oil rems spezial

Molykote thread dressing paste 1000

Molykote thread dressing paste 1000

Art. no.: 270077

Molykote thread dressing paste 1000

Cutting fluid hysol 3505

Cutting fluid hysol 3505

Art. no.: 563836

The cutting liquid Hysol 3505 E is a mineral oil based microemulsion with very good technical characteristics. It is intended for light to medium metal working. Can be mixed with water. Hazard labelling: irritant.

Cutting fluid hysol 3505

Thread oil tilia

Thread oil tilia

Art. no.: 2590005

Thread oil that is completely biodegradable, for threading, drilling and punching in all materials, such as stainless steel acid-resistant, aluminium, steel and others. The thread oil gives minimal friction resistance, less wear on tools, better threads and a higher surface finish. Has an extremely high lubricating and cooling effect.

Thread oil tilia

Cutting paste rocol rtd

Cutting paste rocol rtd

Art. no.: 174907

Based on vegetable oil. Used for threading, reaming, drilling and turning in metals such as stainless steel and nimonic.

Thread paste tilia

Thread paste tilia

Art. no.: 2590100

The thread paste is used when threading, grooving, drilling and more. Particularly suitable when working hard and tough alloys such as stainless steel, acid-resistant and aluminium. Excellent cooling and lubricating properties. Vegetable-based.

Thread paste tilia

Cutting fluid carecut s 600

Cutting fluid carecut s 600

Art. no.: 563834

The cutting liquid CareCut S 600 is a high performing metalworking fluid, free from chlorine and mineral oil. Can be mixed with water. It is based on a unique additive package and works in synergy to increase performance of machines and surface finish of the material. The additive package gives a good product stability, increases biological stability and reduces operation costs. Intended for large central systems and single machines, i.e. processing of aluminium and steel. Hazard labelling: irritant.

Cutting fluid carecut s 600

Cutting oil tilia cyt spray

Cutting oil tilia cyt spray

Art. no.: 2590200

Natural product of vegetable oils. For all cutting processes in most materials and suitable for tough materials that are aluminium/stainless steel and acid-resistant. Cutting oil is rust-protective.

Cutting oil tilia cyt spray

Cutting oil rocol rtd

Cutting oil rocol rtd

Art. no.: 230630

Contains EP additives. Red. Free from chlorine and mineral oil. Easily washed off. Used for threading, reaming, drilling and turning.
Rocol RTD spray - Flammable.

Cutting oil rocol rtd

Cutting oil rocol rtd

Cutting oil rocol rtd

Art. no.: 174902

Dark liquid with high viscosity. Consists solely of high pressure additives. Silicon free. Does not contain mineral oil. For the most difficult reaming, threading and drilling operations..RTD Clean cut - completely synthetic. For aluminium and copper. Hazard labelling: 5 litres = Environmentally hazardous. 400 ml spray = Extremely flammable, environmentally hazardous. 300 ml spray = Extremely flammable, environmentally hazardous. 400 ml liquid = Environmentally hazardous.

Cutting oil rocol rtd

Cutting oil rocol rtd

Cutting paste tilia

Cutting paste tilia

Art. no.: 211245

The cutting paste is made from vegetable oils. Used for cutting, processing, drilling and punching in most materials. Cooling and lubricating effect which also protects against rust. Suitable for tough materials such as aluminium/stainless steel.

Cutting paste rocol rtd

Cutting paste rocol rtd

Art. no.: 174904

For threading and reaming of heart allies in steel, stainless steel and nickel. Low melting point. Good adhesion capabilities. Hazard labelling: Environmentally hazardous.

Cutting paste rocol rtd

Cutting fluid rocol ultracut

Cutting fluid rocol ultracut

Art. no.: 174900

Semi-synthetic cutting liquid that can be mixed with water. Contains highly refined mineral oil. The concentrate has a transparent, green fluorescent colour. Free from biocide, nitrites, chlorinated paraffin, sulphur treated esters, phenols and phosphates. Usable on most materials, even stainless steel. Just as suitable in machines with advanced production systems as in ordinary conventional machines. Hazard labelling: Irritant.

Cutting fluid rocol ultracut

Cutting fluid rocol ultracut

Art. no.: 174898

Semi-synthetic cutting and sanding liquid. The concentrate and emulsion have a transparent, green, fluorescent colour. Free from chlorine, nitrites and biocides. Suitable for many different processes on iron and non-iron materials including stainless steel and different steel alloys. Gives good performance even when significantly diluted. Hazard labelling: Irritant.

Linseed-oil boild

Linseed-oil boild

Art. no.: 4054115

Boiled linseed oil in plastic bottles.

Linseed-oil boild

Thread Lock Loctite 290

Thread Lock Loctite 290

Art. no.: 132256

Thread locking medium, medium high/high strength. Ideal for locking preassembled fasteners.

LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosity in welds, castings and powdered metal parts.

The advantages:
Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws.
Only works on metal.
Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
Requires heat for disassembly.

Thread lock 248

Thread lock 248

Art. no.: 377325

Thread locking adhesive, medium strength, positioning: MRO/Distribution

Threadlock 268

Art. no.: 377326

Thread locker Loctite® 268 stick - strong 19 grams

Linear holder Unipak

Linear holder Unipak

Art. no.: 4054120

Linen holder for 80 gram roll of linen.

THREAD LOCKING LOCTITE 2700

THREAD LOCKING LOCTITE 2700

Art. no.: 419352

Thread locking adhesive with “white" material safety sheet. Chemically and thermally stable after hardening.

THREAD LOCKING LOCTITE 2700

Cutting fluid Tilia Universal

Cutting fluid Tilia Universal

Art. no.: 237260

Cutting fluid for machine cutting of most materials. Vegetable oil-based. Excellent cooling and lubricating properties. Intended to be diluted.

Activator Loctite 7452

Activator Loctite 7452

Art. no.: 35641570

Transparent, colourless to light amber-coloured activator for LOCTITE cyanoacrylate adhesives. Can be pre- or post-applied.

LOCTITE SF 7452 is a transparent, colourless to light amber-coloured activator to increase bonding speed for LOCTITE cyanoacrylate adhesives. Can be pre- or post-applied. Particularly well suited for post-application on cyanoacrylate adhesive to ensure fast bonding. Typical applications include bonding of wires and loops to circuit boards, access protection of adjustable components, mounting of standoffs, guides and stiffening.

The advantages:
Sets excess adhesive.
Provides excellent cosmetic results without the white discolouration caused by quick adhesives.
Not recommended for plastics susceptible to stress fractures.

Activator Loctite 7452

Thread oil RTD Cleancut

Thread oil RTD Cleancut

Art. no.: 174908

RTD® IP.Board is a specially designed hand-held cutter lubricant that aims to improve day to day
machining - regardless of the metal being machined. RTD® cleancut can be used in a wide range of
non-ferrous and ferrous metals, including copper, brass and aluminum, without the risk of discoloration. Oil-free variety,
as there are problems with excessive smoke formation that are often associated with oil-based products,
it thus improves working conditions and prevents acid corrosion on the workpiece. The low viscosity of RTD®
Cleancut means that it penetrates rapidly to ensure lubrication at the cutting edge to improve both tool life
and surface finish.

Cutting Fluid Hysol Sg

Cutting Fluid Hysol Sg

Art. no.: 563838

Cutting Fluid Hysol Sg

Cutting Oil Co 800 Cuttingoil

Cutting Oil Co 800 Cuttingoil

Art. no.: 471227

Cutting Fluid CRC Supercut

Cutting Fluid CRC Supercut

Art. no.: 563916

Cutting paste Ironside

Cutting paste Ironside

Art. no.: 78470881

Cutting paste is used for all cutting processing, drilling, broaching and punching.
Can be used for most metals and is particularly suitable for tough and hard alloys such as stainless
steel, acid-resistant material and aluminium.
The product has good lubrication and cooling properties, which gives a high surface finish and reduced
tool wear.
The product has a rust-protective effect and do not release irritating vapours.

The product is made from locally produced rapeseed oil to be biodegradable, while maintaining high quality, efficiency, and gentleness in cutting operations and lubrication.

Advantages and Features:

Possesses excellent lubricating and cooling properties.
Provides a high surface finish and reduced tool wear.
The cutting paste has a rust-protective effect and does not emit irritating fumes.

Base: Rapeseed oil
Colour: Yellowish
Storage: 12 months in unopened packaging, storage temp. 0-25°C.

Cutting paste Ironside

Cutting paste Ironside

Cutting oil spray Ironside

Cutting oil spray Ironside

Art. no.: 78470884

Cutting oil spray is used for all cutting processing, drilling, broaching, threading, punching, etc.
Can be used for most metals and is particularly suitable for tough and hard alloys such as stainless
steel, acid-resistant material and aluminum.
The product has good lubricating and cooling properties, which gives a high surface finish and reduced
tool wear.
The product has a rust-protective effect.

The product is made from locally produced rapeseed oil to be biodegradable, while maintaining high quality, efficiency, and gentleness in cutting operations and lubrication.

Advantages and Features:

Possesses excellent lubricating and cooling properties.
Provides a high surface finish and reduced tool wear.
The cutting oil spray has a rust-protective effect.

Base: Rapeseed oil
Colour: Yellow
Storage: 24 months in unopened packaging, storage temp. 0-25°C.
Aerosol 400 ml.

Showing 29 of 29