Order lines: 0

Ahlsell Products Consumables Chemical technology and hygiene Oil - grease - cutting fluidsLubricating oils

Lubricating oils

Ahlsell helps you find the right product for your work. Our range of chemical and hygiene products includes, among other things, joint and sealing compounds, fireproofing, cleaning agents, glues, lubricants, cutting fluids, paint, solvents, disinfectants, and soap. Explore our wide selection here or visit your nearest Ahlsell store.

Products (94)

Cable lubricant LUB-1

Cable lubricant LUB-1

Art. no.: 1600436

Makes feeding cables and leads quicker, easier, cleaner and not least safer. 90% of cable faults are linked to damage that happens during installation. Cable greasing agent which works with the most common cable cover materials. The thick, flexible consistency doesn’t change during storage or temperature variations. The lubricant is easy to use and apply without runs or drops and isn’t harmful to the skin.

Cable lubricant LUB-1

Cable lubricant LUB-1

Master MoS2 Penetrating Oil

Master MoS2 Penetrating Oil

Art. no.: 748100

Master MoS2 Penetrating Oil is a highly refined penetrating lubricant that is well-suited for lubricating chains, steel cables, hinges, guides, plain bearings, etc. The MoS2 additives prevent metal contact even under very high surface pressure. Suitable for temperatures up to +120°C and temporary temperatures up to +400°C. Color: Brown/Black.

Green Propellant product, which means that through the mass balance principle, it is ensured that the corresponding amount of propellant in the can is produced from renewable raw materials. Compared to propellants of fossil origin, this results in a CO2 reduction from propellant production by 40-90%, depending on the gas.

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Art. no.: 3115122

SUPERGLIDEX is a lubricant with silicone and is used when installing plastic sleeve pipes. SUPERGLIDEX is snow-white and has a pleasant creamy consistency. Neutral pH value (approx. 7). Frost-proof. Provides easy and problem-free assembly of plastic sleeve pipes, rubber strips and gaskets. The content of silicone means that the pipe parts can be easily dismantled even after a long time, in addition to protecting the rubber gasket from drying out/darkening. Good adhesion in wet/moist environments. Frostproof to -10.

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Unipak Super Glidex Lubricant with silicone

Oil engine Q8 formula excel

Oil engine Q8 formula excel

Art. no.: 774460

Synthetic oil for petrol and diesel motors. Provides for easier starting in winter, and contributes to better fuel economy. Tested and approved by leading car manufacturers. Intended for year-round use from approx. -40°C and up. Fully miscible with other motor oils. Suitable as filling oil for all cars.

Universal oil wd-40

Universal oil wd-40

Art. no.: 193047

Multi-spray that penetrates and dissolves rust, lubricates, repels damp, cleans and protects against rust. Labelling: harmful to health.

Universal oil wd-40

Universal oil wd-40

Universal oil wd-40

Universal oil wd-40

Hydraulic oil Q8 Holben Bio Plus

Hydraulic oil Q8 Holben Bio Plus

Art. no.: 419147

Synthetic hydraulic oil based on unsaturated esters for year round-
use in mobile and stationary hydraulic systems. adapted
For use in sensitive environments where high biological
biodegradability is a requirement i.e. Water supplies. Contains
ashless (Zinc free) antiwear additives. Q8 Holbein Bio
Plus contains 90% renewable raw materials.
Do you want a product with lower viscosity for low temperatures
or for systems with delicate parts, We recommend that you
use Q8 Holbein Bio LT 22 or blend this product in
suitable proportions.

The advantages:
Highly Biodegradable
High viscosity index permits a wide
operational temperature range
Extraordinarily good low temperature properties
Good filterability
Good air separation qualities
Good wear protection
Protects against rust and corrosion
No destructive effect on
seal materials
Minimal foaming
Good oxidisation stability

Hydraulic oil Q8 Holben Bio Plus

Gearbox oil Q8 Goya NT 320

Gearbox oil Q8 Goya NT 320

Art. no.: 419184

bevel and worm gears oil
Q8 Goya NT is oil with EP-properties for
industrial gear units. intended for bevel and worm gears, heavy
Loaded bearings and for general machine lubrication.
Specially developed for many demanding applications
for example in windmill gears.

Gearbox oil Q8 Goya NT 320

Lubricating oil Ironside PTFE

Lubricating oil Ironside PTFE

Art. no.: 377100

Lubricant resistant to high pressure, which gives long-lasting protection against friction and wear. Used on metal, wooden surfaces and plastic. Teflon/PTFE combination. Repaintable. Silicon free. Equivalent to 462164.

Universal grease penoil

Universal grease penoil

Art. no.: 471159

Universal lubricant and rust remover with excellent penetration properties. Dissolves rust, coatings, corrosion, releases and lubricates corrosive mechanisms. NSF H1. Hazard labelling: Extremely flammable.

Engine oil Q8 Garden Pro 4T SAE 30

Engine oil Q8 Garden Pro 4T SAE 30

Art. no.: 76759057

Spray rocol

Art. no.: 181274

Dry film spray for reducing friction and for general dry lubrication. Gives a thin, even and completely covering film of molybedenum sulphide with a small content of binding agent. Intended for joined surfaces of metal and plastic. Dry lubrication of slide bearings, sliding surfaces and gears. Anti-friction treatment of thread joins. Also suitable for use at higher temperatures (up to 450° C). Hazard labelling: Extremely flammable, irritant.

Hydraulic oil hyspin aws

Hydraulic oil hyspin aws

Art. no.: 563854

Mineral oil based. Contains wear-reducing additives. ISO VG 32.46.

Hydraulic oil hyspin aws

Hydraulic oil hyspin aws

Silicone Spray Loctite LB 8021

Silicone Spray Loctite LB 8021

Art. no.: 68282261

Multilube, aerosol, 500 ml

Multilube, aerosol, 500 ml

Art. no.: 78643450

Silicone oil WD-40

Silicone oil WD-40

Art. no.: 377273

A classic silicone with WD-40 strong brand and with the superb solution Smart Straw.
Features and advantages:
- Smart Straw function
- Excellent lubrication
- Water repellent
- Friction damping
- Prevents rust and corrosion
- Temp. durability -35° C to 200° C
- Food grade NSF H2 #145374
Application areas: Belt, bearings, couplings, tools, pulleys, locks, hinges, etc.

Lubrication Oil Cejn

Lubrication Oil Cejn

Art. no.: 425057

Lubrication oil for air preparation equipment. Environmentally friendly lubrication oil with efficient lubrication properties for pneumatic tools.

Lock Spray CRC Lock De-Icer

Lock Spray CRC Lock De-Icer

Art. no.: 236939

First aid for all types of lock. Thaws and prevents freezing as well as lubricating and cleaning. 15 ml. AE. Hazard labelling: Extremely flammable.

Lock Spray CRC Lock De-Icer

Lubricant crc belt anti-slip

Lubricant crc belt anti-slip

Art. no.: 471155

Belt grip spray that preserves and increases efficiency of flat, round and V-shaped drive and transmission belts. Prevents grinding and gnashing and that drive belts cracking. Hazard labelling: Extremely flammable. NSF H1

Lubricant crc dry lube

Lubricant crc dry lube

Art. no.: 471150

Dry lubrication. Grease and oil free. For lubrication of plastic, rubber and metal. Withstands temperatures up to 250°C NSF H1. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Chain oil Q8 bizet bio68

Chain oil Q8 bizet bio68

Art. no.: 317928

Biodegradable, vegetable chain oil for chain saw chains and chain conveyors. Intended for year-round oil in the entire country. Particularly suitable for environments where high requirements on biodegradability are imposed.

Chain oil Q8 bizet bio68

Lubricant crc 6-66

Lubricant crc 6-66

Art. no.: 651466

Grease which is not adhesive but medium-thin, corrosion protection grease, marine. 400 ml. Aerosol. Hazard labelling: flammable.

Corrosion protect crc sp350

Corrosion protect crc sp350

Art. no.: 471191

Grease in high-class grade with high viscosity. Penetrating lubricating film which does not dry. Does not flow off. Protects against moisture and aggressive vapours. Long term protection. Corrosion protection, 24-month indoors. Hazard labelling: extremely flammable, irritant, environmentally hazardous. Aerosol 300 ml

Hydraulic oil Q8 trade 32

Hydraulic oil Q8 trade 32

Art. no.: 317927

Hydraulic oil for mobile and stationary hydraulic systems. High viscosity index and good low-temperature characteristics enable use within a very broad temperature range. With zinc-containing wear-resistant additives.

Gear oil Q8 goya nt68

Gear oil Q8 goya nt68

Art. no.: 910343

Q8 Goya NT oils have EP properties for industrial gearing. Intended for bevel and worm gears, heavily-loaded bearings, and for general machine lubrication. Specially developed for very demanding applications, such as in wind turbine gearing. Gives reduced power loss and higher efficiency. High natural viscosity index. Very high wear protection (EP). Excellent protection against micro-pitting. Good air and water separation abilities Minimal foaming Protects against rust and corrosion, even in
the presence of salt water. Good oxidation stability and thermic stability allows for longer replacement intervals. Registered in Basta.

Cable Lubricant NN640

Cable Lubricant NN640

Art. no.: 1600407

Cable lubricant Polywater NN640.
Lubricant for power cables in tough conditions.

Lube silicon glidex unipack

Lube silicon glidex unipack

Art. no.: 3115109

GLIDEX Spray are versatile and effective sprays that are completely free of organic solvents and ozone-damaging propellants. NSF-approved for use in the food industry. GLIDEX Spray provides light, problem-free assembly of plastic collar pipes, rubber strips, and rubber gaskets. The silicone content means that even after an extended period, the pipe segments can be disassembled; the silicone also protects the rubber gasket against drying out or decaying. Good adhesion in wet/moist environments. GLIDEX Spray is also useful in pulling installation cables in pipes, and as a moisture barrier for conductive parts; it is also an effective, quick-acting lubricant for stuck locks, hinges, fittings, tools, etc.

Lubricant, Uponor

Lubricant, Uponor

Art. no.: 3115136

For lubrication of the ends of the PVC pipes in connection with mounting of rubber sealed joints.

Lubricant, Uponor

Gear oil Q8 el greco220

Gear oil Q8 el greco220

Art. no.: 419172

Synthetic bevel and worm gears oil
Q8 El Greco is a synthetic Long life oil with EP properties
Industrial gear units Intended for bevel-,
screw and screw gears, heavy loaded bearings, hard
Heavy loaded screw gears with spiral cut bevels
for crushing work and for general machine lubrication.
Specially developed for many demanding applications
for example in windmill gears.
Provides reduced energy loss and higher efficiency thanks to lower friction and very
Good viscosity characteristics. Gives reduced energy loss and higher
efficiency
· High Viscosity index
· Good low-temperature properties
· Very high wear protection (EP)
· Excellent protection against micro-pitting
· Good air and water separation powers
· Minimal foaming
· Protects against rust and corrosion even when
there is salt water
· Very good oxidation stability and thermal
stability permits for longer oil change intervals
· Mixable with mineral oils
· Saves gaskets, sealing materials and
varnishes
· fulfils the highest demands in FZG Grey
Staining Test
TYPE DATA. Registered in Basta.

Oil engine Q8 t 52010w-30

Oil engine Q8 t 52010w-30

Art. no.: 412673

High quality engine oil for 4-stroke diesel and petrol engines. For change intervals of up to 4,500 miles in trucks with long distance traffic. Suitable for converters and transmissions where engine oil is also recommended, can thus serve as unit engine oil for hauliers, contractors, etc. Unit engine oil for mixed vehicle fleets of
petrol- and diesel-powered vehicles. Minimal cylinder feed polishing. Approved for extended change intervals. Approved as transmission oil in certain
transmissions where engine oil can be used.

Oil engine Q8 t 52010w-30

Oil engine Q8

Art. no.: 370696

SHPD-type engine oil for petrol and diesel engines in trucks, busses and industrial machinery. Approved for extended change intervals up to 100,000 km for Volvo trucks and busses i long distance services equipped with Euro 3-engines. Also developed for Euro 4 engines. Specially adapted for very difficult operating conditions. Useful year-round. Meets the highest European and American Quality levels. Developed for diesel engines with low emission values.

Silicon industrial crc 30053

Silicon industrial crc 30053

Art. no.: 471107

Silicone oil that protects and lubricates all surfaces with an invisible, durable protective film. Water-repelling. Excellent impregnation and releasing agent. For maintenance and protection of all rubber parts. Freshens up artificial fibre, leather and rubber. Create a durable and water-repellent film. Impregnation and releasing agent. Temperature range: -40° to +270 °C Hazard marking: extremely flammable, irritant, environmentally hazardous.

Oil chain-oil spray crc

Oil chain-oil spray crc

Art. no.: 563876

Grease with soft foam effect that provides excellent penetration and prevents dripping. Contains PTFE. Temperature interval -15ºC to 175ºC. Food grade NSF H1.

Oil lube crc

Art. no.: 471157

Grease With low viscosity and good penetration. Dissolves rust, scale and dirt. Does not create resin. Creates a water-repellent coating. Operating temperature from -20ºC to +120ºC. Approved food grade NSF H1. Hazard labelling: Harmful to health.

Lubricant dry lube crc

Lubricant dry lube crc

Art. no.: 462164

Dry powder lubricant with PTFE. Grease, silicon and oil-free. Works as a release agent when casting plastic or as a dry lubricant in glassed in aluminium sections, plane tables, jig-saws. Temperature range -30°C to +250°C. Hazard labelling: Extremely flammable, irritant.

Lubricant antikorr crc 3-36

Lubricant antikorr crc 3-36

Art. no.: 122039

Lubricant and corrosion protection that stops rust and corrosion on all iron and non-iron metals during storage, production and transport. Displaces and excludes moisture. Penetrates and lubricates. Protects against corrosion. Releases rusted and stuck parts. Intended to be used as a lubricant on places where there is no risk for contact with food stuffs. Hazard labelling: Highly flammable. Food grade NSF H2.

Lubricant antikorr crc 3-36

Lubricant antikorr crc 3-36

Lubricant crc power lubeptfe

Lubricant crc power lubeptfe

Art. no.: 462155

Lubricant resistant to high pressure, which gives long-lasting protection against friction and wear. Unique combination of high-quality oils makes it superior to traditional greases. Used for threads, glide controls, locks and more. Contains PTFE. Provides long-lasting protection against friction and wear. Withstands high pressure and difficult conditions. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Art. no.: 471480

All-round product that dissolves rust, grease and resin, drives out moisture, lubricates, stops squeaks and creaking and release stuck mechanisms, 556. Protects in corrosive environments and prevents rust. Item 10052: Labelling: harmful to health.

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Universal Oil CRC 5-56

Universal oil crc 5-56 ptfe

Universal oil crc 5-56 ptfe

Art. no.: 471106

All-round service spray, fast penetrating, cleaning all-round oil with PTFE which improves the lubricating capabilities, dissolves grease, resin and dirt, drives out moisture and stops squeaks and creaking. Releases mechanisms that have become stuck and it leaves a thin protective film in the corrosive environment and stops rust. Based on paraffin oil and a versatile organic preventative system of additives. 400 ml.

Oil chain-oil chain guard

Oil chain-oil chain guard

Art. no.: 230634

Thin, water-repellent chain lubricant for high loads. Provides excellent corrosion protection. Contains molybedenum sulphide. For lubricating and protecting chains and conveyors that work with heavy loads. Suitable for use on truck chains. Flammable.

Gejder oil magna sw 68

Gejder oil magna sw 68

Art. no.: 563852

For lubricating gliding surfaces in machine tools. Does not emulsify in cutting liquids, which is a great advantage in modern NC machines.

Lockoil crc

Art. no.: 305292

Lubricates all moving parts to extend the service life of the lock and improve its function. The cleaning oil dissolves dirt which results in a better protection against corrosion. Hot and cold water-resistant. Non-drying oil. Temperature range -30°C - +100°C. 100 ml.

Lubricant senco spray 520ml

Lubricant senco spray 520ml

Art. no.: 258265

Grease Senco spray for nail guns. Hazard marking: extremely flammable, irritant, environmentally hazardous.

Lubricant senco spray 520ml

Glidex silicone spray

Glidex silicone spray

Art. no.: 4051316

Silicon-based lubricant for plastic collar pipes. Extra lubrication properties. Facilitates adjustment/dismantling. Protects rubber. Skin-friendly pH value. Frost-proof. Unipak -30°C is also adapted for working temperature -30°C. In spray can.

Spray bottle to wd-40

Spray bottle to wd-40

Art. no.: 193048

Plastic hand spray applicator, designed for applying WD-40 fluid. The pump is specially designed to work with petroleum based lubricants. Buy multiple plastic sprayers with a gallon of WD-40 and keep them right where you need them.

Universal Oil Ironside

Universal Oil Ironside

Art. no.: 377104

Multi-functional universal oil which lubricates and repels moisture. Cleans and protects as well as removes adhering mechanisms. Dissolves and makes it possible for all rusty or oxidised screws, bolts, nuts, tools, hinge mechanisms, rolls etc. to work again. Protects and seals all even and solvent-resistant surfaces of metal, plastic, PVC, rubber etc.
Equivalent to 123582 as well as WD-40.

Industrial silicone spray Ironside

Industrial silicone spray Ironside

Art. no.: 377105

Silicone oil that protects, lubricates plastic and rubber parts, and isolates surfaces with invisible, durable protective film. Works also as cable release agent etc.
Equivalent to 224 074.

copper paste Henkel

copper paste Henkel

Art. no.: 313992

Copper-based anti-seizing paste. Typical applications: screws, nuts, pipes, bolts on exhaust gas systems, brake bolts. LOCTITE LB 8007 - spray bottle.

Engine oil Q8 T520

Engine oil Q8 T520

Art. no.: 499945

Engine oil SAE 30W, Engine oil for 4-stroke diesel engines with or without turbo
And diesel engines without turbo and suitable for converters, retarders and transmissions.

The viscosities of SAE 30 and SAE 40 are even adapted to be used in Detroit Diesel
Two stroke diesels, apart from marine two parts diesel.

API CD/SF, Volvo STD 97485-10/12/23/30, MIL-L-2104C/ MIL-L-46152C, CCMC G2, PD1, D2, MAN 270, MB 227.0,

Caterpillar TO-2, Allison C-3, Clark Form TLC-25 3M 8-83, DANA Spicer Bulletin 2508-9, Eaton/Fuller Bulletin 2052,

Voith (retarder), ZF TE-ML 03B

Engine oil Q8 Sprint

Engine oil Q8 Sprint

Art. no.: 292689

Synthetically based oil for air and water cooled two stroke petrol engines in mopeds, snow mobiles etc. Also adapted for engines with a separate oil tank.

Hydraulic oil Q8 Haydn 32

Hydraulic oil Q8 Haydn 32

Art. no.: 318055

Q8 Haydn is an oil for being mobile and stationary
internal hydraulic system. Suitable for bearings,
Regulators, bevel gears and general circulation and
machine greasing. Contains Zinc
Antiwear additives (AW). The oils are even
Suitable for oil mist lubrication.

The advantages:
High natural viscosity index
Fulfils the highest requirement for filterability with
Hydraulic pump manufacturers
Good air and water separation powers
Good wear protection
Protects against rust and corrosion
good oxidisation stability and thermic
stability permits for longer oil change intervals
Minimal foaming

Hydraulic oil Q8 Haydn 46

Hydraulic oil Q8 Haydn 46

Art. no.: 318056

Q8 Haydn is an oil for being mobile and stationary
internal hydraulic system. Suitable for bearings,
Regulators, bevel gears and general circulation and
machine greasing. Contains Zinc
Antiwear additives (AW). The oils are even
Suitable for oil mist lubrication.

The advantages:
High natural viscosity index
Fulfils the highest requirement for filterability with
Hydraulic pump manufacturers
Good air and water separation powers
Good wear protection
Protects against rust and corrosion
good oxidisation stability and thermic
stability permits for longer oil change intervals
Minimal foaming

Hydraulic oil Q8 Trade 46

Hydraulic oil Q8 Trade 46

Art. no.: 910353

Q8 Haydn is an oil for being mobile and stationary
internal hydraulic system. Suitable for bearings,
Regulators, bevel gears and general circulation and
machine greasing. Contains Zinc
Antiwear additives (AW). The oils are even
Suitable for oil mist lubrication.

The advantages:
High natural viscosity index
Fulfils the highest requirement for filterability with
Hydraulic pump manufacturers
Good air and water separation powers
Good wear protection
Protects against rust and corrosion
good oxidisation stability and thermic
stability permits for longer oil change intervals
Minimal foaming
TYPE DATA

Showing 52 of 94