Order lines: 0

Ahlsell Products Consumables Chemical technology and hygiene Oil - grease - cutting fluids Lubricating grease

Lubricating grease

Ahlsell's range of consumables spans chemical technology and hygiene, sealing strips, hoses, sealing, car accessories and the coffee for the afternoon.

Products (50)

Universal fat Food grease PRML NSF

Universal fat Food grease PRML NSF

Art. no.: 471103

Universal fat Food grease PRML NSF

Wheel bearing grease Q8 Rubens WB

Wheel bearing grease Q8 Rubens WB

Art. no.: 910330

Lithium complex saponified mineral oil based
lubrication grease with high lubrication power, containing EP-additives and
rust protection additives. Has much better resistance at high
temperatures than common universal grease. Excellent all round grease for
crushing plants.
Typical usage areas
Asphalt machines, paper machines
Steel and aluminium industry
wheel bearings in busses and trucks in difficult operational conditions
Wheel bearings in vehicles equipped with disc brakes

The advantages:
Multi use grease with a wide area of use.
Very good thermal stability
Long greasing intervals
Excellent rust protection properties
Good water resistance and mechanical stability.
Lead free
Maintains its original consistency even after
temperature shocks over 250°C.

Wheel bearing grease Q8 Rubens WB

Contact grease

Art. no.: 0650710

Reliable connections for aluminium wires can only be achieved in case the connection place is cleaned with a steel brush and lubricated with protective grease.
In plastic tube. Protects against oxidation and corrosion. Does not stiffen in the cold.

Bearing grease FAG Arcanol Multi2

Bearing grease FAG Arcanol Multi2

Art. no.: 377016

Unipak Geotextile

Unipak Geotextile

Art. no.: 3873013

Unipak® Geotextile is suitable for use in conjunction with HBS-200® liquid rubber for repairing joints, cracks, or gaps.

Unipak HBS-200 1 L

Unipak HBS-200 1 L

Art. no.: 4102007T

Unipak® HBS-200® Liquid Rubber is a waterproof, airtight, and protective coating.
Suitable for sealing and protecting a wide range of materials, such as concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM, etc. For floors, partitions, walls, connections, joints, pipe penetrations, and building components. Excellent for both indoor and outdoor use (bathrooms, basements, balconies, roofs, etc.), including gutters, shower cabins, pipe penetrations, floor surfaces, expansion joints, window frames, and terrain-related elements. Also suitable as a waterproof layer under tiles in damp environments such as bathrooms, swimming pools, balconies, and terraces.

Bearing grease epfood 8054

Bearing grease epfood 8054

Art. no.: 308234

Ball bearing for machines within the food industry NLGI-2. Good pressure resistance, contains white particles and PTFE. Protects against corrosion in damp and wet environments, cold storage, etc. Temperature range -30°C to +160°C NSF H1.

Bearing grease epfood 8054

Long-term grease CRC 3010 water repellent

Long-term grease CRC 3010 water repellent

Art. no.: 157076

Lithium soap-based EP grease (extreme pressure), which contains molybdenum disulphide for bearings under extreme mechanical loads.

Long-term grease CRC 3010 water repellent

Ceramic Paste Plus

Ceramic Paste Plus

Art. no.: 80916649

Art. no.: 308239

For lubrication of bushings, sliding surfaces, and small open gears. Prevents damage during starting and protects during running-in. Protects threaded parts against seizing. Effective from -30 °C to +150 °C as a lubricant and up to +1,100 °C as an anti-seize agent. Instructions: Ensure the surfaces to be treated are clean and dry. Spray a thin layer. Should not be used as a lubricant on roller bearings.

Anti-Seize Lubricant Loctite LB 8150

Anti-Seize Lubricant Loctite LB 8150

Art. no.: 68282266

Anti-Seize Lubricant Loctite LB 8150

Lubrication Q8 rembrandt ep2

Lubrication Q8 rembrandt ep2

Art. no.: 292690

Lithium-saponified universal grease with good rust-protection characteristics and high EP capability, for lubrication of vehicles and stationary machines. Intended for general chassis lubrication, and for lubrication of bearings with medium-to-high RPMs. Good water resistance and high mechanical stability. TTemperature range -30°C - +110 °C. Registered in Basta.

Lubrication Q8 rembrandt ep2

Lubrication Q8 rembrandt ep2

Bearing grease sapphire

Bearing grease sapphire

Art. no.: 230646

Multi-complex thickened bearing grease with MoS². Withstands high loads and vibrations. Extends lubricating intervals for all types of bearings. Temperature range -30ºC to +150ºC.

Vaselin white

Art. no.: 195836

For greasing of plastic and rubber components. Also suitable for impregnation of paper covers on electrical cables and as an outer vibration-damping filler in optic-fibre cable. 1 kg.

Bearing grease foodlube grease

Bearing grease foodlube grease

Art. no.: 230653

White adhesive. Non-toxic. Does not contain mineral hydrocarbons. Withstands high loads. Reduces slippage. Resists water leaching and is therefore suitable for environments where cleaning is done often. Good rust protection properties. Food grade, U.SDA H1.

Bearing grease sapphire

Bearing grease sapphire

Art. no.: 230648

Blue lithium pre-soaped grease. Good adhesion. Resists water leaching. Protects against corrosion. Suitable for most bearings. Gives longer lubrication intervals. Can be used together with most soap-thickened bearing greases. Temperature resistance -30°C to +150°C.

Bearing grease sapphire

Bearing grease sapphire

Art. no.: 230651

With synthetic base oil. For high temperatures, -40° to +200°. For lubrication of bearings. Silicon free.

Paste copper-paste crc

Paste copper-paste crc

Art. no.: 157081

Soft all-round paste. Intended to prevent burning and fixation by rusting caused by high temperatures up to 1100° C. Particularly suitable for simplifying disassembly of treated parts, even after long periods of use. For breaks, bolts, exhaust systems, exhaust manifolds, spark plugs, engine bolts, fittings and turbos. Protects the battery poles from oxidation.
CRC 3041 - Hazard labelling: Extremely flammable, irritant.

Paste copper-paste crc

Paste copper-paste crc

Paste copper-paste crc

Paste assembly paste

Paste assembly paste

Art. no.: 471105

Assembly paste and anti-seize compound. For lubrication of bushes, sliding surfaces and gears. Prevents damage at start-up and protects during running-in. Protects against seizing of threaded components. Effective from -30°C to +150°C as a lubricant and to +1100°C as an anti-seize. NSF H1. Hazard labelling: Extremely flammable.

Paste assembly paste

Silicone grease molykote 55m

Silicone grease molykote 55m

Art. no.: 180037

Silicone-based grease for O-rings, for lubrication of rubber and metal applications. Very oxidation stable, compatible with most plastic and rubber materials.

Lube chain-lube molykote mkl-n

Lube chain-lube molykote mkl-n

Art. no.: 180053

Chain grease MoS² for lubrication of highly loaded chains. Free-flowing during application in order to penetrate into contact surfaces, after the departure of the solvent, grease is formed which stays very well. 400 ml spray. Hazard labelling: extremely flammable.

Bearing grease molykote

Bearing grease molykote

Art. no.: 105155

Suitable for glide and rolling bearings and for other grease-lubricated machine elements. From the fat, a firm lubricating film is created under pressure which is flattened in to the goods and which gives emergency running capabilities, if other lubrication should disappear.

Bearing grease molykote

Grease universal crc 3045

Grease universal crc 3045

Art. no.: 157078

EP-lithium-based grease for roller and glide bearings in all normal loads and speeds, e.g. for impact loads and vibrations. Other applications are glide-controls, linear controls, connections, cone axles and screw spindles. Temperature range -36°C to +138°C.

Grease universal crc 3045

Silicone grease molycote 111c

Silicone grease molycote 111c

Art. no.: 148943

A non-melting silicon paste Lubrication and sealing agent for valves. Resistant to water and oil. Good resistance to most chemicals. Low volatility. No swelling effect on most rubber and artificial resins. Even if it is exposed to higher temperatures during a longer time, it neither hardens nor melts. Insoluble in water, methanol, ethanol, acetone, glycol or glycerine. Withstands most water solutions of non-organic salts and diluted acids and bases.

Paste assembly-paste g-rapid t

Paste assembly-paste g-rapid t

Art. no.: 270075

With solid lubricants. Broad Areas of use. Has very low friction coefficient. By applying the paste to the cleaned metal surfaces, a lubricating film of solid lubricant It is developed which reduces friction, prevents metal-to-metal contact (cutting, overheating), protects against wear and gives emergency operation capabilities. The solid lubricant is pressure-resistant up to the yield point for all known metals. High age and temperature resistance. Hazard labelling: Extremely flammable.

Paste assembly-paste molyk. g-

Paste assembly-paste molyk. g-

Art. no.: 105152

All-round. A combination of molybedenum sulphide and white solid lubrication agent. By massaging in the paste to the cleaned metal surfaces, a lubricating film of solid lubricant It is developed which reduces friction, prevents metal-to-metal contact (cutting, overheating), protects against wear and gives emergency operation capabilities. The solid lubricant is pressure-resistant up to the yield point for all known metals and has a high age and temperature resistance.

Paste lubricant-paste pro crc

Paste lubricant-paste pro crc

Art. no.: 228297

Anti-sieze agent paste. Built up of ceramic balls. For temperatures up to 1400°. Creates a corrosion protective film on steel that is sensitive to rust. Suitable as an insulative between different metals. Prevents burning and simplifies disassembly after a long period of use at high temperatures and after fixation by rusting on e.g. brakes, bolts and exhaust systems. Used for ovens or as a fixing spray when welding. Hazard marking: irritant, CRC 10718 = extremely flammable, irritant, environmentally hazardous.

Paste copper-paste loctite 806

Paste copper-paste loctite 806

Art. no.: 260454

Anti-seize paste in a tube package for simpler and easy use, easily fits in the pocket or the toolbox and is suitable for most applications. Lubricates and prevents seizing on, for example, bolted joints. 8060 is aluminium-based and withstands temperatures up to 900° C. Copper-based and withstands temperatures up to 980° C. Hazard labelling: irritant.

Paste copper-paste loctite 806

Grease high temperature crc

Grease high temperature crc

Art. no.: 305294

EP lithium-based grease for roller- and slide bearings for high pressure and continuously high bearing temperatures.

Grease high temperature crc

Friction coat. molykote d321r

Friction coat. molykote d321r

Art. no.: 242855

Usable in a wide temperature range. Quick drying. Hardens in the air after just a few minutes to an adhesive dry lubricating film. As the fixed lubricating layer, even at the highest surface pressure, prevents metallic contact, friction and where are considerably reduced. Good resistance to solvents. Good rust protection properties. Used in lubrication places with high loads and low gliding speeds, oscillating movements, intermittent operation where dry lubrication is desired, at extreme temperatures, when lubricating in a high vacuum, for improvement of running-in, for dry metal processing and for reducing dissonance during operation. Extremely flammable.

Glidexfittings greas

Glidexfittings greas

Art. no.: 8346010

Glidex fitting lubricant is DVGW-approved for drinking water and made of 100% clean, odourless silicone oil. Suitable for lubrication of O-rings in drinking water fittings and especially suited for EPDM and NBR rubber. Temperature load from -40 to +200oC.

Silicone grease loctite 8104

Silicone grease loctite 8104

Art. no.: 4051208

Colourless silicone-based grease, with silica gel as a thickening agent. Temperature resistant up to + 200° C, suitable for lubrication of most plastics and elastomeric components.

LOCTITE LB 8104 is a colourless silicone-based lubricant, with silica gel as a thickening agent. It has a wide temperature range (up to + 200° C), and is suitable for lubrication of most plastics and elastomeric components. It has H1 NSF Registration Number 122981 and NLGI Class 2/3.

The advantages
Silicone grease
Valve and gasket grease
Wide temperature range, up to +200°C
For lubricating most plastics and elastomeric components
H1 NSF reg no.: 122981
NLGI class 2/3

Silicone grease loctite 8104

Martinfett Q8 Ruysdael

Martinfett Q8 Ruysdael

Art. no.: 419265

Q8 Ruysdael WR 2 is a water free calcium saponified,
mineral oil based Lubricating grease containing EP-additives and
rust protection additives.
Q8 Ruysdael WR 2 is specially adapted for heavily loaded
slide and- roller bearings at normal temperatures and
moderate revolutions and for lubrication of chassis, industrial,
agricultural and forest machinery, harvesters, water pumps,
Propeller casing and similar. Excellent for marine
Applications It is especially suitable when extended
greasing intervals are a practical necessity, for highly
loaded or shock loaded grease lubricated application
happens or when exceptionally good adhesion and
rust protection properties are desired.

The advantages:
Broad Areas of use.
long greasing intervals.
Excellent rust protection properties
Excellent water resistance and mechanical stability.
Lead free.

Martinfett Q8 Ruysdael

Universal grease Q8 Rembrant Moly

Universal grease Q8 Rembrant Moly

Art. no.: 317986

Q8 Rembrandt Moly S2 is a lithium saponified, mineral oil based
lubrication grease with high lubrication power, containing EP-additives and
rust protection additives. It is reinforced with molybdenum disulphide
(MoS2), which gives very high tolerance against high pressure and
shock loads.

The advantages:
Multi use grease with a wide area of use.
tolerates very high pressure and shock loads.
long greasing intervals.
Excellent rust protection properties
Good water resistance and mechanical stability.
Lead free.
Good adhesive qualities.

High-temperature fat Q8 Rubens

High-temperature fat Q8 Rubens

Art. no.: 910356

Lithium complex saponified mineral oil based
lubrication grease with high lubrication power, containing EP-additives and
rust protection additives. Has much better resistance at high
temperatures than common universal grease. Excellent all round grease for
crushing plants.
Typical usage areas
Asphalt machines, paper machines
Steel and aluminium industry
wheel bearings in busses and trucks in difficult operational conditions
Wheel bearings in vehicles equipped with disc brakes.

The advantages:
Multi use grease with a wide area of use.
Very good thermal stability
Long greasing intervals
Excellent rust protection properties
Good water resistance and mechanical stability.
Lead free
Maintains its original consistency even after
temperature shocks over 250°C.

Lubricating grease Sheerol EPL2

Lubricating grease Sheerol EPL2

Art. no.: 563868

Extreme pressure lithium based grease, general purpose based on mineral oil and incorporate high pressure agents to protect the inventory components that are subject to heavy, shock loads.

Lubricating grease Mobilgrease XHP

Lubricating grease Mobilgrease XHP

Art. no.: 277028

Mobilgrease XHP™ 220 greases are extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting edge, proprietary, lithium complex manufacturing technology. They are formulated to provide excellent high-temperature performance with superb adhesion, structural stability and resistance to water contamination. These greases have a high level of chemical stability and offer excellent protection against rust and corrosion. These greases feature high dropping points and maximum recommended operating temperature of 140º C. Mobilgrease XHP 220 greases are available in NLGI grades 00, 0, 1, 2 and 3 with an ISO VG 220 base oil viscosity.

Lithium-based Fat CRC

Lithium-based Fat CRC

Art. no.: 157077

Lithium-based grease for roll- and slide bearings for high pressure and continuously high bearing temperatures.

Lithium fat CRC 5050

Lithium fat CRC 5050

Art. no.: 462178

Highly durable lubricant.
CRC White Lithium Grease is a white, lithium‑based NLGI grade 2 lubricant of high purity and quality, formulated with an advanced additive package for superior lubrication performance. The product has a smooth, buttery consistency to ensure optimal surface coverage. Temperature range: -18°C to +177°C.

Properties:
Provides long-lasting lubrication.
Excellent resistance to water and heat.
Contains rust and oxidation inhibitors that ensure very good metal protection.
Forms a high‑viscosity film.
Suitable as a water-resistant lubricant thanks to its strong resistance to water.
Reduces friction and wear in metal‑to‑metal and metal‑to‑plastic connections.
Sprays on like an oil but settles as a lubricant.
Suitable for vertical surfaces; does not run or drip.
The white color facilitates visual inspection of film coverage.
Spray cans use hydrocarbon propellants for precise application and film thickness.

Long-lasting lubrication for:
Hinges, lock cylinders, cables, speedometer cables, tracks, slide conveyors, brake and gear mechanisms, distributor cams, seat rails, guide rails, garage door tracks, water pumps, open drive wheels, and chains.

Lithium fat CRC 5050

Faucet Grease, Oras

Faucet Grease, Oras

Art. no.: 8592300

Lubricant Extreme Lube PRML

Lubricant Extreme Lube PRML

Art. no.: 471108

Lubricant Extreme Lube PRML

Lubrication Master LG 130

Lubrication Master LG 130

Art. no.: 471230

Master LG 130 Liquid Grease is a very durable, non-saponified grease. The LG 130 contains high molecular polymers that provide a fantastic attachment to metals, withstand high loads and ensure long-term lubrication even on exposed parts. The product also protects against corrosion. The LG130 is suitable for lubrication of chains, konveyers, power transmissions, vires, hinges and wherever you want a durable lubricating film. Excellent for lubrication of racks and recommended for use in workshop, industry, marine environments etc.

Master LG 100 Lithium Grease

Master LG 100 Lithium Grease

Art. no.: 748107

Master LG 100 Lithium Grease is a mineral oil-based, lead-free lithium grease with EP additives, which allows the grease to withstand very high pressures. LG 100 contains rust-protective agents that provide protection against rust even in salty environments. Some areas of use include window regulators, rails, packing boxes, bearings, open gearboxes, etc. Temperature range -35°C to +100°C. Color: Oil brown.

Green Propellant product, which means that through the mass balance principle, it is ensured that the corresponding amount of propellant in the can is produced from renewable raw materials. Compared to propellant of fossil origin, this results in a CO2 reduction from propellant production by 40-90%, depending on the gas.

Contact grease 500 ml

Contact grease 500 ml

Art. no.: 0654590

The grease has no oxide-degrading or corrosive ability, but is only intended to prevent new corrosion. Before connection, the oxide and dirt must be carefully removed. Temperature strength + 90º C continuously and + 200º C in the event of a short circuit. Packed in plastic tube.

Grease Renolit Uniway LIX 42 Fuchs

Grease Renolit Uniway LIX 42 Fuchs

Art. no.: 469152

High Temperature Grease Master HTAP 800 High Temp Aluminium Paste

High Temperature Grease Master HTAP 800 High Temp Aluminium Paste

Art. no.: 774958

Master HTAP 800 High Temp Aluminum is an aluminum-based solid lubricant high-temperature grease that prevents seizing, corrosion, and galling even at very high temperatures. The product is resistant to mild alkaline and acidic solutions. HTAP 800 High Temp Aluminum is free from allergenic lead, copper, and nickel compounds.

Green Propellant product, which means that through the mass balance principle, it is ensured that the corresponding amount of propellant in the can is produced from renewable raw materials. Compared to propellant of fossil origin, this results in a CO2 reduction from propellant production by 40-90%, depending on the gas.

Ceramic Paste aerosol

Ceramic Paste aerosol

Art. no.: 79173216

HIGH TEMP SYNTOIL

HIGH TEMP SYNTOIL

Art. no.: 83162783

Spray Master High Temp Syntoil is a fully synthetic oil, enhanced with hexagonal boron nitride for demanding applications. It can be used in automotive, marine, home, and industrial settings where longer lubrication intervals are desired. It's excellent for lubricating pneumatic tools, locks, hinges, chains, and cables. Temperature range: -30°C to +900°C.

Art. no.: 87904445

Art. no.: 87904379

Showing 50 of 50