Order lines: 0

Ahlsell Products Construction range Dry mortar and Additives

Dry mortar and Additives

Concrete and plaster

Masonry & Plaster Mortar

Primer, surface and sealing coat

Additives and chemicals

Construction range for those who work with contracting, construction services, and craft services. Ahlsell has a wide construction range of concrete complements, building materials, furnishings, fixings, sheet metal, studs, and fittings.

Products (90)

Expanding Grout Mapefill N-HL

Expanding Grout Mapefill N-HL

Art. no.: 608249

Expanding, cement-based grouting mortar with good flowability and very high compressive strength in thicknesses less than 150 mm.

Expanding Grout Mapefill N-HL

Primer G 21

Art. no.: 765138

A water-dilutable styrene acrylate dispersion with high adhesion. Intended to be used as a primer for Finja’s floor screed, filler products and industrial floors. Delivered in concentrated form and is diluted to the recommended concentration. Priming of concrete, light concrete, wood or tiles to ensure good adhesion this between the surface and the surface to be laid. Finja Primer is water damage-proof.

Art. no.: 277405

EPS Cement is concrete and insulation in one product! The material consists of cement and small air-filled particles EPS (Expanderad Polystyrene), the most used construction insulation material in the world.
EPS Cement is a revolutionary fast-drying and high-filling aerated concrete for both small and large grouting applications. Fill in water, mix and grout! You get self-drying sound- and heat-insulating aerated concrete, which is easy to apply, semi-rigid, fire- and frost-proof. EPS Cement is perfect for floor grouting but also for many other areas of application.
Delivered in a whole pallet of 21 bags by the supplier.

KC PLASTER MORTAR C

KC PLASTER MORTAR C

Art. no.: 365564

Dry mortar that is mixed with water to get a ready-to-use mortar for plastering above ground. Contains lime and cement as binding agents. Intended for fine plastering, felting, sludging and repair of KC plastered underlay. Rec. plaster layer thickness max 5 mm.

KC PLASTER MORTAR C

Joint mortar, Bemix F4 FF

Joint mortar, Bemix F4 FF

Art. no.: 478196

Repariing mortal, Sika Quick 506 FG

Repariing mortal, Sika Quick 506 FG

Art. no.: 254279

Plaster for repair of concrete, light concrete, plaster and stone in houses and other similar
constructions.

Repariing mortal, Sika Quick 506 FG

Filling Compound Finja 420 DR

Filling Compound Finja 420 DR

Art. no.: 365539

Dust-reduced, cement-based filler for underlay of concrete, light concrete, stone and ceramics, would and floor plasterboard. Used for fine levelling and lesser slopes. Suitable as underlay for glued carpets, tiles or loose-laid wood floors. For indoor use.

Filling Compound Finja 420 DR

GROUT/Fix Ardex X77

GROUT/Fix Ardex X77

Art. no.: 694896

GROUT/Fix Ardex X77

EPS CONCRETE

Art. no.: 365541

Easy and insulating light weight filling for levelling and filling. Used on most and delays indoors and outdoors before levelling with Finja’s floor products. Dust-reduced, pumpable and suitable under heated floors. Layer thickness 20-500 mm.

Home Fix Finja

Art. no.: 70901387

Perimeter strip, Ardex TP-50

Perimeter strip, Ardex TP-50

Art. no.: 746479

EXPANDING MORTAR, Bemix P-3

EXPANDING MORTAR, Bemix P-3

Art. no.: 305869

Certified mortar for grouting. Used in standard grouting and as pump concrete for inaccessible moulding, as well as casting of new bathroom floors, mat-coatable in 2 days. Final strenght approx. 60 MPa. Rec. thickness 20-150 mm.

Float Putty Industry

Float Putty Industry

Art. no.: 695013

Cement-based self-drying and pumpable floor screed for indoor use. Water damage resistant and intended as underlay for glued carpets, tiles and wood floors. Fulfils HusAMA’s demands on floor screed. On dried, non-sealed underlay, the product can receive a carpet after 1 day.

MORTAR B

Art. no.: 365558

High quality factory made dry mortar for brickwork of e.g. expanded clay blocks, concrete blocks and tile.

Repair concrete, Redirep 45 RSF

Repair concrete, Redirep 45 RSF

Art. no.: 306460

Thicknesses 5-50 mm, including on wall. Used on bridges, balconies, etc. Approved in accordance with the bridge standard.

Repair concrete, Redirep 45 RSF

CONSTRUCTION Cement

CONSTRUCTION Cement

Art. no.: 74659509

Cement is mixed with ballast and water into concrete or cement mortar. Intended for normal casting of beams, house foundations, supporting walls, pillows, plinths, walls and stairs. Cement mortar intended for repair and plastering of concrete and brick as well as brick-working of concrete blocks in damp environments.

CONSTRUCTION Cement

Adhesive Mapei Redisit

Adhesive Mapei Redisit

Art. no.: 267603

HEAVY CONCRETE, ROUGH

HEAVY CONCRETE, ROUGH

Art. no.: 604033

Smoothing Trowel Silicone Rubber

Smoothing Trowel Silicone Rubber

Art. no.: 175545

Silicone rubber. Aid for creating even and detailed silicone joints. For moulding, installation and floor joints.

Shut-off strip

Art. no.: 295847

Blue self-adhesive foam plastic (polyester). Used as separator in connection with floor filling. Installed on well-dried polymer surface.
Stocked: LC.

Injection set and casting funnel

Injection set and casting funnel

Art. no.: 305875

Jointing concrete element. Jointing of stone walls. Filling in moulds in narrow spaces. Filling in drill holes - all directions. Underpinning.
Rectangular or respectively round nozzle.

EXPANDING MORTAR, Bemix standard

EXPANDING MORTAR, Bemix standard

Art. no.: 305863

Expanding cement-based dry mortar. Used for anchoring and grouting of machines, crane runways, overhead cranes etc. Recommended grouting thickness 20-70 mm non-reinforced, 30 mm reinforced upwards. Pumpable, certified AMA installation. 70 Mpa

EXPANDING MORTAR, Bemix Fine

EXPANDING MORTAR, Bemix Fine

Art. no.: 305865

Finely expanding cement-based mortar. Contains fine ballast. Used in bolt anchoring and thin grouting. Rec. thickness 5-40 mm. Pumpable. 60 MPa

EXPANDING MORTAR, Refrigeration Bemix

EXPANDING MORTAR, Refrigeration Bemix

Art. no.: 305866

Ready-mixed expanding cold mortar for grouting in minus degrees or when fast moulding is needed. Used when grouting columns, prefab components and whenever fast moulding is required. Final strenght approx. 40 MPa. Rec. thickness 20-150 mm. PLEASE NOTE! Cures in minus degrees

EXPANDING MORTAR, Bemix A-3

EXPANDING MORTAR, Bemix A-3

Art. no.: 305868

Expanding dry mortar based on construction concrete with cold additive. Used for grouting of bridge bearings, railings etc. Recommended grouting thickness 20-15 mm non-reinforced, 30 mm reinforced upwards. Pumpable. Certified AMA installation.

EXPANDING MORTAR, Bemix A3 FF

EXPANDING MORTAR, Bemix A3 FF

Art. no.: 305867

Expanding dry mortar based on construction concrete with cold additive. Used for grouting of bridge bearings, railings etc. Recommended grouting thickness 20-15 mm non-reinforced, 30 mm reinforced upwards. Pumpable. Certified AMA installation. 60 MPA

Art. no.: 305858

Tixotropt certified cement-based repair mortar with expansion. Used in all types of concrete repairs e.g. impact holes. Suitable also for jointing granite blocks. Recommended thickness, 5-20 mm. Tixotrop consistency, pumpable.

Concrete / Mortar Addetive

Concrete / Mortar Addetive

Art. no.: 365574

Waterborne epoxy dispersion with high adhesion. Mixed in cement or lime/cement-based mortar and concrete. Can also be used for dust binding concrete surfaces. Does not affect the binding power of the adhesive. Delivered in concentrated form and diluted to the recommended concentration.

Concrete / Mortar Addetive

Concrete / Mortar Addetive

Frost protection additive Sika-3

Frost protection additive Sika-3

Art. no.: 114974

Sika–3: Frost protection additive. Frost protection in concrete and plaster. Do not use in reinforced concrete due to corrosion risk.
Consumption: 1 kg is sufficient for 10-50 litres of use.

Frost protection additive Sika-3

Plaster mill, Finja

Plaster mill, Finja

Art. no.: 365565

Plaster-based mix for use indoors for jamming, grouting and repair on substrates such as bricks, light tiles, light concrete, plasterboard, etc.

Plaster mill, Finja

Snail dynamite

Art. no.: 267651

Expanding agent for cracking of rock, stone and concrete.

WINTER CONCRETE

WINTER CONCRETE

Art. no.: 402750

Dry mortar is only mixed with water and produces a ready to use concrete paste. Is used in casting work in freezing temperatures and in layers thicker than 50 mm.
Suitable for i.e. plinths, Supporting walls and stairs. >30 MPa.

WINTER CONCRETE

Mixing bucket

Art. no.: 365543

20 litre mixing bucket. Transparent graduated.

Level stick

Art. no.: 365550

The levelling stick is made of Plastic, self-adhesive and graduated up to 85 mm.

Waterproofer Sika-4

Waterproofer Sika-4

Art. no.: 114985

Very fast binding (about 0.5-3 minutes) cement additive, for cement or cement mortar. Used for sealing leaky surfaces, cracks, and joints in rock, concrete, and masonry with flowing water under pressure.
Can also be used in cement mortar for fixing bolts, eye bolts, and similar in rock and concrete. This product meets the criteria for chemical products under BASTA.
Use:
Instructions: For sealing in locations under low water pressure or with less water flow: mix Sika-4a with clean water 1 to 0.5 or 1 to 4 (Sika-4a: water) depending on the desired bonding time. For sealing in locations under high water pressure or with greater water flow: Sika-4a is used undiluted, or mixed with no more than 3 parts of water, depending on the extent of the leakage.

Waterproofer Sika-4

Cement A35

Art. no.: 295152

ARDEX A 35 is a fast cement that must always be blended with sand with a grain size of 0-5 mm. Depending on the proportion of ARDEX, the sand can adapt to load and usage range. ARDEX A 35 is intended for quick-release kits for solid and liquid casting construction in homes, offices, etc.
Used for casting of for example bathroom floors, levelling of floors, heavier injection moulding and casting, machine foundations etc. Can be used for injection moulding of electric and water heater coils. ARDEX A 35 can be laid in solid concrete construction or used for the casting of liquid constructions. ARDEX A 35 is a cement and should always be blended with sand.

Healing putty Ardex A 828

Healing putty Ardex A 828

Art. no.: 478164

Ardex A 828 is used for filling, repairing stucco fixtures, filling in of join lines in walls and ceiling elements. Also for filling of plasterboard joins with film strips and repairing damage to plaster etc. before wallpapering, affixing wall carpets or painting. Lemon-scented.

Screed Ardex K 75

Screed Ardex K 75

Art. no.: 473255

Ardex K 75 is a low-tension floor screed for stiffening joists in accordance with BBV’s Industry Regulations for floor tiling on wooden joists. Very suitable for filling around drain plug. Not suitable for excessive moisture

EXPANDING MORTAR, Fine

EXPANDING MORTAR, Fine

Art. no.: 478193

EXPANDING MORTAR, Heavy

EXPANDING MORTAR, Heavy

Art. no.: 478194

Putty, all-round, Ardex A 45

Putty, all-round, Ardex A 45

Art. no.: 478167

Repair putty, Ardex A 46

Repair putty, Ardex A 46

Art. no.: 478169

Floor putty fine, A 31 Floor filler

Floor putty fine, A 31 Floor filler

Art. no.: 562146

Putty, universal Ardex F5

Putty, universal Ardex F5

Art. no.: 564095

CONCRETE REPAIR, ARDEX A38 MIX

CONCRETE REPAIR, ARDEX A38 MIX

Art. no.: 564094

Additive Ardex E 100

Additive Ardex E 100

Art. no.: 562233

Floor Primer, Ardex P 51

Floor Primer, Ardex P 51

Art. no.: 562147

Tile Adhesive Ardex S 48

Tile Adhesive Ardex S 48

Art. no.: 478170

FACADE MESH

Art. no.: 569144

Frost protection Finja

Frost protection Finja

Art. no.: 561114

Putty, rapid universal Ardex R4

Putty, rapid universal Ardex R4

Art. no.: 695669

HEAVY CONCRETE, FINE

HEAVY CONCRETE, FINE

Art. no.: 604032

Showing 52 of 90