Order lines: 0

Ahlsell Products Construction range Concrete supplement Removal tracks

Removal tracks

Track support of plastic

Products (15)

Set Screw Bulo

Art. no.: 303317

Adjustment screw to use together with leg and bracket to adjust the screed rail to the right height. Can also be cut to desired length.

Foot Bulo Normal

Foot Bulo Normal

Art. no.: 109841

Track support leg in plastic for hard underlay. Used together with track support cradle and adjustment screw.

Screed Rail CombiForm

Screed Rail CombiForm

Art. no.: 551746

System CombiForm
Combiform is a combined screed,form, stopper, carrier reinforcement holder and crack indicator Banan is made from 1m untreated sheet steel with 8mm polythene strip at the top. It hasa punched out 25mm hole for fittings throughput, and the foot is prepared for place screws, Thanks to its low weight, it is much easier to work on

CombiForm Screw

CombiForm Screw

Art. no.: 295823

System CombiForm
CombiForm set screws make the system light and supple for adjusting the the height. 60-90 mm in diameter.

Bulo Socket

Art. no.: 552103

Internally threaded mounting sleeve for Bulosystem. Drill hole ø 28 mm. Mounting sleeve GMK30 compatible with Uracon concrete board.

CombiForm Elevation Strip

CombiForm Elevation Strip

Art. no.: 551733

System CombiForm
Combiform’s elevation strip gives the system additional advantages. Raiser strip creates a thicker cover layer which if often desired i aggressive environments or outdoors, or heavily used floors. etc. The strip can stay or simple be removed which will the create a contraction joint that would be the equivalent of sawing 30mm deep and 8mm wide.

CombiForm Ground Plate

CombiForm Ground Plate

Art. no.: 286569

System CombiForm
CombiForm ground plate is used together with set screws and is placed on the insulation or on a compromised gravel bed.

Screed Rail Permaban

Screed Rail Permaban

Art. no.: 550516

Permaban are remaining screeding rails in the concrete that simultaneously act as formwork elements. The rails have holes for consistent reinforcement. Perfect for use as reinforcement separators for heavy reinforcement.

Screed Rail BBK

Screed Rail BBK

Art. no.: 254282

The plate line is a profile of galvanized sheet metal with 1.25 mm thickness, which gives a nice and sharp joint edge. At the casting, a plastic guide is placed on the plate. This should be removed after the first scrubbing.

Joining Plate for Screed Rail

Joining Plate for Screed Rail

Art. no.: 254289

Joint sheet for plate rail.

Plastic strip for extraction rail

Plastic strip for extraction rail

Art. no.: 295794

Plastic strip for plate- and concrete rail.

Bracket Bulo

Art. no.: 160839

Track support cradle with square profile in plastic for vaults and ground. Used together with track support leg and adjustment screw.

Bracket Bulo

Art. no.: 303314

Track support cradle in plastic for plate line 30. Used together with track support leg and adjustment screw.

Bracket Bulo

Art. no.: 109843

Track support cradle with round profile in plastic for vaults and ground. Used together with track support leg and adjustment screw.

Foot Bulo

Art. no.: 110428

Track support leg in plastic for soft underlay. Used together with track support cradle and adjustment screw.

Showing 15 of 15