Feedback
Sormat
Through-bolt anchor S-KAK plus hot-dip galvanized
EXPANDER SORMAT S-KAK+ STAINLESS M10/70/50X132 25/P
Article number: Suppl. article no:
533960
9640003329
to see price and stock
S-KAK+ – Hot-dip galvanized, European type-approved, ETA 16/0934 Option 1 – for cracked and non-cracked concrete.
Hot-dip galvanized for indoor and outdoor installations.
S-KA through-bolt anchor is a torque-controlled anchor for use in cracked and non-cracked concrete as well as natural stone.
S-KA+ easily passes through the material during through-installation and is easier to tap into the concrete thanks to its improved cone.
Two setting depths for sizes 8 mm, 10 mm & 12 mm, with the specified tfix measurement and dimension indicated on the anchor body.
Marking on the head shows which length and dimension have been installed, making inspection after installation easier.
Always follow the installation instructions for best results:
1) Drill a hole according to the table in the installation data below
2) Clean the hole with a brush and blow pump
3) Tap in the anchor
4) Tighten the anchor with the recommended torque using a torque wrench
I) Permissible loads in kN for concrete C20/25.
Shear load values apply to a single anchor without the influence of concrete edge.
Hot-dip galvanized for indoor and outdoor installations.
S-KA through-bolt anchor is a torque-controlled anchor for use in cracked and non-cracked concrete as well as natural stone.
S-KA+ easily passes through the material during through-installation and is easier to tap into the concrete thanks to its improved cone.
Two setting depths for sizes 8 mm, 10 mm & 12 mm, with the specified tfix measurement and dimension indicated on the anchor body.
Marking on the head shows which length and dimension have been installed, making inspection after installation easier.
Always follow the installation instructions for best results:
1) Drill a hole according to the table in the installation data below
2) Clean the hole with a brush and blow pump
3) Tap in the anchor
4) Tighten the anchor with the recommended torque using a torque wrench
I) Permissible loads in kN for concrete C20/25.
Shear load values apply to a single anchor without the influence of concrete edge.
- Article number: 533960
- Suppl. article no: 9640003329
- Ean no: 6416031033292
- Replaces art.nbr: 292126
- Material class TD201B
- This is an alternative to item 292126
Technical data
- Packagin Size: 25 ST/150 ST/3000 ST
- Surface treatment: Hot-dip galvanised
- Thread size (metric): 10
- Length: 132 mm
- Thread length: 87 mm
- Max. material thickness: 70 mm
- Drill diameter: 10 mm
- Drill depth: 55-75 mm
- Assembly depth: 48-68 mm
- Base material: Cracked Concrete, Crack-Free Concrete, Natural Stone, Solid Brick