Feedback
Sormat
Expansion anchor s-kak zpl
Expansion anchor 6/35X40 HDG hot-dip g. S-KAK 150pcs Sormat
Article number: Suppl. article no:
233409
9640002100
to see price and stock
S-KAK- Hot-dip galvanised. European type approved, ETA 08/0173 Option 1- cracked and uncracked concrete.
S-KAK through-cut expander is a torque-tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It is useful for installation in industrial and marine environments, where possible long-term corrosion is surrounded by rules and regular controls.
1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.
I) Permitted load kN in concrete C20/25. *Not covered by the ETA values recommended by the manufacturer.
Shear load values apply for an expander without the influence of a concrete edge.
S-KAK through-cut expander is a torque-tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It is useful for installation in industrial and marine environments, where possible long-term corrosion is surrounded by rules and regular controls.
1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.
I) Permitted load kN in concrete C20/25. *Not covered by the ETA values recommended by the manufacturer.
Shear load values apply for an expander without the influence of a concrete edge.
- Article number: 233409
- Suppl. article no: 9640002100
- Ean no: 6416031021008
- Material class TD201A
Technical data
- Packagin Size: 150 ST/900 ST/18000 ST
- Designation: S-KAK
- Surface treatment: Hot-dip galvanised
- Thread size (metric): 6
- Length: 40 mm
- Thread length: 18 mm
- Max. material thickness: 2 mm
- Drill diameter: 6 mm
- Drill depth: 35 mm
- Base material: Cracked Concrete, Crack-Free Concrete, Natural Stone, Solid Brick
- Area of use: Steel structures - Pillar Bases - Benches - Barriers - Cable Ladders - Banisters - Ladders - Elevation Systems
- Approved in accordance with: ETA 08/0173
- Material: Cracked concrete - Uncracked concrete - Natural stone - Solid brick
- Material: Carbon steel