Order lines: 0

Ahlsell Products Ventilation Fans/units FansWet room fans, Fresh

Wet room fans, Fresh

Do you work with the installation of fan units in duct systems? Ahlsell helps you find products with high capacity and easy installation. Fan units are an effective way to remove moisture and bad odors. Suitable for homes, property, or other spaces that require ventilation. Also available are mounting brackets, touch protection, and lead-through pipes. We offer a wide range of fan units. Take a look at our selection of fan units and extraction systems online or in one of our stores.

Downdraught protector K125

Downdraught protector K125

Art. no.: 9302174

Back damper that prevents air from entering when the fan is not running. In the case of a larger duct, a gasket may be used, or the downdraught protection can be taped to the fan. To be mounted in Ø118 duct.

Fan Intellivent ® SKY

Fan Intellivent ® SKY

Art. no.: 9302583

White bathroom fan with humidity, light and air quality sensor. Self-adjusting humidity control. Odor / air quality sensor, starts in case of deteriorated air and runs until the air quality is restored.
Timer, ventilation, all-pole switch, speed control, constant operation. Setting via panel or App.
Factory set with constant operation and humidity sensor activated. For both wall and ceiling mounting. Capacity 140 m3 / h 57 Pa, Sound 3m 19 dB (A), Power 2-5W, IP44, 110-240VAC 50-60Hz. Made in Sweden, 5 year warranty

Fan Pax, Calima

Fan Pax, Calima

Art. no.: 9302508

Fully automatic and control-free, for continuous operation, app-controlled. With built-in all-pole switch.
Features: Fully automatic. Three speed modes and boost mode: - Low speed (basic flow / basic ventilation). - Medium speed (lag time via presence sensor). - High speed (activated via humidity sensor or manual start via switch). - Boost mode, programmed or activated via the app. - Ventilation function, switchable. Mounted against own separate duct Ø100-140 with natural draft (ceiling) or without natural draft (outer wall). Built-in All-pole switch.
With App control via Bluetooth BTLE4.

Accessory for wet room fan Pax

Accessory for wet room fan Pax

Art. no.: 9302371

Various accessories suitable for Pax Fitted series.

back draught shutter Fitted Can be used to avoid air movements in undesired directions during fan installation in ducts without natural circulation (e.g. against an exterior wall). This assumes that another ventilation system handles the building’s basic ventilation flow.
Noskona Pax is installed according to need as a replacement of back draught shutter on the Pax Fitted 31.
All pole switch Fitted According to the standards for household products, EN 60 335-1, can be isolated from the electricity network.
Pax Wall plate Used as a mounting/support frame when the fan doesn’t cover the channel opening and/or when there are issues with screw anchors in the direct vicinity of the channel opening.
Spacer frame Fitted moves the fan 52mm out from the surface, i.e. the same distance that Pax Fitted Fans usually recesses into the ventilation channel. Therefore, together with the spacer frame, it becomes possible to mount the fans in channels smaller than Ø100 mm, or channels where for some other reason it is too cramped for normal installation with an insert.

Accessory for wet room fan Pax

Accessory for wet room fan Pax

Accessory for wet room fan Pax

Heat exchanger Intellivent Celsius, Fresh

Heat exchanger Intellivent Celsius, Fresh

Art. no.: 9302188

Intellivent Celsius is a completely new type of heat exchange. With a unique design, user-friendliness, long service life, low noise level, cleanability, built-in thermostat, and lower energy consumption, it sets a whole new standard for this type of product.
Intellivent Celsius is equipped with built-in electronic thermostat. It starts the fan when the temperature exceeds the set value.
The fan can be adjusted to start between 16 and 30°C. Fan speed can be adjusted between approx. 700 rpm up to the max. approx. 2200 rpm.
Intellivent is also equipped with a constant operation function and integrated safety switch.

Bushing tube Intellivent Celsius G100, Fresh

Bushing tube Intellivent Celsius G100, Fresh

Art. no.: 9302189

Wall penetration for inner wall. Designed for fans that distribute heat from heater, etc. Includes 1x module pipe Ø98/102, length 100 mm and 1x round grille Ø140 mm.

Wall pipe Pax

Art. no.: 9302307

Wall pipe Ø 100 mm in white ABS plastic for wall lead through when installing the fan or wall vent. Wall pipes for jointing, intended for fitting as wall lead through for connection to PAX fans, vents and different grille models. Recommended wall hole-cutting measurement, when installing with PAX Outer wall grille Ø 100, is Ø 110 mm.

Wet room fan Passad 31

Wet room fan Passad 31

Art. no.: 9302367

Fan Passad 31 with built-in humidity control and light sensor and cold draft damper. Wet room fan with cold draft damper for installation in a duct that lacks natural draft (outer wall). Built-in humidity control and regression time. Ball-bearing motor.
Free-blowing 95m3 / h
21dB (A) 3m
230V 50Hz / 4W
Ø100-140
IP44
S / CE

Moisture control
Light sensor with lag time
With cold race damper
Replacement for Pax 231

Cover plate for Calima & Passad fans

Cover plate for Calima & Passad fans

Art. no.: 9302519

Pax cover plate, designed for Pax Calima and Pax Passad, for installation on uneven or damaged walls.

Downdraught damper Calima

Downdraught damper Calima

Art. no.: 9302521

To avoid air movements in undesired directions during fan installation in ducts without natural circulation (e.g. against an exterior wall), the Pax Calima accessory draught shutter can easily be installed afterwards. This assumes that another ventilation system handles the building’s basic ventilation flow. PLEASE NOTE! A draught shutter is detrimental if the fan is installed in a ventilation duct with natural circulation.

Exhaust air pack, PAX CALIMA

Exhaust air pack, PAX CALIMA

Art. no.: 9302539

Comes complete with a wet-room Pax Calima fan, cold-air damper, 2 wall tube 100 mm and white exterior wall-grate. The exhaust package is intended for mounting directly in the outer wall, and fits walls of thicknesses from 60 to 320 mm. Recommended wall hole measurements, 110 mm.

Fan Intellivent® P

Fan Intellivent® P

Art. no.: 9302544

Fresh Intellivent P is an exhaust fan developed and adapted for the Swedish professional market. The fan has self-adjusting humidity control, removable fan wheel, timer, speed control, built-in all-pole switch, basic flow option and painted front cover. The fan is easy to install and can be easily connected via external cable or via the back of the fan. The fan has also been upgraded in surface finish compared to previous models. Intelligent self-adjusting humidity control, timer, speed control, basic flow, etc. Noise level from 12 dB(A) at 42 m3/h to 29 dB(A) at 134 m3/h.

Fan Intellivent® P

Fan Intellivent® P

Bathroom fan Klimat K7

Bathroom fan Klimat K7

Art. no.: 9302520

Klimat K7 is a Swedish-made multifunction fan with excellent performance, high pressure capacity and low noise level. It is both a bathroom fan, with six selectable ventilation solutions and a heat exchanger.

- Easy to install: Unscrew the wall frame (integrated seals). Connect phase and zero. Clear!
- Easy to select function: Lift the cover. Select mode. Clear!
- Easy to clean: Motor unit with bayonet socket makes the fan easy to disassemble and clean.

Four speeds for optimal ventilation, self-adjusting humidity control, presence sensor movement / light, timer, ventilation function, thermostat, manual start / stop via switch. Self-calibrating motor with built-in cruise control that optimizes the ventilation flow and counteracts cold even when the fan is running at low speed. Negligible energy consumption 3 Watt. Materials with low environmental impact (PP).

All-pole switch Yes
Insulation class Class II must not be earthed
Certificate S - Intertek
Markings CE
Material Polypropylene (low environmental impact)

Connection Hidden or surface mounted
Channel Ø: Ø100 mm (hole making Ø110 mm)
Location Wall or ceiling
Type of motor BLDC
Warranty 5 years

Speed: low, Capacity: 40 m3 / h (11.1 l / s), Pressure; 8Pa, Sound pressure level; 17 dBA @ 3 m
Speed: medium, Capacity: 60 m3 / h (11.1 l / s), Pressure; 16Pa, Sound pressure level; 18 dBA @ 3 m
Speed: high, Capacity: 95 m3 / h (11.1 l / s), Pressure; 35Pa, Sound pressure level; 21 dBA @ 3 m
Speed: max, Capacity: 110 m3 / h (11.1 l / s), Pressure; 48Pa, Sound pressure level; 25 dBA @ 3 m

Cover plate 195x195 for K7

Cover plate 195x195 for K7

Art. no.: 9302527

Cover plate is used when the fan / valve does not cover the duct opening (max. Ø160 mm). Materials with low environmental impact (PP).

Bathroom fan Klimat K7 Pack

Bathroom fan Klimat K7 Pack

Art. no.: 9302578

Complete exhaust air package for mounting in exterior wall. A Bathroom fan Klimat K7, a Wall tube telescope 260-400 mm (can be cut to a shorter length), a Socket and Cold protection, an Exterior wall grille white. The fan is delivered set to optimize air flow completely automatically in three speed modes: - Low speed (continuous basic flow) - Intermediate speed (presence sensor) - High speed (humidity automatic) With the function selector, additional ventilation options can be easily set.
Contains: Bathroom fan Klimat K7, wall tube telescope 260-400 mm, outer wall grille white, socket, cold race protection.

Cover plate Fresh Intellivent ®

Cover plate Fresh Intellivent ®

Art. no.: 9302584

ABS plastic cover plate for mounting where the fan does not hide the duct opening. 242 x 190 mm. Fits all Fresh Intellivent fans.

Cover plate Fresh Intellivent ®

Front panel Intellivent SKY

Front panel Intellivent SKY

Art. no.: 9302587

White design front cover of ABS plastic, with magnets, fits the Intellivent SKY fan.

Bathroom fan Levante 00

Bathroom fan Levante 00

Art. no.: 9302606

Simple fan and good ventilation solution in spaces where the natural draft (roof) is not enough.

Bathroom fan Levante 30

Bathroom fan Levante 30

Art. no.: 9302607

Fan with humidity control and presence sensor, perfect for the bathroom in homes with natural draft.

Bathroom fan Calima black

Bathroom fan Calima black

Art. no.: 9302608

Pax Calima® is a multifunctional fan that is ready to use immediately after electrical connection. In its standard version, Calima works fully automatically on both humidity and light in three speed modes. Possibility of app control and with built-in all-pole switch.

• Humidity and light sensor
• Possibility of app control
• Built-in 12-volt input
• Heat transfer function
• Default on three speed modes

Insect filter standard

Insect filter standard

Art. no.: 9302491

Insect filter standard. Replacement filters for all types of Pax wall valves and supply air packages. Easy assembly.

Showing 21 of 21