Order lines: 0

Ahlsell Products Tools & Machines Power tools and machinesPower tools, mains-operated

Power tools, mains-operated

Do you need power tools for work? Ahlsell helps you find the right power tools for your job. We have electric hand tools for various tasks, whether it is assembly, renovation, or construction. In our range of powerful and durable power tools, you will find everything from screwdrivers, grinders, and circular saws to water pumps and pressure washers as well as accessories such as batteries and battery chargers. Benefit from the power of the tool as you work. Power tools make your work easier and make your work efficient. Explore our wide range of power tools online or visit your nearest Ahlsell store.

Products (490)

Angle Grinder Metabo WEQ 1400-125

Angle Grinder Metabo WEQ 1400-125

Art. no.: 742520

Robust, universal and economical: ergonomic angle grinder for all uses. Powerful engine with good overload resistance. Tacho-Constamatic (TC) full-wave electronics: effective work thanks to constant speed during loading. Toolless, quick disk changeover with one push of a button with the Metabo M-Quick system. Mechanical safety coupling Metabo S-automatic: minimises recoil efficiency to the lowest level on the market if the disc were to block – protects the user optimally and allows them to resume work quickly. Electronic overload protection for long service life. Electronic soft starter and protection against restart. The gear housing can be mounted in 90° steps for use with left hand or for cutting.

Mixer Flex MXE1200

Mixer Flex MXE1200

Art. no.: 757470

Robust and generously dimensioned gear housing for high torque and long service life. Full wave electronics with soft start. Temperature monitoring, overload protection and stepless rocker switch for controlled speed until maximum speed is reached. High traction in all rev ranges. Comfortable 3-speed shifter that can be reached from the grip position without interrupting work, which is splash-protected by a rubber sleeve. Level 1: cleaning. Level 2: stir up. Level 3: mixing. On / off button with lock and protection in case of power failure. Ideal for stationary operation in a mixing station. The flexible rubber cover over the switch prevents dirt from entering. No disturbances due to the switch being stuck. Ergonomically designed handle that is comfortable to hold. Four corner rubber protectors provide safe storage and transport. The protective cover over the motor housing directs the cooling air flow and prevents, for example, the penetration of splashes. Spindle lock with restart protection. Simplifies the replacement of the mixer beater. For different areas of use up to 60 kg. Mixture: Suitable for tile fix, grout, filler, glue, plaster, mortar. Standard equipment: 1 mixer beater WR2 140x600 M14. 1 key SW 22.

Heat Gun Steinel HG 2620E

Heat Gun Steinel HG 2620E

Art. no.: 419788

HG 2620 E is equipped with a brush-less motor with a service life of 10,000 hours; the heating element can easily be replaced and calibrated with plug & play technology. Temperature and airflow have step-less adjustment via an easy-to-use joystick; the selected value is shown in a display on the top of the tool. It is also possible to store up to four different programs for different types of operation. HG 2620 is equipped with an ergonomic soft-grip handle and double overheating protection. The air intake has a fine dust filter that protects the motor and electronics. HG 2620 is intended for use with all of Steinel’s professional nozzles that screw into place. In addition, the HL Scan Pro temperature scanner can be mounted on the HG 2620 E.

Heat Gun Makita HG6031VK

Heat Gun Makita HG6031VK

Art. no.: 542661

Professional heat gun with 2 temperatures and 2 speeds for different heating needs, material removal etc. A large number of nozzles are available as accessories. Maximum flow: 300 – 500 litres/min. Thermal safety switch. IEC Protection class: II. Connection cable: 2.0 m.

Angle Grinder Flex L1400 125

Angle Grinder Flex L1400 125

Art. no.: 721875

Soft start for easy machine start-up. Restart protection in the event of a power failure. Sensor based temperature control prevents the machine from overheating. CDC speed control maintains the speed high during increasing loads. Tool-free adjustable dust cover with clamp lever. Ergonomic side handle positions.

Drill Makita DP4011

Drill Makita DP4011

Art. no.: 416045

Drilling machine with durable metal unit which provides long life. Safety switch protects the user. The ergonomic and rubber-covered handle ensures safe and comfortable work position. Input 725 W.

Reciprocating Saw HiKOKI CR13V2

Reciprocating Saw HiKOKI CR13V2

Art. no.: 506685

Very high saw capacity. Simple and quick blade change without tools. Standard attachment for the saw blade. Rubber coated machine body. Continuously variable speed. Large easily accessible power switch. Light and compact. The saw blade can be mounted with the teeth up or down. Articulated support foot. Supplied with tiger saw blade and storage bag.

Reciprocating Saw Bosch GSA 1300 PCE

Reciprocating Saw Bosch GSA 1300 PCE

Art. no.: 374719

Balanced, anti-vibration handle. 1300W-high output motor with constant electronics for tough jobs. Constant oscillation allows faster sawing. SDS saw blade system provides fast and easy one-handed blade replacement. Constant LED lighting. Saw stop with toolless setting. Suspension hook. Rubberised gearbox provides safe and comfortable grip.
Saw blade metal S 123 XF (2 608 654 416) Craftsman case Saw blade wood S 2345 X (2 608 654 417).

Reciprocating Saw Flex RS11-28

Reciprocating Saw Flex RS11-28

Art. no.: 466902

A powerful tiger saw of 1100W with integrated LED light. The blade can be turned 180 degre for best accessibility in narrow spaces. Standard equipment: 1 x selection of saw blades, 1 x carrying case.

Glue Gun Ironside PRO 450W

Glue Gun Ironside PRO 450W

Art. no.: 505064

Hot melt glue gun for professional use with high efficiency and short heating time, electronic temperature regulation control with energy saving mode and flexible construction. Manual feeding. Hot melt adhesive capacity between 130-230 °C. Materials: technical plastic and metal. Temperature regulation control. Glue output: 1.0-1.5 kg / h. Interchangeable nozzles. Extra nozzle 1 pc.

Drill bosch

Art. no.: 308922

Compact design and low weight makes for easy handling in serial drilling. Practical belt clips. Stored chuck yields high accuracy. Control electronics for precise drilling site location. Right / left running.

Glue gun GM 3011

Glue gun GM 3011

Art. no.: 71087751

Rotary Brush PELA

Rotary Brush PELA

Art. no.: 36116214

Sheet Metal Shear Dräco SD5-1

Sheet Metal Shear Dräco SD5-1

Art. no.: 66882200

Glue Gun Ironside PRO 220W

Glue Gun Ironside PRO 220W

Art. no.: 505063

Hot melt glue gun with adjustable regulation of the temperature and mechanical advance of the glue stick. With a high melting temperature (120-220 degrees), which means that the glue flows out better and the adhesion increases. For gluing wood, paper, cardboard, cable, cable ducts, boxes, etc. Materials: ABS and fiberglass. Temperature adjustable control. Glue output: 0.7-1.2 kg / h. Interchangeable nozzles. Glue output: 1000 g / h. Extra nozzle 1pc.

Sheet Metal Shear Dräco 1016-1

Sheet Metal Shear Dräco 1016-1

Art. no.: 66882231

Shear Makita JS1601

Shear Makita JS1601

Art. no.: 354166

Quick, straight and inclined cutting in metal. Easy and simple to handle; 1.4kg. Minimum curve radius 250mm. The cut material is removed through the middle of the line as a band and doesn’t make a mess of your environment. Supplied with tool key, side cutter 792533-6, Straight shear 792534-4.

Shear Makita JS1601

Polishing Pad Festool STF

Polishing Pad Festool STF

Art. no.: 714924

Jigsaw HiKOKI CJ110MVA

Jigsaw HiKOKI CJ110MVA

Art. no.: 506687

Very compact and well balanced with strong motor and high sawing capacity. Ergonomic rubberized grip for good and safe comfort. Standard blade attachment. Simple and quick blade change without tools. Electronic speed regulation in 5 steps and constant power control. 4 pendulum settings. Integrated LED light. Strong saw table in cast aluminium. Transparent protection at the front. Effective chip blower and good placement of extraction adapter (included). Supplied with jigsaw blade, splinter guard, extraction adapter, key and storage bag.

Angle Grinder Milwaukee AGV 15-125 XC

Angle Grinder Milwaukee AGV 15-125 XC

Art. no.: 457428

125mm bolt cutter with 1550W motor. Overload protection, soft start, constant rpm speed, protection against kick-back effect and line lockout function. vibrated support handle. protective jacket with snap lock. Spindle lock. Integrated FIXTEC for quick tool-free replacement of disc . 4m cable, protective cover, side handle, flange washer, and FIXTEC nut.

Angle Grinder Bosch GWS 7-125

Angle Grinder Bosch GWS 7-125

Art. no.: 469168

Smoother handle (176 mm), as compared to other angle grinders in the W-class, providing smooth and easy operation. Flat gearbox, provides smooth operation even in confined spaces. Vibration-proof kickback guard provides great user protection. Powerful 720 W continuous-use motor, only 1.9 kg. Custom air intake give optimal motor cooling and long life.

Reduction nozzle 5 mm Steinel

Reduction nozzle 5 mm Steinel

Art. no.: 419791

Nozzle for point-directed heating, 5 mm opening. Fits to HG 2620E and HG 2420E.

Heat gun Bosch GHG 20-60

Heat gun Bosch GHG 20-60

Art. no.: 650859

Precision work thanks to adjustable airflow and temperature range. Perfect for tasks requiring temperatures up to 630°C. All working positions are possible due to its straight form. Delivered in a carton.

Sander Bosch GGS 8 CE

Sander Bosch GGS 8 CE

Art. no.: 58004004

Sander Bosch GGS 8 CE

Heat Gun EHG2000

Heat Gun EHG2000

Art. no.: 72298559

Hot Air Gun Metabo HGS 22-630 with metaBOX 145

Hot Air Gun Metabo HGS 22-630 with metaBOX 145

Art. no.: 758716

Practical rod shape for a comfortable working position, e.g., for flooring work. Versatile heat gun with adjustment dial for easy, stepless temperature control. High-quality ceramic element, efficient motor, and optimal machine cooling for long service life. High work safety thanks to the narrow, rubberized handle and secure stop option. Suitable nozzles for paint stripping, shaping, shrinking, welding, and much more (accessories). Wide range of applications: paint stripping, shaping, shrinking, welding, and much more. Delivered with slit nozzle, welding nozzle, reducer nozzle (9 mm), and metaBOX 145.

Rotary Hammer Bosch GBH 3-28 DFR

Rotary Hammer Bosch GBH 3-28 DFR

Art. no.: 308925

High drilling rate and very high chiselling capacity. low vibrations thanks to Bosch Vibration Control. Replacement chuck provides fast changes between stroke drilling in concrete and drilling without stroke generator in wood and metal.

Angle Grinder Hitachi G23ST

Angle Grinder Hitachi G23ST

Art. no.: 506680

Compact and easy to operate angle grinder. Ergonomic, angled side handle, can be placed on the right or left side. With overload protection. Burst-protection with quick-locking buckle. Spindle lock for easy disc replacement. Supplied with support handle and hook wrench.

Multitool Dremel 3000-15

Multitool Dremel 3000-15

Art. no.: 543661

The set includes a Dremel 3000 multi-tool and 15 unique accessories in a convenient case. This equipment is perfect for DIY projects.

Knife to Supercut FEIN Angled

Knife to Supercut FEIN Angled

Art. no.: 354232

Z-bend, long, for deep joints. Length 120 mm.

Heat Gun DEWALT D26414

Heat Gun DEWALT D26414

Art. no.: 473755

Powerful heat gun for professional users with a temperature control featuring a memory function for consistent temperature requirements. 2000 W motor with optimal cooling. Small and handy for easy handling. Air temperature range (at the nozzle): 50-400 and 50-600 ºC. Included accessories: 1 piece Conical nozzle, 1 piece Wide nozzle.

Heatgun Flex Hg650 2000 230V 50/650° 250/500 L/MIN

Heatgun Flex Hg650 2000 230V 50/650° 250/500 L/MIN

Art. no.: 74699327

Belt EBS800

Art. no.: 72298531

Temperature scanner Steinel

Temperature scanner Steinel

Art. no.: 1638249

HL Scan is an accessory for temperature monitoring of the surface of a workpiece during hot-air pistol use. When the set temperature is exceeded, HL Scan provides both a visual and an auditory warning. The alarm is triggered as soon as the actual temperature is greater or less than the set-point. The warning tolerance can be set individually. HL Scan measures the temperatures of various surfaces without contact. To achieve an exact measurement result for various materials and surfaces, the emission value can be set. HL Scan can be used with hot-air pistols HL 1920 E, 2020 E, HG 2120 E, and HG 2320 E.

Angle Grinder Makita GA5040CF01

Angle Grinder Makita GA5040CF01

Art. no.: 400929

Angle grinder with AVT side handle and new SJS2 ("Super Joint System II") for effective vibration absorption. The machine is equipped with a “Super Flange" attachment plate, allowing disc changing without tools, and with soft startup for safety.

Angle Grinder Makita GA5030R

Angle Grinder Makita GA5030R

Art. no.: 465683

Ultra-compact angle grinder with a circumference of only 180 mm. The two maze channels of the engine house protect the anchor and windings against pollution that comes with cooling air. Equipped with restart protection. Ultra-compact angle grinder, circumference only 180 mm. The two maze channels of the engine house protect the anchor and windings against pollution that comes with cooling air.

Angle Grinder Bosch GWX 19-125 S

Angle Grinder Bosch GWX 19-125 S

Art. no.: 569238

GWX 19-125 S Professional small angle grinder with X-LOCK and speed selection is a powerful small angle grinder in the 1900W class. Its powerful 1 900 W engine, with constant electronics and speed selection, provides an efficient working result. This small angle grinder comes with a keyless X-LOCK click system that provides quick and comfortable accessories replacements. KickBack Control and a Vibration Control handle provide increased user protection. This tool is intended for cutting and grinding metal, tiles and bricks.

Hand router Hikoki M12V2

Hand router Hikoki M12V2

Art. no.: 648966

Router Dewalt D26204K

Router Dewalt D26204K

Art. no.: 354203

Electronically-controlled speed control, which keeps the rotational speed constant, always gives the best finish for all materials such as wood, aluminium and plastic. Variable speed control 16000 to 27000. Compact, light construction. Motor house in aluminium and base construction. Adjustable table with double-handed grip and depth adjustment. 5 set depth modes. Supplied with 2 parallel guides, 2 dust extractor adapters, 8 mm clamp tong, 17 mm open-ended key, 2 tables - 1 fixed and 1 adjustable.

Multi Grinder Metabo FMS 200 INTEC

Multi Grinder Metabo FMS 200 INTEC

Art. no.: 758495

Triangular grinding wheel for grinding edges, corners and even surfaces. Light and practical machine for easy single-handed use. Very good ratio between weight and effect for less strenuous work. Handle with slip-proof Softgrip surface. Dust cartridge with filter for working without the connection of an exhaust. Possibility of connecting an all-vacuum with an adapter (accessory). Comes with dust cassette, 1 pleated filter and plastic box.

Parallel Guide Festool PA-TS 55

Parallel Guide Festool PA-TS 55

Art. no.: 714804

Angle Grinder Dewalt DWE4237

Angle Grinder Dewalt DWE4237

Art. no.: 456513

The 125 mm Angle grinder with slide switch. Created by DeWALT with restart protection, dust extraction and heavy-duty work in mind. The soft start reduces the power when turning on the machine, to give the user more control. The shift switch prevents the grinder from starting unexpectedly when connected to the mains power supply. The DeWALT Angle Grinder small body contour makes it easy to use and allows you more control with anti-blocking flanges to prevent jamming. The new design of the protective cover also means you can remove or adjust the shield without a key.

Hot Air Gun Rapid R2200-E

Hot Air Gun Rapid R2200-E

Art. no.: 816096

Hot Air Gun R2200 is suitable for tasks such as paint stripping, soft soldering, or car wrapping. With a power of 2200W and a ceramic heating element, the R2200-E combines high performance with the latest innovative features. These include a residual heat indicator for safer handling after use and LED lights that guide the settings for airflow and temperature. The R2200-E also has a short heating time that increases work efficiency, and its working temperature can vary between 60°C and 650°C. Airflow: 250-500 l/min. 3 airflow settings. Delivered in a box.

Angle Grinder Milwaukee AG 800-125 E

Angle Grinder Milwaukee AG 800-125 E

Art. no.: 476264

Powerful 800 Watt motor for various applications with only 2.0 kg of weight for comfortable use during longer working periods.
-Very compact and slim body grip design with only 194 mm for most comfortable handling.
-Line lock out function to prevent automatic start up after power breakdown.
-Soft start for smooth start up.
-Durable steel gears for long life time.
-Protected air inlets for improved cooling.
-Flat metal gear head for excellent visibility of workpiece, optimised cutting depth and work in restricted areas.

Heat gun DEWALT 1800W D26411

Heat gun DEWALT 1800W D26411

Art. no.: 11686302

Heat gun DEWALT 1800W D26411

Concrete Grinder Bosch GBR15CAG

Concrete Grinder Bosch GBR15CAG

Art. no.: 400796

Powerful 1 500 W-motor for high felling. Edge-close sanding: mobile blast protection part for sanding directly on floor edges, walls and ceilings. Click & Clean-dust outlet.

Concrete grinder HiKOKI GM13Y with grinding disc

Concrete grinder HiKOKI GM13Y with grinding disc

Art. no.: 764764

Reciprocating Saw Makita JR3070CT

Reciprocating Saw Makita JR3070CT

Art. no.: 354124

Strong Sabre saw with 1510W power and an impact length of 32mm. The saw is equipped with a pendulum motion which can be set at three levels and AVT (Anti-Vibration Technology) for dampened vibrations. Tool free blade change and base adjustment simplifies the job.

Mixer Ironside MX1600

Mixer Ironside MX1600

Art. no.: 716053

Robust and generously dimensioned gear housing for high torque and long service life. Soft start. Temperature monitoring, overload protection and stepless rocker switch for controlled speed until maximum speed is reached. High traction in all rev ranges. Comfortable 2-stage shifter that can be reached from the grip position without interrupting work, which is splash-protected by a rubber sleeve On / off button with lock and protection in case of power failure. Ideal for stationary operation in a mixing station. The flexible rubber cover over the switch prevents dirt from entering. No disturbances due to the switch being stuck. Ergonomically designed handle that is comfortable to hold. Four corner rubber protectors provide safe storage and transport.. Spindle lock with restart protection. Simplifies the replacement of the mixer beater. For different areas of use up to 80 L / 120L.. Mixture: Suitable for tile fix, grout, filler, glue, plaster, mortar. Standard equipment: 1 mixer beater WR2 140x600 M14 and spanner SW 22.

Stirrer Bosch GRW 12/18

Stirrer Bosch GRW 12/18

Art. no.: 322763

Angle Grinder Flex L2200 230

Angle Grinder Flex L2200 230

Art. no.: 742780

Powerful engine and gearbox housing. The stable and robust gearbox and the metal-encapsulated spider bearing provide increased reliability and durability. The rear handle is rubber coated for safer grip. Power switch with latch button and spindle lock. Backout lock out in the event of a power outage. Soft start for a comfortable start. Spinning lock. Tool-free adjustable protective cover with clamp. Standard equipment: 1 Bursting protection 230 Ø. 1 handle. 1 tensioning plate. 1 tension nut M 14. 1 wrench.

Glue Gun Steinel Gluematic 5000

Glue Gun Steinel Gluematic 5000

Art. no.: 1647376

Cordless electronically controlled adhesive gun with very high melt effect for bonding. Rechargeable adhesive gun with constant and high adhesive capacity. Equipped with an electronically controlled dual heating system that provides high gluing capability and rapid heating. 3 minutes heat-up time. For bonding of wood, heated floors, cardboard, cables, cabling ducts, boxes, etc. The holder serves as a charging station. Replaceable nozzles. Comes with charging station, 2 nozzles and 3 superglue rods. 11 mm glue rod. Melt temperature: 210-220 degrees. Flow-rate (Max) 22 g / min. 2-PCT heating technology. Mechanical feed. Non-drip nozzle.

Showing 52 of 490