Order lines: 0

Ahlsell Products Tools & Machines Hand toolsCutters

Cutters

Metal and shaping cutters

Bolt, wire and cable cutters

Threaded rod cutter

With good hand tools, you work more efficiently and get a better result. Ahlsell helps you find the hand tools for your job. We have hand tools for many different tasks. Our range of hand tools includes everything from hammers, wrenches, and jigsaws to scissors. You will also find pliers and complete tool sets. With hand tools, you also don't have to worry about charging batteries and electronics that break. Explore our wide range of hand tools online or visit your nearest Ahlsell store

Products (87)

Multi Angle Scissor Ironside

Multi Angle Scissor Ironside

Art. no.: 79222900

Cable duct cutter from Ironside with an angle-adjustable head for cutting cable ducts at various angles. Ergonomic handle provides a stable grip. The tool weighs 400 grams.

Electrician scissors ironside

Electrician scissors ironside

Art. no.: 283422

Grooved, precision-tempered cutter made from stainless steel. Intended for soft copper and aluminum cables, tape, cable ties, etc. Cutting length 42 mm. Total length 138 mm. Two-component handle. Comes with a textile belt holster.

Aviation snip ironside long

Aviation snip ironside long

Art. no.: 298169

Induction-tempered HRC 60-62. Straight design with gearing. For up to 1.0mm steel sheet and 0.5mm stainless sheet. Lightly serrated cutters of molybdenum steel. 2-component handle.

Bolt Cutter Ironside Foldable

Bolt Cutter Ironside Foldable

Art. no.: 72018653

Bolt Cutter Ironside Foldable

Pipe cutter RC

Art. no.: 1621358

Toothed pipe cutter for Al and Cu cable. Replaceable shears. Can handle steel reinforcement. Tooth cleaner in the handle.

Cable cutter knipex

Cable cutter knipex

Art. no.: 1781050

Lightweight and easy-to-use cable scissors with long shanks for bundled copper and aluminum cables up to 20 mm. Max 70mm². With double shears providing a straight and even cutting surface.

Cable cutter knipex

Cable Cutter Nemiq Kcc-22

Cable Cutter Nemiq Kcc-22

Art. no.: 71616768

Cable Cutter Nemiq CCS 22

Cable Cutter Nemiq CCS 22

Art. no.: 71616774

Cable Cutter CC 60

Cable Cutter CC 60

Art. no.: 71616780

Cable cutter with double jaws, which cuts and strips copper and aluminum cables. Fully forged in carbon steel with polished/hardened jaws.

Bolt Cutters Ironside

Bolt Cutters Ironside

Art. no.: 384978

Strong bolt cutter with hardened cutters and exchange. Tubular handles fitted with rubber grips. Manages most material, but not spring steel or extra tempered reinforced steel. Silver-coloured jaws with long-life tempering.

Bolt Cutters Ironside

Tailer Scissors

Tailer Scissors

Art. no.: 81253099

Ergonomic design, supportive handle for a good grip. Long blades for easy cutting. Blade pressure is adjustable with the screw. Also for cutting insulation mats, etc.

Tailer Scissors

Universal Scissors Fiskars Classic

Universal Scissors Fiskars Classic

Art. no.: 81253081

The cutting blades are made of stainless steel and are designed to cut materials of varying thickness. The blade tension is adjustable to tailor the scissors' function according to needs. The handles are made of plastic and have an ergonomic shape that provides a stable grip. The scissors are dishwasher safe.

Universal Scissors Fiskars Classic

Universal Scissors Fiskars Classic

Paper Scissors Fiskars Classic

Paper Scissors Fiskars Classic

Art. no.: 81253109

New in the online store

Scissor Fiskars Amplify

Scissor Fiskars Amplify

Art. no.: 811149

The 24 cm Amplify scissors are designed for professional users who require stable and precise cutting in resistant materials. The scissors are suitable for leather, sailcloth, carpets, canvas and upholstery, and are used in construction, industry, installation, workshops and service applications. The serrated cutting edge improves control during cutting of smooth or dense materials and provides a secure grip throughout the cut.
Amplify technology is engineered to reduce blade separation when cutting through thick materials. The floating blade tang transfers force to a torsion spring that adjusts the blade angle under load. This supports stable cutting even when the material varies in density or structure. The blades are made of stainless steel with a precisely ground edge for consistent cutting along the full length.
The handle is shaped to follow the natural movement of the hand and support a neutral grip during extended use. The thumb and finger loops are ergonomically formed and feature a SoftGrip contact surface that improves stability and reduces pressure on the hand. The balanced construction provides accurate handling for professional users who need controlled cutting in materials that require high force transfer.
With a width of 90 mm, a length of 240 mm and a weight of 191 g, the scissors are designed to provide a balance of strength, control and maneuverability in demanding tasks.

Cable Cutter Ironside 45mm Step-fed

Cable Cutter Ironside 45mm Step-fed

Art. no.: 55922619

Cable Cutter Ironside 45mm Step-fed

Templates HIT

Art. no.: 1779125

Templates for burr-free cutting of zinc-galvanised threaded rods in grades 4.6, 5.8 and 8.8. Suitable for threaded rod cutter HIT.

Cable Cutter Knipex 9532 -320

Cable Cutter Knipex 9532 -320

Art. no.: 1662227

Handy. Compact. Sturdy. Cuts through aluminium conductor cable with steel core up to a diameter of 32 mm in one or two-handed operation. Cutters with precision cut and induction-hardened cutting edge
Two-stage ratchet drive for easy cutting. Less physical effort due to very high transmission ratio
Fixed handle with support area for putting down the pliers when cutting. Locking mechanism for transporting with safely closed handles. Special high grade tool steel, multi stage oil-hardened

Cable Cutter Knipex 9532 -320

Bolt Cutter Ironside Reinforcement

Bolt Cutter Ironside Reinforcement

Art. no.: 34949147

THREADED ROD CUTTER HIT

THREADED ROD CUTTER HIT

Art. no.: 1779120V

Threaded rod cupboard for plain cutting of galvanized threaded rods, with double cutting options as standard. Two openings with shears means you do not need to replace shears when switching between M8 and M10-cutting, for example. Comes with a holder that can be attached to a chuck key or screwed tightly into the base, and shears for M8 and M10. Can also be used with shears for M6. Total shank length 740 mm. Weight 4.1 kg. Spare parts basket for template article no. 118857 M5x10.

Scissors ironside 243mm

Scissors ironside 243mm

Art. no.: 283444

Stainless steel. Slightly serrated shears for better grip. Ergonomic handle design made from plastic.

scissors

Art. no.: 174710

Strong shears for clipping insulating mats, towels made of various materials, etc. Carbon steel, drop-forged Adjustable screw Cutting length 115 mm. Total length 255 mm.

Spare cutter for Ironside bultsax

Spare cutter for Ironside bultsax

Art. no.: 384981

Manages most material, but not spring steel or extra tempered reinforced steel. Silver-coloured jaws with long-life tempering.

Spare cutter for Ironside bultsax

Household scissor

Household scissor

Art. no.: 288178

Carbon steel, annealed and nickel-plated

Scissors Milwaukee Angled

Scissors Milwaukee Angled

Art. no.: 773002

Scissors Milwaukee Angled

Cable Shears CC 22

Cable Shears CC 22

Art. no.: 1621360

With double jaws that cut and strip copper and aluminium cables. Fully forged in coal steel with polished / hardened jaws. Anti-slip soft grip handle. Cutting capacity multi-wire / solid cable as well as stripping: 10 mm/8 mm, 50 mm²/35 mm², 0.2-35 mm². Length 162 mm.

shears Midwest 6510

shears Midwest 6510

Art. no.: 404630

With interchange. Thanks to the design of the blades and the angle between the blade and handle, the hand is kept above the sheet metal during cutting. The scissors have an interchange, slightly serrated blades and are intended for sheet metal up to 2.5 mm thick. The shanks are made from stamped sheet steel with a plastic handle.

shears Midwest 6510

Hobby Scissors Fiskars Classic

Hobby Scissors Fiskars Classic

Art. no.: 81253113

Shears Midwest SSP-6716

Shears Midwest SSP-6716

Art. no.: 404629

With interchange for stainless sheet. Intended for stainless steel sheet. Stays sharp for a longer time. Specially-tempered blades for maximum load. The shanks are made from stamped sheet steel with a plastic handle.
With spring and lever lock.

Shears Midwest SSP-6716

Stopper scissors/spiro scissors

Stopper scissors/spiro scissors

Art. no.: 19000160

For clean cutting of protruding flanges. Gap depth = 65 mm.

Aviation snip ironside bulldog

Aviation snip ironside bulldog

Art. no.: 298168

Induction-tempered HRC 58-60. Straight design with gearing. For up to 1.6mm steel sheet and 1.2mm stainless sheet. Lightly serrated cutters of molybdenum steel. 2-component handle.

Linesman’s pliers D2000

Linesman’s pliers D2000

Art. no.: 1616802

Combination pliers with extra cutting strength for hard wire.

Cable Shears a-collection

Cable Shears a-collection

Art. no.: 19000125

For multi-wire copper conductors. With scooped shears for peeling. Providing a clean and even cutting surface. Plastic insulated handle. 1900 0125 cutter max 38 mm² (solid copper up to 22 mm²). 1900 0126 cutter max 80 mm² (solid copper up to 30 mm²).

Mitre Shears

Art. no.: 160282

For miter 45°. Shears made from steel. With built-in spring and lever lock. For maximum border edge 25 mm.

Multi scissors ironside

Multi scissors ironside

Art. no.: 280429

Cuts most materials with slightly serrated blades of stainless steel. Ergonomically shaped shanks made of two component materials. Comes with wire/cord cutter and makes it possible to adjust the gap width to the hand size. Cutting length 50 mm. Total length 205 mm.

Multi scissors erdi 50

Multi scissors erdi 50

Art. no.: 231109

Shears made from stainless quick steel, comes with a hutch for cords. Ergonomically shaped shanks made of two component materials. Return spring. Locking device. Cutter 0.6 mm copper sheet, 1.5 mm² copper cable. Strips 1.0 and 1.5 mm cable.

Goldsmith’s scissors

Goldsmith’s scissors

Art. no.: 284984

Induction tempered. For cutting thin copper sheet. Erdi 72 with straight shears. Erdi 73 with bent shears.

Band Iron Shears

Band Iron Shears

Art. no.: 101076

Induction tempered to HRC 56-60. Smooth shears. Cutting length 35 mm. Plastic coated flaps For cutting hoop iron, thin sheets, etc.

Hand plate cutter Erdi D202

Hand plate cutter Erdi D202

Art. no.: 101071

For stainless steel sheet. Hardened to HRC 58-60. Smooth shears. Open shanks.

Tin snip Bacho 583D anf 584D

Tin snip Bacho 583D anf 584D

Art. no.: 117610

Straight and right and left respectively cut Smitt, precision-tempered tool steel. Serrated upper shear. Open shanks. Cutting capacity 0.6 mm stainless sheet metal, 1.2 mm iron and galvanized sheet metal, 2.0 mm copper and brass sheet.

Tin snip Bacho 583D anf 584D

Tin snip Bacho 583D anf 584D

Aviation snip erdi 216b

Aviation snip erdi 216b

Art. no.: 230958

Induction tempered to HRC 58-62. Black shears. For iron sheet metal up to 1.5 mm and stainless sheet metal up to 1.0 mm. Plastic dipped flaps

Tin snip Erdi D22A

Tin snip Erdi D22A

Art. no.: 267775

Universal plate scissors with long shears, 75 mm. With interchange. Ergonomically shaped shanks made of two component materials. Cuts sheet steel, mesh, floor mats, rubber, etc. Cutting capacity steel plate 1.0 mm, copper plate 1.2 mm.

Roof tin scissors

Roof tin scissors

Art. no.: 101081

Induction tempered to HRC 56-60. Multipurpose scissors. Smooth shears. Cutting length 63 mm. Open shanks. Capacity 1.2 mm.

Aviation snip ironside 250mm

Aviation snip ironside 250mm

Art. no.: 263452

Induction-tempered HRC 60-62. With interchange. Lightly serrated cutters of molybdenum steel. For up to 1.2 mm sheet steel. 2-component handle.

Aviation snip ironside 250mm

Aviation snip ironside 250mm

Aviation snip wiss

Aviation snip wiss

Art. no.: 270007

Induction-tempered HRC 56-60. With interchange. Lightly serrated cutters of molybdenum steel. For up to 1.5 mm sheet metal. Shanks of stamped sheet steel with plastic handle. With spring and lever lock.

Bolt cutters bahco 4559

Bolt cutters bahco 4559

Art. no.: 251414

Made of forged, high-quality, black oxide, rust-protected steel. Cutting capacity up to 15 mm reinforced iron or 9 mm valve spring steel. Size 18 to 36 mm has easily adjustable blades through a simple, patented system. Without external parts being damaged or deformed. High cutting power right from the start of the cut. Good access in confined spaces. Comfortable handle.

Bolt cutters bahco 4559

Wire scissor Knipex 9561

Wire scissor Knipex 9561

Art. no.: 194623

Plastic coated flaps Return spring. Provides a smooth cutting surface. With 2 count swages for end sockets. For cutting wire and steel cable. Cutting capacity 6 mm steel wire and 2.5 mm piano wire.

Wire scissor Knipex 9561

Cable cutter knipex 9512-500

Cable cutter knipex 9512-500

Art. no.: 298143

Easy-to-use cable scissors with long shanks for bundled copper and aluminum cables up to 27 mm. Max 150 mm². With shears providing a straight and even cutting surface. Grip of two-component material.

Cable cutter knipex 9512-500

Cable cutter bahco 2520

Cable cutter bahco 2520

Art. no.: 119841

Black oxide, rust-protected special steel. For cutting telephone cable with or without supporting cable with maximum diameter 30 mm on the cable and 6 mm on the supporting cable. With pedal stops. Plastic handles.

Cable cutter bahco 2520

Cable Shears knipex 9511-165A

Cable Shears knipex 9511-165A

Art. no.: 284994

Polished head. Both cuts and strips copper and aluminum cables. One-hand operation with pinch protection. Screw joint with the possibility of readjustment. Plastic-coated handles.

Cable cutter ironside 160mm

Cable cutter ironside 160mm

Art. no.: 266040

For bundled copper conductors. With scooped shears for peeling. Providing a clean and even cutting surface. Plastic insulated handle. 266040 cutter max 38 mm² (solid copper up to 22 mm²). 266041 cutter max 80mm² (solid copper up to 30 mm²). 266042 cutter max 90 mm² (solid copper up to 38 mm²).

Cable Shears a-collection 240mm

Cable Shears a-collection 240mm

Art. no.: 19000127

Very high quality, professional tool. Small, easy-to-use cable scissors with high capacity. Cuts maximum up to 90 mm² (solid copper up to 38 mm²).

Cable Shears a-collection 240mm

Cable cutter knipex 9531

Cable cutter knipex 9531

Art. no.: 129599

Browned. One-handed use. Lockstep principle. Comfort handle. For copper and aluminium cables. 129599, maximum cable diameter 32 mm, maximum cable area 240 mm². 252485, maximum cable diameter 52 mm, maximum cable area 380 mm².

Cable cutter knipex 9531

Cable cutter knipex 9531

Showing 52 of 87