Order lines: 0

Ahlsell Products Tools & MachinesHand tools

Hand tools

With good hand tools, you work more efficiently and get a better result. Ahlsell helps you find the hand tools for your job. We have hand tools for many different tasks. Our range of hand tools includes everything from hammers, wrenches, and jigsaws to scissors. You will also find pliers and complete tool sets. With hand tools, you also don't have to worry about charging batteries and electronics that break. Explore our wide range of hand tools online or visit your nearest Ahlsell store

Products (2071)

Allen key set ironside 9pcs

Allen key set ironside 9pcs

Art. no.: 248740

Set containing 9 count long wrenches with ball, 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm. Comes in flexible plastic holder.

Bolt extractor kit, external Ironside

Bolt extractor kit, external Ironside

Art. no.: 284977

Bolt and screw extractor in 10 parts for disassembly of stripped, twisted bolts and screws. Also for use on most types of lock bolts, where the original tool is not available. Made from special tool steel. Conical left-oriented and full-length sockets suitable for use for nuts on threaded rods etc. 1/2" - 10,11,12,13,14,15,16,17,19 mm and extractor. Comes in practical sheet metal box.

Bit set Wera Kraftform Kompakt 70 Universal

Bit set Wera Kraftform Kompakt 70 Universal

Art. no.: 75037680

32‑piece set with 816 R Kraftform handle featuring Rapidaptor quick‑release chuck and multi‑component Kraftform handle for fatigue‑free work. Universal Rapidaptor holder with strong permanent magnet that also holds large and heavy screws. Delivered in a robust textile box, suitable for Wera 2go.

Includes:

816 R Bit Handle with Rapidaptor Quick‑Release Chuck: 1× 1/4" × 119 mm
889/4/1 K Rapidaptor Universal Holder:** 1× 1/4" × 50 mm
851/1 TZ Bits: 3× PH 1×25 mm, 3× PH 2×25 mm, 3× PH 3×25 mm
855/1 TZ Bits: 3× PZ 1×25 mm, 3× PZ 2×25 mm, 3× PZ 3×25 mm
867/1 Z TORX® BO Bits with Hole: 1× TX 10×25 mm, 1× TX 15×25 mm, 1× TX 20×25 mm, 1× TX 25×25 mm, 1× TX 30×25 mm, 1× TX 40×25 mm
840/1 Z Bits: 1× HEX 4×25 mm, 1× HEX 5×25 mm, 1× HEX 6×25 mm
800/1 TZ Bits: 1× 0.6×4.5×25 mm, 1× 1×5.5×25 mm, 1× 1.2×6.5×25 mm
9478 Textile Box Kraftform Kompakt 70/71
Hook‑and‑Loop Strip 120: 1× 120×50 mm

Bolt extractor kit, internal Ironside

Bolt extractor kit, internal Ironside

Art. no.: 284976

Bolt and screw extractor in 8 parts for disassembly of stripped, twisted Inset or Torx bolts and screws. Also for use on extracted bolts through a hole 0.5 - 1 mm greater than the head is drilled. Made from special tool steel. Conical left-oriented heads. Long design for best access. 3/8" - 2,3,4,6 mm. 1/2" - 8,10,12,14 mm. Comes in practical sheet metal box.

Sledgehammer Ironside fiberglass

Sledgehammer Ironside fiberglass

Art. no.: 70112356

With hardened square impact on both ends. DIN 6475. Fiberglass shaft with 2-component grip made of PP+TPE Class A.
Head dimensions:
70112354: 150x62x62mm
70112356: 160x68x68mm

Impact socket ironside 1/2"

Impact socket ironside 1/2"

Art. no.: 273188

½". Black oxidized power sockets made from chromium-vanadium steel with hexagonal grip opening. 10 power sockets come in sheet metal with 2 count hole rings and one lock pin.
Contents:
10 count Power sockets 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm

Nut driver set Ironside dual impact

Nut driver set Ironside dual impact

Art. no.: 899550

Set of 3 reversible sockets with dual sizes: 8-10mm / 10-13mm and 1/4-5/16", along with 3 magnetic holders that can be easily cleaned of metal shavings, etc.
The holder features a 1/4" connection for direct attachment to the machine. Total length 65 mm. Supplied in a plastic case with two-tone EVA insert.

Magnet socket kit leaded

Magnet socket kit leaded

Art. no.: 365225

Kit with conductive and phosphated hexagonal power sockets with recessed magnets and 1/4" bracket in the six most common sizes: 1/4", 3/8", 7, 8, 10 and 13mm. Perfect for use with power tools in tight spaces. Handles forces up to 400kg / cm (straight) and 250kg / cm (angled) respectively. Delivered in a practical steel plate storage box.

Power Socket Set Ironside Thin-Walled

Power Socket Set Ironside Thin-Walled

Art. no.: 569067

Masonry Hammer Ironside Fiberglass

Masonry Hammer Ironside Fiberglass

Art. no.: 59082739

Safety Knife Ironside Auto

Safety Knife Ironside Auto

Art. no.: 72686879

Screw Extractor Set Ironside Spiral

Screw Extractor Set Ironside Spiral

Art. no.: 720721

Bit set Ironside 72 pcs

Bit set Ironside 72 pcs

Art. no.: 70923097

Cable Shears CC 22

Cable Shears CC 22

Art. no.: 1621360

With double jaws that cut and strip copper and aluminium cables. Fully forged in coal steel with polished / hardened jaws. Anti-slip soft grip handle. Cutting capacity multi-wire / solid cable as well as stripping: 10 mm/8 mm, 50 mm²/35 mm², 0.2-35 mm². Length 162 mm.

Neodymium Grip Magnet Recessed Hole

Neodymium Grip Magnet Recessed Hole

Art. no.: 72822165

Crimping tool CrimpXChange

Crimping tool CrimpXChange

Art. no.: 1630300E

Very high quality crimping tool with 3 sets of crimping jaws for the most common contact crimping. The crimping jaws that are not in use at the moment are located in the handles and can be changed quickly and easily with release buttons on the front of the tool.

CrimpXChange is a ratcheting pliers that ensures that the crimp is completed.

Torque wrench ironside

Torque wrench ironside

Art. no.: 257759

Click-Type Torque Wrench for Clockwise Torque Application with Preset Torque
Features easy micrometer adjustment of the desired torque with a Newton meter scale.
A distinct clicking sound signals when the preset torque is reached.
Accuracy: ±4%, in accordance with ISO 6879:2017. Operating temperature: -10°C to +60°C. Each torque wrench is delivered in a durable, impact-resistant plastic case, accompanied by a factory certificate confirming that the product has been tested and approved during manufacturing in accordance with specifications.

Screwdriver wera 165si f

Screwdriver wera 165si f

Art. no.: 273182

For special screw with combined track/Pozidriv head. Used for example on electrical outlets, switches, circuit breakers, contacts, etc. Easy-grip handle – Strong shape. With insulation while working with voltage up to 1000 V. EN60900.

Multi-Tool Ironside Mini

Multi-Tool Ironside Mini

Art. no.: 762250

Cutting tool Knipex 1695 ErgoStrip

Cutting tool Knipex 1695 ErgoStrip

Art. no.: 468757

KNIPEX ErgoStrip universal stripping Tool for fast and precise deinsulation and stripping of all conventional round cables and moisture proof cables (eg NYM cable 3 x 1.5 mm² to 5 x 2.5 mm²), data cables (eg pair wired cables) and coaxial cables. Innovative, ergonomically designed gun handle for easier cutting, pulling and longitudinal cutting of the jacket. Conically tapered tool ends for better accessibility where there is a lack of space. Deinsulation order for areas 0.2 / 0.3 / 0.8 / 1.5 / 2.5 / 4 mm². Deinsulation value round cable: 8 - 13 Ø mm. Deinsulation value coaxial cable: 4.8 - 7.5 Ø mm. Easier to put in the individual wire for insulation removal, thanks to positioning life. Coaxial and data cables can be placed comfortably thanks to the opening aid. Multi-component design with zone in soft plastic for comfortable handling and safe grip. Cover made of stable, glass fibre reinforced plastic.

Cutting tool Knipex 1695 ErgoStrip

Drive Socket Set Ironside 1/4", 3/8", 1/2"148 pieces

Drive Socket Set Ironside 1/4", 3/8", 1/2"148 pieces

Art. no.: 742803

Screw extractor set bahco

Screw extractor set bahco

Art. no.: 217944

Length: 3.2 / 4.8 / 6.4 / 8 / 8.7 mm

Screwdriving kit Ironside

Screwdriving kit Ironside

Art. no.: 553691

Allen key set bondhus

Allen key set bondhus

Art. no.: 260581

Patented holder. Wrenches with ball attachment in the long end with recessed plastic plug on the ball side which holds the screw in place. Protanium steel, 20% stronger. Proguard rust protection.
PBLX 9:1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm
PBLX 13:.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, ¼, 5/16, 3/8"

Allen key set bondhus

Allen key set bondhus

Drive Socket Set Ironside 1/4", 1/2" Drive 57 pieces

Drive Socket Set Ironside 1/4", 1/2" Drive 57 pieces

Art. no.: 748660

Bit/socket set ironside 1/4"

Bit/socket set ironside 1/4"

Art. no.: 280296

Plastic cassette with belt clips containing 29 parts. Mini ratchet wrench for bits and sockets, magnetic bit holder, 1/4"x5/16" adapter, 6 count 1/4" Super Lock case 6, 7, 8, 10, 12, 13 mm.
20 count 25 mm long bits of alloyed special steel: Straight heads 3, 4 ,5. Phillips 1, 2 (2 count), 3. Pozidriv no. 1, 2 (2 pcs), 3. Allen 3, 4, 5, 6. Torx with hole 15, 20, 25, 27, 30.

Puller Set PELA

Puller Set PELA

Art. no.: 36117197

Torque Click Wrench Bahco 7455

Torque Click Wrench Bahco 7455

Art. no.: 542057

Bit Holder Wera 817R

Bit Holder Wera 817R

Art. no.: 70654587

Bit handle with bayonet blade featuring a quick-change chuck, which can retract into the grip to enable work even in confined spaces. The Rapidaptor quick-release allows for quick and easy bit changes. Strong magnet holds the bits in place. Ergonomic Kraftform Plus grip. Hard grip zones for high working speed, while soft grip zones provide high torque transfer. Suitable for bits with 1/4" hex drive.

Crimptang Knipex 9753

Crimptang Knipex 9753

Art. no.: 365227

Crimping tool for end sleeves. Automatic self-setting on the used end sleeves. 975304: Rectangular crimping for optimal contact surface in the clamp connection, 0,08-10 / 16 mm², AWG 28-7 / 5. 975314: Hexagonal crimping for connection in confined spaces, 0,08-10 mm², AWG 28-7.

Multitool Gerber Center Drive

Multitool Gerber Center Drive

Art. no.: 81253055

Water pump plier knipex

Water pump plier knipex

Art. no.: 274819

Chromium vanadium steel. With quick setting. Grooved alligator jaws with patented pipe grip. Self-locking. Comes with pinching protection. Plastic coated flaps Shared sliding joint.

Water pump plier knipex

Water pump plier knipex

Water pump plier knipex

Water pump plier knipex

Water pump plier knipex

Torque wrench kit Wiha 2872 T18 VDE

Torque wrench kit Wiha 2872 T18 VDE

Art. no.: 617206

Polygriptang Ironside Quick Inst

Polygriptang Ironside Quick Inst

Art. no.: 416588

Made of vanadium steel with polished protective lacquered head. Extra large grip width and quick installation. Plastic covered grip.

Blind River Nut Plier POP PNT110X

Blind River Nut Plier POP PNT110X

Art. no.: 76485404

Knife Set Gerber Suspension NXT + Paraframe I

Knife Set Gerber Suspension NXT + Paraframe I

Art. no.: 82352039

Gerber Suspension NXT and Paraframe I are supplied as a combined kit for use in construction, industry, service work, and outdoor activities.
The Suspension NXT is a multi‑tool with 15 integrated functions, including spring‑loaded needle‑nose pliers, wire cutters, scissors, multiple flathead screwdriver sizes, Phillips screwdriver, ruler, file, wire stripper, awl, bottle opener, can opener, and a partially serrated blade. The tool features a butterfly opening and a locking mechanism that keeps the selected tool securely in place during use. A belt clip and lanyard hole make it easy to carry.
The Paraframe I is a folding knife with an open‑frame design that reduces weight and makes cleaning easier. The knife has a plain stainless‑steel blade and a handle made of the same material. The total length is 17.8 cm, the blade length is 7.6 cm, and the weight is 73 grams. The knife is equipped with a clip for attachment to a belt or pocket.

Circlip plier bent Knipex

Circlip plier bent Knipex

Art. no.: 258809

Entirely forged shanks made from vanadium steel. Spring steel tips. Polished head. For internal track ring. With plastic coated shanks.

Circlip plier bent Knipex

Shell tools ironside for

Shell tools ironside for

Art. no.: 357634

For simple and quick installation of cables and plastic-insulated copper pipes. Round cuts and side cuts in one working operation. With cutting depth adjustment screw. 4-16 holes for cable diameters 8-28 mm respectively.

Plier Set Ironside 3-Pack

Plier Set Ironside 3-Pack

Art. no.: 900311

Allen key

Art. no.: 105412

Chromium vanadium steel. Ground wrench ends. Dimension-labeled. Black.

Torque Screwdriver Wera Serie 7400

Torque Screwdriver Wera Serie 7400

Art. no.: 75157592

Torque Screwdriver Wera Serie 7400

Torque Screwdriver Wera Serie 7400

Drive Socket Set Ironside 1/2" Modular 28 pieces

Drive Socket Set Ironside 1/2" Modular 28 pieces

Art. no.: 749151

Torque screwdriver set Wera KK Safe-Torque Speed VDE

Torque screwdriver set Wera KK Safe-Torque Speed VDE

Art. no.: 1666353

KK VDE set with 23 parts. 1 Safe-Torque Speed torque screwdriver 7508 VDE with five selectable maximum torque settings (.4; .8; 1.2; 1.6; 2. Nm), 1 Safe-Torque Speed torque screwdriver 7516 VDE with five selectable maximum torque settings (2.4; 2.8; 3.2; 3.6; 4. Nm), both with a fixed position (Torque Lock) for unlimited loosening/tightening torque, numeric torque indication, reliable slip when preset torque is achieved, 1 hand holder 817 VDE. Torque screwdriver and hand holder only for Wera VDE interchangeable blades. 20 VDE interchangeable blades (157 mm long) with Take it easy tool finder: color coding by profile and laser-marked size indication, predominantly with reduced blade diameter, making it easy to access deeply embedded screws and springs. In a robust textile box for protected storage and convenient transport.

Contains:

7508 VDE Kraftform Safe-Torque Speed torque screwdriver, 0.4-2.0 Nm
1x 9 x 0.4 Nm x 0.8 Nm x 1.2 Nm x 1.6 Nm x 2.0 Nm x 192 mm

7516 VDE Kraftform Safe-Torque Speed torque screwdriver, 2.4-4.0 Nm
1x 9 x 2.4 Nm x 2.8 Nm x 3.2 Nm x 3.6 Nm x 4.0 Nm x 192 mm

817 VDE Kraftform handle
1x 9 x 98 mm

Kraftform Kompakt VDE 62 iS Take it easy
1x PH 1 x 157 mm
1x PH 2 x 157 mm

Kraftform Kompakt VDE 65 iS Take it easy
1x PZ 1 x 157 mm
1x PZ 2 x 157 mm

Kraftform Kompakt VDE 62 iS PH/S Take it easy
1x # 1 x 157 mm
1x # 2 x 157 mm

Kraftform Kompakt VDE 65 iS PZ/S Take it easy
1x # 1 x 157 mm
1x # 2 x 157 mm

Kraftform Kompakt VDE 67 iS TORX® "Take it easy"
1x TX 15 x 157 mm
1x TX 20 x 157 mm
1x TX 25 x 157 mm

Kraftform Kompakt VDE 67 i TORX® "Take it easy"
1x TX 10 x 157 mm
1x TX 30 x 157 mm

Kraftform Kompakt VDE 64 i Take it easy
1x 2.5 x 157 mm
1x 3 x 157 mm
1x 4 x 157 mm
1x 5 x 157 mm

Kraftform Kompakt VDE 60 iS Take it easy
1x 0.6 x 3.5 x 157 mm
1x 0.8 x 4 x 157 mm
1x 1 x 5.5 x 157 mm

Torque screwdriver set Wiha TorqueVario 13 pcs

Torque screwdriver set Wiha TorqueVario 13 pcs

Art. no.: 633709

The tool kit includes an ergonomically designed screwdriver handle with a numerical scale, 9 slimBits, a bit holder, adjustment tool, and a SoftFinish® electric slimVario screwdriver with bit holder for slimBits. All components are practically and clearly arranged in a durable high-quality case, including a manufacturer's inspection report. The torque screwdriver VDE covers a wide range of applications with a flexibly adjustable torque range of 0.8–5.0 Nm. A clear acoustic signal, which is also felt when the torque is triggered, ensures a process-safe torque mechanism, protecting against material damage and rework. With a release accuracy of +/- 6%, the torque tool meets the requirements of SS-EN ISO 6789. The insulated ClicFix bit holder ensures that the 75 mm long slimBits are securely held thanks to a mechanical blade lock. Both the torque screwdriver and slimBits undergo individual inspection according to the international standard IEC 60900, enabling safe work on live parts up to 1,000 V AC.

Includes:
- 1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit .8 - 5
- 1x Adjustment tool for torque screwdriver with longitudinal handle 90 mm
- 1x Screwdriver SoftFinish® slimVario® electric for slimBits 6. mm
- 1x Adapter TorqueVario-S electric for slimBits 6. mm
- 1x Bit slimBit electric Slot 2.5 mm x 75 mm
- 1x Bit slimBit electric Slot 3.5 mm x 75 mm
- 1x Bit slimBit electric Slot 5.5 mm x 75 mm
- 1x Bit slimBit electric Phillips PH1 x 75 mm
- 1x Bit slimBit electric Phillips PH2 x 75 mm
- 1x Bit slimBit electric Pozidriv PZ1 x 75 mm
- 1x Bit slimBit electric Pozidriv PZ2 x 75 mm
- 1x Bit slimBit electric PlusMinus/Pozidriv SL/PZ1 x 75 mm
- 1x Bit slimBit electric PlusMinus/Pozidriv SL/PZ2 x 75 mm
- 1x Folding case

Templates HIT

Art. no.: 1779130

Templates for burr-free cutting of zinc-galvanised threaded rods in grades 4.6, 5.8 and 8.8. Suitable for threaded rod cutter HIT.

Screwdriver Ironside SZG 1000V

Screwdriver Ironside SZG 1000V

Art. no.: 897512

With extra thin round blade, completely without collar, made of specially hardened chrome molybdenum vanadium steel. Slim, ergonomically designed soft grip in three-component material with roll stop. Insulated and approved for work under voltage up to 1000V.

Screwdriver Ironside SZG 1000V

U-key set Wera Joker 6004

U-key set Wera Joker 6004

Art. no.: 725491

Set containing automatic and continuously self-adjusting wrenches. The parallel-guided smooth jaws provide effective surface pressure, thus preventing damage to the nut or screw head. The ratchet function ensures fast and consistent screwing without the need for repositioning. The triangular grip recesses in the jaws provide a return angle of only 30°.
Contents:
6004 Joker XS self-adjusting open-end wrench:
- 1x 7-10 x 1/4-3/8" x 117 mm
6004 Joker S self-adjusting open-end wrench:
- 1x 10-13 x 7/16-1/2" x 154 mm
6004 Joker M self-adjusting open-end wrench:
- 1x 13-16 x 1/2-5/8" x 188 mm
6004 Joker L self-adjusting open-end wrench:
- 1x 16-19 x 224 mm

Ratcheting Screwdriver Ironside with 12 Bits

Ratcheting Screwdriver Ironside with 12 Bits

Art. no.: 569082

Drive Socket Set Ironside 1" 15 pieces

Drive Socket Set Ironside 1" 15 pieces

Art. no.: 542253

Multitool Ironside 16 tools

Multitool Ironside 16 tools

Art. no.: 79207600

Well-equipped multitool with 16 tools. A sturdy locking system to ensure safe and stable handling of the tool.
Tools:
- Pliers
- Wire cutter
- Knife
- Saw
- Nail file
- Flat screwdriver 5mm
- Flat screwdriver 4mm
- Flat screwdriver 3mm
- Can opener
- Bottle opener
- Rope cutter
- PH screwdriver
- Awl-reamer
- Ruler

Wrecking bar Hultafors steel

Wrecking bar Hultafors steel

Art. no.: 162182

Octagonal highly alloyed drill steel. Hardened and annealed. Finely sanded, clear lacquered work surface. Red powder coating.

Wrecking bar Hultafors steel

Wrecking bar Hultafors steel

Wrecking bar Hultafors steel

Wrecking bar Hultafors steel

Wrecking bar Hultafors steel

Stripping tool Stripax

Stripping tool Stripax

Art. no.: 1620490

Striping and cutting tool for PVC-insulated cables between 0.08-10 mm². Adjustable stripping length. The stripping jaws open automatically after each completed strip. Automatic adjustment of the stripping knife. Ergonomic design. Also strips double-insulated conductors.

Stripping tool Stripax

Showing 52 of 2071